RSUSR003 Security violation but all users are changed

Hi experts,
I ran RSUSR003 and get a security violation in syslog SM21 and also in my weekly Early Watch Report although all users seem to be changed correctly:
Results of RSUSR003:
000     SAPCPIC     @07\Qunlocked@     Exists; Password not trivial.
001     DDIC     @07\Qunlocked@     Exists; Password not trivial.
001     SAP*     @07\Qunlocked@     Exists; Password not trivial.
001     SAPCPIC     @07\Qunlocked@     Exists; Password not trivial.
066     DDIC          Does not exist.
066     EARLYWATCH     @07\Qunlocked@     Exists; Password not trivial.
066     SAP*     @07\Qunlocked@     Exists; Password not trivial.
066     SAPCPIC          Does not exist.
100     DDIC          Does not exist.
100     SAP*     @07\Qunlocked@     Exists; Password not trivial.
100     SAPCPIC          Does not exist.
200     DDIC          Does not exist.
200     SAP*     @07\Qunlocked@     Exists; Password not trivial.
200     SAPCPIC          Does not exist.
Is this report testing for some specific parameters or other stuff which can be responsible for the status "security violation"?
Thanks and best regards, Basti

Hi,
that message is created when you run that report. It should be related to the result of execution, It's fixed in note 1451760.
Cheers

Similar Messages

Can we change log_buffer parameter online e.g. when all users are working..

Hi,
Can we change log_buffer parameter online e.g. when all users are working.. ???
What is relation between redo buffer in sga and log_buffer parameter ?
SQL> show sga
Total System Global Area 3758096384 bytes
Fixed Size 1983152 bytes
Variable Size 553655632 bytes
Database Buffers 3187671040 bytes
Redo Buffers 14786560 bytes
SQL>
SQL> show parameter log_buffer
NAME TYPE VALUE
log_buffer integer 14338048
SQL>
SQL>
If the log_buffer parameter is 14 MB then why redo buffer is no as same size e.g.
14 MB
SSM

I am hoping your Oracle Consultant know what he's talking about.
According to Oracle Performance Guide,
http://download-west.oracle.com/docs/cd/B19306_01/server.102/b14211/memory.htm#sthref654
"On most systems, sizing the log buffer larger than 1M does not provide any performance benefit. Increasing the log buffer size does not have any negative implications on performance or recoverability. It merely uses extra memory.
The best method to determine if bigger redo buffer is needed is
SELECT NAME, VALUE
FROM V$SYSSTAT
WHERE NAME = 'redo buffer allocation retries';
The value of redo buffer allocation retries should be near zero over an interval. If this value increments consistently, then processes have had to wait for space in the redo log buffer. The wait can be caused by the log buffer being too small or by checkpointing. Increase the size of the redo log buffer, if necessary, by changing the value of the initialization parameter LOG_BUFFER. The value of this parameter is expressed in bytes. Alternatively, improve the checkpointing or archiving process.
Other than that, hight log file sync event indicate you need faster disk for your redo logfiles. However, please also post your commits per second and redo per second from your AWR report.
100M redo logs might be small for your environment.

Yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.

yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.i can see the pictures in settings>brightness>wallpapers but i couldnt able to see in photos application in ipad4

I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
It's my understanding that there will be no future updates to Tiger, only security fixes.

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

After upgraded 9.2 DB, all users are not able to login (Except Guest).

After completed the DB upgrade from 8.1.7.4 to 9.2.0, all users are not able to login the oraclemypage.home. This is except the Guest account.For example, I use the sysadmin account to login the oraclemypage.home. It shows "Your login is invalid. Please login again."
Moreover, I do the following query.
SQL> select fnd_web_sec.validate_login('SYSADMIN','SYSADMIN') from
dual;
FND_WEB_SEC.VALIDATE_LOGIN('SYSADMIN','SYSADMIN')
N
If I guery the Guest account, the result is "Y".
Also, all users can access via dev60cgi/f60cgi to open E-business 11.5.7 application. Are there any missing script / process I need to do?
Thanks,
Matthew

Hi Arun,
What message u get on the apache logs / jserv logs when u get the error ?
Since the log cumulate a giga byte, I clean up the log and test again. It seems no error message.Whats your platform?
HP-UX 11.11To which version (5 digit) u upgraded DB ?
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
I found a note 225074.1 that talks of a similar issue where users are ablt to login to forms but not php. this is for AIX. review the note.
I had checked this previously. Part of this document already tried which suggested by Oracle Support.what is the end_date for all of these users in fnd_user table ? if all users for some reason is end_dated , then fnd_web_sec will show 'N"
All users are normal. For those I tested without end_dated, I can access via f60cgi too.whats the session_cookie_domain set to in icx_parameters table? Set to NULL and try bouncing apache once.
This set to ".mycompany.com". You mean that I set the session_cookie_domain to NULL and restart Apache, right? Why I need to set it NULL?

