Runtime Service not Available after Copy

Hi
OWB 10g,
Oracle DB 8.1.7.4.12
I'm trying to copy the whole database, including all OWB and Runtime Repository and reload to another server.
After that, OWB client works fine but when I try to connect Deployment Manager, the error massage shows: Runtime Service not Availabe. ( the Runtime connection properties are changed to match the new server). I then tried to manually start the runtime service, the error massage shows: Not available. And I then run Service_Doctor, it shows "Platform Service Not Available".
For what I searched from metalink and here, the solution is always saying 'Reinstall the Runtime Service'.
Is there any idea that I can make it work without reinstall because I don't want to start from scratch to redeploy and reload all of my data?
I'm waiting on line.
Thank you,
Daming

Hi Igor,
I manually change table wb_rt_servuce_nodes with the proper hostname, service name, OWB home name. Also check the value in OWBRT_SYS.OWBRTPS, no problem. But Runtime service still not started. So I give up and then try to do it from scratch.
I tried to reinstall all the repositories (OWB and runtime ) on the new server and still got the same problem.
What I've done is drop all the repositories via Runtime Assistant and then done 'drop user rtr cascade' from sqlplus for all the target schemas and rtr/rtu. Then create new reopositories again. After that I restart the database , runtime service not started. Then I tried manually start it, failed.
Anyidea? Should I reinstall the software?
Thanks,
Daming

Similar Messages

Could Calendar services not available after reboot be LDAP problem?

I followed this installation guide:
https://wikis.oracle.com/display/CommSuite7U2/Communications+Suite+on+a+Single+Host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
I have successfully installed and set up the Oracle UCS Sun7 update 2 server. Calendar works ( if I don't reboot the server ).
However, when I reboot the server, Calendar service is unavailable.
Important information for when I installed Oracle UCS sun 7 update 2 by following the installation guide:
I have noticed when browsing through the folders, that there was already a 'dsee6' folder for the Oracle Linux I started from. Following the example installation for the Oracle Linux 5 with GlassFish install, I was instructed to download a new Directory Server. Following the instructions on page 7 of the install guide listed above, I made another folder 'dsee7'. I am wondering if I should never have downloaded this new Directory Server as instructed on page 6 "Get the Software". The install guide actually does not mention where to get the Directory Server from, so I just went to the edelivery site and figured it out myself. Anyways, under the "Installing and Configuring Directory Server" section, #3, I was instructed to "mv dsee7 /opt/sun/directory". In this folder, /opt/sun/directory/bin, there will be "./dsadmin" utility that can be ran. This is used to do many things with the Directory Server including starting it. Here is how I started it:
cd /opt/sun/directory/bin
./dsadm create /var/opt/sun/directory/dsins1
./dsconf create-suffix "0=isp"
Also, I downloaded the Directory Server from edelivery - Oracle Directory Server Enterprise Edition 11gR1 Patch Set 1 for Linux x86-64
Then, I ended up running to get it set up:
./dsccsetup ads-create
./dsccsetup war-file-create
$ ./dsccsetup cacao-reg
./dsccsetup status
Then, it looked like the dcss agent is registered in cacao.
So, if we forward ahead to page 9 of the install guide, "Preparing the Directory", I ran this and prepared the directory. After I finished installation, I could restart the Directory Server with no problems, as long as I did not reboot the machine. I would restart the Directory Server like so:
cd /opt/sun/directory/bin
./dsadmin stop-domain domain1
./dsadmin start-domain domain1
However, if I rebooted the machine, I could still start and stop the Directory Server as noted. But, the Calendar Services were not available.
The only reason I wonder about this LDAP Server possibly being the cause of this is because I had at one point configured the services to start on boot. I followed these instructions:
https://wikis.oracle.com/display/CommSuite7U2/Start+and+Stop+Scripts+for+Communications+Suite+%28Linux%29
I am using a VMSphere client to host this set up. So, since that point of configuring the services to start up, I have rolled the snap shot back so that the services are no longer set up to start on boot. But, when they were, and I rebooted the machine, I could see ldap 389 errors all over the place. So, that lead me to roll my snap shot back in effort to try and fix the ldap errors. I no longer get LDAP errors since I rolled my snap shot back. But, like I said, I no longer have any of the services, including the LDAP, to start on boot as noted in the above link that instructs us how to do this.
After reboot, I run these commands to get the server up and running:
Start GlassFish server:
cd /opt/sun/SUNWappserver/bin
./startserv
Start web ( Messaging Server I think ):
cd /opt/sun/comms/messaging64/bin
./start-msg
Start LDAP ( Directory Server )
cd /opt/sun/directory/bin
./dsadm start /var/opt/sun/directory/dsins1
Start Mysql
cd/etc/init.d
./mysqld start
All of those commands complete without problem. I can log into the convergence web, I can hit the delegated administrator, I can log into the GlassFish admin console, and I can see my calendar folder when I hit it in the web ( http://myServer.com/davserver/dav/home/userName/calendar/ ).
So, in summary, I am wondering if anyone knows if this supposed second Directory Server is causing my problems since I started with Oracle Linux 5 and Oracle Linux 5 appeared to have the folder dsee6 already installed with it. Could this be why my calendar services are not starting after reboot but are working before reboot?
( Also, all of my posts keep getting deleted. Can someone please email me if someone from Oracle is deleting my posts and tell me why they are getting deleted? )
Edited by: ntfytim16 on Mar 5, 2012 7:41 AM
Some of my steps were out of order. Cleaned them up so it is easier to understand.

