RWB not in SLD

Hi guys,
I am facing the following problem in a new PI 7.01 installation (be careful the PI version is 7.01 not 7.1).
According to the Readiness Check guide everything seems to be working fine, but the RWB is not registered itself in the SLD, under technical systems of type Exchange Infrastructure.
Also, I cannot see the RWB under "Tools" section in the RWB monitor page itself.
Apart from that, the RWB works fine, the Caches are ok, everything green.
Also in the Adapter Monitoring section I can only see the JPR adapter, and no other adapters.
Your responses will be rewarded.
Thank you.

Hi,
I have the 7.1 version, but this might help too. Check Adapter Engine missing in SLD and RWB and note 720717.
Thanks,
Rick

Similar Messages

SLD Communication: LD_ERROR and RWB not connected to SLD

Hi all,
I have installed SR2 on MS SQL Server 2005
I have run the template installer and also rectified the errored out steps
All RFC destnation are created propely and thr connection checked
I have three queries
1) In SLDCHECK the error i get is
         Calling function LCR_LIST_BUSINESS_SYSTEMS
          Retrieving data from the SLD server...
          Function call returned exception code     4
          => Check whether the SLD is running!
2)In SXI_CHACHE cache is obsolete and there is LD_ERROR
3)In RWB the component monitoring and other stuff when i try to open give and error
       Communication from SLD failed:500 Internal server Error
I went throught note 764176
and did the following
1. In the SLD editing interface, choose "Administration" -> "Content Maintenance". Select "XI Integration Server" from the drop-down menu, and navigate to the associations of the integration server. Select the "XI Integration Server Logical Identity" association and delete the association by choosing 'Remove'.
2. Switch to "Home" in the "Technical Landscape" view, and select the "Exchange Infrastructure" technical system type there. Select all domains and XI components for the host and delete these by selecting them and pressing 'Remove'.
3. Restart the J2EE server. After you restart the server, the XI components log on to the SLD again and create a new entity of class "XI Integration Server".
But after restart none were registered .. i also tried logging into Rep and Dir but these were not registered
in "Technical Landscape" ->"Exchange Infrastructure"
Rgds
aditya

I have three queries
1) In SLDCHECK the error i get is
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
2)In SXI_CHACHE cache is obsolete and there is LD_ERROR
3)In RWB the component monitoring and other stuff when i try to open give and error
Communication from SLD failed:500 Internal server Error
Firstly are you installing the PI7.0?
1) In SLDCHECK the error i get is
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
check the SLDAPICUST is pointing to correct SLD,
check RFC destinations LCR*, SAPSLDAPI (check this names in the Intallation document once) are created and working fine.
Also make sure your SLD is up and running.....
You need to cross check the JCO connections created.....
2)In SXI_CHACHE cache is obsolete and there is LD_ERROR
check RFC destination integreation_directory_HMI is created and working fine.....

RWB not communicate with SLD

Hi friends,
I am getting error when i was trying to open the Runtime Workbench. and i click on any option i was get the error as Error during communication with System Landscape Directory: Read timed out .
Any one come into such kind of situation. please help if u can.
Thanks & Regards,
Gaurav Jain

Hello Liu,
I check all the setting in the exchange profile. but still it gives me the same error. as
Error during communication with System Landscape Directory: User credentials are invalid or user is denied access
I checked that we provide the proper access. but still it gives the error.
Please suggest some way to solve it.
Thanks & Regards,
Gaurav Jain

RWB not working

Currently I 'm working in XI 3.0
My RWB is not working just after I deployed JMS MQ Series 7.0 files and changed the SDM password. But my Integration Repository and Integration directory is working fine.
The error in RWB,
component monitoring is :
com.sap.engine.services.servlets_jsp.server.exceptions.WebServletException: Error in dispatching request to servlet [/sub/componentmonitoringpageprocessor].
performance monitoring :
10 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered - Attempt to create JCo connection object failed for domain null - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered - Attempt to create JCo connection object failed for domain null - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered
configuration :
Cannot read PI domain from the SLD; monitoring cannot therefore be configured. Error message: com.sap.aii.rwb.exceptions.BuildLandscapeException: No System Landscape Directory registered
Please help me!!!!

