RV180 PPPoE Enable Failed
Hi,
I am connecting the RV180 to a Huawei Echolife HG850a ONT via PPPoE, dynamic IP address from ISP.
However, error message shows:
Fri Apr 19 02:54:15 2013(UTC) [rv180][System][NONE] pppoeMultipleEnableDisable: pppoe enable failed
Fri Apr 19 02:55:16 2013(UTC) [rv180][System][NONE] pppoeMultipleEnableDisable: pppoe enable failed
I am not able to get the RV180 to logon via PPPoE and get its dynamic IP.
Firmware is version 1.0.2.6,
tried resetting to factory defaults, still the same.
thanks.
Let me explain a bit more about my case here.
My ISP is Telekom Malaysia and Service is Unifi - Fiber-To-The-Home (FTTH).
The service is "terminated" by a Huawei HG850A Optical Network Terminator (ONT).
The ONT then needs to be connected to a 802.1Q VLAN capable PPPoE router to split VLAN ports 500 and 600. 500 for Internet stream and 600 for IPTV stream.
Our ISP provides us with a dlink DIR-615 router that will work fine with the above setup.
But that Dlink DIR615 is not enough as I would like to connect to other site offices with cisco VPN, namely using Cisco RV042, RV082.
So I need to know what is wrong with the RV180 or is it a problem with my configuration.
Other people from malaysia have been configuring their other routers with no problem as below:
http://klseet.com/index.php/tl-wr1043nd-ver18/setup-for-unifi-10031-rc6
http://klseet.com/index.php/setup-walk-through/setup-for-unifi
thank you
Similar Messages
-
Solaris network boot - a20 enable failed
i am trying to install solaris 10 x64 on a HP proliant blade HP bl45p.
It only supports PXE boot and for that i have setup a PXE server that assigns a DHCP address to my blade. The blade gets the IP and start to net boot but fails giving error
A20 enable failed
<hangs here>
looks like there is a patch to solve this problem butnot sure how to put that patch to my cd image on the PXE server.
any views on this??Which version of Solaris x86 are you installing? This isn't the GRUB based
S10 1/2006 release, correct?
I guess that HP proliant blade HP bl45p doesn't have a PS/2 keyboard controller
any more (legacy free pc), and fails for a similar reason that GRUB doesn't start
on Intel iMacs: the boot code tries to use the non-existant keyboard controller to
toggle the gate A20, and fails:
http://www.opensolaris.org/jive/message.jspa?messageID=31818#31818
OTOH, I do see a bug report filed against the old boostrap loader boot.bin
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6230381
and this appears to be fixed in S10 1/2006 . If you haven't tried S10 1/2006...
it might work better on this HP blade hardware.
BTW, you probably have to use a serial console, otherwise it will hang once
again in multiboot, when no i8042 ps/2 keyboard controller is present:
http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6412226 -
"Enable Failed" Error Is Issued When Using a Workflow - OAM 10.1.4.3
Hello,
We've set up password management according to http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12489/idconfig.htm#CBDGGGHE and note 444094.1. We're trying to create a user through IdentityXML using the create user basic workflow we created, but that fails. So we tried to create a user in Identity Manager through the Create User Identity link. We receive: Initiate - Completed, Enable - Failed. We see http://download.oracle.com/docs/cd/E12530_01/oam.1014/b32419/trblsht.htm#BABBAEAH statement about the searchbase, but it looks correct with our domain and anyone allowed. Anyone have any other ideas what could be wrong, or a way to troubleshoot this?
Thanks for your helpThanks for the pointer to the identity logs. I recreated the workflow and it seems to work now, I guess something was goofed up. Although, if I create a new user through the workflow, the new user is missing the oblixPersonPwdPolicy. When we set this up, there was a step to tie the oblixPersonPwdPolicy object class to the employee tab. Would you know why the class isn't being added?
-
% waas enable failed: WAAS memory requirements not met
Dear Team,
We have upgraded our WAAS devices to 5.0.1 and upgraded the brach router that having waas express license to 15.2 3 T. Now we are getting following error while we are enabling the waas from WAN interface.
% waas enable failed: WAAS memory requirements not met.
before upgrading the branch router itsWAAS working fine and we are facing this issue after upgrading the router from 15.1 to 15.2.
Branch router Model: 1941.
Kindly suggest why we are getting these error while we are enabling the WAAS in Wan interface.
Please find the below mentioned show version output from branch router.