Here is my error0.log which is in the /var/opt/sun/comms/davserver/logs folder:
=========================
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.033-0500] <...DavServer.loadBackend> Loading backend ischedulebackend with backendid ischedulebackend
INFO [2012-03-01T05:10:26.034-0500] <...DavServer.loadBackend> JDBC JNDI Name = jdbc/ischedulebackend
SEVERE [2012-03-01T05:10:26.177-0500] <...JdbcBackend.queryDatabaseType> Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.
SEVERE [2012-03-01T05:10:26.177-0500] <...DavServer.loadBackend> failed to instantiate or create backend com.sun.comms.davserver.backends.BackendException: Cannot get Initial Database Information: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Communications link failure
Last packet sent to the server was 0 ms ago.(OPERATION_NOT_SUPPORTED)
INFO [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule enabled
WARNING [2012-03-01T05:10:26.209-0500] <...DavServer.loadBackends> iSchedule URI is configured but can't find ischedule backend.
SEVERE [2012-03-01T05:10:29.567-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
SEVERE [2012-03-01T05:10:29.568-0500] <...LDAPSingleHostPool.buildConnection> buildConnection: got LDAPException while connecting to Pool number:0. Host=myServer.com :netscape.ldap.LDAPException: failed to connect to server ldap://myServer.com:389 (91)
WARNING [2012-03-01T05:10:29.568-0500] <...LDAPFailoverPool.getConnection> Fatal Error: All LDAP servers are down.
======================
Does that look like an LDAP issue to you?
"Fatal Error: All LDAP servers are down."
Edited by: ntfytim16 on Mar 5, 2012 10:13 AM
Changed one server address

