Running RoboHelp 10 and RoboHelp 11 on the same system

Background
Windows 7, 64-bit operating system.
Upgraded RoboHelp 10 to RoboHelp 11 this week. Upgraded my RH10 WebHelp Proj project (released with our 2.0 application) to start editing for release with 3.0 application next June .
The upgrade did not uninstall RoboHelp 10.
I work from within Visual Studio 2010 Professional. (I know that this is not a Source Control thread, but my issues are intertwined here.)
I create WebHelp Pro (even though we are not yet publishing to RH Server, although we're working on it!).
I check the output into Release folders in Souce Control, and the build picks up the files for installation with our application.
Questions
If I need to update the 2.0 application Help, does anyone know whether I can still use RH10 to update that project? (I've posed the question to an Adobe consultant, but have not yet heard back.)
If I can't use RH10 to update the 2.0 application Help (and have to open the 2.0 project in RH11 and, therefore, upgrade it), are there new things in RH11 that could affect the WebHelp Pro output and, therefore, affect the use of the WebHelp Pro HTM files by the application? (Our release engineer believes that, for version control purposes, I must make changes to the 2.0 project in the same RH Client used to develop it.)
Thanks for any help.
Carol Levine
AIR Worldwide

Hi,Carol
First, (and to reiterate what Rick said) if you are not publishing to RoboHelp Server right now. Do NOT use WebHelp Pro. The Pro flavor is strictly for hosting on a RoboHelp Server installation.
The good news is that when and if you do decide to use RoboHelp Server, you simply take the Rh project (whether from Rh 10 or 11) and publish it with the WebHelp Pro SSL. It sounds like there is a some confusion between RoboHelp Server and Source Control. It is a common option to use RoboHelp Server and Source Control. But they are mutually exclusive. (While both may be used, they have nothing to do with one another.)
If you think about it, RoboHelp Server is output (by definition not "source")
So, you can continue using Rh 10 and 11 clients on the same computer, but as you note, you cannot open an Rh 10 project in Rh 11 because it is a one-way forward conversion (as Peter said).
As for publishing, be aware that when you move to RoboHelp Server, the publishing workflow is different. The web admin can't simply copy/paste WebHelp Pro output (from source control as you describe) to the Rh Server (or, as you said, "pick up files"). The project must be published from the RoboHelp 10/11 client directly to the Rh Server. This is because Rh Server is a database application and in order for the database to be "aware" of the new content, it must come from the RoboHelp client app (10 or 11). Also, in terms of Application Help and context sensitivity, there is a CSH API and a syntax that is used to call the Rh Server help topics from the application. This is covered in the online help. See the sub head "Access context-sensitive Help" in the Adobe RoboHelp Server 9 * RoboHelp Server Web Administrator tasks as well as Adobe RoboHelp 11 * Program Help for web pages
Thanks
John
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Similar Messages

Can I run Photoshop CS4 and CS5 on the same system?

I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
Run on the same system - not ness to run at the same time
Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
Thanks in advance for your help
BJ

Yes, you can run CS4 an CS5 on the same computer. They install in different folders and don't get in each other's way. As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5. This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
When I installed PS CS5 I had problems with my scanner driver. Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

Is it possible to run VLM and lmtools on the same machine

hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

Hi SvenNittmann,
in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
Volume License Manager on a Virtual Machine - National Instruments
http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
I also use VLM in a virtual machine and I could recommend you the same solution.
Regards, Stephan

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.

Since upgrading to Mavericks, I can't run Mail and Safari at the same time.
Either Mail will crash or the iMac will run so slowly as to be unusable. With both running, the HDD spins constantly at a high rate of speed.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Configuring tomcat and apache on the same system

i need to configure tomcat and apache on the same system.
first i have configured apache and it is working well.
Next is have configured tomcat and it is working well.
i need to interlink tomcat and apache. so i downloaded jk connector and i have configured it.
i gave an entry in the httpd.conf as
Include /tomcat/conf/auto/mod_jk.conf
i have copied the file mod_jk.so to /usr/local/apache/libexec/
went i start apache after the entry is given it gives the error like this
cannot load /usr/local/apache/libexec/mod_jk.so into server: ld_so.1. /usr/local/apache/bin/httpd: fatal : libgcc_s.so.1 : openfailed : no such file or directory in linux
please help to configure this.
i have done every thing as it is in apache.org documentation. please give the complete configuration. some say that tomcat is not compiled according to apache1.3. but i configure jk connector as --with-apxs=/usr/local/apache/bin/apxs
send me the reply
thankqs in advance

Hi,
I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
Anand

Running Leopard and Tiger at the same time VMWare fusion/Parallels?

Hello,
I was wondering, is it possible to run Tiger and Leopard at the same time? Some older applications won't run properly in Leopard. The iMac came both with Tiger and Leopard (last November). It has been described elsewhere that one can install Tiger and Leopard on separate partitions and switch by rebooting. But it would be nice if one could run Tiger in Leopard like one can run Windows/Unix using VMWare Fusion or Parallels. Is that feasible?
best wishes

I agree with you that virtualizing Mac OS X would be great. I'm an Apple technician and it would really help with my work. But Apple's EULA does not permit the use of OS X in a VM. They changed OS X Server's EULA recently to permit it, but not the "client version".
So your Mac can virtualize nearly any OS out there, but not OS X. And I believe (not sure) that a VM of OS X Server will only run on OS X Server.

