RSA2/Cost Element Hierarchy (0COSTELMNT_0102_HIER)/remove 0CO_AREAP Prefix

Hi, gurus.
We are using 0COSTELMNT_0102_HIER delivered infosource. This datasource is extracting from our source system the cost element hierarchy. When loading into BW, every element is getting a controlling area Prefix (cost element characteristics, hierarchy nodes and hierarchy name). This is the standard behaviour.
Our requirement is to remove Controlling Area prefix from every hierarchy node and from hierarchy name, but not from characteristic elements.
eg......0CO_AREA........0COSTELMNT............0HIERNAME
.........M650..................RU_SIGMA................M650RU_SIGMA
.........M660..................RU_SIGMA................M660RU_SIGMA
And we want to get the hierarchy name without the controlling area, so:
....................................................................0HIERNAME
....................................................................RU_SIGMA
We can´t upload the hierarchy from a flat file cause we want to load and refresh it daily from the source system.
We've asked in Marketplace about the missing "change" option in RSA2 transaction, cause we see 2 options to do this:
1) Create a customer datasource for 0COSTELMNT hierarchy with RSA2 and use 2 custom function modules for extraction and hierarchy catalogs.
2) Modify 0COSTELMNT_0102_HIER and call 2 new custom function modules for catalog and data extraction (GSBH_HIERARCHY_TRANSFER_SETS, GSBH_HIERARCHY_CATALOG_SETS)
In any case, we would need access to RSA2 with create/modify authorization.
They answered that RSA2 is for display only. Here is their answer:
"RSA2 is a display only transaction. This transaction is not released for changes in customer systems. The reason is that there would be risks due to incorrect modifications."
I've also tryed BW07 transaction, but it is just for sets created with GS01 transaction (hierarchy class 0000), and I can´t create a custom datasource for Cost Element from this point.
If is there another way to supress controlling area prefix??
Our Development team don´t want the idea to modify GSBH_HIERARCHY_TRANSFER_SETS, GSBH_HIERARCHY_CATALOG_SETS function modules without an OSS note that says so.
Thanks in advance, Leticia
I'm having just the same problem mentioned in this thread /community

I have created a ABAP program to download the costelementgroup from SAP R/3 into a flatfile. 
Hope this helps.
&---- 
*& Report Z_EXTRACT_COSTELMNTGRP_HIER 
*& 
&---- 
*& 
*& 
&---- 
 
REPORT Z_EXTRACT_COSTELMNTGRP_HIER. 
 
************************************************************************ 
TABLES 
************************************************************************ 
 
TABLES: SETLEAF, 
 CSKU, 
 CSKT. 
 
************************************************************************ 
TYPES 
************************************************************************ 
 
TYPES: BEGIN OF T_FL_SETLEAF, 
 SETNAME TYPE SETLEAF-SETNAME, 
 LINEID TYPE SETLEAF-LINEID, 
 VALOPTION TYPE SETLEAF-VALOPTION, 
 VALFROM TYPE SETLEAF-VALFROM, 
 VALTO TYPE SETLEAF-VALTO, 
 LTEXT TYPE CSKU-LTEXT, 
 END OF T_FL_SETLEAF. 
 
TYPES: BEGIN OF T_FL_CSKU, 
 KSTAR TYPE CSKU-KSTAR, 
 LTEXT TYPE CSKT-LTEXT, 
 END OF T_FL_CSKU. 
 
TYPES: BEGIN OF T_FL_CSKB, 
 KOKRS TYPE CSKB-KOKRS, 
 KSTAR TYPE CSKB-KSTAR, 
 DATBI TYPE CSKT-DATBI, 
 END OF T_FL_CSKB. 
 
TYPES: BEGIN OF T_FL_HIER, 
 NID(8) TYPE N, 
 IOBJ(30), 
 NNAME(32), 
 PID(8) TYPE N, 
 HID TYPE I, 
 VALC TYPE I, 
 DESC(60), 
 END OF T_FL_HIER. 
 
