S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

We implemented an own WebUI component in SAP CRM 2007 and use it in others components (with USAGE).
After we transport the component in SAP CRM 7.0 we always got an error CX_BSP_DLC_CONFIG_GENERAL_ERR at loading the component. But if we set the permission to SAP_ALL all thing work fine.
In SAP Note Nr. 1367944 we read:
"It is not possible to run the CRM Web Client without the S_DEVELOP, activity=03
authorization because it is needed by the Web Client Framework.
The S_DEVELOP authorizatin is part of the SAP_CRM_UIU_FRAMEWORK PFCG role, which must
be assigned to every user."
"This dependency has been removed in CRM 7.0."
Do we need to install some other SAP Notes at SAP CRM 7.0?
Many thanks for advices!
Handri Gunawan

Hi Handri,
I asked my collegue here, who created the note.
The note is correct, in CRM 7.0 you do not need S_DEVELOP anymomre.
The error that you have might occur because of another reason.
Could you track the call stack of this exception?
And send me back the call stack?
Regards,
Steve

Similar Messages

ChaRM - Message not appearing in CRM Web Client

Hi
My company is using ChaRM and have ZMCR setup for Change Requests. Due to audit reasons, the requester and approver in ZMCR cannot be the same person.
I have gone into SE91 and access message class SOCM_ACTION_LOG. Here, I have created my new message.
I have then gone into SPRO and setup all the necessary configuration.
And it works perfectly!!!! EXCEPT.....the error message doesn't show in CRM Web Client UI. So the functionality is working fine but obviously we need the message to appear so users no why the change request hasn't changed status.
Firstly, here is my config in SPRO:
And this is what's showing in CRM Web Client:
I have read online that function module CRM_MESSAGE_COLLECT is used to show messages in CRM Web Client. I am not an ABAPer. How does this function module work? What do I do with it? Or is there something else I need to do for this message to show?
Pretty sure my config is spot on so just need some advice on how to get the message to show.
Thanks very much!!!!!!!
Shaun

Hi Shaun,
Did you register your custom messages in the SPRO settings? You need to use Appl. Area SOCM_ACTION_LOG and make an entry in the below tanble for Single Messages;
Regards,
Vivek

Special authorization need for read cluster table??

In one report, I use following coding to read information from RFDT table:
form get_f110_parm .
f110id-laufd   = p_laufd.
f110id-laufi   = p_laufi.
f110versionpar = space.
clear:   buktab, fkttab, slktab, sldtab, trctab, usrtab,
           faetab, jobtab, f110v, f110c, trcopt, f110versionpar.
import buktab fkttab slktab sldtab trctab usrtab
         faetab jobtab f110c trcopt f110versionpar
         from database rfdt(fb) id f110id
         accepting padding.
endform.                    " GET_F110_PARM
I can fill F110c, trcopt and f110versionpar by this program. But there is no entry in table like fkttab, usrtab.
Is there any authorization need for read cluster table??
Thanks in advance.
Edited by: Amy Xie on Dec 21, 2010 10:41 AM

Hello,
After you run your code, check transaction SU53 to see if any authorization check failed.

Authorization required for creating new Organizational units in CRM

Hi all,
How can we give authorization required for creating new Organizational units (IMG CRM Master Data Organizational Management Organizational Model Create Organizational Model) to a particular user?
Thanks and Regards,
Archana

Hi archana,
U can Create a role through Transaction PFCG.
Just create a role and assign the tcode PPOCA_CRM if u want to give the user just only this authorization otherwise u can select the menu list from sap menu and assign this role to that user.
Another way is if that user already exist in that system then just assign that particular transaction codr with that user.
Hope it will help u
Regards
Subhash

Cannot download revel.irplugin needed for LR5 Web

Cannot download revel.irplugin needed for LR5 Web. I click on 'Revel.Irplugin.zip' and nothing happens.
These are the instructions I'm referring to from: https://www.adoberevel.com/plugins/lightroom
Download the Revel Plug-in for Lightroom 5
Quickly and easily upload your images from Lightroom 5 to Adobe Revel. With Adobe Revel, share your work with friends and family and access your images from any device.
Windows install instructions:
Download and unzip Revel.lrplugin.zip
Launch Lightroom 5
Choose File -> Plug-in Manager...
Click the “Add” button
Navigate to the downloaded folder “Revel.lrplugin” and select it
The Adobe Revel plug-in will now appear in the list of plug-ins on the left side of the Plug-In Manager panel
Click “Done”
Adobe Revel will appear under “Publish Services” on the left side of Lightroom

I've just tried on both Mac and Windows. The download works fine. The zip file is only 37KB. So, it will download very fast. Have you checked your download folder to make sure that it isn't there?

