Router DHCP Straight Through / Cross Over

Hi All
I am encountering a very strange issue. I've configured our 1921 router with DHCP. Then I've connected my laptop (to test) using a straight through and cross over to the router, but it doesn't pull an IP. I followed the commands and verified it from several sites. What else could be wrong?
ip dhcp pool DHCPPOOL
network 192.168.1.0 255.255.255.0
dns-server 4.2.2.2
default-router 192.168.1.1
ip dhcp excluded-addrss 192.168.1.1 192.168.1.99
service dhcp
Appreciate any input!

Current configuration : 3860 bytes
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Router
boot-start-marker
boot-end-marker
no aaa new-model
no ipv6 cef
ip dhcp excluded-address 192.168.1.1 192.168.1.99
ip dhcp excluded-address 192.68.1.150 192.168.1.254
ip dhcp pool DHCP-POOL
network 192.168.1.0 255.255.255.0
dns-server 66.80.131.5 66.80.130.23 64.7.11.2
lease 7
no ip domain lookup
ip cef
multilink bundle-name authenticated
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1406017923
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1406017923
revocation-check none
rsakeypair TP-self-signed-1406017923
crypto pki certificate chain TP-self-signed-1406017923
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 0505003
quit
license udi pid CISCO1921/K9 sn XXXXXXXXXXXXX
username grant privilege 15 secret 5 $1$LgZ4$UXZanBF9.F45dXzBT1Fqy.
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/0/0
ip address x.x.x.82 255.255.255.240
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/0/0 overload
ip nat inside source static tcp 192.168.1.18 3389 x.x.x.84 3389 extendable
ip nat inside source static tcp 192.168.1.21 3389 x.x.x.85 3389 extendable
ip nat inside source static tcp 192.168.1.24 3389 x.x.x.86 3389 extendable
ip nat inside source static tcp 192.168.1.45 3389 x.x.x.87 3389 extendable
ip route 0.0.0.0 0.0.0.0 x.x.x.81
access-list 1 permit 192.168.1.0 0.0.0.255
control-plane
line con 0
login local
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
login local
transport input all
scheduler allocate 20000 1000
end
Router#

Similar Messages

I want to configure my compact rio through cross over cable but i can't

I m trying to connect Crio 9014 to my computer using crossover cable.
but it give me error and the cards connceted through it can't be see by on MAX.
Give me some helpful suggestions

Hi,
You could check this out first => http://www.ni.com/gettingstarted/setuphardware/compactrio/firstuse.htm
-Matti

PC to Router cross over or Straight thro ???

Hi Friends,
I am a newbie, my question can make u laughing. I was trying to install DHCP on an router and i plugged the straight thro cable into the Ethernet interface of the router. Fortunately i got the ip address from the range i assigned.
After a while, i am surprised how can this work. Then i replaced with a cross over and that also works.
Plz tell me how is this possible.
Bye
Rajesh

Auto MDIX could be enabled on one of the devices. But have you verified whether the straight through cable's pinouts ?
Try plugging the straight through cable into two ports of the same switch or hub. If its a cross cable both ports should come up.(LED should be lit)

Use of straight through and cross over cable

hi,
according to icnd1, we need to use crossover cable to connect similar devices, lets say router to router or switch to swicth..
does this really matter? I mean, what if i use straight through cable to connect one switch to another?
thanks

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Hmm, I don't know, does it really matter whether the link between devices can be used? (Laugh)
As the other posters have noted, many (newer) devices now support auto MDI/MDIX, but some don't. (Also, on devices that do, auto negotiation might be required to be enabled.) Some older devices sometimes have "special" uplink ports or manual method to switch the port's MDI/MDIX setting, and for those, too, you can use a strait through cable.
If none of the above, however, you'll need a cross over cable for "similar" device types, i.e. those whose tx/rx pins, on the port, are the same.
You need a cross over cable if both sides are MDI or MDIX (i.e. the same), straight cable if both sides are different.