TYPES: BEGIN OF T_FL_MKHIER, 
 HID TYPE I, 
 PID(8) TYPE N, 
 END OF T_FL_MKHIER. 
 
TYPES: BEGIN OF T_FL_FINAL, 
 OUT(500), 
 END OF T_FL_FINAL. 
 
************************************************************************ 
WORKAREAS 
************************************************************************ 
 
DATA: VFL_CSKU TYPE T_FL_CSKU, 
 VFL_CSKB TYPE T_FL_CSKB, 
 VFL_SETLEAF TYPE T_FL_SETLEAF, 
 VFL_HIER TYPE T_FL_HIER, 
 VFL_HIER1 TYPE T_FL_HIER, 
 VFL_MKHIER TYPE T_FL_MKHIER, 
 VFL_FINAL TYPE T_FL_FINAL, 
 VFL_SETHIER TYPE SETHIER_CO. 
 
DATA: V_SETHEADER TYPE SETHEADER. 
 
************************************************************************ 
INTERNAL TABLES 
************************************************************************ 
 
DATA: VIT_CSKU TYPE STANDARD TABLE OF T_FL_CSKU, 
 VIT_CSKB TYPE STANDARD TABLE OF T_FL_CSKB, 
 VIT_SETLEAF TYPE STANDARD TABLE OF T_FL_SETLEAF, 
 VIT_SETLEAF1 TYPE STANDARD TABLE OF T_FL_SETLEAF, 
 VIT_HIER TYPE STANDARD TABLE OF T_FL_HIER, 
 VIT_MKHIER TYPE STANDARD TABLE OF T_FL_MKHIER, 
 VIT_FINAL TYPE STANDARD TABLE OF T_FL_FINAL, 
 VIT_SETHIER TYPE SETHIER_CO OCCURS 0 WITH HEADER LINE, 
 VIT_SETVAL TYPE SETVAL_CO OCCURS 0 WITH HEADER LINE. 
 
************************************************************************ 
VARIABLES 
************************************************************************ 
 
DATA: NID(8) TYPE N, 
 PID(8) TYPE N, 
 CSTEL(14) TYPE N, 
 SETCLS(4) TYPE C, 
 IOBJ(10) TYPE C, 
 HID TYPE I, 
 NHID(8) TYPE N, 
 NVALC(8) TYPE N, 
 OUT(500), 
 L_FLAG(2) TYPE N, 
 L_LINK(1), 
 L_COAREA LIKE BAPICO_GROUP-CO_AREA, 
 RETURN LIKE BAPIRET2. 
 
************************************************************************ 
SELECTION SCREEN INPUTS 
************************************************************************ 
 
SELECTION-SCREEN BEGIN OF BLOCK SS01 WITH FRAME TITLE TEXT-002. 
PARAMETERS: P_SUBCLS(4) OBLIGATORY, "Org. eenheid bepalen 
 P_SETNM(15) OBLIGATORY. "Kostensoortgroep bepalen 
SELECTION-SCREEN END OF BLOCK SS01. 
 
SETCLS = '0102'. "Setklasse voor kostensoortgroep 
IOBJ = '0COSTELMNT'. "InfoObjectnaam voor kostensoort 
 
SELECT SETNAME LINEID VALOPTION VALFROM VALTO INTO TABLE VIT_SETLEAF 
 FROM SETLEAF 
 WHERE SUBCLASS = P_SUBCLS 
 AND SETCLASS = SETCLS. 
 
SELECT KSTAR LTEXT INTO TABLE VIT_CSKU 
 FROM CSKU 
 WHERE KTOPL = P_SUBCLS 
 AND SPRAS = 'NL'. 
 
LOOP AT VIT_SETLEAF INTO VFL_SETLEAF. 
 
IF VFL_SETLEAF-VALOPTION = 'EQ'. 
 
 READ TABLE VIT_CSKU INTO VFL_CSKU WITH KEY 
 KSTAR = VFL_SETLEAF-VALFROM BINARY SEARCH. 
 
 IF SY-SUBRC = 0. 
 
 VFL_SETLEAF-LTEXT = VFL_CSKU-LTEXT. 
 