503 Service not available

Hi.
Could you help me ....
I modified a bsp to display a PDF file into a new popup window, and I tested into my quality server using SE80 transaction and with my portal application after and evething was OK but when a released the new BSP into production server the BSP crashed.
This is the error message that throws:
503 Service not Available
Erro 6
Version 6040
MOdule http_j2ee_mt.c
Line 795
Server EMKIOAIX103_CRP_00
Details Cannot reach external application server on localhost:50000
I explain you my program does it:
1.- the user chooses the a record into a Inbox
2.- IC display its data with BSP IRecReason
3.- the user chooses a Action link
4.- IC display a action PRINT PDF
5.- the user selects a print pdf
This is my code to EH_ONGO than create the PDF spool
METHOD EH_ONGO .
DATA: function_name TYPE rs38l_fnam,
        dummy(254)        TYPE c,
        ls_archive_index TYPE toa_dara,
        ls_orderadm_h     TYPE crmt_output_orderadm_h_com,
        ls_activity_h     TYPE crmt_output_activity_h_com,
        ls_lead_h         TYPE crmt_output_lead_h_com,
        ls_opport_h       TYPE crmt_output_opport_h_com,
        ls_orgman_h       TYPE crmt_output_orgman_h_com,
        lt_partner_h      TYPE crmt_output_partner_h_comt,
        ls_pricingdata_h TYPE crmt_output_pricingdata_h_com,
        ls_sales_h        TYPE crmt_output_sales_h_com,
        ls_shipping_h     TYPE crmt_output_shipping_h_com,
        lt_payplan_d_h    TYPE crmt_output_payplan_d_h_comt,
        ls_customer_h     TYPE crmt_output_customer_h_com,
        ls_cumulat_h     TYPE crmt_output_cumulat_h_com,
        lt_billing_h     TYPE   crmt_output_billing_h_comt,
        lt_cancel_h      TYPE   crmt_output_cancel_h_comt,
        lt_appointment_h TYPE   crmt_output_appointment_h_comt,
        lt_billplan_d_h TYPE   crmt_output_billplan_d_h_comt,
        lt_billplan_h    TYPE   crmt_output_billplan_h_comt,
        lt_status_d_h    TYPE   crmt_output_status_d_h_comt,
        lt_status_h      TYPE   crmt_output_status_h_comt,
        lt_srv_subject_h TYPE   crmt_output_srv_subject_h_comt,
        lt_srv_reason_h TYPE   crmt_output_srv_reason_h_comt,
        lt_srv_result_h TYPE   crmt_output_srv_result_h_comt,
        ls_acs_h         TYPE   crmt_acs_h_com,
        lt_orderadm_i    TYPE   crmt_output_orderadm_i_comt,
        lt_orgman_i      TYPE   crmt_output_orgman_i_comt,
        lt_pricingdata_i TYPE   crmt_output_pricingdata_i_comt,
        lt_pricing_i     TYPE   crmt_output_pricing_i_comt,
        lt_product_i     TYPE   crmt_output_product_i_comt,
        lt_sales_i       TYPE   crmt_output_sales_i_comt,
        lt_shipping_i    TYPE   crmt_output_shipping_i_comt,
        lt_schedlin_i    TYPE   crmt_output_schedlin_i_comt,
        lt_customer_i    TYPE   crmt_output_customer_i_comt,
        lt_partner_i     TYPE   crmt_output_partner_i_comt,
        lt_item_cstics_i TYPE   crmt_item_cstics_tab,
        lt_billing_i     TYPE   crmt_output_billing_i_comt,
        lt_cancel_i      TYPE   crmt_output_cancel_i_comt,
        lt_finprod_i     TYPE   crmt_output_finprod_i_comt,
        lt_ordprp_i      TYPE   crmt_output_ordprp_i_comt,
        lt_appointment_i TYPE   crmt_output_appointment_i_comt,
        lt_billplan_d_i TYPE   crmt_output_billplan_d_i_comt,
        lt_billplan_i    TYPE   crmt_output_billplan_i_comt,
        lt_orderadm_i_qt TYPE   crmt_output_orderadm_i_qt_comt,
        lt_orderadm_i_in TYPE   crmt_output_orderadm_i_in_comt,
        lt_schedlin_i_cf TYPE   crmt_output_schedlin_i_cf_comt,
        lt_status_i      TYPE   crmt_output_status_i_comt,
        lt_working_set_e_s_bbp TYPE /1cn/working_set_e_s_bbp_t,
        lv_language LIKE sy-langu,
        lo_order TYPE REF TO cl_doc_crm_order,
        lv_object_guid TYPE crmt_object_guid,
        lv_object_kind TYPE crmt_object_kind,
        lv_status TYPE jstat,
        lt_status TYPE TABLE OF jstat,
        lv_error_tab_wrk TYPE ssferror,
        ls_output_options TYPE ssfcompop.
DATA: IP_SMART_FORM Type     TDSFNAME,
      IO_APPL_OBJECT Type Ref To OBJECT,
     IO_APPL_OBJECT Type Ref to CL_DOC_CRM_ORDER_H,
      IO_PARTNER Type Ref to CL_PARTNER_PPF,
      IS_ARCHIVE_INDEX Type TOA_DARA,
      CT_ARCHIVE_INDEX_TAB Type TSFDARA,
      IS_ARCHIVE_PARAMETERS Type ARC_PARAMS,
      control_parameters TYPE ssfctrlop,
      IS_MAIL_APPL_OBJ Type SWOTOBJID,
      IS_MAIL_RECIPIENT Type SWOTOBJID,
      IS_MAIL_SENDER Type SWOTOBJID,
      IP_USER_SETTINGS type TDBOOL,
      ES_DOCUMENT_OUTPUT_INFO type SSFCRESPD,
      ES_JOB_OUTPUT_INFO type SSFCRESCL,
      ES_JOB_OUTPUT_OPTIONS type SSFCRESOP.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
      lt_lines       type table of tline,
      ls_line        type tline,
      l_pdf_len      type i,
      lv_exist       type n,
      output_data    type ssfcrescl,
      lp_proc_stat TYPE ppfdtstat.
Explanation: this method executes the action,
gets the medium, gets the log, reads the messages from
the log and gets the spool id from the messages.     JLARIN 27/DIC/06
DATA: lv_event TYPE REF TO cl_htmlb_event_tableview,
      lv_index TYPE int4,
      wa_action TYPE LINE OF crmt_action_table_tab,
      ls_action_obj TYPE REF TO if_action_ppf,
      lr_action TYPE REF TO cl_trigger_ppf,
      lr_medium type Ref to     if_medium_ppf,
     ls_action TYPE zcrmt_action,
      lv_spoolid TYPE symsgv.
DATA:
     grid   type ref to cl_crm_ic_gridlayout,
     GLOBAL_EVENT     type string.
data: lo_trigger type ref to CL_TRIGGER_PPF,
      lo_sfprint type ref to CL_SF_PRINT_PPF,
      lo_typed_context type ref to CL_CRM_IC_IRECACTIONPLAN_CTXT,
      lt_all_data type PPFSINPRRU.
data: lo_rp_rc type i.
DATA: lv_head_guid      TYPE crmt_object_guid.
DATA: adminh     TYPE REF TO cl_crm_ic_irecactionplan_cn02,
        guidstring TYPE string,
        guid       TYPE crmt_object_guid,
        action_obj   TYPE crmt_action_obj_tab,
        lv_object_id TYPE crmt_object_id.
   DATA: request_event TYPE REF TO cl_htmlb_event.
   DATA: event_data    TYPE REF TO if_htmlb_data.
   DATA: event_value type string.
    event_data = cl_htmlb_manager=>get_event_ex( request ).
    if event_data is bound.
      try.
          request_event ?= event_data.
        catch cx_sy_move_cast_error.
          clear request_event.
      endtry.
      event_value = event_data->event_id.
