RWB Message Monitoring - operation specific

When looking at message monitoring in RWB, I can't see the actual operation for the message when using operation specific Service Interfaces.
How can I see the operation for a message in RWB Message monitoring?

I don't think operation specific search is possible.
Regards,
Prateek Raj Srivastava

Similar Messages

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

SOAP messages not visible in RWB - Message Monitoring - Adapter Engine

Hi,
following scenario:
ERP is sending IDocs to PI.
Within PI an integration process sends the IDoc data through a SOAP (WS) receiver channel to a system far far away.
In RWB -> Communication Channel Monitoring I can see all delivered messages selecting my SOAP channel.
But:
I can´t see the SOAP messages in RWB -> Message Monitoring -> Messages of Adapter Engine.
In RWB -> Message Monitoring -> Messages of Integration Engine I only see SOAP messages with status "Error".
Successful column is empty.
Do I have to adjust some system / monitoring parameters also seeing SOAP messages in RWB->Message Monitoring?
Thanks in advance,
André

Hi Ravi,
thanks.
But there are thousands of successful messages delivered to the receiver.
These successful messages can only be seen in the Channel Monitoring.
I can´t find these successful messages in Message Monitoring.
Only some with status "Error" are displayed.
Strange...
Cheers,
André

Details button does not work in RWB Message Monitoring

Hi,
I am getting
'Runtime error - details is null or not an object'
client-side javascript error message, when I select a message and press the 'Details' button in the runtime workbench message monitoring. The message details do not show up. I am using XI 3.0 SP12.
Any idea how we can fix this javascript error?
Thanks in advance,
Suresh.

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

RWB-Message Monitoring and End-to-End Monitoring

hi
Can someone explain the differences between Message Monitoring & End-to-End Monitoring through RWB. I see both of them displaying the messages status with better descriptive with End-to-End Monitoring.

HI Chandra
You use message monitoring in the following cases:
1 To track the status of messages
2 To find errors that have occurred and establish what caused them
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/2f/4e313f8815d036e10000000a114084/content.htm
You use end-to-end monitoring in the following cases:
1 If you want to monitor message processing steps in a number of SAP components (to be configured).
2 If you want to monitor the path of individual messages through these SAP components, from start to end.
Check this help for further info:
http://help.sap.com/saphelp_nw04/helpdata/en/82/9e8dfe9eadbd4b9194c433e646b84e/content.htm
End-to-end monitoring includes message monitoring, adapter monitoring, BPE if BPM is involved.. so end-to-end monitoring tells you complete description of your scenario......but message monitoring is concerned only with source message coming to target message successfully generated.
Cheers..
Vasu
** Reward Points if found useful **

RWB - message monitoring

In RWB - Messge Monitoring,
for the Message from Component drop-down, I selected Adapter Engine on XXXXX.
and for From drop-down, I selected Data Base
After this step, selecting Display gives the page can not be displayed.
What could be the problem.
-Naveen.

Satish,
when i have typed in this:
http://hostname:portnumber/AdapterFramework/monitor/monitor.jsp
A message is displayed saying the following:
AdapterMonitor redirect
The Adapter Monitor page was moved to the Runtime Workbench.
Please follow these steps to open the Adapter Monitor:
open the Runtime Workbench start page
choose Component Monitoring and select components with status all
select the appropriate Adapter Engine
click on the button Adapter Monitoring
When I have done that it is giving that page can not be displayed.
Please help.
-Naveen.

Setting Access Limits in RWB Message Monitoring

Hi All,
In RWB Monitoring -> Message Monitoring -
normally we can monitor all the messages and systems.
Here is it possible to restict a particular 'user' in such a way
that he can monitor only a few messages which is only relevant to him.
Any help will be appreciated.
Thanks in Advance
Regards,
Chemmanz

Hi All,
Thanks for the quick reply.
This feature is available for SXMB_MONI.
So RuntimeWorkbenchMonitoring ->Message Monitoring is also likely to have this feature.
Does anybody have any idea / any docs available ??
Thx n Rgds,
Chemmanz

In RWB (message monitoring), a small doubt

Hi All,
When i go to runtime workbench and click the message monitoring option, I get a drop down list with text "Message from component". In this list there are two things :
af.cnw.cbrindnw
af.cnw.
Can somebody explain the meaning of these.
here "cnw" is our netweaver server system id
and "cbrindnw" is our netweaver server name
Regards,
Mona.