BRouter#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 23-Mar-12 15:35 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)
HB2503R0 uptime is 4 hours, 50 minutes
System returned to ROM by reload at 17:25:07 IST Sat Sep 22 2012
System restarted at 17:26:42 IST Sat Sep 22 2012
System image file is "flash:c1900-universalk9-mz.SPA.152-3.T.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO1941/K9 (revision 1.0) with 2269152K/90112K bytes of memory.
Processor board ID FGL1549221B
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Embedded service engine(s)
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
Device# PID SN
*0 CISCO1941/K9 FGL1549221B
Technology Package License Information for Module:'c1900'
Technology Technology-package Technology-package
Current Type Next reboot
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
data None None None
Configuration register is 0x2102
Brouter#
Brouter#sh flash
-#- --length-- -----date/time------ path
1 55398712 Nov 29 2011 20:37:04 +05:30 c1900-universalk9-mz.SPA.151-4.M2.bin
2 2903 Nov 29 2011 20:58:52 +05:30 cpconfig-19xx.cfg
3 3000320 Nov 29 2011 20:59:06 +05:30 cpexpress.tar
4 1038 Nov 29 2011 20:59:16 +05:30 home.shtml
5 122880 Nov 29 2011 20:59:24 +05:30 home.tar
6 1697952 Nov 29 2011 20:59:38 +05:30 securedesktop-ios-3.1.1.45-k9.pkg
7 415956 Nov 29 2011 20:59:52 +05:30 sslclient-win-1.1.4.176.pkg
8 66415436 Sep 22 2012 17:24:06 +05:30 c1900-universalk9-mz.SPA.152-3.T.bin
129417216 bytes available (127070208 bytes used)
Brouter#sh hardware
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTW
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Fri 23-Mar-12 15:35 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)
Brouter uptime is 4 hours, 51 minutes
System returned to ROM by reload at 17:25:07 IST Sat Sep 22 2012
System restarted at 17:26:42 IST Sat Sep 22 2012
System image file is "flash:c1900-universalk9-mz.SPA.152-3.T.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
Cisco CISCO1941/K9 (revision 1.0) with 2269152K/90112K bytes of memory.
Processor board ID FGL1549221B
2 Gigabit Ethernet interfaces
2 Serial(sync/async) interfaces
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Embedded service engine(s)
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
We are geeting the "SSL hand shake failed while communicating with WAAS express device " critical warning from Central manger GUI for the same branch express. Kindly suggest how we can resplve this issue.
Thamks in Advance.
Regards.
RanjithHi Ranjith,
Can you try the following commands on your router and see if it helps:
configmemory-size iomem 5
If it doesn't and that you are sure you have enough memory on your router to support WAAS Express, I would advise you to open a TAC case to have this investigated in depth.
Regards,
Nicolas -
Pppoe connection failed. no route to host
Hi.
I'm using airport express for my wifi setup. I'm connected with no problems. The built in ethernet is NOT connected and has an idle status.
Every now and then, (I'm not sure what triggers it), I would get a popup window saying "PPPoE connection failed. No route to host."
Note that this would popup even though I am already currently surfing the net and the airport wifi connection is NOT dropped or reset.
I suspect that this is being triggered by the built in ethernet. Before I switched over to the airport express, I've never encountered this popup.
Is there some setting I need to configure so that I no longer get this false error message?
thanksHi.
I'm using airport express for my wifi setup. I'm connected with no problems. The built in ethernet is NOT connected and has an idle status.
Every now and then, (I'm not sure what triggers it), I would get a popup window saying "PPPoE connection failed. No route to host."
Note that this would popup even though I am already currently surfing the net and the airport wifi connection is NOT dropped or reset.
I suspect that this is being triggered by the built in ethernet. Before I switched over to the airport express, I've never encountered this popup.
Is there some setting I need to configure so that I no longer get this false error message?
thanks -
Similar to https://social.technet.microsoft.com/Forums/systemcenter/en-US/487234f4-9748-4f49-ab7b-ce523da4c500/publish-cloud-service-fails-from-visual-studio-2013-update-4-published-asset-entry-for-image but since the given answer provides no solution
and I found more details, I felt that opening this new question providing more details was necessary.
I have an existing Azure service with two web roles (service and worker) published first in May 2012. Recently I tried to update from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD
and in doing so, of course directly move to the new diagnostics version. So before publishing I enabled WAD diagnostics logging in the properties of both roles.