      translate event_value to lower case.             "#EC TRANSLANG
   endif.
   if event_value <> 'x1_x3_x17_x21_actionitems'.
      return.
   endif.
TRY.
create object lo_sfprint.
create object lo_trigger.
    lv_exist = 1.
Get the header GUID
    adminh = typed_context->btadminh.
    guidstring = adminh->get_actionitem( 'GUID' ).
    If guidstring is initial.
       return.
    endif.
    lv_head_guid = guidstring.
    CALL FUNCTION 'CRM_ORDERADM_H_READ_OW'
      EXPORTING
        iv_orderadm_h_guid     = lv_head_guid
      IMPORTING
        ev_object_id           = lv_object_id
      EXCEPTIONS
        admin_header_not_found = 1
        OTHERS                 = 2.
       CALL FUNCTION 'CRM_ACTION_GET_TOOLBAR_IL'
      EXPORTING
        iv_ref_guid     = lv_head_guid
        iv_ref_kind     = 'A'
      IMPORTING
        et_action_obj   = action_obj
        et_action_fld   = action_fld
      EXCEPTIONS
        parameter_error = 1
        error_occurred = 2
        error_message   = 3
        OTHERS          = 4.
    IF sy-subrc EQ 0.
      LOOP AT action_fld INTO wa_action where applkey = lv_object_id.
      ENDLOOP.
      IF sy-subrc EQ 0.
         ls_action_obj = wa_action-action.
         lv_exist = 0.
      ENDIF.
    ENDIF.
    if lv_exist is initial.
    CALL METHOD ls_action_obj->get_processing
     IMPORTING
       ei_processing = lr_medium.
    CALL METHOD lo_trigger->get_appl
      RECEIVING
        result = io_appl_object.
      call function 'CRM_ACTION_GET_APPL_OBJECT'
        exporting
          iv_ref_guid          = lv_head_guid
          iv_ref_kind          = 'A'
        IMPORTING
          EV_APPL_OBJECT       = io_appl_object.
    CALL METHOD lr_medium->execute
      EXPORTING
        io_appl_ref       = io_appl_object   "lo_appl_ref
      RECEIVING
        rp_status         = lp_proc_stat
      EXCEPTIONS
        missing_arguments = 1
        OTHERS            = 2.
ip_smart_form = lr_medium->get_smartform( ).
    ip_smart_form = 'ZIMPR_ORDEN_RASTREO'.
get the function name for this smart form
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname           = ip_smart_form
      IMPORTING
        fm_name            = function_name
      EXCEPTIONS
        no_form            = 1
        no_function_module = 2
        OTHERS             = 3.
determine the tables of the application
CALL FUNCTION 'CRM_OUTPUT_SINGLE_READ'
    EXPORTING
      iv_object                 = io_appl_object
      iv_smart_form             = ip_smart_form
      ir_partner                = io_partner
    IMPORTING
      es_output_orderadm_h      = ls_orderadm_h
      es_output_activity_h      = ls_activity_h
      es_output_lead_h          = ls_lead_h
      es_output_opport_h        = ls_opport_h
      es_output_orgman_h        = ls_orgman_h
      es_output_pricingdata_h   = ls_pricingdata_h
      es_output_sales_h         = ls_sales_h
      es_output_shipping_h      = ls_shipping_h
      et_output_partner_h       = lt_partner_h
      et_output_payplan_d_h     = lt_payplan_d_h
      es_output_customer_h      = ls_customer_h
      es_output_cumulat_h       = ls_cumulat_h
      et_output_billing_h       = lt_billing_h
      et_output_cancel_h        = lt_cancel_h
      et_output_appointment_h   = lt_appointment_h
      et_output_billplan_d_h    = lt_billplan_d_h
      et_output_billplan_h      = lt_billplan_h
      et_output_status_d_h      = lt_status_d_h
      et_output_status_h        = lt_status_h
      et_output_srv_subject_h   = lt_srv_subject_h
      et_output_srv_reason_h    = lt_srv_reason_h
      et_output_srv_result_h    = lt_srv_result_h
      es_output_acs_h           = ls_acs_h
      et_output_orderadm_i      = lt_orderadm_i
      et_output_orgman_i        = lt_orgman_i
      et_output_pricingdata_i   = lt_pricingdata_i
      et_output_pricing_i       = lt_pricing_i
      et_output_product_i       = lt_product_i
      et_output_sales_i         = lt_sales_i
      et_output_shipping_i      = lt_shipping_i
      et_output_schedlin_i      = lt_schedlin_i
      et_output_partner_i       = lt_partner_i
      et_item_cstics_i          = lt_item_cstics_i
      et_output_customer_i      = lt_customer_i
      et_output_billing_i       = lt_billing_i
      et_output_cancel_i        = lt_cancel_i
      et_output_finprod_i       = lt_finprod_i
      et_output_ordprp_i        = lt_ordprp_i
      et_output_appointment_i   = lt_appointment_i
      et_output_billplan_d_i    = lt_billplan_d_i
      et_output_billplan_i      = lt_billplan_i
      et_output_orderadm_i_qt   = lt_orderadm_i_qt
      et_output_orderadm_i_in   = lt_orderadm_i_in
      et_output_schedlin_i_cf   = lt_schedlin_i_cf
      et_output_status_i        = lt_status_i
      et_output_wrk_set_e_s_bbp = lt_working_set_e_s_bbp
      ev_language               = lv_language.
control_parameters-langu = sy-langu.
control_parameters-no_dialog = 'X'.
control_parameters-getotf    = 'X'.
call function to process smart form
CALL FUNCTION function_name
    EXPORTING
      archive_index        = is_archive_index
      archive_index_tab    = ct_archive_index_tab
      archive_parameters   = is_archive_parameters
      control_parameters   = control_parameters
      mail_appl_obj        = is_mail_appl_obj
      mail_recipient       = is_mail_recipient
      mail_sender          = is_mail_sender
      output_options       = ls_output_options
      user_settings        = ip_user_settings
      orderadm_h           = ls_orderadm_h
      activity_h           = ls_activity_h
      lead_h               = ls_lead_h
      opport_h             = ls_opport_h
      orgman_h             = ls_orgman_h
      partner_h            = lt_partner_h
      pricingdata_h        = ls_pricingdata_h
      sales_h              = ls_sales_h
      shipping_h           = ls_shipping_h
      payplan_d_h          = lt_payplan_d_h
      cumulat_h            = ls_cumulat_h
      customer_h           = ls_customer_h
      acs_h                = ls_acs_h
      billing_h            = lt_billing_h
      cancel_h             = lt_cancel_h
      appointment_h        = lt_appointment_h
      billplan_d_h         = lt_billplan_d_h
      billplan_h           = lt_billplan_h
      status_d_h           = lt_status_d_h
      status_h             = lt_status_h
      srv_subject_h        = lt_srv_subject_h
      srv_reason_h         = lt_srv_reason_h
      srv_result_h         = lt_srv_result_h