 IF VFL_SETLEAF-LTEXT IS INITIAL. 
 
 SELECT SINGLE KTEXT FROM CSKU INTO VFL_SETLEAF-LTEXT 
 WHERE SPRAS = 'N' 
 AND KTOPL = P_SUBCLS 
 AND KSTAR = VFL_SETLEAF-VALFROM. 
 
 ENDIF. 
 
 APPEND VFL_SETLEAF TO VIT_SETLEAF1. 
 
 ENDIF. 
 
 CLEAR VFL_CSKU. 
 
ELSEIF VFL_SETLEAF-VALOPTION = 'BT'. 
 
 LOOP AT VIT_CSKU INTO VFL_CSKU 
 WHERE KSTAR GE VFL_SETLEAF-VALFROM 
 AND KSTAR LE VFL_SETLEAF-VALTO. 
 
 VFL_SETLEAF-VALFROM = VFL_CSKU-KSTAR. 
 VFL_SETLEAF-VALTO = VFL_CSKU-KSTAR. 
 VFL_SETLEAF-LTEXT = VFL_CSKU-LTEXT. 
 
 IF VFL_SETLEAF-LTEXT IS INITIAL. 
 
 SELECT SINGLE KTEXT FROM CSKU INTO VFL_SETLEAF-LTEXT 
 WHERE SPRAS = 'N' 
 AND KTOPL = P_SUBCLS 
 AND KSTAR = VFL_SETLEAF-VALFROM. 
 
 ENDIF. 
 
 APPEND VFL_SETLEAF TO VIT_SETLEAF1. 
 
 CLEAR VFL_CSKU. 
 
 ENDLOOP. 
 
ENDIF. 
 
CLEAR VFL_SETLEAF. 
 
ENDLOOP. 
 
CLEAR VIT_SETLEAF[]. 
 
SORT VIT_SETLEAF1 BY SETNAME VALFROM. 
 
CALL FUNCTION 'K_GROUP_REMOTE_READ' 
EXPORTING 
 setclass = SETCLS 
 co_area = L_COAREA 
 chrt_accts = P_SUBCLS 
 groupname = P_SETNM 
IMPORTING 
 return = RETURN 
TABLES 
 et_sethier = VIT_SETHIER 
 et_setval = VIT_SETVAL. 
 
NID = 00000001. 
PID = 00000000. 
 
LOOP AT VIT_SETHIER INTO VFL_SETHIER. 
 
IF NID EQ 00000001. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME. 
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 VFL_MKHIER-HID = HID. 
 VFL_MKHIER-PID = PID. 
 
 APPEND VFL_MKHIER TO VIT_MKHIER. 
 APPEND VFL_HIER TO VIT_HIER. 
 
 NID = NID + 1. 
 
 CLEAR: VFL_HIER, VFL_MKHIER. 
 
ELSE. 
 
 IF HID EQ VFL_SETHIER-HIERLEVEL. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME. 
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 NID = NID + 1. 
 
 APPEND VFL_HIER TO VIT_HIER. 
 
 CLEAR: VFL_HIER. 
 
 ELSEIF HID LT VFL_SETHIER-HIERLEVEL. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 PID = NID - 1. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME .
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 READ TABLE VIT_MKHIER INTO VFL_MKHIER 
 WITH KEY HID = VFL_SETHIER-HIERLEVEL BINARY SEARCH. 
 
 IF SY-SUBRC = 0. 
 
 VFL_MKHIER-PID = PID. 
 MODIFY TABLE VIT_MKHIER FROM VFL_MKHIER. 
 
 ELSE. 
 
 VFL_MKHIER-HID = HID. 
 VFL_MKHIER-PID = PID. 
 APPEND VFL_MKHIER TO VIT_MKHIER. 
 
 ENDIF. 
 
 NID = NID + 1. 
 
 APPEND VFL_HIER TO VIT_HIER. 
 
 CLEAR: VFL_HIER, VFL_MKHIER. 
 
 ELSE. 
 