Trying to publish from Visual Studio to the exisiting Azure Service fails, VS output shows the following lines:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
What's working 1: For testing purposes, I have created a new Azure service in the Azure portal.
Publishing the same solution from the same development environment to this new service is possible without problems - the service with WAD diagnostics logging is working fine. Unfortunately this is no solution to my production service, with
DNS alias and SSL certificates bound to the existing Azure service.
What's working 2: Publishing the solution to the existing Azure service WITHOUT diagnositics enabled works.
Problem with that: Trying to activate WAD diagnostics logging after publishing using the Azure cmdlets also fails WiTH a similar error message. Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx I
tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced by a new deployment, so I compared both services using Azure cmdlet Get-AzureService.
I found that the new service has properties which the old one is missing:
ExtendedProperties : {[ResourceGroup, myazureservice], [ResourceLocation, North Europe]}
Is this a hint? Reinstalling or repairing Visual Studio is not the answer to this problem!!!
What's the meaning of "Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml"?
[Perhaps MS will publish a newer version of its Azure cmdlets, but that's not today's story]
So what are possible reasons or fixes for this behaviour? Going back to log4net is not my favorite. Even worse, while there are alternative logging solution,
I currently have no performance counter monitoring in the Azure portal (Remote desktop and perfmon is NO solution). Is there any alternative to going back to SDK2.4?
Best regards,
AndreasHi Andreas,
Thanks for your feedback.
I will test and reproduce your issue on my side. Any information, I will post back for you.
Thanks for your understanding.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
RADIUS from Aironet 1231 - enable fails
Hi all,
we have an ACS server (3.3)
which we use for Login and Enable authentication for all our routers & switches without any problems.
I am setting up an Aironet 1231G with IOS 12.3(7)JA
I am able to get the login to authenticate OK, but when you try to enable, it returns "REJECTED".
the ACS Failed Attempts.csv shows the following:
06/09/2005 15:59:00 Authen failed $enab15$ .. .. External DB auth failed .. .. 0 10.139.251.201
Can anyone please tell me what I'm doing wrong?
Aironet Startup-config is attached
Many Thanks.Thanks for the response, but Tacacs didn't work either.
We eventually figured it out.. we'd missed off the
aaa authentication enable default group radius enable
command.
added this and all was well.
Cheers,
Nick -
Hi,
My RV180 does not route properly between LAN and WAN through my PPPoE account. I am able to ping public IPs directly from the RV180 (through the diagnose section) but can not do it from any PC on LAN. The exact same configuration works perfectly well with a Linksys WTR610N. I upgraded formware from 1.0.0.30 to 1.0.1.9 but that did not make any difference.
The only time the RV180 will route is right after I reset to factory defaults and re-enter PPPoE account name and password. If I then reset my modem or the RV180, the RV180 does not route anymore between WAN and LAN even after several minutes and even though I can ping public IPs from the RV180.Here is the WTR610N's routing table with the same PPPoE user name and password:
Destination LAN IP
Subnet Mask
Gateway
Hop Count
Interface
10.0.0.1
255.255.255.255
0.0.0.0
1
Internet (WAN)
192.168.1.0
255.255.255.0
0.0.0.0
1
LAN & Wireless
0.0.0.0
0.0.0.0
10.0.0.1
1
Internet (WAN) -
oracle10G RAC is installed on centos5.5.the nodes all is normal. but db2 was abnormal after db2 rebooted.
db1:crs_stat -t
Name Type Target State Host
ora....E1.inst application ONLINE ONLINE db1
ora....E2.inst application ONLINE OFFLINE
ora....TEDB.db application ONLINE ONLINE db1
ora....SM1.asm application ONLINE ONLINE db1
ora....B1.lsnr application ONLINE ONLINE db1
ora.db1.gsd application ONLINE ONLINE db1
ora.db1.ons application ONLINE ONLINE db1
ora.db1.vip application ONLINE ONLINE db1
ora....SM2.asm application ONLINE OFFLINE
ora....B2.lsnr application ONLINE OFFLINE
ora.db2.gsd application ONLINE OFFLINE
ora.db2.ons application ONLINE OFFLINE
ora.db2.vip application ONLINE ONLINE db1
tail -50 /var/log/oracleasm and show messages:
Scanning system for ASM disks...