Mac pro - powerbook g4 - networking with cross-over cable

I connect my powerbook to the Mac pro with a cross-over cable.
Personal file sharing is on both computers (both Mac osx 10.4.8)
Question 1:
While most of the time I can make the connection work I still don't understand the logic behind it.
Sometimes I connect and the connection works immediately, on other occasion I have to restart one of the macs or both to make it work.
Is there another solution then restarting?
Please enlight me on the subject.
Question 2:
My Macpro is connected to the internet (to a ethernet-router up the line, I can not pull another cable from the router because all the ports are busy).
My powerbook is connected to the Macpro with the cross-over cable.
Can I access the internet on my powerbook through the cross-over cable. I already tried the Internet Sharing on/off thing but I couldn't make it work.
Thank you all for sharing your knowledge on the subject.
Eugene
Mac pro 2,66 Mac OS X (10.4.7) owerbook g4 12i

Hello Eugene,
Just a quick note to let you know you and others know that you do not need a cross-over Ethernet cable to connect your Mac Pro to another device. The idea of using a cross-over cable is a hold over from bygone days of Ethernet ports and products that either were before the auto-mdix or just did not implement them to save cost. Auto mdix Ethernet ports (which the Mac Pro, and every current Mac computer has) are able to detect the type of cabling/connection, and auto configure the Ethernet port for the proper connection. This mean you can use a regular Ethernet patch cable and not be concerned if it is a straight thru or cross-over style.
As for sharing your internet connection using your Mac Pro, yes, it can be done, and the capability is included with OS X. You can find step by step instructions by accessing the Help menu in the finder and entering "sharing Internet" (without the quotes).
However, I would suggest you just buy an inexpensive Ethernet Switch, to use to expand the number of ports available from your router, and then run a line to your other computer.
Tom N.

Multiple DHCP Subnet through V lan

Dear All,
i like to request a help, i am not good in cisco anyone can explain me it will help for me.
i am trying to configure muliple dhcp subent through Valn
1. i create a dhcp server and create 3 subetnet
a. my network card ip 192.168.50.200 dhcp enabled
b . configure DHCP scope for 192.168.20.0 and 192.168.30.0
2. i have sonicwall firewall with router there i create 2 valn .
3. cisco switch sg300-28p also create valn. ( valn 20 port 3-5) (Vlan 30 port 7-10) create a trunk port for both Vlan port number 2.
i give conection from sonicwall to switch trunk port 2 and connect laptop to valn 20 port i am getting 192.168.20.0 range ip, if i connect to laptop to Vlan 30 also getting Vlan 30 range IP.( this time Sonicwall DHCP is enabled)
now come to the point, i need to relase DHCP from my server, so i disable dhcp from Sonicwall. and enable dhcp from server.
but i am not getting ip address from server to any valn.
i create a trunk port for DHCP server and connect to there. then also same problem
please help to configure the best way.

what you have to do is configure ip helper addresses on your vlans to point to the new server, it was probably pointing to your sonicwall which is why it was working on the sonicwall, but once you changed over to your server, you have to convert it over to your new dhcp server.
without port forwarding your switches/routers do not know where to send those requests, especially if they are on different vlans. thats one ceveat to running vlans and switches, it doesnt like flooding out requests to every port.
it appears to be under:
ip config - udp relay/ip helper
that section, add your new dhcp server to that and it should fix it so it sends your dhcp requests to your dhcp server.

Networking via cross-over ethernet

I have two PCs both running Windows 7 Pro 64 bit. Both are fully updated.
One connects via wireless adapter to a router at the other end of my house (not practical to connect it via ethernet).
The router gets my ISP signal and is my Internet access point.
The other PC is in the same room but has no wireless adapter (I know I could just get one, but that is not what I want to do here).
The two PCs are close enough that I can easily connect them directly to each other with an ethernet cable.
I tried a regular cable but connecting gave me problems so I used a cross-over cable to connect them.
My original intent was to be able file access & sharing of the (let's call it guest PC) and the one with the wireless internet access (let's call it the host).
When I rebooted both I was able to open the explorer and see the host computer from the guest and vice versa on the Network list. I allowed file sharing and everything looked great.
I mapped the user and file locations from the guest that I wanted in the host PC as a network drive on the host.
Since I wasn't regularly using the guest, it went to sleep and I could not re-establish the mapped network drives nor the shared file connection. That was a pain, so I set out on another option.
I set up a Home network in the guest PC that is now accessing the Internet.
OK, I'm not exactly sure how I did that. I kept creating unidentified public networks and finally was able to create a private one on the guest that connects (I'm not sure if it was by sharing or merging) to the Internet. It has to be somehow shared
because (as I mentioned above) the guest has no wireless adapter and no other way to get Internet except by sharing the host PC's wireless access.
Well, the drives that I had mapped before setting up the Internet sharing suddenly work again fine.
But, AND HERE'S MY CURRENT PROBLEM, I cannot see the guest computer from the host in the explorer (or the other way either).
I tried then to just join the host computer's HomeGroup, but I can't. I can't join a HomeGroup created on the guest either.
I'd like to be able to view and share my files across both the host and guest.
I'd even like to be able to remote access the guest desktop from the host. (I know I can do that with LogMeIn, TeamViewer, VNC, and other programs).
I also know I can share files using Hamachi (but it does not give remote desktop control so I can't run programs).
Can anybody help me on this? Or is it impossible to use a cross-over ethernet connection between two PCs and have them both share files and be visible either browsing on the Network or in a HomeGroup?

