Running automatic payment program in case of multiple legal entity

Dear SAP Gurus's
Our client is a big corporate group and it includes lot of legal entities and all the legal entities are configured as Company codes in SAP.
How to proceed for F110(Automatic payment program) in such a scenario where there will be lot of bank accounts and there will be restriction on end use of funds because loans are disbursed to meet the project requirments.
Suitable answers will be rewarded with points.
Thnaks in adavnce for your kind asistance.
Regards.
skp

Hi Surendra,
Access the transaction code FBZP in SAP to configure APP.
Few points if you design a APP.
All the company codes which are included in the payment run should belong to same country.
Centralised payments can be handled using options sending company code and paying company code.
Payment methods can be maintained for country and paying company code
Ranking order can be mentioned for the banks and the payment methods in APP
The amounts which you mention as available amounts are only PLANNED amounts for the number of days.
Please refer the below link to know more:
http://www.sapdb.info/configure-the-automatic-payment-program/
Thanks
Aravind

Similar Messages

While Running Automatic payment program can't post any of the vendor docume

Hi Team,
I am Running the Automatic payment program in (F110) by assigning all of my company vendors (Ex. 0 to 9999) Normally i will take 10 to 20 hours time to complete the proposal.
In time of APP running when i am trying to post the any of the vendor document it is not allowing to post and getting the error as " Account .......... is blocked by the payment run"
Please give me the solution.
How can we post any of the the vendor documents when the APP is running.
If the APP runs 20 to 30 hours means we can not stop the vendor transactions.
Thanks in Advance
Vasavi

Hi Vasavi,
I understood your question.
What Iam asking is you to run the APP in background. SAP gives you a option to run the APP in background using T.code F110S.
If you have multiple company codes and multiple vendors you can break the APP into several runs so that system will not take much longer time.
The solution given by me will reduce the time taken for APP but it cant resolve the blocking issue. Once your APP runs with in 12 hrs (May be you can schedule a job in night), this may not interrupt the regular business like posting of Invoices in F-43 etc.
Thanks
Aravind

How to run automatic payment program business area wise

dear all
please let me know how to run automtic payment program business area wise.
for example business area 2020 we want to make payment business area wise.
what are the back gorund settings for congigration Tc- fbzp
wht are the configrations forTC- f110
regards
babu

Hi,
You can make payments business area wise if you had ticked payment goup business area wise in the payment method in company code screen. However you will have to give company codes in the payment parametets, but payments will be grouped by business area.
Thanks,
Ramesh.

Issue in Running Automatic Payment Program

Hi all,
I have two open items in my vendor account which i want to clear using APP(F110). I have made all the relevant configuration in FBZP. But after creating the proposal, it gives an error "Err Message Text:016 Pmnt methods for this run are not specified in master record or in item"
Can someone throw light into this error. I dont know where to maintain the Pmnt method which i am using for this APP.
Thanking in advance,
Ficoguy.

Hi,
While processing F110, you give a payment method in the parameter tab.
That payment method should be either in the document line item or in the vendor master to enable the system to select the document line items.
So you have two options:-
(1) Go to FK02 and assign the payment method in the "Payment Transaction" tab in company code data of your vendor.
or
(2) Go to FB02, and give the payment method in the document line item for that vendor.
Option (1) will automatically enable all the documents for that vendor to have that payment method.
Regards,
Gaurav

Payment has got blocked while running Automatic payment program for vendors

Dear Experts,
Greetings for the day !
I created a proposal for 10 vendors out of which one vendor payment has got blocked. The blocked payment is there in REGUS table. I just want to include the vendor in the current proposal. What could be the possible solution.
Thanks in Advance

Hello dear,
If it is blocked, means there is minimum one reason. Can be related to missiing payment method in master record for vendor FK02. Or there are missiing customizing in FBZP for ranking order or missing combinations for Payment method/currency and bank account
Please check first the master record, the documents to be paid (the invoice) and FBZP settings, then correct what is wrong.
Then, delete your proposal and create it again in F110
Hope this help
Regards
Tarek

Business area wise Automatic Payment program run

Dear all
clarifications regarding Automatic Payment Program vs Business Area, They want to run Automatic Payment Program run Business Area wise
They want to run payment run with reference of business area
for example
1) BUSINESS AREA : A
2) BUSINESS AREA : B
Is it possible to enter business ares in automatic payment program run, if it is not possible what is the ultimate solution for this.
appreaciated
regards
babu
From Chandigarh to Chennai - find friends all over India. Click here.