Disk "VOL1" does not exist or is not instantiated
Instantiating disk "VOL1"
oracleasm-instantiate-disk: Unable to open manager: No such device or address
Unable to instantiate disk "VOL1"
Disk "VOL2" does not exist or is not instantiated
Instantiating disk "VOL2"
Loading module "oracleasm": failed
db2:crs_stat -t and showmessages:
Name Type Target State Host
ora....E1.inst application ONLINE ONLINE db1
ora....E2.inst application ONLINE OFFLINE db2
ora....TEDB.db application ONLINE ONLINE db1
ora....SM1.asm application ONLINE ONLINE db1
ora....B1.lsnr application ONLINE ONLINE db1
ora.db1.gsd application ONLINE ONLINE db1
ora.db1.ons application ONLINE ONLINE db1
ora.db1.vip application ONLINE ONLINE db1
ora....SM2.asm application ONLINE ONLINE db2
ora....B2.lsnr application ONLINE ONLINE db2
ora.db2.gsd application ONLINE ONLINE db2
ora.db2.ons application ONLINE ONLINE db2
ora.db2.vip application ONLINE ONLINE db1
but /etc/init.d/oracleasm listdisks and show nothing.
/etc/init.d/oracleasm enable and show messages:Initializing the Oracle ASMLib driver: [FAILED]
start instance db2 and show messages:
PRKP-1001:Error starting instance db2 on node gdb2
CRS-0215:could not start resource 'ora.db.db2.inst'
[root@DB2 ~]# ls -l /dev/raw
total 0
crw-r--r-- 1 oracle oinstall 162, 1 Oct 14 22:29 raw1
crw-r--r-- 1 oracle oinstall 162, 2 Oct 14 22:29 raw2
crw-r--r-- 1 oracle oinstall 162, 3 Oct 14 22:29 raw3
Can anyone point me in the right direction.
Any help would be greatly appreciated.
Edited by: 868121 on 2011-10-14 下午5:50how u resolved it. can u please eloborate ? i am facing the same problem for instance on node1 on sun solaris having 10grac.
thanks in advance -
I couldn’t connect to my ISP with PPPoE, below is the log of connection attempts. Is there any solution of this problem?
Here is a portion of log during connection attemts
All Log
Type:
Jan 1 03:05:00 - Plugin pppoe loaded.
Jan 1 03:05:00 - PPPoE Plugin Initialized
Jan 1 03:05:00 - Plugin pppoe called.
Jan 1 03:05:00 - pppd 2.4.1 started by root, uid 0
Jan 1 03:05:00 - Sending PADI
Jan 1 03:05:00 - HOST_UNIQ successful match
Jan 1 03:05:00 - HOST_UNIQ successful match
Jan 1 03:05:00 - Unexpected packet: Ether addr: 00:30:88:1c:48:5b (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:05:00 - HOST_UNIQ successful match
Jan 1 03:05:00 - Unexpected packet: Ether addr: 00:30:88:1c:47:df (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:05:00 - HOST_UNIQ successful match
Jan 1 03:05:00 - Unexpected packet: Ether addr: 00:30:88:1c:47:dc (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:05:00 - HOST_UNIQ successful match
Jan 1 03:05:00 - Unexpected packet: Ether addr: 00:30:88:16:de:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:05:00 - HOST_UNIQ successful match
Jan 1 03:05:00 - Unexpected packet: Ether addr: 00:30:88:16:de:95 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:05:00 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x42618
Jan 1 03:05:00 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 03:05:00 - Doing disconnect
Jan 1 03:05:00 - Exit.
Jan 1 03:05:20 - Plugin pppoe loaded.
Jan 1 03:05:20 - PPPoE Plugin Initialized
Jan 1 03:05:20 - Plugin pppoe called.
Jan 1 03:05:20 - pppd 2.4.1 started by root, uid 0
Jan 1 03:05:20 - Sending PADI
Jan 1 03:05:40 - Plugin pppoe loaded.
Jan 1 03:05:40 - PPPoE Plugin Initialized
Jan 1 03:05:40 - Plugin pppoe called.
Jan 1 03:05:40 - pppd 2.4.1 started by root, uid 0
Jan 1 03:05:40 - Sending PADI
Jan 1 03:06:00 - Plugin pppoe loaded.
Jan 1 03:06:00 - PPPoE Plugin Initialized
Jan 1 03:06:00 - Plugin pppoe called.