Running WEP and WPA2 on the same virtual AP

Hi Forum,
Is it advisable to run WEP and WPA2 on the same virtual AP sharing the same antenna?
rgds,
paul

Paul,
This shouldn't be a problem, so long as you have one SSID for WEP, and one SSID for WPA2. The antenna itself will not come into play for what type of encryption that is used.

NetWeaver 7.0 and ERP to the same system

Hi,
We currently have a SAP ERP Development system with SAP ERP 2005 (ECC 6.00, kernel 7.00) with ABAP only (not Java).
We would like to install a Business Intelligence (BI) system but we don't have any other available server.
I would like to know if it is possible to install SAP Netweaver 7.0 (including BI) in the previews mentioned system. Is there a Guide available?
The second question that I have is if it is proper for BI to have a development and a production system?
Thanks.

Hi,
check the other thread if it can help you,
ECC and BI in the same system
For BI, you may have only ABAP or both ABAP+JAVA. in case of only ABAP you can't use the BI functionality on Java. Now what functionality you would get extra in BI-Java, check here..
http://sapport.blogspot.com/2008/03/business-intelligence-java-components.html
Regards,
Debasis
Edited by: Debasis Sahoo on Apr 16, 2009 10:59 AM

Running RIPv2 and OSPF at the same time

What are the problems with running RIPv2 and OSPF at the same time if any? I have the gear capable of that and I have been doing this for over a year now. I wanted to get rid of RIP but my couterpart is scared because he is not OSPF skilled. I do have some remote sites with old 1601s to consider. Any suggestions or recommendations.
Thanks

Hi Friend,
OSPF is far better than RIP when it comes to performance and advatnages compared to RIP and no doubt in that though it is complex to implement compared to RIP but once done it is smooth.
It is important to have a very well designed network with OSPF otherwise the behavior is unpredictable sometimes and it may not give desired results.
Also for your low capability routers like 1601s you can put them into stub or total stubby area so that they may have less load on them.
HTH
Ankur

Why can't I run Safari and Skype at the same time without making my computer freeze up?

I can't believe I can't run Safari and Skype at the same time without my computer freezing up, it's a MacBook Pro with Mac OS 10.6.8 and it has an Intel Core 2 Duo CPU with 2.2 Ghz and 2 Gb of RAM. Is this a hardware problem or a software problem?

I haven't gone to the trouble of actually testing to see which uses more CPU power, but Firefox has been faster than Safari on every Mac I've ever owned.
To see CPU usage by process, open the terminal (in Utilities) and enter 'top' at the command line. You might have to expand the window as processes don't appear in any logical order.
It could also be hardware-related: I have late 2009 mini with similar specs and it pinwheels easily.

Can I run Tiger and Leopard on the same computer

Hi folks.
I've been meaning to install Leopard for ages but have never got round to it (I bought the retail box when it first came out). I have upgraded my RAM to 2GB and my hard drive to 320GB with no problems.
My upgraded hard drive has been partitioned into 2 equal parts of 160GB. These appear on desktop as Mackintosh HD1 and HD2. HD1 is the disk with all my files, music, OS etc and HD2 is empty
I have 2 bootable clones of my present system - one is on a 160GB external and the other is the original 80GB HD that I replaced.
My question is this - can I install Leopard on to my 160GB external HD, then clone it on to the empty HD2. If I do this would I be able to run both Tiger and Leopard on the same Macbook?
Is there any problems with this plan? Would I be able to transfer between the 2 OS and how do I install Leopard on the external drive. Is it just a case of inserting the Leopard DVD and choose the external drive as the target?
As usual thanks in advance
Del

# Original Tiger in the internal HD, New Leopard in the external HD.
# New Leopard in the internal, Legacy cloned Tiger in the external.
# Split internal, one partition with Tiger, another with Leopard.
Leopard is backwardly compatible with older Macs, just make sure yours fulfills the minimum system requirements, both use the same filesystem format, so each can see the other. You can't run both at the same time, unless you purchase the server version of Leopard and run it virtualized. 99.9% of Firewire external HD's are bootable, some USB's are bootable but have to test first. You can choose which system to boot from by pressing the Option key at boot time, before the chime. Just make sure the external HDD is plugged in and turned on if that's where you want to boot from.
When I migrated my PBG4 from Panther to Tiger, got an external FW HDD, cloned Panther onto it, upgraded using Archive and Install, cleaned up, customized and tested it. When I was satisfied all was ok, cloned the original Panther onto another partition of the external HDD, wiped and tested for failure the internal HDD, then cloned the known good and tested Tiger into it. Only thing that died along the way was my old and ancient Photoshop v2.x, that refused to run on Tiger.