 HID = VFL_SETHIER-HIERLEVEL. 
 
 READ TABLE VIT_MKHIER INTO VFL_MKHIER 
 WITH KEY HID = VFL_SETHIER-HIERLEVEL BINARY SEARCH. 
 
 PID = VFL_MKHIER-PID. 
 
 VFL_HIER-NID = NID. 
 VFL_HIER-PID = PID. 
 VFL_HIER-HID = HID. 
 VFL_HIER-IOBJ = '0HIER_NODE'. 
 VFL_HIER-NNAME = VFL_SETHIER-GROUPNAME. 
 VFL_HIER-DESC = VFL_SETHIER-DESCRIPT. 
 VFL_HIER-VALC = VFL_SETHIER-VALCOUNT. 
 
 NID = NID + 1. 
 
 APPEND VFL_HIER TO VIT_HIER. 
 
 CLEAR: VFL_HIER. 
 
 ENDIF. 
 
ENDIF. 
 
ENDLOOP. 
 
LOOP AT VIT_HIER INTO VFL_HIER WHERE VALC NE 0. 
 
LOOP AT VIT_SETLEAF1 INTO VFL_SETLEAF WHERE SETNAME EQ VFL_HIER-NNAME. 
 
 VFL_HIER1-PID = VFL_HIER-NID. 
 VFL_HIER1-HID = VFL_HIER-HID. 
 VFL_HIER1-IOBJ = IOBJ. 
 VFL_HIER1-DESC = VFL_SETLEAF-LTEXT. 
 
 SELECT KOKRS KSTAR DATBI INTO TABLE VIT_CSKB 
 FROM CSKB 
 WHERE KSTAR EQ VFL_SETLEAF-VALFROM. 
 
 LOOP AT VIT_CSKB INTO VFL_CSKB WHERE DATBI GE SY-DATUM. 
 
 VFL_HIER1-NID = NID. 
 
 CONCATENATE VFL_CSKB-KOKRS VFL_SETLEAF-VALFROM INTO CSTEL. 
 
 VFL_HIER1-NNAME = CSTEL. 
 NID = NID + 1. 
 
 APPEND VFL_HIER1 TO VIT_HIER. 
 
 CLEAR: VFL_CSKB. 
 
 ENDLOOP. 
 
 CLEAR: VFL_SETLEAF, VFL_HIER1. 
 
ENDLOOP. 
 
CLEAR VIT_SETLEAF[]. 
 
ENDLOOP. 
 
 
LOOP AT VIT_HIER INTO VFL_HIER. 
 
NHID = VFL_HIER-HID. 
NVALC = VFL_HIER-VALC. 
 
CONCATENATE VFL_HIER-NID ';' VFL_HIER-IOBJ ';' '"' VFL_HIER-NNAME '"' 
 ';' ';' VFL_HIER-PID ';' ';' ';' 'N' ';' 
 '"' VFL_HIER-DESC '"' ';' '"' VFL_HIER-DESC '"' ';' 
 '"' VFL_HIER-DESC '"' INTO OUT. 
 
VFL_FINAL-OUT = OUT. 
APPEND VFL_FINAL TO VIT_FINAL. 
CLEAR VFL_FINAL. 
 
ENDLOOP. 
 
CALL FUNCTION 'GUI_DOWNLOAD' 
EXPORTING 
filename = 'hierarchy.csv' 
TABLES 
data_tab = VIT_FINAL 
EXCEPTIONS 
OTHERS = 1. 
 
Edited by: Bjorn Houben on Dec 28, 2009 2:07 PM
Edited by: Bjorn Houben on Dec 28, 2009 2:16 PM
Edited by: Bjorn Houben on Dec 28, 2009 2:16 PM

Similar Messages

BW: Cost Element Hierarchy - from R/3 plus additional node in BW

Hi all,
We have cost element hierarchy (say ZP14PL) which we schedule to update periodically from R/3 into BW . However we would like to add an additional sub-node under this same hierachy via RSH1. As this subnode is only for BW use, this is not maintained in the hierarchy ZP14PL in R/3. With the 'full update' or 'update Subtree' option in the infopackage the hierachy ZP14PL will be deleted and replaced with the latest changes thus removing the additional node which we created for BW only.
Any suggestion as to how we could have the latest hierarchy updated from R/3 without deleting the additional subnode that we added in the same hierachy in BW?
Appreciate all expert advice.
Thanks and best regards,
VC