Dear all
herre client is introdusing business area for running business
when i check in oby6 business area financial statments as required
if am going to pass a entry in f-02 the after assigning cost center the error is cost center not assigned to business area.
if i am going for caost center to assign business area in tc-ks02 here business area is required entry if i enterd business area if i saved that one the error is The field change business area isnot possible (transaction data already exists)
Field change Business Area is not possible (transaction data already exists)
Message no. KS134
Diagnosis
To ensure the consistency of existing data, you can only change object Business Area if no transaction data exists in the change period; that is, neither plan data nor actual data has been posted.
As transaction data already exists, it is not possible to change objects in this time period.
Procedure
If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...".
if i follow above menu bar edit-analysis period it is giving same error
appricated
regards
babu

F110 - Automatic Payment Program - Payment Proposal Error

Hi Folks,
I am running Automatic Payment Program on F110. I have completed all the procedure in FBZP.
The Error is
Company codes ZZZ1/ZZZ1 do not appear in proposal 07/30/2008 RUN01; correct
Its says,
No data exists for the specified paying company code ZZZ1 and the specified sending company code ZZZ1 in payment proposal 07/30/2008 RUN01.
It will be helpful, if someone can post the remedy.
Help will be surely rewarded.
Thanks,
Matthew

Hi,
The dates are not falling in the run date. So please change the dates in the Parameters tab in F110 i.e Posting Dates and Doc. Posted upto.
Regards
Balaji

Automatic payment program- Payment list Fields

Dear Experts,
After running automatic payment program when I am trying to view the Payment list(Edit-Payment-Payment list), I donu2019t see the check number in the payment document. Basically we need to see the check number because when the user take the payment list print out it gives the vendor related details with the amount but the authorized signatory need to see the check number as well along with the amount before signing the check.
So is there any setting that I can do to flow the check number in the payment list?
Any inputs are appreciated.
Regards
Paul

Hi I have found the solution on this.
Solution system is sorting the correspondence bases on vendor name and this setting is done when you set the payment method company code wise.
Also we can sort the payment list vendorwise.
Problem resolved.
Thanks for the input
Regards
Paul

Run date problem in F110 - automatic payment program

Hi.
I am trying to run the automatic payment program in F110. I am facing the problem with the run date in this transaction. System is not giving me any error if i give the run date as today's date or future date.
But in run date if i give previous date system is not executing the automatic payment program.
Eg: Inovice posted on 01.01.2012. It becomes due on 01.01.2012. I gave run date as today's date 04.01.2012 or future date the system is executing correctly picking all invoices. But if i give the run date as previous to the current date i.e., 02.01.2012 or 03.01.2012 then system is not executing this transaction.
This problem is coming for all company codes. So if there is any setting for restricting run date request you to help me in this regard where can i do such setting.
Regards,
Padmavathi

Hi.
My problem is solved.
Actually client is entering the documents with posting date for earlier months whereas he has entered the documents this month.
Therefore system is not picking the invoices in F110 - automatic payment program.
Actually the run date entered is getting copied to the parameters entered i.e., posting date and documents entered upto date.
Documents are entered in the system this month with posting dates of previous months. Therefore if i give the run date as this month date the run date is getting copied to doc entered upto date in the parameters tab as this month date. So only system is not picking invoices since invoices are entered in the system this month only.
Now we changed the date for doc entered upto with previous month date and system is picking the invoices.
Thanks a lot for your help.
Regards,
Padmavathi

Next payment run parameter in automatic payment program

hi gurus
why next payment run date must be given in parameters tab of automatic payment program
thanks and regards
ramesh

Dear,
yes but You should create a background job of F110S, where You define a dynamic date variable variant as per Your requirement, by SE36.
I hope this helps.
Mauri

Automatic payment program setting

Hi sir,
Could you resolve my below query :
What is the cycle for Automatic payment program setting ?

