Rules for Mailboxes
Can different accounts in mail.app have rules that are specific to that account? It seems that when I create a rule it applies globally to all accounts.
FYI - this is the Using iPhone > Mail, Contacts and Calendar discussions area.
If your OS X detail provided is accurate, it would be better to post your question in the Mac OS X v10.5 Leopard > Mail and Address Book discussions area.
http://discussions.apple.com/forum.jspa?forumID=1223
Similar Messages
-
Creating rules for other mailboxes
Hi there,
I couldn't seem to find this question anywhere so I'll just post it. Is there a way to create a rule for IMAP mailboxes? Here is my situation: I have two gmail IMAP accounts in Mail in addition to my .Mac IMAP account. Now sometimes I can't always get to my computer to check for mail so I've been using the webmail on apple.com. However, to make things more convenient for me I've made gmail forward all my messages to [email protected] I want my gmail accounts on my Mail app because then I can send messages with my gmail account instead of my .mac account. I just want to be able to use the .mac account as a kind of grouping station. I also want to use the push mail function when MobileMe becomes available.
My question is, I know that on Mail I'm going to get duplicate messages in my Gmail IMAP accounts, because they are also being forwarded to [email protected], but is there any way to create a rule so that I won't see the "unread message count" on my gmail mailboxes? Or is there a way to make Mail not check for new messages in my gmail accounts? Or something to that effect?
Thank you all so much,
R.Does anyone have an answer?
thank you -
How to use Flagged mailbox in rules for smart mailbox?
Since I installted ML I have a new mailbox called Flagged. In Lion I had a smart mailbox called Flagged which did the same.
I used this smart mailbox in Lion in rules of other smart mailboxes. The new mailbox Flagged in ML however can't be selected in a rule for a smart mailbox. It is in fact the only one I can't select.
Am I the only one facing this problem? If so, is there a solution for it?The only use I've found so far for the Flagged messages is to be able to set different colours for different things and then use the preset mailbox to isolate and concentrate on them:
And, as I'm using iCloud, I also get to see them on my laptop. -
Disable Inbox Rules for Disable Users
I have found that when our helpdesk disables an AD user account (terminated employee) that has an Outlook inbox rule to forward the email to an email address outside the organization, emails sent to the former employee are still forwarded to that outside
email address. I would like to run a script each day that queries AD for all disabled accounts, removes any forwarding SMTP adresses, then removes all mailbox inbox rules. I have been trying to use get-aduser against a DC and export the list of
disabled users, this works fine. I then take that csv, import it and use -foreach-object to set the forwarding smtp address to null. I would then like to use the same csv file to run the -removeinbox rule command against the list. I am having
a hard time time combining the commands I need into a PS script that works against both AD and Exchange.
Anyone have some powershell kung fu to assist me? Thank you!
~EricHi Eric,
According to your description, I understand that you want a script to get a list of disabled AD user, then removes any forwarding SMTP addresses, then removes all mailbox inbox rules.
We can run following command to get a list of disabled AD user in PowerShell:
Get-ADUser -Filter 'Enabled -eq "false"' | select name,userprincipalname
More details about “How Can I Get a List of All the Disabled User Accounts in Active Directory? “, for your reference:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/05/12/how-can-i-get-a-list-of-all-the-disabled-user-accounts-in-active-directory.aspx
Also, run below command to disable forwarding SMTP address and inbox rule:
Get-Mailbox -Identity xxxx | Set-Mailbox -DeliverToMailboxAndForward $false
Get-InboxRule –Mailbox xxxx | remove-InboxRule
However, we recommend use this disable AD user to disable mailbox.
By the way, this question will related to the script of Exchange server, please contact relevant team so that you can get more professional suggestions. For your convenience:
http://technet.microsoft.com/en-us/scriptcenter/dd742246.aspx
Best Regards,
Allen Wang -
Message rule for sent messages
Hi,
I have successfully converted and repaired all my Outlook Express mail to Apple Mail 3.5 with Emailchemy. I have aprox 450 folders and 5000 mails. I have used more than 200 rules to organize my incoming messages but I cannot find the way to store "sent messages" in the right folder. I don´t want to store my replies in sent messages. I need my reply inside the folder where the message rule previously stored my incoming message. is it possible?