Hi,
I have checked with the SAP notes 768456 , 764176 , 924721 , and also tried refresing the CPACaches. But nothing seems to work.
I have checked for the XIRWBUSER and all the other users in SU01 and none of them is locked.
Please help !!!!!!

Error on Component Monitoring On RWB after changing SLD .

Hi,
Guys If my below given questions are not clear to You ... >>>>>>>>>>>>Do ask me for Clearity
My PI 7.0 System was on Local SLD earlier, at that time My Scenarios/ RWB Components were Working Fine.
Now, On Place of Local SLD, We are onto Centerlise SLD on SOLUTION Manager.
after few Changes now my ESR and ID are getting product and Buisness System from Solution manager's SLD.
but ................. >>>>>>>>>>>
>
>>
>>>>
>>>>
On RWB - Component Monitoring - Each Component is coming into Red/Error mark.
So ..
Question : Is RWB is also effected from SLD Changes ???????
r
Facts Found during troubleshooting : -
>
1. In Solution Manager's SLD - Technical System - Exchange Infrastructure - Only one Technical System is Coming for Integration Server.
while
IN Old Local SLD - Technical System - Exchange Infrastructure - 6 different tecnical system was coming ( Integration Server/ RWB / Integration Engine / Adapter Engine ...etc)
Can this be the reason ????????
Please Suggest, What is Missing ?
for Sld Change following steps are performed .. .. . .
1. PI 7.0 like User Creation in Solution manager.
2. Changes in SLDAPICUST in PI System.
3. Changes Done in Excange Profile for SLDNAME.
4. Changes Done in Virtual Manager for SLDNAME.
5. RZ70 on new SLD.
Regards

Hi ,
Solution : After changing Local SLD to Domestic SLD , Error was Coming in RWB - Components ...
Solved by :
These are Documents Used for doing Changes in SLD When found Error on RWB.
764176 - Error in XI due to inconsistent SLD contents.
1031321 - Self-Registration of Adapter Engine and RWB fails
Problem has been solved.

Please Confirm these Entries Are Correct Or Not in SLD

Hi Experts,
I Have The Following Entries When I Go for SLD>TS>Exchange Infrastructure
Adapter Engine on SID.Hostname
Domain Hostname
Integration Directory on SID.Hostname
Integration Repository on SID.Hostname
Integration Server on Hostname
RWB on SID.Hostname
I Heard that There Should be Another Registered Entry Like Integration Server on SID
Should we have that Entry Also Or The Above Entries Are Enough to Have ???
please Let Me Know
Regards
Khanna

Hi Ahmed,
I Red this Link, Here they Said that They Applied Note:::764176
But here in My SLD>TS>>Exchange Infrastructure I Have 6 Entries Which I Posted Earlier .These All Are Correct Only.
Should I Apply That Note In My Case ????
We Imported BASIS PI 7.0 TPZ File into IR.
Should We Import Any .TPZ File Into ID Also ????
Please Help Me.
Regards
Khanna

Adapter Framework can not access SLD

Hi,
That's what I get from JPR adapter:
"SLD host:port = sap2:50100
Error getting JPR configuration from SLD. Exception: User credentials are invalid or user is denied access
No access to get JPR configuration"
And in the trace file I'm getting :
"User J2EE_GUEST, IP address
Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available]."
CCMS service in Componenets Monitoring for Adapter Engine is shown as grey.
Do I miss something here?
Sincerely,
Evgeny.

It seems like CPACache tries to get the configuration with J2EE_GUEST authorhizations.
Here is the log:
CPA Cache not updated with directory data, due to: Couldn't open Directory URL (http://sap2:50100/dir/hmi_cache_refresh_service/ext?method=CacheRefresh&mode=F&consumer=af.x01.sap2), due to: HTTP 401: Unauthorized
User J2EE_GUEST, IP address
Error processing an HTTP request. Http error [401] will be returned. The error is [Access Denied.No details available].
Confirmation handling failed, due to: Couldn't send confirmation, due to: Couldn't access Confirmation URL, due to: HTTP 401: Unauthorized
Any idea where do I miss configuration step?
Thanks.