      orderadm_i           = lt_orderadm_i
      orderadm_i_qt        = lt_orderadm_i_qt
      orderadm_i_in        = lt_orderadm_i_in
      orgman_i             = lt_orgman_i
      pricingdata_i        = lt_pricingdata_i
      pricing_i            = lt_pricing_i
      product_i            = lt_product_i
      sales_i              = lt_sales_i
      schedlin_i           = lt_schedlin_i
      schedlin_i_cf        = lt_schedlin_i_cf
      shipping_i           = lt_shipping_i
      partner_i            = lt_partner_i
      item_cstics_i        = lt_item_cstics_i
      customer_i           = lt_customer_i
      billing_i            = lt_billing_i
      cancel_i             = lt_cancel_i
      finprod_i            = lt_finprod_i
      ordprp_i             = lt_ordprp_i
      appointment_i        = lt_appointment_i
      billplan_d_i         = lt_billplan_d_i
      billplan_i           = lt_billplan_i
      status_i             = lt_status_i
      working_set_e_s_bbp = lt_working_set_e_s_bbp
      language             = lv_language
    IMPORTING
      document_output_info = es_document_output_info
      job_output_info      = output_data
      job_output_options   = es_job_output_options
    EXCEPTIONS
      output_canceled      = 1
      parameter_error      = 2
      OTHERS               = 3.
    call function 'CONVERT_OTF'
      EXPORTING
        format                = 'PDF'
      IMPORTING
        bin_filesize          = l_pdf_len
        bin_file              = l_pdf_xstring
      TABLES
        OTF                   = OUTPUT_DATA-OTFDATA
        LINES                 = LT_LINES
      EXCEPTIONS
        err_max_linewidth     = 1
        err_format            = 2
        err_conv_not_possible = 3
        err_bad_otf           = 4
        others                = 5.
      IF SY-SUBRC = 0.
        DATA: lv_string TYPE string,
              lv_numguid(10) TYPE N.
        lv_string = lv_spoolid.
        lv_numguid = lv_object_id.
       CALL METHOD op_previewspool( iv_spoolid = lv_string ).
        me->op_previewspool( iv_spoolid     = lv_string
                             lv_pdf_xstring = l_pdf_xstring
                             lv_guid        = lv_numguid ).
      ENDIF.
    endif.
    CATCH cx_sy_move_cast_error.
ENDTRY.
ENDMETHOD.
<b>This part send the result to a new windows and refresh a main page, but thow a error 503 ...</b>
method OP_PREVIEWSPOOL .
*{   INSERT         CRDK902447                                        1
DATA: lv_url TYPE string.
DATA: cached_response TYPE REF TO if_http_response,
      new_navegator   TYPE REF TO CL_WB_NAVIGATOR_NEW_WINDOW,
      new_navigation   TYPE REF TO CL_BSP_NAVIGATION.
DATA: guid TYPE guid_32.
Resultado generado: Formato PDF
data: l_pdf_xstring type xstring,
        display_url    type string,
        pagina_url    type string,
        display_pag    type string,
        V_TARGET_URL   TYPE STRING,
        W_APP_NAME     TYPE STRING,
        l_pdf_len      type i.
DATA: out TYPE REF TO IF_BSP_WRITER,
        lv_out TYPE REF TO cl_BSP_WRITER,
        lv_context Type Ref to IF_BSP_PAGE_CONTEXT,
        lv_body type string,
        lv_body2 type string,
        lv_guidmem(10) type n,
        lv_doscmd(200),
        lv_pag   type xstring,
        lv_back(2) type n.
IF not lv_pdf_xstring is initial.
    CREATE OBJECT cached_response TYPE CL_HTTP_RESPONSE EXPORTING add_c_msg = 1.
    l_pdf_len = xstrlen( lv_pdf_xstring ).
    cached_response->set_data( data   = lv_pdf_xstring
                          length = l_pdf_len ).
    cached_response->set_header_field( name = if_http_header_fields=>content_type
                                       value = 'application/pdf' ).
     cached_response->set_header_field(
                        name = 'content-disposition'
                        value = 'attachment; filename = test.pdf' ).
    cached_response->set_status( code = 200 reason = 'OK' ).
    cached_response->server_cache_expire_rel( expires_rel = 180 ).
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        ev_guid_32 = guid.
DATA:
    LV_HOST     TYPE STRING,     "Host name
    LV_PORT     TYPE STRING,     "Port Number
    LV_LOCAL_URL     TYPE STRING,     "URL (Relative to the Current Server)
    LV_ABS_URL     TYPE STRING,     "URL (Absolute, incl. Protocol, Host, Port)
    LV_PROTOCOL     TYPE STRING,     "Available Protocol
    LV_servidor     TYPE STRING.     "Available Protocol
Construct the Target URL
      CALL METHOD RUNTIME->CONSTRUCT_BSP_URL
        EXPORTING
          IN_PROTOCOL       = 'http'
          IN_APPLICATION_NS = RUNTIME->APPLICATION_NAMESPACE
          IN_APPLICATION    = 'crm_ic'
          IN_PAGE           = '**/crm_ic'
        IMPORTING
          OUT_ABS_URL       = V_TARGET_URL
          OUT_HOST          = LV_HOST
          OUT_PORT          = LV_PORT
          OUT_LOCAL_URL     = LV_LOCAL_URL
          OUT_PROTOCOL      = LV_PROTOCOL.
        CONCATENATE 'crm_ic' '/**/' INTO W_APP_NAME.
      REPLACE W_APP_NAME IN V_TARGET_URL WITH SPACE.
    CONCATENATE V_TARGET_URL '/' guid '.pdf' INTO display_url.
    cl_http_server=>server_cache_upload( url      = display_url
                                         response = cached_response ).
    lv_url = adapter->if_bsp_page~get_page_url( ).
    if LV_PORT is initial.
       concatenate 'http://' LV_HOST lv_url+0(61) 'default.do' into lv_url.
    else.
       concatenate 'http://' LV_HOST ':' LV_PORT lv_url+0(61) 'default.do' into lv_url.
    endif.
      lv_body2 = '<html><head><script language=JavaScript>'.
      concatenate lv_body2 'window.open("' display_url '"); ' INTO lv_body2.
      concatenate lv_body2 ' location.href = "' lv_url '"; </script></head>' INTO lv_body2.
      concatenate lv_body2 '<body></body></html>' INTO lv_body2.
     concatenate lv_body2 ' function back(){ history.back( ); } </script></head>' INTO lv_body2.
     concatenate lv_body2 '<body><a href="javascript:back();">regresar</a></body></html>' INTO lv_body2.
      response->append_cdata( data = lv_body2 ) .
      response->set_header_field( name = 'content-type'
                                  value = 'text/html' ). "#EC NOTEXT
      response->set_header_field( name = 'cache-control' value = 'max-age=0' ). "#EC NOTEXT
     response->set_header_field( name = 'Expires' value = '0' ). "#EC NOTEXT
      navigation->response_complete( ).
return.
ENDIF.
endmethod.