Jan 1 03:06:00 - pppd 2.4.1 started by root, uid 0
Jan 1 03:06:00 - Sending PADI
Jan 1 03:06:20 - Plugin pppoe loaded.
Jan 1 03:06:20 - PPPoE Plugin Initialized
Jan 1 03:06:20 - Plugin pppoe called.
Jan 1 03:06:20 - pppd 2.4.1 started by root, uid 0
Jan 1 03:06:20 - Sending PADI
Jan 1 03:06:22 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x42618
Jan 1 03:06:22 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 03:06:22 - Doing disconnect
Jan 1 03:06:22 - Exit.
Jan 1 03:06:40 - Plugin pppoe loaded.
Jan 1 03:06:40 - PPPoE Plugin Initialized
Jan 1 03:06:40 - Plugin pppoe called.
Jan 1 03:06:40 - pppd 2.4.1 started by root, uid 0
Jan 1 03:06:40 - Sending PADI
Jan 1 03:06:42 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x42618
Jan 1 03:06:42 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 03:06:42 - Doing disconnect
Jan 1 03:06:42 - Exit.
Jan 1 03:07:00 - Plugin pppoe loaded.
Jan 1 03:07:00 - PPPoE Plugin Initialized
Jan 1 03:07:00 - Plugin pppoe called.
Jan 1 03:07:00 - pppd 2.4.1 started by root, uid 0
Jan 1 03:07:00 - Sending PADI
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - Unexpected packet: Ether addr: 00:30:88:16:de:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - Unexpected packet: Ether addr: 00:30:88:16:de:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - Unexpected packet: Ether addr: 00:30:88:16:de:95 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - Unexpected packet: Ether addr: 00:30:88:1a:29:9b (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:00 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:16:de:95 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:1a:29:9b (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:1a:29:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:1c:48:3b (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x42618
Jan 1 03:07:01 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 03:07:01 - Doing disconnect
Jan 1 03:07:01 - Exit.
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:1a:29:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:1c:48:3b (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:16:de:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x42618
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Couldn't get channel number: Transport endpoint is not connected
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:16:de:95 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - Doing disconnect
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:16:de:98 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Exit.
Jan 1 03:07:01 - HOST_UNIQ successful match
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:1a:29:9b (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) da
Jan 1 03:07:01 - Unexpected packet: Ether addr: 00:30:88:16:de:95 (PPPOE Discovery) PPPoE hdr: ver=0x1 type=0x1 code=0x07 sid=0x0000 length=0x001b (PADO) PPPoE tag: type=0103 length=0004 (Host Uniq) data (bin): 18 26 04 00 PPPoE tag: type=0102 length=000b (AC Name) daHello,
Sometimes modems refuse the connection to routers. If they will connect to another device, such as a PC, then you can clone the MAC of that PC to the router to trick the modem into 'thinking' that the PC is connecting. This is usually done on a DHCP connection, although I have seen it work with PPPoE as well.
You should never see any issue with the PC and router having the same MAC because they are on completely different networks. The router is on the ISP network (WAN) and the PC is on the LAN network of the router. We use this trick all the time when we can't get a modem to play nice with a router. If there was danger of conflict the functionality would not be in every consumer and SMB router available. (That I am aware of) I will not guarantee that it will work but it is certainly worth a try.
I have seen cases where a certain brand/model of modem will not under any circumstances work with the router. In that case you can either replace the modem or replace the router.
- Marty -
Notes Enable fails with Active Sync
We are using the Sun IdM 6.0. we using the oracle database table as a authoritative source.we have configured the Active sync to keep polling for any change in the "status" attribute in database table.
With the status attribute "0", it disables user on Lotus notes (resource).Which in turn passing the DenyGroups account attribute(access expire) to the resource.This is working sucessfully.
But when we trying to Enable back that user i.e when the status attribute is "1" we could not able to enable that user.Are they using the same user account?
If so how many IPads using the same user account. Might be throttling policy -
Hello,
Ive checked the forums ect, and it says this error is returned when there is an invalid user name or password (in the routers settings), but i confirmed with my ISP, that the user name and password i entered into the router's setting is correct, what could be the problem?