I have pages setup for english but all templets are in spanish

Hello everyone
After trying to reset keyboard preferances and services I am not getting any solution.
I have pages setup for english but all templets are in spanish.
can anyone help to fix this problem?
Thanks
dsd

You mean this?
Sociis mauris in integer, a dolor netus non dui aliquet, sagittis felis sodales, dolor sociis mauris, vel eu libero cras. Interdum at. Eget habitasse elementum est, ipsum purus pede porttitor class, ut adipiscing, aliquet sed auctor, imperdiet arcu per diam dapibus libero duis. Enim eros in vel, volutpat nec pellentesque leo, temporibus scelerisque nec. Ac dolor ac adipiscing amet bibendum nullam, massa lacus molestie ut libero nec, diam et, pharetra sodales eget, feugiat ullamcorper id tempor eget id vitae. Mauris pretium eget aliquet, lectus tincidunt. Porttitor mollis imperdiet libero senectus pulvinar. Etiam molestie mauris ligula eget laoreet, vehicula eleifend. Repellat orci eget erat et, sem ***, ultricies sollicitudin amet eleifend dolor nullam erat, malesuada est leo ac. Varius natoque turpis elementum est.
A: It's Latin, not 'Spanish.'
B: What problem?
Click on this Placeholder text to select it (All of it will be selected on a single click).
Type.
On the first kaystroke, all of the placeholder text is deleted and the first typed character appears.
Carry on.
Images in the templates are media placeholders. Replace them with your images in a similar manner.
For more on placeholder text, see page 75 of the Pages '09 User Guide; for more on media placeholders, see page 137.
The guide may be downloaded via the Help menu in Pages '09.
Regards,
Barry

HT3702 I am being charge for itunes but all apps are free?

I am being charge for itunes but all apps are free? It is possible to get money back?

If you are referring to the temporary store holding charge as described on the page that you posting, which is 'charged' each time that you change the card details on your account, then it should disappear off the card within a few days or so - though it varies by bank, and with it now being the weekend it might an extra day or two. If they haven't disappeared within a week of them being made then you could contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Also some apps may be free to download but they then allow you to make in-app purchases to unlock extra features within them - you can turn off in-app purchases via Settings > General > Restrictions on your phone.

Force all users to change their Enterprise passwords with a batch operation

Hello,
Do you know if there is a way to force all users to change their Enterprise passwords with a batch operation in the SDK? Is there any implementation done?
Many thanks!
Bea

You can logon to Enterprise as Administrator in your SDK application. Query all users using following query:
select * from ci_systemobjects where si_kind='user'
then loop through the collection InfoObjects returned and cast east object to IUser.
Either call setPasswordToChangeAtNextLogon(true) so that the user logs on next time will be forced to change his\her password. Call commit on InfoObjects collection at the end to save the changes.
Otherwise you can call setNewPassword("new password") to reset password for that user.
Depending upon number of users you can do bath commit. You can use commit(infoObjects,true). The 2nd argument is true for batch commit.

HT4527 Shared, transfered, backed up, synced, but all apps are gone...?

Hi,
We have 1 iPad, 1 iPhone, and 3 iPods that need to be moved from old-pc to new-pc.. So I:
- read forums, faqs, etc.
- authorize new-pc
- set up sharing and copy everything from old-pc to new-pc
- transrfer purchases from iPad to new-pc
- do a back up of iPad to new-pc
- upgraded iPad on new-pc
- sync iPad to new-pc
Then, much to my dismay, I see that no apps are present. Music and movies are there, so are some personal settings, but no AppStore apps. "A-ha!", I thinks to myself..."I'll restore from backup!" After which iPad has reverted it's sync to old-pc.
So I curse for a bit and re-sync iPad to new-pc. But all apps are still gone, and the only way to get them back on iPad is to download them from iStore (or whatever the h*** it's called) but all personal app-info is gone.
Please help. How do I transfer iThing ownership from old-pc to new-pc without losing half of everything?
Thanks, oh so very much.
Splats.

How to Restore from a Backup > http://support.apple.com/kb/ht1766
What gets Backed Up
iTunes http://support.apple.com/kb/ht4946
iCloud http://support.apple.com/kb/PH2584
KacieKitKat wrote:
It also did not fix my WiFi issue.
Have you tried this...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

App Store shows 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

App Store shows that I have 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

I have the same issue with one App in the App Store. The app is installed and current. But the App Store says I have an update. I tried restarting. No help.

