S_ALR_87013611 vis-a-vis FS10N (Sample download) Not matching

Dear FICO Gurus,
Please help me out from this, here my issue is the fi doc is not matching with co doc. for particular docu were posted without cost centre.but out one docu was getting updated in controlling doc one is not getting updated.
The difference is Rs.1500/- in this case. It has been identified as line item no.9 which does not have a cost center. If that is the reason of the same getting                                        
     not reflected in cost center download, how does figure of line item no.10 gets accounted for ??

The TDMS VIs probably are better, but I started this project before they were available, and I spent a considerable amount of time with the TDM Header Writer VIs to create my file format. I don't use the TDM VIs to write the files; I do that all with my own binary format that is fast and efficient. I also stripped out all the extraneous gunk that the TDM files like to put in, and customized the files with my own properties. Unfortunately, I am disappointed with the time necessary to read and write properties, but it's too late now to replace the whole system with a database backend.
Anyway, I'm hopeful that there is a solution to this problem. I doublechecked all the options in the installer and app build specifications, and I didn't see the checkbox for Storage VI Support. I have a fuzzy memory of this; is it possible that it existed in a previous version of the builder?
Chris

Similar Messages

  • Sample Rates not Matching

    I'm using Firewire from my Sony HVR M15U to FCP 6. After ever capture I'm getting a message "that 1 or more of the media files does not match the sample rate of your source tape". It also warns that audio may be out of sync with video. However, that does not seem to be the case. I have check the sample rates and they seem to match. Any thoughts?

    I saw this warning several times at a station I was freelancing at several months ago. Never could figure out the difference it was seeing. Never made a difference with sync or anything else.
    I might have noticed a longer render time with those jobs that had the warning, but that is just something I thought I noticed and I never had time to set up a test of that.
    All jobs output to tape just fine in the end. Happy me, happy client.
    They were using a Blackmagic card for input if that could be a control variable. Sorry, I don't recall the model number.

  • Interactive Report download not matching displayed data

    Hi
    I have an interactive report with a simple where clause in:
    select * from table etc
    where a.entry_date > :P2_DATE
    P2_DATE is a select list with redirect, with 2 options. Selecting the first option (the default) should return ~200 rows, the second should return ~800 rows. This functionality works correctly in the interactive report display, however the download to csv option only ever exports the ~200 rows - as if the IR download is fixed to the original query results. I'm using version 3.1.2.00.02.
    Is this a known bug?
    Thanks
    -Marc

    Hi
    Have you tried changing it to a Select List with Submit?
    Typically, this sort of behaviour means that the value selected from the list is not being stored in the session, so the report does not know that value - only the preivious value.
    Also, how are you setting the default? I tend to do this using a page computation (conditional on the item being null)
    Andy

  • F.08 & fs10n balance is not matching with fbl3n balance

    Dear all
           i have a problem with FBL3N,FS10N,&F.08
    Example
             G/l a/c :14001200   Sundry Cr - Exp -Dom
           in fbl3n balance amount is =  16,820,645.64-
           in  Fs10n balance amount is =17,160,867.86-
            in f.08 balance=                     17,160,867.86-
    Am confused why system showing this mismatch
    Regards
         Ajeesh.s

    Hi Ajeesh,
    The problem you are facing may be due to the Special GL transactions(may be Down Payments made to Vendors/Sundry Crs). The balance can be matched only after you have cleared the items in the Spl GL with the T-Code F-54 only after the bills get approved. The last entry will be clearing with T-Code F-44.
    Hope this will solve your problem. Reply if you have any issue.
    Regards,
    Ashish

  • Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

    hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
     the error message it shows is
              ******************************** ERROR ****************************************
    * The version of gcc in the path does not match the version of gcc used to    *
    * compile the currently running kernel.  This can cause unpredictable         *
    * behavior in kernel drivers and should be fixed.                             *
    * gcc version: Linux)                                                          *
    * kernel compiled with: 4.3.2                                                 *
    ******************************** ERROR ****************************************
    my kernel source version is 
       linux-8nes:/home/admin # rpm -qi kernel-source
    Name        : kernel-source                Relocations: /usr/src
    Version     : 2.6.27.29                         Vendor: openSUSE
    Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
    Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
    Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
    Size        : 309251954                        License: GPL v2 only
    Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
    Packager    : http://bugs.opensuse.org
    URL         : http://www.kernel.org/
    Summary     : The Linux Kernel Sources
    Description :
    Linux kernel sources with many fixes and improvements.
    Authors:
        Linus Torvalds <[email protected]>
        see /usr/src/linux/CREDITS for more details.
    Source Timestamp: 2009-08-15 17:53:59 +0200
    GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
    GIT Branch: SLE11_BRANCH
    Distribution: openSUSE 11.1 
    i had also installed GCC 4.3.2.
    it shows the error message as i had posted.
    please kindly help me on this.
    Thanks and regards,
    P.karthick

    Check this solution

  • My itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?

    my itunes keeps telling me to contact support when i try to connect a visa card and will not let me buy music. any ideas why?