Warmest regards,There are several possibilities.
The simplest of course is not to bother. When you reply to a message, Mail puts a link (a little anti-clockwise curved arrow) in the status column of the original message, and clicking on that brings up the reply.
You could set up Smart mailboxes. This would leave the replies in the Sent mailbox, but also make them visible in the appropriate Smart box. The rules for the various Smart boxes would have to be designed to pick up both original messages and replies.
If you really must get the replies into the same folder as the originals, you will need some sort of Applescript. You could for example have a Mail rule, fired by any incoming message, which runs an script to look at all messages in the Sent box, and identifies the box to move each to. How is your scripting?
Another script-based possibility is to have a script to generate the replies. Since it would know which box it was working from, it would know which box to put the reply in, and it would require less maintenance (as your requirements change) than the previous.
Perhaps the best solution for you, requiring the least effort, would be to use the Mail option to automatically CC (or BCC) yourself. The resulting copy is an incoming message - so your 200 rules should pick it up and move it to the appropriate mail box.
AK -
[SOLVED] how to use diffrent iptables rules for different ppp account?
x86 plantform run arch linux system , have two network interface etn1 eth0 .eth1 connect to internet. eth0 connect to other terminals through switch. want use different iptables rules for different pppoe account .also want to know how to forbidden more than one terminals established pppoe link use same account at the same time .
Last edited by linuxsir (2013-09-26 06:48:01)(You establish PPPoE sessions over the local network to the Arch machine? Which then routes the traffic?)
first question ,yes that is exactly what i am done. second question i also have a small scripts on windows pc to solve routes traffic problem
route -p delete 0.0.0.0
route -p add 192.168.9.0 mask 255.255.255.0 192.168.9.1
route -p add 0.0.0.0 mask 0.0.0.0 192.168.22.0
but after a while i found scripts is not necessary because windows always attempt to use PPPoE sessions as default internet connection local connection is also ok
and use -i pppX in my iptables rules dose not solve my problem , because same account start PPPoE session could be marked as ppp0 or ppp1. it is hard to identified which account start session. -
Data not coming from DOE to Mobile After defining Rule for device attribute
Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
AbhishekHi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w -
Leave Quota generation with diifferent rules for different countries
Hi,
I have the following requirement need help in achieving this.
Employers must grant 10 days paid leave to employees that worked for six consecutive months from the time of hiring and who worked on not less than 80 per cent of all schedule work days. This paid leave may be taken consecutively or separately. Where an employee's application to take paid leave will hinder the normal business operations, the employer may require the employee to take such paid leave at a different time.
The number of days of paid leave available to employees increases in proportion to employees' length of service as set forth in the below table.
Years of Service 0.5 1.5 2.5 3.5 4.5 5.5 6.5+
Paid Holidays 10 11 12 14 16 18 20
The right to annual paid leave expires after two years. In other words, annual paid leave left over from one year may be carried over and taken the next year only. For example, if an employee is awarded 10 days paid leave after their first 6 months of employment; those paid holidays will become invalid after 2.5 years of employment. Use them or lose them.
Simply put, holidays from one year can be carried over to the next year, but not to the third year. So, if you don't take your leave from one particular year within 12 months of that year ending, you will lose that first year's allowance.
Employee can take leave encashment of holiday leave only when leaving their employer. It is not legal for companies to buy up the holiday leave of those still working for the firm.
In my organization one PSG grouping has been used for all countries, it wont be possible to change the grouping now. In such a case how can we provide different rule for different country without customizing the Leave module.
Do we have to use any PCR for this, if yes which??
Regards,
Jailakshmi
Edited by: Jailakshmi on Aug 3, 2011 7:16 AMHi,
Use QUOMO Feature to give different entitilement to employees.
Leave entitlement as per seniority can be configured in base entitlement.
Keep validity and deduction period for 2 years by using :Relative postion" option in validity and deduction period table.
Rgds,
Lata
Rgds, -
Problem with nat / access rule for webserver in inside network asa 5505 7.2
Hello,
i have trouble setting up nat and access rule for webserver located in inside network.
I have asa 5505 version 7.2 and it has to active interfaces, inside 192.168.123.0 and outside x.x.x.213
Webserver has ip 192.168.123.11 and it needs to be accessed from outside, ip x.x.x.213.