Hi,
Running AUTOMATIC PAYMENT PROGRAMME:
T Code F110 process,
Enter the following things,
Rundate : Can be today's date
Indentification : Anything (eg. app, app1, aap2)
and press enter, and go to parameters tab,
Posting Date : Can be today's date (Payment entry posting date)
Docs entered up to : Can be today's date (here specify the date till that date dues will be considered)
Company code - Your company Code
Payment method - Your PM
Next P/Date - Enter next payment run date (dues will be selected one day before that date)
Customer / Vendor : enter the customer / vendor or its ranges
GO to free selection tab,
Field Name : Select any option if you wanted to restricted to it (It looks like non-seletable means grayed out but you can select it) you can select Business area to make payment only to that BA or click on Exclude values to exclude that BA alone
Values - give the values of your selection. If it is multiple selection, use "," (commas) to understand it.
Go to additional Log tab,
X - Due date Check
X - Payment Method selection in all cases
_ - Payment method selection if not sucessful
X - Line item of the payment documents
and again give the vendor or customer or its ranges here also.
Goto Printout / data medium,
Against your program - Give some varient name (eg. APP) and click on maintain Varient tab on the top it will take you to the next screen,
There you can select Individual selection and your Co Cd
and it will take u to one more screen, there give
Program run date : Rundate entered at very first
Identification feature : give your identification
Paying company code : Your company code
Payment method : Your payment method
House bank : Your HB
Account ID : Your HB ID for payment
Check lot number : Give check lot number Maintained in FCHI
Print check - Printer name
and select and give the information where ever you feel it is required. And go back it will ask u to save the varient, do the it.
Now click on Status, now again it will ask you to save, do it. Now click no proposal tab, it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment proposal has been created" in the status.
Now you can check the proposal log,
If the proposal Log is OK then, click on Pmnt Run tab,
it will pop-up one window, there
X - Start Immediately; X-Create payment medium and tick
Keep refresh it till you get the message "Payment run has been carried out" in the status.
Now you can check the payment log also, to check the same
Now you can click on Printout tab,
X - Start Immediately; Job name - Delete ? and give some reference like APP1 etc., and tick
Now goto your own job to see the whether it is completed or not and from there you can goto your spool request to print the check.
Bank configuration:
To set up Electronic Bank Statements (EBS)
1. Create House Bank and Account ID (FI12)
2. Setup EDI Partner Profile for FINSTA Message Type (WE20)
3. Configure Global Settings for EBS (IMG)
- Create Account Symbols
- Assign Accounts to Account Symbols
- Create Keys for Posting Rules
- Define Posting Rules
- Create Transaction Types
- Assign External Transaction Types to Posting Rules
- Assign Bank Accounts to Transaction Types
4. Define Search String for EBS(Optional)
- Search String Definition
- Search String Use
5. Define Program and Variant Selection
Additional information is also available in the SAP Library under:
Financial Accounting > Bank Accounting (FI-BL) > Electronic Bank Statement >
Electronic Account Statement Customizing.
Bank Reconcilliation Statement
The following are the steps for BRS:
Create Bank Master Data - This can be created through T.Code FI01 or you can also create the house bank through IMG/FA/Bank accounting/Bank account
2. Define House Bank
3. Set up Bank selection payment programe- IMG/FA/ARAP/BT/AUTOIP/PM/Bank selection for payment prg.
a. setup all co codes for payment transaction - Customer and vendors
b.setup paying co codes for payment transactions
c.setup payment method per country
d.setup payment method per co code for payment transaction
e.setup bank determination for payment transaction
Please go for Cheque mangement using T code FCHI (IMG/FA/ARAP/BT/OP/AutoOp/PaymentMedia/CheckManagement) and for void reasons FCHV. You can create Bank Reconcilliation statement by TC FF67 (SAP/AC/Treasury/CashManagement/Incomings/ManualBankStatement) . Don't forget to keep the opening Balance as zero. Use FBEA for post process.
All the steps together will lead to (FF67) Bank reconciliation statement.
Thanks,
Prithwiraj.

Payment Proposal Error in Automatic Payment Program

While I am running the Automatic Payment Program Run after passing on the Parameters, I have created the Payment Proposal.
When I am trying the edit the payment prosal to block payment of some of the invoice line items, system is throwling a red signal error (Payment/Exception). I am not able to edit the payment proposal and proceed further.
Kindly help me out as the proje4ct has gone live and it is a critial requirement.
Thank you
Ravi
Mobile 9849393564

check with fowlling cases
1. payment terms
2. cash discounts
3. with- holding tax
4.next payment rundate
5. check payment block
let me know even checking of these things u have the same problems.
just now i discussed u over phone
if it is userful assgin the points
regards
venkat.