    No one here can say specifically why. But you need to do what it says, contact iTunes Support. Click the Suppor tab above then the link under the Contact Us area and you'll be take to a page where you'll be guided appropriately.
    Regards.

  • HT5552 My Singapore VISA Credit card is not accepted as a valid payment card in Switzerland-.WHAT CAN I DO? WE just moved from Switzerland to Singapore and have cancelled our Swiss Creditcard...

    Our Singapore VISA Credit Card is not accepted as a valid Payment card b the Swiss APP Store…..
    We left Switzerland and therefore canceled your Swiss mastercard ….
    An idea's`

    Hi ..
    You posted in the, "Setting Up Apple Pay" community, so if you are tryiing to setup Apple Pay, be aware, it's limited to the U.S. only.
    Set up and use Apple Pay
    If it's not an Apple Pay issue, try this support article >   Can't change the country of your iTunes Store, App Store, iBooks Store, or Mac App Store account

  • VISA: (Hex 0xBFFF003E) Could not perform operation because of I/O error

    Hello
    I'm trying to communicate with a device which have to be tested with my application. So I send it a command to initiate the device to send me back some values. This values are sended continously with a baud rate of 57600.
    I create a VI to test this communication but I always get the error:
    VISA:  (Hex 0xBFFF003E) Could not perform operation because of I/O error
    I have googled for this thread, but all the described solutions didn't solve my problem (ex. Set Buffer Size to 48, Various Byte Count Values for the VISA Read function, etc.).
    Note: the VI works properly in the LabView 6.1! I have tested. I also tried to receive the Data with a Termial programm (works fine). But another COM Port (on an USB Serial converter) shows me the same Error.
    I just updated to Visa 3.4.1, but no success
    LabView 8.0.1

    Yeah it works
    of course buffer to 4096 and mask to 48
    I added a Flush I/O buffer (mask 16) before reading from Visa (problem was to read data).
    And suddenly it works fine.
    I can't reproduce where the error exactly was. Could it be possible that the RX buffer was already full
    at the time I would to read from Visa or at the time the COM port received data? There are some questions to find out:
    how does LV handle the buffers? will the buffers be cleared if LV starts? when does LV flushes the
    buffers?
    thx

  • Office365 API : Windows 8.1 samples do not build, AuthenticationHelper class has errors

    just downloaded latest Office365 API samples for Windows 8.1 Store apps from http://dev.office.com/code-samples-detail/1511
    Alas I get the following build errors, even after having updated all nuget packages to their latest versions:
    Office365Samples\Office365StarterProject\Helpers\AuthenticationHelper.cs(156,44,156,63): error CS1061: 'Microsoft.IdentityModel.Clients.ActiveDirectory.AuthenticationContext' does not contain a definition for 'UseCorporateNetwork' and no extension method
    'UseCorporateNetwork' accepting a first argument of type 'Microsoft.IdentityModel.Clients.ActiveDirectory.AuthenticationContext' could be found (are you missing a using directive or an assembly reference?)
    Office365Samples\Office365StarterProject\Helpers\AuthenticationHelper.cs(341,28,341,87): error CS1502: The best overloaded method match for 'Microsoft.IdentityModel.Clients.ActiveDirectory.AuthenticationContext.AcquireTokenAsync(string, string, Microsoft.IdentityModel.Clients.ActiveDirectory.UserCredential)'
    has some invalid arguments
    Office365Samples\Office365StarterProject\Helpers\AuthenticationHelper.cs(341,76,341,86): error CS1503: Argument 3: cannot convert from 'System.Uri' to 'Microsoft.IdentityModel.Clients.ActiveDirectory.UserCredential'
    Office365Samples\Office365StarterProject\Helpers\AuthenticationHelper.cs(343,24,343,30): error CS1061: 'Microsoft.IdentityModel.Clients.ActiveDirectory.AuthenticationResult' does not contain a definition for 'Status' and no extension method 'Status' accepting
    a first argument of type 'Microsoft.IdentityModel.Clients.ActiveDirectory.AuthenticationResult' could be found (are you missing a using directive or an assembly reference?)
    Office365Samples\Office365StarterProject\Helpers\AuthenticationHelper.cs(343,34,343,54): error CS0103: The name 'AuthenticationStatus' does not exist in the current context
    Building with VS2013 Update 4
    What am I doing wrong? Is latest nuget of Microsoft.IdentityModel.Clients.ActiveDirectory.* perhaps breaking it?
    PS is there an Office365 API forum on MSDN? If not, might be interesting to create one?
    edit:
    in case it helps: here is the list of nuget packages in the solution:
    <?xml version="1.0" encoding="utf-8"?>
    <packages>
      <package id="Microsoft.Azure.ActiveDirectory.GraphClient" version="2.0.5" targetFramework="win81" />
      <package id="Microsoft.Data.Edm" version="5.6.3" targetFramework="win81" />
      <package id="Microsoft.Data.OData" version="5.6.3" targetFramework="win81" />
      <package id="Microsoft.Data.Services.Client" version="5.6.3" targetFramework="win81" />
      <package id="Microsoft.IdentityModel.Clients.ActiveDirectory" version="3.0.110281957-alpha" targetFramework="win81" />
      <package id="Microsoft.OData.Client" version="6.9.0" targetFramework="win81" />
      <package id="Microsoft.OData.Core" version="6.9.0" targetFramework="win81" />
      <package id="Microsoft.OData.Edm" version="6.9.0" targetFramework="win81" />
      <package id="Microsoft.Office365.Discovery" version="1.0.22" targetFramework="win81" />
      <package id="Microsoft.Office365.OAuth.Windows" version="1.0.22" targetFramework="win81" />
      <package id="Microsoft.Office365.OutlookServices" version="1.0.22" targetFramework="win81" />
      <package id="Microsoft.Office365.SharePoint" version="1.0.22" targetFramework="win81" />
      <package id="Microsoft.Spatial" version="6.9.0" targetFramework="win81" />
      <package id="Newtonsoft.Json" version="6.0.8" targetFramework="win81" />
      <package id="System.Spatial" version="5.6.3" targetFramework="win81" />
    </packages>