Step by step guide of creation of WEB UI in SAP CRM

Hi Friends,
I am new in SAP CRM. I want to create a WEB UI in SAP CRM. Kindly share the link or documents.
Regards,
Narendra Goyal

First check documentation on the following wiki page: http://wiki.sdn.sap.com/wiki/display/CRM/CRMWebClientUIFramework.
If you want to buy a book that gives the whole overview, then here is one:
- link to sample: http://www.sap-press.de/download/dateien/1931/sappress_sap_crm_web_client.pdf
- link to bookshop: http://www.sap-press.com/products/SAP-CRM-Web-Client-Customizing-and-Development.html

What type of qustions i need to ask to client before sap fico prject start

what type of questions i need to ask to client before sap fico project starts
helo guys
i am new here as well i am fresher in sap FICO but my pm put me in project
soon i am going to my clients place
what type of questions i need to ask , before my sap fico project start
what type of data i need to prepare AS IS -TO BE & SAP FI/CO BLUEPRINT START.
GUYS PULL ME
PLS
REGARDS
SUBU

Hi Subu
Initially you need to prepare topics wise questions and in the process the data collection should be from 2 sources i.e. Primary - collecting information directly by interacting with the client and the other one is Secondary - from the documents that you collect from the client.
After formal introduction during the Kick off meeting never directly jump down to interact with the client you need to patiently observe the day to day business process of the client - department wise for the first few days. Do document all the observations that are made by you, this will help you to analyse the gap between the legacy system and std SAP Process.
The first and the foremost thing is that we need to see on what flatform all the business process relating to Accounting is maintained i.e the software used to store the legacy data.\
Now I will mention some of the important points that can be used a check list during your interaction with the client.
1.We are the consultants who need to freeze the Enterprise Structure first and later on the other module consultants will add their respective enterprise elements to the enterprise structure freezed by us. Therefore this process will by itself will take not less than 1 to 2 months. This process is the Typical phase where a lot of interaction/understanding/experience will come into limelight. So be attentive and observe the process throughly, once the Enterprise Structure is freezed and configured we cannot withdraw from the system.
2. Codification of the Enterprise Elements play a vital role do follow some naming convention. Here coding can be in 3 forms i.e. pure numeric, alfanumeric or pure alphabets.
3. Identify the chart of accounts that is maintained.
4. Grouping process of the GL Account According tos Schedule VI of Companies Act 1956
5. Customer & Vendor Grouping - payment terms maintained - Down payment if applicable - how the memos maintained.
6.. Collect all the documents relating to Procurement Process right from indent preparation to billing and followed by payment. This is very useful.
7. CIN plays a very important role regarding this we will have a seperate session in the days to come.
This is just a beginning and hope this will help you and as the time comes up do feel free to put up questions and I will clarify for the same.
Regards
Murali Kanth Natti

Looking for list of topics in sap crm

hi every one,
i was looking for list of topics in sap crm as i was entirely new to sap ..
so pls guide with links for getting documents related to the topics.
it would be nice, if i good glance about the topics and the documents related to it as soon as possible.
and let me know how far CRM would survey in the market ...

HI,
Start to research SAP CRM by WIKI:
http://wiki.sdn.sap.com/wiki/display/CRM/CustomerRelationshipManagement
Denis.

What is the major differences between SAP CRM 4.0 and SAP CRM 5.0?

Dear all,
Please let me know the major differences between CRM 4.0 and CRM 5.0 versions?
Your suggestions will be highly appreciated.
Thank you
Raghu ram

Hi Raghu,
In order to find out the differences between SAP CRM 4.0 and SAP CRM 5.0, you will find no better documentation than the release notes availalble at the following link:
[https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000429833&_SCENARIO=01100035870000000202&]
There are several functional improvements, and lot of new functionalites and also better integaration points with SAP ECC. Some of the new features like Visit Planning, Warrenty Claims, Enhanced and easy configurable/ customizable IC Webclient, New concept of Marketing Organization in Org Model. For further information, go through the release notes.
regards
Srikantan

Managing authorization for IC web client

Where can we find autorization objects used for the IC web client ?
- I cannot find any documentation on this topic.
- There's no transaction code and by the way no SU24 definition.
- Declaring the IC WEB BSP in transaction PFCG, no object are associated to the profil.
Tanguy

Due to our service center geographic organization we want to control acces from the country code of our custumer.
I got more information from the CRM security guide :
http://help.sap.com/saphelp_crm40sr1/helpdata/en/28/797b14a9cf4296b02742f641c18971/frameset.htm
And OSS note 675502 (No authorization for executing a PCUI BSP application)
I will test the following solution :
1- Add the shadow transaction BSP_CRMD_BUS2000116 in PFCG in order to get the BSP_APPL object
2- Add the transaction CRMD_ORDER & BP in order to control document usage from country code

Authorization for IC Web Client Profile

Dear Guru,
This is the first time I involve in IC Web Client
Project.
I would like to limit IC Web Client Profile. What is authorization object which I have to limit ?
Beside that, if users miss authorization in the web screen, what is user have to do ( in R3 we can order user to run /nsu53 or I run ST01 to trace ) ?
Pls advice.
Thanks,
SUGANDI

You can use SAP delivered roles
SAP_PCC_IC_AGENT
SAP_PCC_IC_MANAGER
SAP_PCC_CAMPAIGN_MANAGER.
Each of these roles have access to Interaction Center BSP application 'CRM_IC' as well as other PCUI applications used in IC Web Client.
Authorization object for BSP applications is 'BSP_APPL'.
Talk to your security person and ask him to assign these roles to the user who are going to use the application.
You can even customize these roles.
Thanks,
Thirumala.