Dimension Current Flag and Last Update date not updated - SLD issue!

Hi.
ODI is running pretty well now. I have created several interfaces from flats, multi database tables, but still have to test the services and cdc, etc... later I will do this.
I am having a small issue here when dealing with Slowly Changing Dimensions. I am trying to populate a product dimension. I use a Load KM and the SLD KM. Then I update a product row in the source, and I wish to make sure that type-II runs OK for major and minor changes after running the interface.
Well minor changes run ok, deletes don't run at all, and update for major changes should generate another surrogate key and turn the old record "current flag" to zero and "close"/update the last update date as well!!!
What am I missing here? Is this related to the KM restrictions?
"Restrictions:
- Make sure to map ALL target table columns flagged as: "Surrogate Key", "Natural Key", "Current Record Flag", "Start Timestamp" and "End Timestamp". Notice that mappings set for the "Current Record Flag", "Start Timestamp" and "End Timestamp" columns are not used."
Do I need to implement somehow that behaviour or use another KM?
Another question regarding data warehousing: Well usually in a bespoke DW we can have N sources, N staging areas, and several data marts. Using ODI, for instance what are the best practises to create or simulate this behaviour??
I know that using a Knowledge Module I can load/extract (to temp tables in the source work schema), then integrate in the target schema.. using the same schema to temp staging tables or another schema.... what is the best aproach?
Any dw people wants to share some experiences here?
Thank you all.
Best regards,
Alvaro
Message was edited by:
Alvaro Silva

Thanks Cezar :)
Well Updates work if I unckeck 262!!! :) But deletes are not setting the CURR to zero!!!
PS: um abraço para ti também .... o mundo é pequeno! :) será que podes adicionar-me no messenger para alguma troca de experiências? [email protected]
Alvaro
Message was edited by:
Guest

B2B scenario with IDocs, sender system not in SLD

Hello all
When sending a purchase order IDoc (ORDERS05) out of SAP ECC 6.0 I get the following error in SM58:
No service for system SAPPEE, client 200 in Integr ation Directory
Message no. SR053
Until now I did not register the SAP ECC 6.0 system in the SLD. Is this absolutely mandatory?
The RFC-Destinations work like a charm, the user (type C) and authorizations (for now SAP_ALL) should be ok (same settings in XI and SAP ECC system).
In the integration directory I defined a partner "IDOC_SENDER" with the following identifiers:
Agency = http://sap.com/xi/XI
Scheme = XIParty
Name = IDOC_SENDER
Agency = PEE_200 (SID with client from customers system)
Scheme = ALE#LI#LF
Name = 0000601140 (this is the vendor id from customers point of view)
Agency = AEE_200 (SID with client from vendors system)
Scheme = ALE#KU
Name = 0000001011 (this is the customer id from vendors point of view)
Within this partner "IDOC_SENDER" I defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
Within this business service "Order" I defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
Based on this I created a receiver determination, interface determination, etc.
I also configured things in IDX1, IDX2. The metadata (structure info of idoc type ORDERS05) was successfully loaded.
Did I miss something? What to do to eliminate this error:
No service for system SAPPEE, client 200 in Integr ation Directory
Message no. SR053
Any help would be greatly appreciated!
Thanks in advance
Renaud

I think there are some mis-configurations:
defined a business service "Order" and assigned ORDERS.ORDERS05 as allowed outbound-interfaces.
You do not define a business service when IDOC/ RFC/ PROXY is sender/ receiver
It should be Business System and it has to be defined in SLD and then imported in ID. (search on SDN for How to create Business System )
defined a sender communication channel "Order_send_IDOC" with adapter type IDoc.
You do not create Sender channel when IDOC/ PROXY is sender.
I would suggest that you follow steps mentioned in this wiki: http://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
Regards,
Abhishek.