After deploy in server, integrated Security works for all users but only one user does not work for one user

hi
   i'd like to ask for help.here is a brief introduction.
      i publish a web project on a server(the name,"server-deploy"),(it connect with sql server datavvase with connection string of database "Trusted_Connection=Yes",with web config file <authentication
mode="Windows" />    <identity impersonate="true"/>
   there are some users whose Impersonae_clients_after_authentication are enabled. and most of them can connect to database via the deployed project .
but one user,he was told 'NT AUTHORITY\ANONYMOUS LOGON', and according to even viewer("security of "windows log") of "server-deploy",it shows "Audit failure"(the Task category is "credential validation")
and here is some information
[ Name] Microsoft-Windows-Security-Auditing
   EventID 4776
The computer attempted to validate the credentials for an account.
PackageName MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
TargetUserName (user)
Workstation (Workstation)
Status 0xc0000064
   while when other user do login ,there is no log whose Task category is "credential validation".
COULD ANY ONE CAN DO ME A FAVOR TO HELP ME?ANY HELP IS APPRECIAT. THANK U VERY MUCH IN ADVANCE :)
best regards
martin

and i made a small windows form application here
   private bool impersonateValidUser(String userName, String domain, String password)
            WindowsIdentity tempWindowsIdentity;
            IntPtr token = IntPtr.Zero;
            IntPtr tokenDuplicate = IntPtr.Zero;
            if (RevertToSelf())
                if (LogonUserA(userName, domain, password, LOGON32_LOGON_INTERACTIVE,
                    LOGON32_PROVIDER_DEFAULT, ref token) != 0)
                    if (DuplicateToken(token, 2, ref tokenDuplicate) != 0)
                        tempWindowsIdentity = new WindowsIdentity(tokenDuplicate);
                        impersonationContext = tempWindowsIdentity.Impersonate();
                        if (impersonationContext != null)
                            CloseHandle(token);
                            CloseHandle(tokenDuplicate);
                            return true;
            if (token != IntPtr.Zero)
                CloseHandle(token);
            if (tokenDuplicate != IntPtr.Zero)
                CloseHandle(tokenDuplicate);
            return false;
and here is the code of buttonclick
if (impersonateValidUser(user,psw,doman))
                if (!System.IO.Directory.Exists(this.textBox1.Text))
                    MessageBox.Show("not exist with imper");
                else
                    MessageBox.Show("exist with imper");
                undoImpersonation();
            else
                MessageBox.Show("fail login.");
   and i was told "exist with imper"(usually if Impersonae_clients_after_authentication is not enaled would told "not exist with imper" )

How to disable the annoying security warning for all users in Windows Server 2008 R2

Hi,
The employees from the administration complain all the time about the different types of security warning that they get when trying to run some applications which are used frequently.
Since the number of the users is too big it is unfeasible to go through all the users and disable the User Access Control at their account settings.
Is it possible to achieve this through given account policy settings. I want to perform the changes on the server so it applies to *all* (or maybe those of Administration department) users.
One useful information here can be the following: we use 2 different severs, the application which cause the errors are in the terminal server, and the users are in the main server. Where should I perform the changes?
Best,
D

Hiya,
It could sound like that one indeed. There are a few options to go for, however it should be fairly easy to find out :)
Create a test GPO and apply to a limited amount of users. GPUpdate and verify that the GPO has been applied using rsop.msc
Then open the application to test and see if it has the desired effect. You might need to change more than one setting, depending on the application and desired behavior.

Wrt54g only have 2 wireless put of 4 but all lights are on

I was having a connection problem the other day which was weird. So, I went to check on my wireless router and ALL 4 lights were lit. I unplugged it and rebooted and every thing went back to normal. Now it has happened again. Are people using my wireless connection?? Or is my box DYING? If I have my location set a home does that mean they can access my computer?? I have one thing hard wired and a wireless card in my laptop. I had set up a password with my router before, but maybe it got erased when I upgraded to a new laptop..?? I'm not sure if that could change it but I haven't deleted it my self. I'm not sure how to make sure that its there.. I found where it says WEP ..... and key 1. Also, I have SSID to something other then linksys. My network type is access point and network availability is All users (not sure what that means). How can I make sure I'm password protected?? ARGH! My head hurts! any info would be awesome!