Using the search bar, it seems it's a proxy issue, but finding a simple solution did not seem apparent. Have you tried a reboot? To reboot, hold the power and home buttons at the same time for at least 10 seconds (hold past the swipe to shut down bar, should it appear) until the Apple Logo appears, then let go fo both buttons and your iPad will restart. Hopefully, this will solve the problem......

Service Not Available error with SSAS cube

Hi,
We imported Microsoft Analysis Services (SSAS) Cube into RPD using XMLA. While using the drill down feature in BI answers using presentation hierarchies, OBIEE is generating the following error
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: URL: http://<server>/<app name>/msmdpump.dll. The http return status is 503.< html><head><title>Service Not Available</title></head><body>Service Not Available</body></html>
However, drill down feature is working fine with attribute columns. Also the report is working fine up to certain level of drill down. In the log it is evident that OBIEE is generating multiple physical queries (with clause) to pull the data from the cube.
Is there any limit on the size of the mdx or number of mdx queries that msmdpump.dll can process? Is there any configuration that needs to be modified while working with SSAS cubes?
OBIEE version: 11.1.1.6.2 BP1
Much appreciate your time.

Hi Dhar,
Thanks for your reply.
Yes, your observation is correct. Changing the type of the hierarchies has some effect on the issue. I'm able to drill down to few more levels as the MDX generated by OBIEE in this less complex. But ultimately I'm facing the same issue after certain stage. I can only think of, the number of physical queries generated by OBIEE, as one of the possible reason for this. What is your opinion?
Interestingly, I tested the same RPD in 11.1.1.6.5 and I'm unable to reproduce in the issue so far in my testing . Is it a bug in 11.1.1.6.2?! However, upgrading to 11.1.1.6.5 is not an option for us at this stage.
Were you able to resolve the issue completely by only changing the hierarchy type? What version you have used in you project?
Thanks.

