Router Not Detected (Desperate Help Needed)

This is the third Router I've bought and so far all three have given me problems. I have a WTGS54 v7 Router. On the day I bought it, I popped in the CD and immediately I had a problem. It said it couldn't detect my router and thus I couldn't go through with the full installation. Now everything is hooked up properly and I've checked about a billion times and even called customer support to make sure it was hooked up correctly. The CD installation won't go past the 'Configuring the router' stage. The strange thing is, the internet is working and my sister can access the internet via the router as well despite that it was never even completely installed. I figured since everything was working properly, I could just put the problem that it couldn't detect my Router behind me. However, at this point a few months later it's starting to give me issues. The connection is intermittent, lagy, and inconsistent. On Port 1 (My port), the led is flickering rapidly. On port 2(My sister's port), the led flickers although not merely as often as mine does. So that was basically and overview of the situation. My real question and problem that needs to be resolved is, why is my Router not detected during the CD installation yet my internet works (Although now lagging). What can I do to fix this? (BTW, I installed firmware but nothing happened.)

Due to some firewall issue or any other error ..... the CD does not work ...... if already one computer is working fine with router ..... no need to again rune the Disc of the router .....
Now if the router is not showing connection on any computer .....
Reset the router for 20-30 seconds ..... after reset reconfigure the router using CD of the router ..... if it still not works .... use another computer .....
Let me know if it works .....

Similar Messages

My Flash player will not download. desperate help needed

I am at a complete loss as to what to do. Flash will not download on my PC windows 7 computer no matter how many times I try. I click on the link and go through the whole process of downloading the installation file but then nothing happens just a big black box popping up with no prompts and nothing being installed. I am at my wit's end and am in desperate need of what's wrong. Is it my anti virus software? Is it my firefox? I am in desperate need of help. Please advise ASAP.
Ken

The current version of Flash isn’t compatible with Mac OS X 10.5.8. Click here to check if there’s a compatible update.
(109033)

Router not detected

I need help. The software doesn't detect the router. I know I've followed all directions correctly; I've reset the router and my computer several times. It always gets to 9% when it's detecting the router, then it says "router not detected. Make sure all cables are plugged in correctly." All my cables are plugged in correctly. I am so frustrated. My cable internet company is not helpful because the router is not their product. I wonder is something is faulty with my router.

I have the same problem and have exhausted all strategies for successfully having the Linksys Easylink Advisor detect my brand new WRT300N wireless router.
I have my A+, Network+ and MCSA certifications, so I don't think you are doing anything wrong, Kristen.
The Web interface works (http://192.168.1.1/) and the router is active and working.
Their little buggy app doesn't detect the router, period. It did for a month or so and then stopped. I have the latest firmware installed and the app phones home to update itself. I do not know at what point it stopped working. Sure is annoying and a waste of our time.
Message Edited by Ezn on 05-03-2008 09:21 AM

Router Not Detected ....grrrr

ok i have read many things on this site so here we go Router WRT54GS OS - windows xp Pro power light - ON WLAN - ON 1- on 2 - off (other pc is off (Using Wireless G USB -WUSB54GC) ISP Comcast ... internet still works.... (im on it now with router) During CD setup goes through all good untill ......."router Not Detected" Help?

If you are already online with the router ...... i think no need to run the CD .... also you can tell me what are the different settings you want to use from the router setup ....
Possibly i can help you further ....
Message Edited by forsaken on 06-24-2008 12:43 PM

WRT 110 - New Router not detected

I am having problems with the setup wizard. Im getting "New router not detected". It's all setup correctly. I've reset modem, router and rebooted 100 times atleast. I can get on the internet when the modem is conected through the router. Also, I cant get to the 192.168.1.1 router setup. I have set up other linksys routers without problems. We are on Time Warner cable internet. Please help before I smash this thing.