*I am using DSL,
*I have the Wireless-g broadband router, WRT54G v.7
Thanks in advance for you help!Okay in this case reset the router back to factory default settings, hold the reset button about 30 seconds and release it…power down the router about a minute and power it back on, logon to router’s setup page and click on “status” tab and check the IP address, if you are getting 192.168.1.x IP address, click on “setup” tab and change the LAN IP to 10.10.10.1 and save the settings, power cycle the n/w by unplugging power cable of modem, router and pc…power up the modem first, once modem is rebooted power up the router and then pc, check whether it works or not and let me know…
-
SA520W Optional WAN Port PPPoe fails to connect
Hello,
I am trying to connect a SA520W optional/secondary port to the Inet. ANd it always gives me this error:
pppoeMgmtDBUpdateHandler: error in executing database update handler
Component: PLATFORM
AND
pppoeMgmtTblHandler: pppoe enable failed
Component: PLATFORM
I have no idea how to resolve this.
Updated to actual firmware - same result.
Help is highly appreciated.
BenHi Ben, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. I apologize for your inconvenience you are having Ben, just to make sure you are running the last firmware it is 2.2.0.7, you can download it in the link bellow.
http://software.cisco.com/download/release.html?mdfid=282414018&softwareid=282728525&release=2.1.71
I advise you to perform a factory reset, set the time correctly. Then create the PPPoE profile and apply it to the WAN port again. After you have established the connection, please continue with the rest of the configuration, if the issue continue please contact your Internet Service Provider to troubleshoot your modem or verify the necessary information.I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer. -
Hi I am just trying to setup an RV220w on a FTTC BT Openreach modem and am finding that the router will not establish a connection.
In the logs I have seen the following:
Sat Jan 1 00:06:21 2000(GMT) [rv220w][System][PLATFORM] pppoeMgmtTblHandler: pppoe enable failed
Sat Jan 1 00:06:21 2000(GMT) [rv220w][System][PLATFORM] pppoeMgmtDBUpdateHandler: error in executing database update handler
I have seen some issues that people are having with the 1.0.1.0 firmware, in particular PPPoE issues. I note the router came preinstalled with 1.0.1.0 so have downgraded to 1.0.0.26.
I have removed the settings and tried again, but receive the same error message above.
The PPPoE settings are as follows:
username: [******]@[**********].[***]
password: [******************]
Authentication Type: Auto-Negotiate
At a bit of a loss what is going on ? I have tried resetting it to factory defaults on firmware 1.0.0.26 and entered the details again, but have the same error.
Has anyone else had success on this, I have other PPPoE devices that work absolutely no problems?Have you tried installing the Visual C++ Redistributable 2005? On 64-bit machines install both the 32-bit and 64-bit versions.
-
Hi I've had this setup working for 6 months with an Orange Siemens SE572 adsl modem set to PPPOE Passthrough and the RV120w using pppoe to connect the ADSL
But 3 days ago it stopped working nothing has changed on either device.
Here are the logs can anyone help me out??
[router][System][NIMF] nimfAdvOptSetWrap: NIMF table is NimfTrigger
[router][System][PLATFORM] pppoeMgmtTblHandler: pppoe enable failed
[router][System][PLATFORM] pppoeMgmtDBUpdateHandler: error in executing database update handler
[router][System][NIMF] nimfAdvOptSetWrap: NIMF table is NimfTrigger
I have factory reset the rv120w and redone the config but still get this error.
ThanksIt would be a good idea for you to place a call to our Cisco Small Busiiness Support Center and open up a case for
this issue that youare having. The number is 1-866-606-1866.
THANKS
Maybe you are looking for
-
I lost my install disk for my HP Deskjet 1051 print, scan, copy.
My main computer crashed and I am trying to install my HP Deskjet 1051 Printer to my laptop which is run on Windows XP. I no longer have my installation disk and was wondering what I could do to install it now?
-
Upgraded my 27" iMac (4 GB memore/3.2 GHz Intel Core i3) to Lion 10.7 and now it won't keep a connection to my wireless. I've had to shift over to working on my MacBook Pro which is also upgraded to Lion but showing no problems whatsoever. I bought t
-
Mail adapater with mail package option support cc ?
Hi, I have scenario to sending mail information to multiple receiver. does mail adapter support cc as well ? if yes which field that i have to use ? Thank you and best regards Fernand
-
Using multiple computers to connect the ipod shuffle
How do I use multiple computers. The tech support said once you use one computer you cant change even if you download your itunes disk. Can anyone help?
-
Using Crystal Reports 6.0 ActiveX control on Win 95 clients or Win 95 development machines I cannot insert the object into the ActiveX widget. In distributed mode the Control cannot be 'Realized' and in development, the Win 95 machine hangs up. Compl