Communications data: Could not send SLD data - still not resolved

Hello,
SAPMMC shows this error in my PI system while startup.
RZ70, Visual Admin -> SLD Data Supplier are OK and SLD has my ABAP - Java systems registered.
What can be causing this when everything works fine?
Thanks
Gökhan

Yes,
It is critical to obtain a connection to the SLD as XI will access and maintain the central data from this SLD. Since you have mentioned that it is a fresh installation, check all the post-installation steps again. Check for the SLD connections in the RFC destination. Check if the SLD data supplier you have created for XI is working fine. Check the connections from SLD to SAP are fine.
Award if helpful.
Regards,
Sarath.
Please read the Forum's Rules of Engagement,
i.e.,
/thread/117188 [original link is broken]
and refrain from requesting points
SDN PI/XI Forum Moderator

Communications data: Could not send SLD data

Hi,
I have a fresh PI installation but the above warning message appears in the SAP management console when I start my system. Is this critical?/how to fix?
Thanks,
Gökhan

Yes,
It is critical to obtain a connection to the SLD as XI will access and maintain the central data from this SLD. Since you have mentioned that it is a fresh installation, check all the post-installation steps again. Check for the SLD connections in the RFC destination. Check if the SLD data supplier you have created for XI is working fine. Check the connections from SLD to SAP are fine.
Award if helpful.
Regards,
Sarath.
Please read the Forum's Rules of Engagement,
i.e.,
/thread/117188 [original link is broken]
and refrain from requesting points
SDN PI/XI Forum Moderator

Need notes on SLD?

Hi,
Need Step by Step for SLD.
How to configure SLD?
Wht is CIM Client?wht is the Use?
Regards
Kiran

Hi Kiran,
Please check below links
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/01ea90ab24235de10000000a1553f7/frameset.htm
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
Why and what is a SLD
SQL query problem, listing all deliveries linked to an invoice
Hope this helps
Thanks
Santosh

XML Monitor time (sxmb_moni) and Message Monitoring (rwb) not same.

Hi,
I have changes the TIME ZONE using STZAC but then the xml monitoring time log still doesn't match with the system and java engine time.
Please help.
Thank you and Regards
Fernand

Hi
Follow this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3cced290-0201-0010-99bc-ff88c32a4495
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Regards,
Santosh.

Integration Repository not registering in SLD

I have had a server released to me for final config, (PI7.0 SP10) but I am having some errors during final config/post installation steps.
There errors are:
#10 13:24:04 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.utilxi.misc.api.BaseRuntimeException
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Cannot connect to Repository
I have checked the ExchangeProfile, SLD, Users are not lcoked. I have looked into rep/support/public/index.html Log
407 12:54:13 [SAPEngine_Application_Thread[impl:3]_188] ERROR com.sap.aii.ib.core.util.AbstractWebUtils: Internal error: Could not find SLD name for XI Application "RWB"
Thrown:
MESSAGE ID: com.sap.aii.ib.bom.landscape.rb_landscape.SLD_***_NOT_FOUND_EX
com.sap.aii.ib.bom.landscape.SLDElementNotFoundException: Unable to find an associated SLD element (source element: SAP_XIIntegrationRepository, [CreationClassName, SAP_XIIntegrationRepository, string, Name, repository.xib.vpsddbvirt, string], target element type: SAP_XIIntegrationServer)
Basically, the Integration repository will not register in the SLD.
Any ideas? I have run SXI_CACHE, and /CPACache/refresh?mode=full but this hasn't helped. I have asked Basis to check all Applications are running in Deploy in the Java Visual ADmin.
Everything appears to have registered correctly. I am loathe to use OSS Note 764176 as this is a Major component.

> Hi,
>
> Have you mentioned the necessary parameters for the
> IR in Exchange Profile?
>
> Regards,
> Kumar
I have only mentioned that I have checked them - and by that I mean compared to Test and Dev (with the domain changing for different servers)

Logical System not appearing in SLD

Hello Friends,
Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
[The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
Request your kind adivse on what can be done. Where can I lookout for possible errors.
Thanks & Regards,
Anand Patil

Hi
On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
Check the Same SLD Roles with some PI Service User.
Regards
Prabhat Sharma.

RWB not in SLD

Similar Messages

Maybe you are looking for