An easy way would be to include this link into the file using a start routine....
you should know the child node and parent nodes for the same and since the location of the same is going to be constant - you could add it to your start routine....
Or have a time dependent hierarchy but that would mess up your reporting...
Also this is not the correct forum to post BI relevant questions - suggest you post the same in the BI forums for more relevant answers....
Arun
Message was edited by:
Arun Varadarajan
[message moved to BI]

Cost Center and Cost Element Hierarchy and Actual Cost Center

In Bex - Right now I am displaying Cost Center and Cost Element hierarchy with 12 months of data. I want to display the actual Cost center number next to cost element hierarchy - Can I display in Bex?
Tried to with Structure creating formula variable for Cost Center using replacement path - didn't work. Can you please suggest me how i can achieve this?
The format should be
CostCenter H1 CostElement H1 CostCenter Jan Feb ...
Thanks in advance and appreciate for any help...

Let me explain it clearly and hope it is clear now...
Designed the report as like this - Cost Center Hierarchy by Cost Element Hierarchy for 12 months of data. But Business agian search in R/3 for actual cost center numbers based on above two hierarchy nodes.
I am trying to achieve this Bex instead of going back to R/3 - so that they can understand how the dollar amount is summed up on which major cost centers.
If I remove the hierarchy on Cost Center - it will display all the cost centers. They want to see the Cost center numbers based on CC and CE hierarchy node so that you are displaying only those cost centers. That's the reason I am trying to design the report with CC Hier, CE hier, Cost Center number and 12 months of data.
In my data model - have only one Cost Center, if i can create another ZCOSTCENTER same as 0COSTCENTER - May be I can achieve this. still looking for options with out changing the design.

New cost element hierarchy - how to extract

Hello,
User created new cost element hierarchy/cost element groups (KAH3).
I dont see this hierarchy in the list of available hiararchies of data source 0COSTELMNT_0102_HIER.
Shall it appear in the list automatically or I need to do custom extraction?
Thanks

Hello,
The problem is probably caused by the fact that only the highest node of the hierarchy is displayed as available for the
0COSTELMNT_0102_HIER datasource. This means that the cost element group which is displayed is not used in any other group. That is probably the reason why some of your groups are displayed as available and some of them not. You can check it in the transaction KAH3 in your OLTP system.
Select your cost element group and press the Where used button. On the next dialog box select just 'Groups' and choose ENTER. Then the groups are displayed that contain the respective group. The highest level group should be available also in BW system.
When you extract this group then you will see your group as a subnote. Please see the information SAP note 316976 on available hierarchies for CO InfoObjects incomplete.
Best Regards,
Des

Cost Element Hierarchy extraction error

I am trying to extract cost element hierarchy from the ECC using standard extractor 0COSTELMNT_0102_HIER. It says 26 records sent and 0 received in the monitor and see the following error when I click error message button. I would appreciate if someone can help me to resolve this problem.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
No status record was passed to ALE by the applicat
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Business Information Warehouse . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.

My problem got solved.
I went to details tab in the monitor. Look for the IDoc error, select and right click and choose option that says something like 'manual update/correct' on the IDoc.
Rerun your extraction and it should work.
Ram.

Cost element hierarchy stored in which table..

Hi Experts,
could you please tell me which tables are storing the cost element hierarchy, which is displayed
in KAS3 hierarchy...like cost center group hierarchy is stored in SETNODE , which is displayed in
KSH3 transaction.
Thanks.