Thanks, I have never solved this. I did check your links. At one point at least I was able to share my wireless connection, but I don't know how I did it and now I have even lost that trying to fix the fact that I could not actually network the two PCs.
Again, both running Windows 7. One has wireless adapter & connects to Internet through router - no problem there.
Second PC has no wireless adapter. I wanted to use cross over ethernet cable to connect it directly to the one that has Internet access. The idea was twofold: first, setting up a peer to peer local network with both PCs on it so I could directly open &
share files from one to the other. I fiddled so much that now I'm getting a message that the PC without the WiFi adapter does not have a valid IP address.
My second (and actually more important goal) was to allow the PC without the WiFi adapter to share the other PC's Internet connection. I did something with the merging option that made it work but I don't know for the life of me what it was. I kept having
trouble with the new network defaulting to Public and I could not change it to Private. That gave me all kinds of problems trying to create and join a HomeGroup. I could create them in each PC but neither could join the other's created HomeGroup.
Now I'm back to square one, or even worse since I can't get either of my goals solved. If it's impossible to network them P2P I'd at least like to share the Internet connection using the cross-over cable as I had it for a few days.

Satellite C660D-1GD: no sound and Red Cross over speaker

Just turned on my Laptop, Satellite C660D - 1GD and my sound isn't working.
There is a red cross over the speaker and the diagnosis didn't help at all.
Tried a system restore, nothing - no change at all. Tried going through the system drivers and there is no driver for sound :o. Ok, came to this site, downloaded the correct driver, installed and restarted and nothing again :s .
Updated the BIOS and then went into and checked the BIOS, and even checked for simple sound to just have my time wasted. Any help would be great.
Thanks in advance.

_Firstly:_
Did you check if mute isnt enabled?
Press FN + ESC to enable or disable mute
_Secondly:_
Go to control panel -> sound -> Playback tab
Check if the devices in the playback tab are activated and set as default device
Additionally click right to ensure that options are marked like; show hidden devices, show disabled devices
_Thirdly:_
The sound card is from Realtek.
So you can download the Realtek HD audio driver from Realtek driver page
Before installing new driver, uninstall installed Realtek driver from control panel -> programs & features

Rollover cable and cross over cable

If I have OOB coonection from a terminal server to a router's console port, do I need to use rollover cable? how about if there's a patch panel betwn terminal server and the router, what cable should I use?

Start simple: if it was a term server and a router (via console), the octal serial cable goes directly into the console port of 2500, 2600 ... anything with an RJ45-style port..
If the console is something like a 6500 or 7500, then you'd need an adapter to a db25 connector.
If you were going directly from a PC (db9f)to an RJ45-style console, it's via a "rolled" cable (reverse the pin order, 1-8, 2-7,3-6, etc) which is most often a powder blue flat cable.
Now, if you need to extend those connections, anything that ultimately results in a "straight through" extension should work, if it's not too long.
So, whatever cable you'd normally use, with whatever "straight-through" assemblies you use to create an extension.
Good Luck
Scott

Red Cross over my files

I keep getting this Red Cross over my files in CC. It's still there when I export it.
went through all layers, it ain't there by me. Anybody now what it is and how I can take it away?

I will repeat what Dave said and what has been said hundreds of times on this and other forums. If there's a Red Cross or other watermark on your project then you have a plug-in that is not been paid for or registered That's all it is to it.