Automatic Payment Program - clarifications

Hi SAP Gurus,
I have a generic questions on Automatic Payment Program run,
1) How can i make a payment say for 100 invoices belonging to 10 vendors through 4 different House Banks. I know that we need to maintain the House Bank details in Vendor Master but for this example say House Bank is not maintained in any of the vendor masters and also in invoice documents, then in this case hope the system will pick the House Bank based on the ranking order in the configuration but i don't want to pay through these House Bank but through 4 different House Banks. How this can be achieved?
2) I have maintained the House Bank ABCD in the vendor master and posted 100 vendor invoices with different amounts and all invoices are due for payment but while running the payment run the balance in ABCD House Bank is nil and to ful fill the payment i have to use two different House Banks say EFGH and IJKL, how this can be achieved?
I would be greatly thankful to your replies.
-Kumar

Hi,
You can use the below BTE (BusinessTransactions Events) in FIBF:-
00001810 PAYMENT PROGRAM: Individual bank determination
The sample function module is SAMPLE_PROCESS_00001810
The purpose of this interface is to provide a way of individually determining which of its own bank details and which partner bank details should be used for a payment. The authorized bank details are then transferred in table form. If you do not wish to use some of the banks determined, you can set the indicator XCUSF on the relevant line.
You can search SDN etc. on learning how a BTE can be used.
Regards,
Gaurav

Automatic payment program process

Hi,
plz tell me the process of Automatic payment program?
how to execute the program and wht are the steps involved while running this Automatic payment program..?
pls give me a detailed explanation on Automatic Payment Program?
Regards
Ajay..

Dear, As found..
Automatic payment program in SAP selects appropriate invoices to be paid based on following paramete:
1. Documents entered upto. The selects invoices entered in SAP system with entry date upto the date specified in the filed.
2. Nex payment run date: The progam selects invoices in SAP system whcih will be overdue or incur lost cash discounts if paid on the date specified in this field.
When executing the automatic payment program (F110 transaction), a proposal run must be always be carried out in SAP system first. The proposal list will sometimes include exceptions.
Common exceptions are:
SAP Invoice contains payment block. To pay this invoice, remove the payment block when editing the proposal list (unless the payment block is one whch cannot be edited during payment proposal) or remove payment block via FB02 for each SAP invoice.
Payment method in vendor master/invoice is different from the one specified in the payment program parameter. To pay this invoice, allocate the payment method in the parameter of the payment run to this invoice while editing the proposal list.
Vendor master does not contain information specified as mandatory in the payment method in teh paramter of the SAP paymement program. For example, depending on the payment method configuration for the country, certain fileds such as city or PO Box must be populated in the vendor master. In this case, delete the proposal run, make the necessary changes in the vendor master and execute the proposal run again.
Typically, Payment program pays due invoices in full. To cater for partial payment via automatic payment program, payment request will be used (optional). Down payments to staff and vendorcan also be made via the automatic payment program if down payment request was posted.
If foreign currency invoice is paid via automatic payment run, the relevant exchange rate type should be selected in the payment run parameter. Exchange rate gain/ loss on making the payment will be automatically posted to their relevant profit and loss account based on the reconciliation account of vendor.
The payment method specified in the parameter of the payment program determines the bank account and the GL account used to make the payment. Also, depending on the payment method, cheques, other forms and payment files will be generated.
Continued....

Problem in Printing cheques in Automatic Payment Program

I have configured a APP and I am running a payment program for trial by using transaction F110. The same is running through and creating a cheque print job in the spool. But when I am printing a single cheque the system is taking double printouts. When I am printing multiple cheques the system is taking double printout of the last cheque.
I was told that this is a BASIS problem, but I am not sure of this.
Can you please let me know if it seems to be a BASIS problem and if yes, can anyone give me a resolution to it?

Hi,
This error comes when you dont have authority to run the job. If this is the case go to SU53. You can find the object for which you are not authorized below "Authorization check failed". Take a screen shot and talk to your Basis for giving you the authority.
For the second possibility Check SM37, select the job status scheduled and then click on execute. It will show all the jobs. Select the particular job and release.
Hope this helps
Reagrds
Pratiksha

Running automatic payment program in case of multiple legal entity

Similar Messages

Maybe you are looking for