A Web application + API for non web clients

Hi there,
I am new to the java enterprise world, i have a query regarding the application i am developing currently, I am not sure this is the exact category to ask this question but please help me on this.
In very simple terms my applications job is to give a listing or view of files distributed across network.
For this I need to have a webApp which can provide a view to all web clients. (where view is nothing but listing of files independent of there location)
Because this view tells nothing more than files , and i am as data center administrator cannot tell much about data, so we need to provide APIs so other applications (WebAPP or anything else)
can present the view in more data specific terms.
The webapp part is fine with me, but how do i support API being on an application server like glassfish.
Please help me on this.
Thanks in advance
AP

Dear all,
Anyone can help me to clear this problem ?

Are ERP Sales Orders supported for B2C Web Channel Scenario in CRM 7.0?

Hi Experts,
We are on CRM 7.0 with ECC 6.0 as backend system.
I just want to know whether the third party tax system (Vertex or Taxware) is mandatory for B2C WEB Channel implementation??
Without using a third party tax system, how can we configure tax for B2C web orders?
We have ERP sales order concept in 7.0. Will it support B2C scenario???
Regards,
vasu

Hi Ram,
-- Tax is configured in ECC using conditioni technique. They are not using any third party taxware/vertex system for this.
-- R/3 pricing procedure is intended to use for B2C transactions in Web channel and the pricing procedure refers to tax calculations. Even in B2c also they want to continue with the ECC pricing procedure.
-- The Requirement is to have pricing along with taxes and freight in the webshop, so that the consumers can pay the total amount using credit card as it is only the payment method available in the b2c Shop.
in the document "CAUSTAX_4.0" it was mentioned that use of third party system is mandatory for B2C scenarios. The relevant text is copied below.
As of CRM 3.1 and above, SAP provides a solution allowing you to use SAPu2019s jurisdictional tax method to calculate taxes.
Note: The use of external tax systems remains obligatory for B2C scenarios. However, if you are calculating tax in other scenarios and do not use external tax systems, this solution is applicable.
The solution consists of customizing changes in both R/3 and CRM. Even though you must make some changes in R/3, the basic process of calculating jurisdictional taxes remains the same. In CRM, the Transaction Tax Engine (TTE) calculates tax and you must configure it for the jurisdictional tax method.
My question is can we configure taxes in B2c shop using ECC pricing procedure? If yes, please provide the high level process steps.
thanks in advance
Srinivas
Edited by: Srini Sirasapalli on Jul 6, 2009 12:40 PM
Edited by: Srini Sirasapalli on Jul 6, 2009 12:42 PM

Authorizations needed for MAM 2.5 for RFC user and business users

Hello all,
We are using MAM 2.5 application but we are facing authorizations issues.
It seems we have not enough authorizations on RFC user used between middleware system and back-end system located on the RFC destination MAM on the middleware.
And we don't find any SAP document related to this customizing.
Moreover is there any other or same document deals with authorizations needed on the back-end for each user using MAM on its mobile device ?
Thank in advance,
Eric GOURDOU

Hello,
Can you send me the errors you have?
If you have a trusted connection, then each users need the authorization S_RFCACL .
Other than that, I never had to set any authorization for the plant maintenance scenarios of MAM.
Thank you,
Julien.
msc mobile Canada
http://www.msc-mobile.com

Web Services of SAP CRM ABAP 7.0 not show up

Hello Experts,
We are testing SAP CRM 7.0.
In T-cd:sproxy in CRM system, the Software Component Version SAP CRM ABAP 7.0 doesn't show up.
We'd like to see the web service definitions for CRM Service Processing,
but can't find them such as "ServiceOrderCRMCreateRequestConfirmation_In"(described in ES Workplace)
to create Service Order in T-cd:sproxy nor T-cd:SE80 Repository Information System>Enterprise Services>Service Definitions.
(We found the web service definitions of SAP CRM ABAP 5.1 there, but not SAP CRM ABAP 7.0)
The support package versions are as follows:
- SAP_ABA : SAPKA70106
- SAP_BASIS : SAPKB70106
- PI_BASIS : SAPK-70106INPIBASIS
- BBPCRM : SAPKU70006
Could you please advise us what's required to find Web Services SAP CRM ABAP 7.0?
Thank you in advance for your help.
Best regards,
F.T.

Hi,
You need to download SWCV "SAP CRM ABAP 7.0" in your CRM system from service market place. Also download PI content for SWCV: "SAP CRM ABAP 7.0" and import them in ESR.
Regards,
Gourav
PS: Similar questions are answered several time on this forum, so please do search before posting.
Edited by: Gourav Khare on Dec 13, 2010 11:56 AM

S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

Similar Messages

Maybe you are looking for