    Hello wolkenjager,
    This sample has not been updated to use this version of ADAL. As you suggest, the version you have specified appears to break the sample. We thank you for trying this out! :) We suggest that you revert to the version specified in the packages.config
    (2.10.10910.1511).
    With regards,
    Michael Mainer
    Michael | Microsoft Exchange Developer Content
    The
    Exchange Development Forum Guide has useful information for using the Exchange Development Forum.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Sample apps not working on vs 2015ctp 6

    i'm new to win app development.
    i'm using vs 2015 ctp6
    i tried following the C++ with XAML tutorial. but in part 5 'SimpleBlogReader' app, i got a bunch of errors in 'App.xaml' file. So i downloaded the sample app SimpleBlogReader to see what was going wrong. But, when i tried building the sample app
    it too displayed the same error messages. what is the reason for this? Are the sample apps not fully compatible with VS2015 ctp6? 

    Hi Minion_94,
    The doc you ref is this one:
    Part 5: Create a blog reader, correct? But I do not find any link in the doc that provide download for the sample app, could you help me to find it out.
    I may want to test on my machine with Visual Studio 2013 update 4 to see if the issue is related with sample or its a environment issue.
    Personally I would not recommend you to use ctp6 since its not officially announced but its a preview version which might cause some problem.
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Audio sample rate does not match (HDcam to dvcam)

    I'm trying to import clips and keep getting this message:
    "The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape."
    Footage was originally shot on HDCAM and transferred to DVCAM elsewhere. Using FCP 5, am importing via firewire from a Sony DSR-11 deck. Using DV NTSC 48kHz Anamorphic as capture settings (though I've tried everything that I thought might possibly work with no success). The audio does not seem to drift over the course of several 5 minute or so clips. Clip settings show audio at 48 kHz (don't know if that's from capture settings or from actual data). Seems to me all audio should be 48 kHz 16 bits, so can't figure out what's going on. I have to export an EDL for the project to be finished in HD. Read some similar threads that ended in December, seemingly without much resolution. My broader concern is why this is happening; my immediate concern is do I need to worry about this right now since the media files will need to be recaptured in HD anyway. Any thoughts?
    Thanks

    A little more info. I'm having this problem on 4 tapes (from different cameras) that were transferred to DVCAM in a squished format to appear full screen on a 4x3 monitor. Video that was letterboxed and I can bring in with the standard DV NTSC capture settings does not have this problem. Still have the problem if I try to import the clips from the squished video with standard settings. Any thoughts?

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

  • HT1933 I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my bi

    I have old email address's I used for iTune music purchases and cannot change password on several old accounts. Now some of the music I purchased I can not download and authorize it on my device. What can I do password security does not match my birthdate on two of the accounts. Apple can not send me email with a password authorization on several current accounts that I have with them. How can I contact Apple with this annoying problem I can not fix.

    settings - app/iTunes store - sign out and sign back in with your new id.
    Note - if your older apps needs an update it will use your old apple id and password, as Apps are tied to the apple id that was used to purchase it.
    You can't merge apple id.

  • I tried to restore my ipod touch because i forgot the password, but computer says download not complete. How do I get my ipod to work?