I have an older Linksys (twin antenas) product so bought this for my son in Ohio. He tried to connect the router using his laptop and could not do it...after calling support (Punjab in India) they could not resolve the problem or begin to figure it out. After watching a 6 year old on YouTube hook up a router, I figured it couldn't be that hard so I told him to send the WRT 110 to me along with his laptop.
After trying the install myself (using the supplied CD), I could not connect to the internet via the wired laptop-router-modem either. So I figured the wireless device of the laptop may be interfering with the router. So I went to Control Panel>>Network Connections>> and right clicked on "Wireless Connection" and clicked "DISABLE". After that, the laptop DID connect to the internet via the ethernet cable.
When I tried to login to the new wireless network using another laptop, I could not connect after repeated attempts using the letter "O" and the number "0" of the WEP code generated by the CD install. I finally COPIED and PASTED the WEP code to a Word document, saved to a stick, then transfered the doc to the wireless laptop. After COPY and PASTE of the WEP code to the LOGIN >>>SUCCESS.
The wireless connection works fine two floors away from the router as does my old antenna router did, so the "range" problem reported by others is a mystery to me. Don't know why the "support" couldn't have solved this problem....I'm not a real computer nerd, but can do "trial and error" fixes.
Bottom line: router works fine and is better looking than the "antenna" ones but who cares??? I go for the blinking lights anyway <g>

LELA "Router Not Detected"

I just purchased a Linksys WRT54G V8.2 router. I just opened the box and have been attempting to get the wireless network setup.
I am currently posting as I am connected via eathernet cable though the WRT54G router
My problem is when I attempt to set this up using the LELA, I keep getting the "Router Not Detected" error. Everything is plugged in, all lighs are on. As I said, I am currently connected to the internet using this router, but with a wired ethernet cable, I cannot get the wireless setup.
LELA will not let me do anything until it can detect the router, can anyone help me figure out what is wrong here?
Thanks.

I'm having the same issue.
My router works fine and I can log into it from a web page but each time I try to install Lela, it will not detect the router (even though all of the required lights are on/blinking, etc).
I have uninstalled Lela, rebooted, and cleared out the Registry.
I have tried multiple router resets and have also updated the firmware.

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

Wireless router not detected

I recently purchased a WRT54G router and tried to connect through my DSL connection. An error message came up and stated that the router was not detected. Repeated tries gave the same results.
I know that the cables were connected correctly.Can someone suggest trouble shooting?Calls to Linksys support have been unsuccessful.

Try disabling all firewalls on the computer, windows and any other you might be using. Still no luck try doing manual setup, as follows:
Connect modem to internet port on router, and connect computer to port 1 on router
Login to routers setup, by typing http://192.168.1.1 in internet explorer's address bar, use admin as password there without any user name
Here goto mac address clone in blue bar at top
Enable service, click on clone my pc's mac button, and save the settings
After that turn off modem and router, turn on modem first.
Turn on router after some time
Check internet if works

Server Timed Out, Router not detected

Ever since a heavy thunderstorm I have been unable to pick up wireless Internet on any of my wi-fi devices. I'm no longer able to access 192.168.1.1 through my Internet browser, when I tried to ping 192.168.1.1 it says Server Timed Out, and the LinkSys EasyLink Advisor program said my computer was unable to detect my router. Help?

Marcar,
its much easier for us to help if you give us a little detail. like the model & version of your device.
anyway, a thunderstorm aye?? ake sure that the router's power light is not blinking, if it is reset the router.
HOW TO RESET A ROUTER:
with router turned on, push on the little reset button on the back of the router (beside the wan/internet port). hold that button for about 30 seconds and then release and then turn the router off. leave it of for 20 seconds.
by then you can access the default IP of the router which is 192.168.1.1 (password: "admin").
BTW: before you reset the router make sure you know how to reconfigure it back again to work with the modem for your internet connection.