Hi,
Please check the config required for runtime workbench:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0b4580be-0601-0010-d3ad-bd6ce51ae916
Check if the following paramter are set correctly:
Please can you check on the parameters:
com.sap.aii.rwb.serviceuser.name
com.sap.aii.rwb.serviceuser.pwd
com.sap.aii.rwb.serviceuser.language
in the excahnge profile. check for correct userid and password.
Also check if the user has the following roles:
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Regards
Vijaya

Jdbc adapter error on confirmation message in message monitor (rwb)

I have the scenario iDoc -> PI 7 - > jdbc (AS400 odbc driver).
When I do INSERT statements, the data is stored in the Database and the RWB message monitoring shows status Successfull.
However, for every insert, an other message shows up in the message monitoring with reversed Sender and Receiver (so it looks like a confirmation message is trying to find its way back to XI). This message first is is Status "Waiting", and after some time gets in Status "System Error".
As I am not expecting any responses in my XI configuration (as I have no place to send them to), I want to stop these messages showing up in the Adapter Engine (as there will be many Error Status messages that are of no interest to me).
How can I stop these messages, or what should I do in XI to process them (and dump them in my receiver determination). I have NO BPM involved .

Hi,
For each open connection a entry is made j2ee stack.So when the it reaches to max and execption is thrown.
In Jdbc adapter configuration -> advance mode -> Set -> Disconnect from the database after processing each message.
Should solve the prob
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Messages remain in Scheduled status in message monitoring in RWB

Hi PI experts,
I have got a situation where there are several messages showing in the Scheduled status. I followed the path RWB > Message Monitoring > Adapter Engine > Database (Overview) > Display.
QoS for these messages is EOIO, however there are no messages stuck in the queue. All other channels are running smoothly. Only with this particular channel the messages remain in Scheduled status for a long time.
I am neither able to make out the roor cause nor reprocess/resend these messages. Pleaes help.
Regards,
Dhawal

Hi Suraj,
What you said is absolutely correct. However, as I mentioned, the error message was not visible in RWB.
My problem just got resolved. What I did is this,
I followed the link http://<server>:<port>/MessagingSystem/monitor/monitor.jsp which is SAP Message Display Tool.
Here in EOIO Sequence Monitor I found the error message and it's predecessor. When I resent the erroneous message from here, all subsequent Holding messages got processed.
Thank you everyone for your help. Have a gr8 day...
Best Regards,
Dhawal

Data Persistency in Message Monitoring of RWB

Hi All,
I am dealing with Sync. Interfaces and need to monitor the messages from Message Monitoring.
I have 2 Problems in the monitoring : -
1.     I can only see the messages for last 2 hrs in Message Monitoring.
        Messages Older then 2 hours are not getting displayed.
2.     Also if i am unable to see complete set messages in the 2 hr interval.I mean randomly
         messages are getting lost in message monitoring.
Is there any setting we need to maintain for Message Monitoring?
Helpful Answers will be rewarded points.
Thanks & Regards,
Zabiulla

Hi
have a look at this SAP Note 1031773 - Activating the message overview in RWB message monitoring
message struck in adapter eng.(RWB message monitoring)
http://help.sap.com/saphelp_nw70/helpdata/EN/45/0ea84637643c0ae10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/be/38f0d8cbfe11d2a5f80060087832f8/frameset.htm
Thanks
Edited by: Abhishek Agrahari on Jan 8, 2009 8:14 AM

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Basic Authentication in RWB's Message Monitoring

Hello,
we have XI 3.0 SP11. When I try in the RWB:
Message Monitoring -> IE -> Details -> Message Content
I can't login over the Basic Authentication menu. The user has all XI-roles and the SAP_ALL profile but it doesn't work.
What's wrong?
thanks for help
André

Add role "SAP_J2EE_ADMIN" and try it again.

How to add proxy node in message monitoring RWB

Hi all,
in RWB message monitoring , i can see two options in drop down list those are integration engine and adapter engine. i want to add one node for proxy run time also.
can anybody let me know how to add a node for proxy runtime?
any document or help will be appreciated
Thanks
sandeep sharma

Hi,
connect your SAP application system (like ERP, etc.)
to SLD - the same one as PI uses (you need to have PIRWBUSER on ERP too)
then start transaction SPROXY and build and interface on it
start it and check if you see the new node in message monitoring
Regards,
Michal Krawczyk

Browser: Shortcut to Message-Monitoring URL in RWB?

Hi everybody,
does anybody know a shortcut to Message-Monitoring URL in the RWB?
I hate clicking
Regards Mario

Hi,
Do this to get the Short cut to RWB--Message Monitoring
1) Right click on the Desktop-say New-Shortcut
2)provide the location as http://hostname:Port/rwb/index.jsp
3)Say Next
4)Provide what evr the name you want and say Finish
Come to Desktop and double click on the Icon
Regards
Seshagiri

RWB Message Monitoring - operation specific

Similar Messages

Maybe you are looking for