So,all the four Ethernet light lit-up although only one computer is connected....Try to hard-reset the router for 60 seconds,Power Cycle the router and check the status of the light on the router.
If the light status on the router is OK then,open the router setup page by typing 192.168.1.1 and re-configure the router..If you get the same result after resetting the router then,try to upgrade the router's firmware..
You can download the firmware from www.linksys.com/downloads..On the linksys setup page,Click on Administration tab to upgrade the firmware..

Security settings for all users

I recently developed a document that requires digital signatures and have been testing it. The only downside is that when a user opens the document, Adobe prompts for the installation of new security settings, and it installs it for that user only. I need to add a registry key to the new security settings, but it is only available to be added to the current user hive. Does anyone know how to install the new settings for all users?
Here is the registry key I need to add.
[HKEY_CURRENT_USER\Software\Adobe\Adobe Acrobat\9.0\Security\cPubSec]
"bSelfSignCertGen"=dword:00000000
Im using Adobe Reader 9.3 and Win XP.
Any help would be terrific!
Thanks.

Hi,
There are really two separate issues. First, is Adobe pushing updates to the Acrobat Address Book (i.e. adding certificates as trust anchors) and the second issue is how you can push your own update to disable the creation of self-signed digital IDs. Although the two issues share an underlying mechanism, they are separate and you cannot leverage one for the other.
First issue first. Adobe has entered into partnership with certain Certificate Authorities and has created a mechanism to add their certificates to the Acrobat Address Book (aka Manage Trusted Identities) using http to send a copy of the Security Settings file that contains only digital IDs. There are two ways to trigger the download process. One is to go into the Preferences, select Trust Manager, and click the Update Now button in the Automatic Updates group box. The other method is to load the DigSig plug-in (beginning with Acrobat 9, plug-ins no longer load a launch in order to speed up the launch process). As I'm sure you have deduced, opening a file with a signature field cause the DigSig plug-in to load which in turn triggers the automatic download. The reason we have limited the automatic download to DigSig being loaded is because the vast majority of people viewing PDFs are not using the digital signature functionality (much to my personal chagrin because the more people use digital signatures, the better my job security ) and we didn't want to bother them with an update they would never need. People already complain that there are too many updates, and we are trying to limit the irritability factor. To close the loop on this function, once the download process has been triggered the Acrobat check two more things before it does the update, 1) has it been a month since I checked and, 2) if it has been a month is there a new file to download. This way we are not pestering people with unneeded updates, or if they do need the update, at least not too often. And finally, Address Book management has to be on a per user basis. A certificate that you may elect to trust could be a certificate that the next person want to specifically keep untrusted. The Windows Certificate Store, Mac Keychain and Firefox Certificate Manager all work on a per user basis.
That brings us to what you would like to do. The good news is you can use the Export Security Settings featrue to create a distributable file that will set the preference. The real question is how will you distribute the file, but before we get to that, here is how to create the file.
With Acrobat closed, set the registry setting you noted in the message above
Launch Acrobat
Select the Advanced > Security > Export Security Settings menu item
Click the Deselect All button on the Export Security Settings dialog
Select the Signing Preferences Settings checkbox
Click the OK button on the Export Security Settings dialog
Select Signature Creation Settings and note "Allow creation of self-signed Digital IDs" is set to No
Click the Export button on the toolbar
Follow the on screen dialogs. You don't have to encrypt the file, but you must sign it with a certifying signature
At this point you have the file available for distribution. You could e-mail it to your intended recipients with import instructions, or you could post if for download, or you could set the Preference the to automatically push the file from a server. To check this feature out select the Edit > Preferences menu item and then select Security from the Categories list box. You would need to select the Load security settings from a server checkbox and then set up the URL. As an aside, you can also export these settings by selecting the Automatic Update Settings checkbox on the Export Security Settings dialog noted in the bullet points above. You have a chicken and egg problem in that you have to get the users to first manually import the file in order to set up the automatic import. That I can't help you with, you're just going to have to decide what works best for you.
Good luck,
Steve

Install security updates for all users

I am using the a form with digital signatures fields, and when a user logs onto a pc and opens the form Adobe asks if you would like to install new security settings. I tell my user to click yes, but there are multiple users on multiple PCs that will be using this form. Is there a way to install this same setting for all users? I am using Adobe reader 9.3, and the form was deisgned with Designer. Any help would be very appreciated.
Thanks!

It would seem like that article ''should'' solve the problem, but it doesn't seem to have had any effect. I extracted the contents of the .xpi file into the browsers\extensions folder using the extension ID, yet that doesn't seem to have done anything. I ran firefox after copying the uncompressed files with an administrator account with no luck. Any thoughts?

RSUSR003 Security violation but all users are changed

Similar Messages

Maybe you are looking for