OT(ish): crossing over to T-SQL development

apologies for the off-topic, I've been into oracle development for a few years but am now looking at picking up some Sql server (development) skills.
I'd assume there's a few people on here who work with both, or have done through their careers.
So I was just wondering if anyone here has done this before, ie. spent years in Oracle then crossed over/picked up Sql Server. If so, have you got any...
- books/websites you'd recommend
- success / horror stories
- advice on common pitfalls / things to watch out for / things I should find familiar?
- etc?
thanks in advance.
Edited by: smon on Feb 18, 2010 1:24 AM

smon wrote:
... am now looking at picking up some Sql server (development) skills.
- books/websites you'd recommend
Quite a few Microsoft MVPs have written books on SQL Server programming, T-SQL etc.
- Kathi Kellenberger's book "Beginning T-SQL 2008" starts with installation of SQL Server Express and the basics of T-SQL. It's for guys who have absolutely no idea of where to start.
- The Microsoft MSDN Library is very good, and should be an invaluable resource.
- The 3 books by Itzik Ben-Gan are good too, for his lucid writing style and good depth of topics.
- For the advanced, there is "SQL Server MVP Deep Dives" - an anthology of SQL Server topics written by 53 MVPs.
The last chapter of Kathi's book is titled "Where to go next" and it lists down the websites, the forums, blogs etc. that provide a wealth of information on T-SQL and Sql Server. Or you may google "sql server websites".
HTH,
isotope
Thought I should've mentioned Itzik's books:
(1) Microsoft SQL Server 2008 T-SQL Fundamentals (PRO-Developer)
(2) Inside Microsoft SQL Server 2008: T-SQL Querying
(3) Inside Microsoft SQL Server 2008: T-SQL Programming
You probably know the URL to MSDN, but anyway -
http://msdn.microsoft.com/en-us/sqlserver/default.aspx
Edited by: isotope on Feb 18, 2010 6:07 AM

Cross over cable

Do I need a cross over cable to connect my cable router to my Time Capsule via the WAN port on each unit ?

No.
Use a regular CAT5e or CAT6 Ethernet cable.

Virus that wants to instal in cross over

I went to a site that redirected me to belay-one.ru/bio/invest.php
After that when I am browsing 3 crossover windows pop up and wants to install a window application.
On the bottom of the folder it says vbfolder_1s6ul What is going on. I thought that Apple doesn't have varuses.
I can not locate the windows exe file, that I could delete that annoyong pop up. I reinstalled FireFox, and it looks like its OK browsing with FF
But on Safari is still pops up now and then and wants to install. I can not reinstall Safari through time machine, it would not let me.
Any help is appreciated.

Since I have Cross Over installed it tries to install when I am on Safari, Wow!
It is still not clear to me whether you were running the windows version of safari under crossover or running safari under mac os. If mac os it is not causing nor going to cause any problems even if you start running crossover.
BTW, I was not on Russian site, Its my friends site and its called www.contractors4kids.org There is a button called Find Out More, where it redirect to another site that was hijact and sends viruses. Please don't go there...
Your original post said there was redirection to "belay-one.ru/bio/invest.php" so the .ru is the designation for a Russian site.
The task is to find this EXE file
If you can't find it it may not have downloaded. I showed you how to search for it . I also said that if the safari download preference has not been chaned in os x safari (assuming that is what you were running) it should be in Downloads in your home directory.
If you want another search tool then get Find any File. It will look in places spotlight doesn't normally index.

HT201272 I cant download my purchased music onto my new iPhone 5. I bought almost all my music through iTunes over my phone but it wont let me download "ALL"--I have to go in individually to each album.

I cant download my purchased music onto my new iPhone 5. I bought almost all my music through iTunes over my phone but it wont let me download "ALL"--I have to go in individually to each album. Can anyone help me figure out how to do a single "ALL" music download?
I even tried synching from mt computer backup but it wont do it.

You can only sync everything with your one syncing computer/iTunes library. Yu can:
- Make this your syncing computer by:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
- Use the manual method to copy music and videos from any computer/iTunes library to the iPod. See the manual method included here:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

How can i get my items to stay in place and not cross over each other when readjusting the browser s

How can i get my items to stay in place and not cross over each other when readjusting the browser size.
Basically on my site when i go from a small screen to a big screen everything doesn't adjust to the screen size. I don't know what im missing
Here's the link to the page all the pages & they all do it
http://theatricalworkslive.com/
Thanks in advance

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Router DHCP Straight Through / Cross Over

Similar Messages

Maybe you are looking for