Check these tables.
TKZU1
EVCE
TPIK2
TPIK3
TORB1

Loading cost element hierarchy

Hello experts,
I have got 2 questions
1) I am trying to load cost element hierarchy and there are about a 100 hierarchies which i need to load.. do i have to manually select all of these one by one to load or is there an easier way to do it ?? is there a way to select all the hierarchies which are showing up in the Infopackage selection.
2) Now lets say there is a change to one of the hierarchies which i have loaded...let's say a new account group has been added to a particular hierarchy which i have already loaded? Do i have to reload that particular hierarchy manually ?? Is there anyway to automate this process ?? like loading the hierarchies automatically from time to time so that whatever changes have been made to the hierarchy in R/3 are being taken into account when the query is run.
Thanks,
Bose

Hi,
As Eric has mentioned, there is no other ways but to create 1 infopackage for each of the hierarchy.
However, I think there must be some relationship with the 100 hierarchies you have. From what I know, in R3, if I have the following hierarchy
PnL
|- EBITDA
   |-- Net Cost
       |- Gross Operating Expenses
       |- Salary/Oncosts
   |-- Gross Margin
And when you create an infopackage in BW for this hierarchy of characteristic 0COSTELMNT, potentially you'll be seeing hierarchies for PnL, EBITDA, Net Cost, Gross Operating Expenses etc..... So sometimes it does not mean that you have to create 1 infopackage for each of these.... you simply have to select the PnL in this case.
Suggest that you check with you FI/CO colleague and see which is the main hierarchy...
Hope this helps.
Cheers,
Gimmo

Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down

Hello,
We have a BO report on Bex query, Not on universe, we have a Hierarchy for Cost Element Group, and we are expecting the Drill down functionality for that in BO report, but it does not.
Webi report on OLAP Bex query - Cost element Hierarchy not working Drill down
Any pointers how to do it please
Thanks
Krishna

Hi,
WebI reports on BEx source don't use same Drill feature as other sources, it's replaced by expland/collapse of hierarchy nodes (documented in WebI user guide in § "24.1 Drill defined"). This means you have to create query which selects all hierarchy sub-tree you plan on exploring later in report, otherwise if no data is available under a node there will be no '+/-' sign to visit this part of tree.
You could try first to select "All members" from hierarchy in QueryPanel and see if behavior in report suits your needs. Then you should restrict hierarchy member selection to what's really needed to avoid performance issues.
Regards,
Loic

Needed to create a new cost element hierarchy to come in line

needed to create a new cost element hierarchy to come in line with Victory reporting. I went into create new group and referenced NETEXPS2.RD so that I could then edit it.
I made all the changes required for the new hierarchy NETEXPS3.RD. Unfortunately some of the changes I made have changed NETEXPS2.RD.
Is this my fault for referencing? Is there any way of going back to the original NETEXPS2.RD version and fixing it?
Please suggest for the above.
Regards
Srinivas.

In addition to Krishna if you don't want to expose all the package to the trainee, then create a new role keeping everything same as default MODELING role (open it and have a look) but in "PACKAGE PRIVILEGES" add only those package that you want to expose to the end users.
Regards
Kumar

Query Cost Center and Cost Element Hierarchy

here is the problem.
We are trying to build a query that does the following.
Its a CCA query.
We have Costcenter in the Filter area with a Hierarchy assigned and a hierarchy node variable attached.
We run the report and its looks good and the user cannot drill down because nothing is in the "rows" area. Its perfect.
Now the user has said that within that Costcenter Hierarchy we only want to see a total number based on the CostElement Hierarachy assigned. Different CostElement Hierarchys are valid for different times of the budget.
I have created a Hierarchy variable and attached it to the CostElement.
Here is The issue ****
If I drop the Costelement in the "rows"area it prompts for the Hierarchy name , filters Costcenter properly and provides the extact number. Problem is the user can now drill down and that is not allowed becuase we are going to have 3 summary totals with a "grand total" at the bottom.
So if I put the CostElement in the Filter area it now does not filter the CostCenter and I get the wrong number.
Is there a way to prevent drill down or some how force the CostCenter to be filtered by CostElement also.
Thanks for any help
Richard

Hi Richard,
Not sure if this will help as I have not tried it out, but you can try by setting the display property of Cost Element to No Display, when it is in the Rows area. This can be done by Cost Element > Right Click > Display As > No Display.
Hope this helps...