I have created an static nat rule with pat (as an appendix) and access rules from outside network to inside interface ip 192.168.123.11 (tcp 80) but no luck.
What am i doing wrong?Command:
packet-tracer input outside tcp 188.x.x.213 www 192.168.123.11 www detailed
Phase: 1
Type: FLOW-LOOKUP
Subtype:
Result: ALLOW
Config:
Additional Information:
Found no matching flow, creating a new flow
Phase: 2
Type: ROUTE-LOOKUP
Subtype: input
Result: ALLOW
Config:
Additional Information:
in 192.168.123.0 255.255.255.0 inside
Phase: 3
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0x35418d8, priority=500, domain=permit, deny=true
hits=1, user_data=0x6, cs_id=0x0, reverse, flags=0x0, protocol=0
src ip=188.x.x.213, mask=255.255.255.255, port=0
dst ip=0.0.0.0, mask=0.0.0.0, port=0
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: inside
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule -
Report on settlement profile/rule for the Process Orders ?
Is there any report which will display settlement profile for process order or settlement rule for process order.
Hi,
Did you try this one: KOSRLIST_OR - Settlement Rules?
Regards,
Eli -
Any report to check vacation rule for users?
any report to check vacation rule for users?
Hello Anand,
there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
Regards, Andreas -
Error when activating update rules for R/3 training and event management
hi all,
when iam trying to activate update rules for training and event management cube it is giving fallowing error."IC=0PE_C01 IS=0HR_PE_1 error when checking the update rules
Message no. RSAU461".
please guide me how to solve this issue.
thanks & regards
Vamshi D KrishnaHi Vamsi,
Have you followed the following document to implement HR ?
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23 -
How can I activate the transfer rules for the ODS updating a data target.
We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to <u><b>'update the data target'</b></u> I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then <u><b>'activate' the transfer rules</b></u>.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
<b>Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.</b>
Thanks for your assistance.
DennyHi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm -
Apple Mail 8.2: How to make a rule for a domain
I get many unwanted emails from AOL.com and cannot figure out a way to create a rule that applies to the entire domain. <*aol.com> does not work and the 'sender' name changes with each one.
How can I create a rule for the entire aol.com domain?DenaliDad wrote:
Correct. That doesn't work and neither does *@aol.com
It worked when I tested it on my mac (using another domain). The * is useless. "contains" includes any variation on the string.
Also, there is no need for @, either. -
How to set up rules for emails to go to junk on iphone 4
i have an iphone4 that i use for work and a coworker sent out over 40,000 emails which has now overloaded my email to where i cannot send or recieve emails can i set up rules for his emails to go straight to junk? and how my email address is linked to iphone4s and ipad as well.
ps i did set up the rules on my desktop but it didnt seem to work or flow over to the iphone or ipad or maybe i just need to delete the emails? however theres literally 30,000 of them who do i do that quickly? pleaseThe Mail app on the iPhone doesn't support filters. You'd need to do that on the server side (not desktop). There is just no quick way to delete 30,000 emails. At this point, I would remove the email account from your phone, delete the offending emails from your account, then add the account back to the iPhone.
I would also report the co-worker to your IT department (if they haven't already noticed) for sending that many emails. I'm surprised that it didn't cause issues.
Best of luck.
Maybe you are looking for
-
SAP KW - cannot check in info objects
Following error message pops up while selecting root object for creating structure: The SAP R/3 System reported the following error while trying to retrieve templates:42-638: Error when transferring data. Please advise.
-
I upgraded an AT&T and Verizon iPhone 4 to the ios 5 firmware, and I am having the same exact issues for both phones. When using the voice command a few times, the audio voice does not come through the "speaker" (referring to the speaker located at
-
Why does Illustrator CC screw up my DXF CAD layers?
I have all the lines, polygons, etc. on their desired layers in the CAD file; then when I import the dxf into Illustrator, it disorganizes it but putting all the objects into random layers. Why does this happen? I'm using Auto CAD 2014 LT.
-
I just bought an Ipad and it is in Chinese. How do I get it to English?
How do I set my Ipad to Englsih?
-
ORACLE TEAM WHERE ARE YOU?
I posted a topic below. Can the Oracle Discoverer team please respond, otherwise there is no use for this forum. null