Cron service not available error

A production issue appeared today at one of our customer
sites.... and I am unable to login to CFadmin. I stop and restart
the services, but still the same issue appears. See below.
Anyone have any thoughts? Ideas? Has anyone ever seen this
before??
Error Occurred While Processing Request
The Cron service is not available.
This exception is usually caused by service startup failure.
Please check your server configuration.
The error occurred in Application.cfm: line 78
-1 : Unable to display error's location in a CFML template.
Please try the following:
Check the ColdFusion documentation to verify that you are
using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2;
SV1; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
Date/Time 25-Apr-06 12:57 PM
Stack Trace (click to expand)
at
cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
coldfusion.server.ServiceFactory$ServiceNotAvailableException:
The Cron service is not available.
at
coldfusion.server.ServiceFactory.getCronService(ServiceFactory.java:118)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown
Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at
coldfusion.runtime.java.JavaProxy.invoke(JavaProxy.java:74)
at coldfusion.runtime.CfJspPage._invoke(CfJspPage.java:1627)
at
cfApplication2ecfm105811000.runPage(C:\blackstone_final\cfusion\wwwroot\CFIDE\administrat or\Application.cfm:78)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at
coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:343)
at
coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at
coldfusion.filter.CfincludeFilter.include(CfincludeFilter.java:33)
at
coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:157)
at
coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at
coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:50)
at
coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52)
at
coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at
coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at
coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at
coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.CfmServlet.service(CfmServlet.java:105)
at
coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:349)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:457)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:295)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

I'm receiving the exact same error as the original post. We tried every suggestion on this forum and still get the 'cron service not available' error. I've also checked and we don't have a neo-cron.xml file. We are using Coldfusion 8.
The Cron service is not available.
This exception is usually caused by service startup failure. Check your server configuration.
The error occurred in Application.cfm: line 84
Called from Application.cfm: line 4
Called from Application.cfm: line 1
-1: Unable to display error's location in a CFML template.
Any help will be appreciated. Thanks.
Crystal

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

I have one pc with service not available"sapdp00"

In my 8 year career I never had problem using "services" file in "c:\windows\service32\drivers\etc".
However there is an XP machine (with regular connection to network) with problem "service not available"sapdp00". It is like this settings come from somewhere else. I tried with search for "services" butunsuccessfully
The "service" file is copied from my XP machine where everything is functionning in same network. How could I trace where the problem is?

there are known viruses or applications that changes the services file path. MS-Messenger 7.50 did that in the past.
check if SAP not 882741 applied to you.
if not, copy the services file from another PC and see if this helps.

CIMC on C210 server throws Error 2001: Service not available message

I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available" message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
Thanks in advance!
Jess

I got it working on one of the servers, and havent tried the same solutions on any other server.
What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
I'm not sure if it will work on the rest of the servers, but it's worth a try
Regards
Alex

In App Purchase showing "Service Not available" Message box with error code 805a01f4

Hi all ,
I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
in a bit . This error code may be helpful : 805a01f4 ."
Please tell me how to resolve .
Thank you

Thanks for your response .
I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After few seconds got a message on my number that "Dear customer,
thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ?

Service not available"sapdp00".

In my 8 year career I never had problem using "services" file in "c:\windows\service32\drivers\etc".
However there is an XP machine (with regular connection to network) with problem "service not available"sapdp00". It is like this settings come from somewhere else. I tried with search for "services" butunsuccessfully
The "service" file is copied from my XP machine where everything is functionning in same network. How could I trace where the problem is?

Hello,
Could you explain your problem once again ?
Do you try to connect with sapgui from this XP machine to a SAP system which system number is 00 ?
Is there really a "services" file on the XP machine ?
If yes, is the line
sapdp00 3200/tcp
present in the file ?
Regards,
Olivier

VPN service not available or not responding - Please help!!

For years, I was using VPN AnyConnect without much of a problem. I have an older Gateway 500XL Desktop PC that has functioned well for me since 2004. I have only had to replace the hard drive once. I did upgrade the memory from 512MB to 2 GB recently. I was using Verizon FIOS for my internet connection but recently moved and am now using Cox Communications High Speed service which is doing 5MB per second on the download side. Shortly after the move, I began to develop connection problems with my VPN. I would get the 'service not available' or 'VPN not responding' messages. If I tried to uninstall and then reinstall, the VPN would work again BUT once I disconnected, I would get the above referenced messages again if I tried to reconnect. So I would unistall and reinstall every time in order for it to work and then just leave it running all day rather than disconnect. This all started happeing in Oct. and then more recently, it would magically start reconnecting again without me having to reinstall it so I was happy the problem seemed to go away. However, now, within the past week, I could not get it to work at all, even after reinstalling! So, I am completely out of options. I need to have this up and running again very soon for work reasons.
Since Oct., I have tried multiple things. Initially, the router that Cox gave me was bad after the guy installed it incorrectly (without me realizing it) and it became faulty. Got a new router, but that did not change the VPN problem. I have McAfree Anti-Virus. I tried uninstalling it to see if it was conflicting somewhere but that changed nothing for the VPN. I downloaded malwarebytes and ran scans with that and McAfree full scans but did not have any malware or problems on the PC. I tried to check the PC disk for errors and came up empty there. Cleaned out caches and all that with no change. When I look at the network connections panel on my PC, I can see the AnyConnect link is set up but it will say 'disabled'. When I try to 'enable' it, it will not allow it (a message window pops up but I forget what it says). WHY? I think this is the problem. Is there something corrupted with my PC's ability to establish network connections? Is this something that can be fixed? I know the PC is older and XP will not be supported any longer but none of this make sense. If I could previously connect after installing but ONLY the first time connecting, something is happening to break the network connection on my PC but I have no idea. I tried using the windows network connections troubleshooting tool but came up empty there.