Desperate help needed....So frustrated

Please help, anyone.
All my equipment is brand new. My first concern is that there might be a hardware compatibility issue- which i hope is not the case, b/c i just dropped close to a grand for this whole system.
Anyway, here's my problem: my first time booting i used a win xp pro cd, it formatted the disk w/ no problems, then when it started to load the installation files it stopped at 62%. I then rebooted and went back to reformat the drive and reinstall xp. This happened at least 2x. Basically the furthest i've got was formatting the drive then the "dos" part of the xp setup, BUT right when it starts to load the "gui" aspect of the installation it reboots. It's like an infinite loop -without my touching it it would start the gui aspect, reboot, start up again etc..
I've also gotten 2 different Stop errors (after each one, i reformatted the drive and they havent repeated): Stop 0x00000024 and stop 0x0000000a.
Steps ive taken so far
-I have a cdrw drive and a dvd- i tried using each one
-switched the memory to a diff. slot
-reformatting
-setting the bios to optimal performance
PLEASE HELP--in any way you can-- I HAVE NO WHERE ELSE TO TURN.
I appreciate everyone's input and assistance in advance.
My specs:
ITEM# DESC.
11-144-026 CASE ASPIRE| XDREAMER II ATX BLK
http://www.newegg.com/app/viewProductDesc.asp?DEPA=1&sumit=Go&description=11%2D144%2D026&searchdepa=1
14-240-003 VGA INFO-TEK|GXCBE R9200SE 128M AGP
http://www.newegg.com/app/viewProductDesc.asp?DEPA=1&sumit=Go&description=14%2D240%2D003&searchdepa=1
19-116-159 CPU P4/2.6CGHz,800M 478P/512K HT RT
http://www.newegg.com/app/viewproduct.asp?DEPA=1&submit=Go&description=19%2D116%2D159
20-207-014 DDRAM 512MB|PC3200 32X8 KRETN RTL
http://www.newegg.com/app/viewProductDesc.asp?DEPA=1&sumit=Go&description=20%2D207%2D014&searchdepa=1
22-144-122 HD 80GB|WD 7200RPM 8MB WD800JB%
http://www.newegg.com/app/viewproduct.asp?DEPA=1&submit=Go&description=22%2D144%2D122
27-106-197 CDRW LITEON|52X32X52X LTR-52327S BK
http://www.newegg.com/app/viewproduct.asp?DEPA=1&submit=Go&description=27%2D106%2D197
27-131-603 DVD|LITE ON 16X XJ-HD166/165H BK%
http://www.newegg.com/app/viewproduct.asp?DEPA=1&submit=Go&description=27%2D131%2D603
MOBO:
MSI 648F Neo-L (601-6585F-020 ) P4 ATX

hi again, I truly want to thank Mr. Moleman and Reilly875 for posting responses.
After researching the topic all day at work, I found myself on my video card's website...here is a quote from the user guide:
"Do This First! To ensure a successful installation of your ATI Graphics Accelerator card, you MUST do the following BEFORE replacing your current graphics card with your new ATI card:
Install AGP Drivers for non-Intel Chipset Based Motherboards. Several AGP motherboard manufacturers use non-Intel AGP chipsets. Chipsets include those made by Acer Laboratories (ALI), Silicon Integrated Systems (SIS), and VIA Technologies, Inc. Each non-Intel chipset requires the installation of a custom Virtual GART (AGP) Driver. This driver is required by your new ATI card to function correctly with your motherboard. It is very important that the correct AGP driver be installed before installing an AGP video card in your system. This section applies to AGP Graphic Accelerator cards only. An incorrect or missing GART driver can result in AGP memory not being detected or a black screen after Windows® loads. "
I have a feeling this is the problem since my mobo is SIS648F- I have yet to try it though. Any thoughts?
How would i go about installing the proper driver w/o being able to load windows? (I don't have a floppy drive)
My 2nd thought is like Moleman and Reilly said- the ram; but i only have one so i can't take any out....yet. My thought was, prior to taking it out, manually tweaking the bios config to match my ram.
My 3rd thought is to upgrade the bios- i'm not sure what version i have off hand-that'll have to wait till i get back home.
Lastly (for now), if the agp update is indeed the solution, does that mean i need to go and download all the new updates from the MSI and SIS sites for each component?
Please, all feedback is greatly appreciated from anyone.

Automation Problem - Desperate Help Needed

Hi
Was wondering if anyone can help or has had the sameproblem?
I have nearly finished a remix project in Logic and I amcoming to the final stages of automating effects etc.
All of a sudden, my automation is not recording on certain tracks.
I am simply trying to automate the cut-off on the Filterplug-in, but have subsequently realised that it is also happening with volume and any other type of automation.
I thought it might be something to do with the massive synth– but the same is happening with the EXS and ES2 etc.
I have done a lot of testing and opened up a new project andcopied over the settings and midi-regions and automation records absolutely fine!
I even tried to get round it by sending the output to a bus and effecting the bus then trying to automate the bus once adding to the arrange! No Joy! Still failed?!
It seems that it is a bug within my project?!
A black line appears and even if I try and manually drawautomation the line just disappears.
It is definitely not what I am doing, as I have replicated the process in a fresh project and it works fine.
Are you only allowed so many channels of automation?
Funnily, during my testing when I try and delete the trackto start a fresh – it says – 'Do you want to delete automation'! but there isclearly none on display and I am not hearing any!
It feels like a bug – but wondered if anyone else had any issues?
It is only affecting certain tracks, but I cannot see a correlation between them?!
I am about to start replicating everything in a new project! Huge job – but I need to automate forthe final mix and its due by Friday – I am really frustrated by this!
Can Apple help me?
Thanks in advance
Steve