I have a Mac Pro with Snow Leopard and FCP7 installed I would like to run FCP7 and FCPX on the same computer, is this OK

I have a Mac Pro (early 2009) with Mac OS X version 10.6.8, I use this for video editing with FCP7. I would also like to install FCPX, my operating system is Snow Leopard. Is this OK or do I need to up-grade my operating system. I want to be able to use FCP7 and FCPX on the same Computer. Your advise will be appreciated.

You will see from the hardware spec that the latest version of FCP X requires Mavericks.
The Mavericks spec shows you can upgrade to Mavericks on your Mac Pro.
Ensure you have a bucket full of RAM installed.
Final Cut Pro X spec
Mavericks hardware spec

Installing 10g and 11g on the same system?

I have Windows XP and have installed 10g database. Can I install 11g on the same system and I can switch to use either of database?
Thanks in advance.

Hi,
I'm working in a linux machine and choose to use also two different users. Of course I'm using two different ORACLE_HOME directories.I think that the best approach.Just a question ,are you keeping the "GROUP" same or different?
Anand

Running Solarisx86 and Linux on the same PC

I am trying to run Windows, Solaris_x86, and Linux on the same PC to work
on my application. Unfortunately Solaris_x86 partition ID is the same as
Linux swap partition ID (82). When I run Linux it destroys all Solaris
partitions. A way around is to to use partiotion/boot manager (Ranish) to
change Solaris partiotion ID to somthing else which Linux does not mess
up before booting Linux and reversing the partiotion tables before
booting Solaris_x86. This is not a good solution since I sometime forget
to do the changes. Is there a better way?
Regards
Andrej

First install linux then after solaris also never create a linux swap in primary try dos extended

ECC and BW in the same system - Gotchas?

From the documents, and from the information from SAP, it appears that BW 3.5 can be installed into an ERP 2004 / ECC 500 system. Does anyone have any experience with this during the ECC 5 rampup?
I have a client that is considering this and would like to know of any gotchas before we hit them.
For instance the documents mention you need to tune the Oracle database with the parameter "star_transformation_enabled=true", which is normally used in a BW system. What impact, if any, will that have the ECC side of things?

Hi John,
Just to respond to your post and clarify some of the areas.
1. The mySAP ERP 2004 ECC 5.0 and it's internal SAP BW is <b>not</b> an MCOD implementation. The SAP BW is internal with the ECC (same instance, same database schema, and same database. Whereas MCOD is different instances, different schemas, but same database. One important point is that MCOD and mySAP ERP 2004 fully support three tier architecture.
2. MCOD was <u>not</u> recommended for a mix of OLTP and OLAP applications on all databases until recently (e.g. recommended for SAP R/3 Enterprise and mySAP SRM but not SAP R/3 Enterprise and SAP BW). This has recently changed where a combination of OLTP and OLAP is now supported: See http://service.sap.com/mcod or see SAP note 712777.
3. SAP BW Performance: In a mySAP ERP 2004 ECC 5.0 system with the internal SAP BW functionality active, the system must be configured for both the transaction processing and OLAP functions. This configuration must include load balancing if you have high usage. Without load balancing you are unable to target activities to specific servers or separate different user groups. Obviously if you have only one server load balancing is not available. It is strongly recommended to use the three system configurations for SAP ERP applications and SAP BW.
4. Automatic multiple Instance shutdown:
For MCOD this is not the case that shutting down one system in your MCOD installation will also shutdown your other MCOD systems; this only happens if you also close the database (remember it is the only part that this shared). The instances can be started and shutdown independently.
For the internal SAP BW within ECC 5.0 you have "one system" so if you shut it down, you really shut it down.
5. Impact of applying patches or doing client copies:
For MCOD systems, the systems are independent and can be patched and administered independently. The only common part is the database. The database maintenance and patching does affect all the connected MCOD systems. For processes like system copies, these are also independent of the other systems. Obviously if you share the same server for the different systems you need to take care with CPU and memory usage of these functions.
As SAP BW within ECC 5.0 is the same system, you have to patch the system all at once (recommendation is to use SP-Stacks). A SAP_BASIS support package applied to ECC is also applied to SAP BW at the same time. With regard to client copies, client copies are only supported for ERP 'OLTP' clients (not for the SAP BW client).
6. "The headaches just are not worth it....especially since server prices are low"
I would not totally agree with this comment. For mySAP ERP this low price server argument also works for adding more app servers to ERP and doing load balancing. The use of MCOD or the internal SAP BW within ECC will be made on a number of factors by the customer with different weighting being applied to each of the Pros and Cons.
The new "internal SAP BW within ECC 5.0" gives customer's system architects more options and increases the flexibility of the total solution in general (delivery of a centralized EDW, deliver of operation reporting, deliver of application or organization specific datamarts to name a few). With more options and flexibility, more decision points need to be reviewed and analyzed which can be a good thing.
I hope this helps,
Mike.

Running steps and sequences at the same time

Hi,
I need to run some steps and sequence at the same time in my application due to test time restrictions. I am using Teststand 2.0. Colud you please describe me the methodology.

Hi,
Synchronization Step types came in at version 2 and there should be an example in the \teststand\examples folder.
Regards
Ray Farmer
Regards
Ray Farmer

Running RoboHelp 10 and RoboHelp 11 on the same system

Similar Messages

Maybe you are looking for