For years, I was using VPN AnyConnect without much of a problem. I have an older Gateway 500XL Desktop PC that has functioned well for me since 2004. I have only had to replace the hard drive once. I did upgrade the memory from 512MB to 2 GB recently. I was using Verizon FIOS for my internet connection but recently moved and am now using Cox Communications High Speed service which is doing 5MB per second on the download side. Shortly after the move, I began to develop connection problems with my VPN. I would get the 'service not available' or 'VPN not responding' messages. If I tried to uninstall and then reinstall, the VPN would work again BUT once I disconnected, I would get the above referenced messages again if I tried to reconnect. So I would unistall and reinstall every time in order for it to work and then just leave it running all day rather than disconnect. This all started happeing in Oct. and then more recently, it would magically start reconnecting again without me having to reinstall it so I was happy the problem seemed to go away. However, now, within the past week, I could not get it to work at all, even after reinstalling! So, I am completely out of options. I need to have this up and running again very soon for work reasons.
Since Oct., I have tried multiple things. Initially, the router that Cox gave me was bad after the guy installed it incorrectly (without me realizing it) and it became faulty. Got a new router, but that did not change the VPN problem. I have McAfree Anti-Virus. I tried uninstalling it to see if it was conflicting somewhere but that changed nothing for the VPN. I downloaded malwarebytes and ran scans with that and McAfree full scans but did not have any malware or problems on the PC. I tried to check the PC disk for errors and came up empty there. Cleaned out caches and all that with no change. When I look at the network connections panel on my PC, I can see the AnyConnect link is set up but it will say 'disabled'. When I try to 'enable' it, it will not allow it (a message window pops up but I forget what it says). WHY? I think this is the problem. Is there something corrupted with my PC's ability to establish network connections? Is this something that can be fixed? I know the PC is older and XP will not be supported any longer but none of this make sense. If I could previously connect after installing but ONLY the first time connecting, something is happening to break the network connection on my PC but I have no idea. I tried using the windows network connections troubleshooting tool but came up empty there.

503 Service not available error while testing web service in SOAMANAGER

Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
Prince

Hi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi.

"Runtime update not available" when installing AIR on XP

[2011-04-09:10:54:04] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-09:10:54:04] Commandline is:
[2011-04-09:10:54:04] No installed runtime detected
[2011-04-09:10:54:06] Starting runtime install. Installing runtime version 2.6.0.19120
[2011-04-09:10:54:06] Installing msi at c:\docume~1\myusername\locals~1\temp\air109.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-09:10:54:10] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2011-04-09:10:54:10] Runtime Installer end with exit code 0
[2011-04-09:10:54:11] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-09:10:54:11] Commandline is: -installupdatecheck
[2011-04-09:10:54:11] Installed runtime (2.6.0.19120) located at c:\Program Files\Common Files\Adobe AIR
[2011-04-09:10:54:12] Performing pingback request
[2011-04-09:10:54:12] Pingback request completed with HTTP status 200
[2011-04-09:10:54:12] Starting runtime background update check
[2011-04-09:10:54:12] Begin Background update download from http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.6.0.19120/update
[2011-04-09:10:54:12] Unpackaging http://airdownload.adobe.com/air/3/background/windows5.1/x86/patch/2.6.0.19120/update to C:\Documents and Settings\conlinc\Application Data\Adobe\AIR\Updater\Background
[2011-04-09:10:54:12] Runtime update not available
[2011-04-09:10:54:12] Unpackaging cancelled
[2011-04-09:10:54:12] Runtime Installer end with exit code 0

Thanks for your help. I ran the steps you suggested, but still could not get
the installer that uses AIR to run (it failed silently). Could this be related
to the fact that I'm trying to install this on a work laptop? (I don't have
administrator privileges on the machine, or it may be locked down in some other
way.)
Below is the log of what I tried:
C:\Downloads>AdobeAIRInstaller.exe -info
C:\Downloads>This is an installer for Adobe AIR 2.6.0.19120
Adobe AIR 2.6.0.19120 is installed.
Scheduled install type: patchSame
Note: this never returned to the command prompt, so I killed it with Ctrl+C
C:\Downloads>AdobeAIRInstaller.exe -uninstall
C:\Downloads>Uninstalling Adobe AIR(all versions)
AdobeAIRInstaller.exe -uninstalldone
Note: this never returned to the command prompt, so I killed it with Ctrl+C
C:\Downloads>AdobeAIRInstaller.exe -silent
C:\Downloads>Adobe AIR is currently not installed
Installing version 2.6.0.19120
done
Note: this never returned to the command prompt, so I killed it with Ctrl+C

Mac mini bluetooth not available after updrading to OSX 10.8

The bluetooth module is not available after upgrading to OSX 10.8 on a mac mini late 2009, anyone with this issue?
Message was edited by: Magnusum

I have an issue where I get Bluetooth mouse/keyboard at the login screen, but once it goes to the desktop they are both dead. This only happens when I have my Drobos plugged up via FireWire. If I boot without those devices plugged in, it works.
Anything like that for you?

Itunes will not install..windows INSTALLER service not available.windows 7

I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
Message was edited by: ehindahl

Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
(Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)

Runtime Service not Available after Copy

Similar Messages

Maybe you are looking for