Steve,
I haven't seen this behavior before, but it sounds like a corrupted file. It doesn't happen often, but it does, and can happen.
If you are not having similar problems in a new template, than moving everything over to a new session would be advised, at this point.
Logic 9's new track import feature will make this A LOT easier than it ever was.
Read up on how this is done, but you should be able to copy EVERYTHING over to a new session in one swoop

Desperate Help Needed re CS6 Activation/Installation Problem

A few months ago, I purchased the full retail version of CS6 (Design Standard) for Windows. I installed it on a new clean computer running Windows 7 and activated and registered it. The installation, activation and registration process went smoothly, and initially everything seemed OK.
A little over a month ago, the nightmare started. Since then, each time I try to run any of the CS6 components, I get a message telling me it "thinks" I have the trial version installed (even though I actually installed and activated the full version) and asks me if I want to "start the trial" or "license this software." If I choose "license" it asks for my serial number (which has already been entered numerous times) and it then seems to be OK -- for a while. However, within a short period of time, the problem is back, and the cycle starts again.
I have tried on numerous occasions (and spent countless dozens of hours) attempting to resolve this through Adobe support, both via telephone and via "chat." Each time, I wind up telling the same story to several different people, re-explaining it until they apparently understand it, and then getting transferred around to several people until I finally get to somebody who, supposedly, can help. Then, that individual walks me through the same things that have already been tried several times before. Finally, I am assured that the problem has been fixed, and am also assured that they will keep the case open. Each time, the problem has not been fixed, and I find that the case has been closed (so that the only way I can try to communicate is by starting all over, wasting more hours trying to get through, and ultimately again getting to somebody who has no idea what to do other than to tell me to do the same things that have already proven themselves (several times) not to work).
The result of all this is that I have a $1200 piece of software which is totally useless.
Perhaps somebody from Adobe can help me with how to take this to the next level so that it gets to somebody with the knowledge to figure out how to fix the problem. If anybody other than from Adobe has dealt with a similar problem, any suggestions would be appreciated.
Robert Rothman (a very dissatisfied customer)
Edit: To be clear, this was not purchased via download; I installed from physical disks.

Rob you may find this interesting...Adobe Customer Care sent me an email today in reguards to the problem I (we) have all been having...entering serial number numerious times in order to launch the CS6 program. This is what they sent me...
"With this response, we believe your issue is resolved and have therefore closed your case 0183753409. If your support case has not been completed to your satisfaction or you should need to contact us on this issue again, please reference your case number. You can reopen your case up to 14 days after it has been closed."
Then they continue with...
"Thank you for contacting Adobe technical support.
Thank you for updating the dependency information. We discussed this case again with our development team and they have informed that we do not have a solution for this issue at this point in time. You need to enter the serial number and activate the software each time you launch a 64 bit CS6 application. I would like to tell you that this is a rare incident and we are extremely sorry for the inconvenience caused to you. We are closing this case now. We will get back to you once we have a fix for your issue.
I request you to contact us back via Live Chat for further questions."
So basically they are telling me (us) there is no fix and they do not have a plan for when there will be one, and that this problem is a rare incident. I'm not buying the rare incident statement what about you? I would be very interested to know just how many people out there are having this problem?
I am very disappointed in Adobe. How can they close my case saying the issue is resolved when infact it is not? I am also wondering why they have not already fixed this problem as it seems to have been around for quite awhile. Not really sure what else to do as Adobe seems not to be very concerned about customers spending hundreds of dollars for a program they know has this crazy annoying problem.
I've entered my serial number so many times I almost have the whole number memorized! What a pain to have to enter it about every other time I want to access my CS6 program! I'm a Very Very Unhappy Customer!!!
Good Luck Rob I hope you have better luck than me! I'm going to keep checking back to this posts discussion so if you do find a fix please post it here so we will all know about it. Thanks...
Jeff, Thanks, I did finally find a browser that would let me actually access my open (but now closed) case but I had to try three different ones before it worked. Google Chrome worked, Internet Explorer and Foxfire did not! FYI
Chesterr, I will try the steps you suggested but I do not have high hopes in them working to solve our problem. Thanks...