    My computer will not let me restore my i pod touch. My daughter forgot the password and we have not been able to use it. Someone told me to restore it, I tried and the computer looks like it is downloading for a couple of minutes but then says download not complete.

    Try here:
    iOS: Device not recognized in iTunes for Windows
    Also include manually placing the iPod in Recovery mode and then try a restore
    Then try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Further, try another computer to help determine if yu have a compter or iPod problem.

  • ClickOnce: Reference in the manifest does not match the identity of the downloaded assembly Office.dll

    I have WPF application, which has the excel component reference. I have the deployment issue when i user Office 2007 installed on my server and try to access the application i get Reference in the manifest does not match the identity of the downloaded assembly Office.dll , but when office 2003 is installed there is no issue deplying.
    Below is the detail of the issue.
    PLATFORM VERSION INFO
        Windows             : 5.1.2600.131072 (Win32NT)
        Common Language Runtime     : 2.0.50727.3082
        System.Deployment.dll         : 2.0.50727.3053 (netfxsp.050727-3000)
        mscorwks.dll             : 2.0.50727.3082 (QFE.050727-3000)
        dfshim.dll             : 2.0.50727.3053 (netfxsp.050727-3000)
    SOURCES
        Deployment url            : http://<Server>/VFOLDER/pages.xbap
        Application url            : http://Server/VFOLDER/Application%20Files/pages_1_0_0_3/pages.exe.manifest
    IDENTITIES
        Deployment Identity        : pages.xbap, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil
        Application Identity        : pages.exe, Version=1.0.0.3, Culture=neutral, PublicKeyToken=70c49c4ca21b317d, processorArchitecture=msil, type=win32
    APPLICATION SUMMARY
        * Online only application.
        * Browser-hosted application.
    ERROR SUMMARY
        Below is a summary of the errors, details of these errors are listed later in the log.
        * An exception occurred while downloading the application. Following failure messages were detected:
            + Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
        No transaction error was detected.
    WARNINGS
        There were no warnings during this operation.
    OPERATION PROGRESS STATUS
        No phase information is available.
    ERROR DETAILS
        Following errors were detected during this operation.
        * [6/22/2009 5:43:31 PM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
            - Reference in the manifest does not match the identity of the downloaded assembly Office.dll.
            - Source: System.Deployment
            - Stack trace:
                at System.Deployment.Application.DownloadManager.ProcessDownloadedFile(Object sender, DownloadEventArgs e)
                at System.Deployment.Application.FileDownloader.DownloadModifiedEventHandler.Invoke(Object sender, DownloadEventArgs e)
                at System.Deployment.Application.FileDownloader.OnModified()
                at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
                at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
                at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
                at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions options)
                at System.Deployment.Application.DeploymentManager.SynchronizeCore(Boolean blocking)
                at System.Deployment.Application.DeploymentManager.SynchronizeAsyncWorker()
    COMPONENT STORE TRANSACTION DETAILS
        No transaction information is available.
    Any one has faced the problem... any help will be very grateful.
    Thanks in Advance.
    Sunil

    Thanks for the reply Robin, here is some of the observation, hope you can provide some solution from your end.
    1. When Publish my build, in the Manifest file dependentAssembly has two reference to Office.dll one with version 11.0.0.0 and another with version 7.0.3300.0.
    2. In the pages_1_0_0_4 Published folder has one office.dll with version 11.0.5530.0
    3. In the root folder of the virtual directory has one office.dll with version 7.0.9466.0
    Can you please give your thoughts, what exactly wrong with the deployment, i feel its a assembly mismatch.  where in the application files i have set the required assembly. please provide your useful solution.
    Thanks in Advance.
    Sunil

Maybe you are looking for

  • I installed iworks on my mac pro.  how do i get the disk out of my laptop

    I installed iworks on my mac and I don't know how to get the disk out.  please tell me how to get the disk out of my mac.  thanks

  • How to play sound in Palm?

    Hello, everyone. I'm a beginner of Palm Application by using J2ME. I cant play a sound or a simple tone (Java Sound) in a Palm Emulator... Does my emulator not up-to-date? Or do I need to do something before importing that *.prc file? Is there any go

  • Does JSP best practice of putting under WEB-INF apply to JSF pages?

    I'm new to JSF and wondering if the "best practice" advice that used to be given of storing your jsp pages under WEB-INF (when using Model2) to keep them from being served up without going through your controller still applies with JSF. Since the com

  • Error while using '*' as command line argument

    class Expr public static void main(String[] args)      if(args.length!=3)           System.out.println("Usage: java Expr val1 opr val2");           System.exit(0);      int a = Integer.parseInt(args[0]);      char opr=args[1].charAt(0);      int b =

  • Change style of label portion of messageTextInput

    I'm trying to change the format of the label side of this UIX component but every attempt only changes the text content. Is there a way to left-justify the label or change it's font/color? Have I missed one of the styles?