Cost element hierarchy

I need to create the ECC account hierarchy table for which somebody mentioned that I need to use bapi_costelementgrp_getdetail. I am using Informatica for this. Any ideas?
thanks

Ajay,
Thanks for you suggestion. Unfortunately it wont work in my case. The problem I have is with Hierarchy node key value. The hierarchy key itself is in that format in R/3.
XXXXAAA
XXXXBBB
Since they are compounded, I can't seperate during the load. I am trying to change the display. Every one suggested to put the controlling area in the filter section and restrict it with one value and this should work.
I tried that, but it didn't work for me. I am not sure what I am missing. As I mentioned already I tried the option Abdul suggested.
Thanks
Sri
Message was edited by: Sri Vani

Bapi to delete cost element in KAH2

Hi all,
anyone knows which is the bapi/function module that deletes any cost element at any group? Like it is done in transaction KAH2?
Thanks in advance,
Carlos.

Thank you so much Ganga!
The first one is working fine althought the cost element is not removed from table SETLEAF and it is still appearing in KAH3, but now with the message ">>> No valid master record", but it's the same as standard does.
Thanks again!
Carlos.

Reporting issue-Cost Element

Hi:
We have a report which shows Cost element hierarchy. Each cost element is compunded with Controlling area. We have 4 controlling area with costelement being same across all of them. Our user want to see a report where they can get total for cost element across all controlling areas instead of displaying each cost element 4 times as it is compounded with conrolling area.
The current report is diplayed as shown below.
Salaries & Benefits      Amount
Cost element1/CA1       $100
Costelement 1/CA2       $200
Costelement1/CA3        $300
Costelement1/CA4        $400
User wants a report as shown below
Salaries & Benefits   Amount
Cost element1        $1000
Costelement2         $2000
Is there a way to do this?

HI,
Which are the characteristics that you are inserting in the line (in query designer) ?
Because of if you insert just "Cost Element" you will not have any issue about it.
Kind Regards
Please, assigned point if you believe that was a helpful answer

How to remove overlap of cost element in allocation structure?

hi experts,
on KSES the source has double entry of cost element. those cost elements were defined under cost element group. when i checked on the Source screen the entries under the cost element group there is no double entry but when checked on Extras > Overview List i can see two entries of the cost element. how can i remove on the double entry of cost element on the source of the allocation structure?
thanks!

Hi,
Go to KAH2 . enter cost element group.
Select the cost element to be deleted , then select arrow (upwars left , 3rd button from top left) , right click and then remove.
Regards,
Mrinal

Adding cost element to a particular hierarchy in RSH1 leads to shortdump.

Hi,
I'm facing some issue in production for TCode-RSH1.
Adding cost element to a particular hierarchy in RSH1 leads to shortdump. (Assign_Type_Illegal_Cast). This problem is causing for some hierarchies only.
Steps followed by us for adding cost element:-
1) RSH1-select hierarchy name.
2) In change mode, select a paticular node, click on cost element.
3) Select any of the cost element & click the green button (tick)
When we are following the above steps, it is leading to short dump and giving the following error message:-
Assign_Type_Illegal_Cast.
This issue is causing for some hierarchies & not for all.
Request to suggest the solution..
Regards,
SDN User.

Hi Venkat,
That particular hierarchy is not having multiple nodes. Only one node named Rate & efficiency. and the user needs to add cost element to that node. Now how come your ans match here in this case.
Now is that you are telling that one cost element which is selected is there for that node in some other hierarchy?But it is a different hierarchy , so if it is then it would be a problem?
Or else I have one more doubt....
Is that the user might be having some authorization problem for that particular hierarchy or the info object or cube where the hierarchy is? Because he is saying that he is having this problem for some few only not all hierarchies. So its understandable that RSH1 authorization to edit and create he has.

RSA2/Cost Element Hierarchy (0COSTELMNT_0102_HIER)/remove 0CO_AREAP Prefix

Similar Messages

Maybe you are looking for