Micro Zen "not detected." Help plea

I know this topic has been beaten to death on the board and I've read and reinstalled etc but I'm seriously at a loss.
I got my Micro Zen player today and set it up. I installed the software and then plugged it in and got that annoying "device has malfunctioned and cannot be detected blah blah blah" message that everyone seems to get. So I uninstalled everything, reinstalled it tried again. No luck. I download the drivers and installed those, no luck, tried to reinstall the drivers on the CD, no luck. My sister got an identical mp3 player so I tried hers with the same result, tried using the cord that came with hers, tried using the CD that came with hers, tried using my digital camera's cord, tried multiple USB ports. I've probably tried a few other things but I've been working at this since this morning. Ick.
I haven't tested it on another computer, but I don't think that will make a difference. I need it specificlly on this computer (seeing as it's the only windows computer we own, the other is a fi've-year old iMac). And I don't think it's an issue with the player or cord since I'm getting the same result with two different players.
I'm running a Windows XP OS on a Dell computer that's under six month old.
Does anyone have an suggestions? <EM>Please?</EM> It would be muchly appreciated. If you feel the inclination, my screen name on AIM is x the lovelyLIZ. I'll have an away message up but if you could just leave a suggestion there I would eternally grateful. Or replying to this post work great too :smileytongue:
Thank you so much.

meika wrote:
I got my Micro Zen player today and set it up. I installed the software and then plugged it in and got that annoying "device has malfunctioned and cannot be detected blah blah blah" message that everyone seems to get.
Certainly not everyone! It's a rare error...
I haven't tested it on another computer, but I don't think that will make a difference. I need it specificlly on this computer (seeing as it's the only windows computer we own, the other is a fi've-year old iMac). And I don't think it's an issue with the player or cord since I'm getting the same result with two different players.
Chance are it's a USB compatibility problem. Check for motherboard BIOS updates, and USB chipset updates. Alternati'vely get a PCI USB2 card and fit that, they aren't expensi've.

OSS Notes issue.. help needed

Hello,
Regarding OSS Notes:398217, When I open this oss notes, the status is showing "Cannot be implemented', when I try to implement it is showing message "SAP Note does not contain valid correction instructions'. What will be the issue here? Please help me.
Thanks,
Shreekant

Hi Shreekant,
There could be two reasons:
Reaons 1:
Not all SAP notes involve changes to programs, some notes can also involve make configuration (SPRO) changes which need to be done manually by the system user. Hence if the note is the type, then you cannot implement it, but need to read the note and implement the correction instructions manually.
Reason 2:
The SAP version is higher than the version for which the SAP note is intended.
Now here note 398217 does make changes in a program however it's version is upto 4.6C. You can check program RLMOBINV from SE38 and go to subroutine UPDATE_TO_DATABASE and check whether the chnage indicated by the note has already been implemented. If your SAP version is > 46C then it has and hence SAP wont allow you to implement a obsolete note for this version.
Cheers,
Aditya

MacBook Pro 13 Early 2011 Battery Degradation to Not Detected, User Replaced New Battery also Not Detected, Please Help!

I have a MBP early 2011 13 inch and do not have Apple Care. After I installed Mountain Lion I noticed the battery health was dropping pretty rapidly, with a service battery warning. I tried resetting the SMC and PRAM and even a clean install. I took it into an Apple store and they said I should have cycled it more, but I could still use it. The health dropped and dropped until a battery would not even be detected. Because Apple would not replace it for me for free and I didn't want to pay for them to do so, I bought my own battery. Once I replaced the battery with the new one, it still says there is no battery connected.
When I detach the battery and then attach it again, the battery indicator lights on the side show 4 dots. When I plugged in the MagSafe connector, the fifth light started blinking (I thought it was charging) and then it went back to all of them blinking indicating no battery detected. The computer also automatically turned on when I connected the MagSafe.
I have tired multiple times to reset PRAM and SMC even after installing the new battery to no avail. I can use the machine with the MagSafe connected, but as soon as the cord is unplugged or bumped, it goes into the emergency sleep mode.
Any thoughts on what might be ailing this not yet two year old machine? My first Mac lasted 7 years before any logic board fail so I hope that is not it. Anything I should try that I haven't yet? Any ideas on what this might cost me through Apple?
Thanks!

Why don't you look through this to insure you did everything correctly:
http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Early+2011+Ba ttery+Replacement/5116/1
Also, where did you get this battery?

Router Not Detected (Desperate Help Needed)

Similar Messages

Maybe you are looking for