S8 touchpad getting clicked by itself
Hi, I have a s8 which is about 7 months old. I am facing a peculiar problem. Even if I am not using the tab, it keeps running as if someone is using the touchpad. By itself, it keeps opening various apps and start typing. It keeps registering inputs by itself. Not sure, if the touch screen has a defect Have no option but to shut it down. Extremely pissed off with this tab. Anyone having similar problem ? Amit
Hi Smitha,
in your action coding you call your EventHandler EmpRemove before showing the dialog:
wdThis.EmpRemove(wdEvent1,empid);
IWDConfirmationDialog dialog =wdComponentAPI.getWindowManager().createConfirmationWindow( Message, controllerInfo.findInEventHandlers("EmpRemove"), "Yes");
So remove the line "wdThis.EmpRemove(wdEvent1,empid);" and let the EventHandler do his work when the user confirms the deletion. Probably you should als check whether and how your ConsultantId is transfered as parameter. Think about removing it from the EventHandler and getting the selection straight out of the table.
HTH
Tina
Similar Messages
-
Hello, i have a HP HDX18 1180EP for several years and i need to say that is the worst HP equipment that i purchase.
Display problems, Overheat and issues with the touchbar over the keyboard were the main problems i had in this laptop, but passed with two big fans and disconecting the touchbar.
Now i have another issue with this machine, without warning the touchpad gets wild and start to left click everything.
Sometimes it stops for itself in few de minutes, other times i need to shut down the laptop and wait several hours, or in some cases i go to sleep and pray for the next day i have laptop to work.
I get this laptop brand new in the store when it came out and in that time was the expensive laptop at the store, so its f*king anoying all the troubles i get with it, i just want a laptop to work nothing more.
After this i would like to know how can i solve one more issue on this machine.
I have Windows 7 Ultimate SP1 with all official available HP drivers.
Thanks in advance.
(PS: Today its another day that i will sleep hoping that tomorrow i can work at the laptop)Hello @didig0,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the cursor on your notebook computer goes wild when interacting with the TouchPad, and I would be happy to help you!
To re-calibrate your TouchPad, I recommend following this document on Using and Configuring the TouchPad (Windows 7 and Vista). This should help stabilize the cursor when you are interacting with the TouchPad.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Thinkpad YOGA touchpad loud clicking noise.
I am quite happy with my Yoga and sensitivity of my touchpad, however the clicking sound is ridiculous, it is very loud and can be heard in the next room Someone already uploded a video showing it: http://youtu.be/XPJ7D96EAY8
I have tried new T440p, it has the same type of touchpad, but it is much much smoother and quiter.Yep, just want to throw in my agreement that the touchpad physical clicks are unusably loud. Both the upper buttons for the trackpoint and the lower buttons for the trackpad itself. Lenovo, PLEASE fix this in future versions. Or in this version.
-
I Have an iPad mini, iOS 8.1. When I'm on my iPad, it keeps going in and out of random apps. Going to settings is the worse. As soon as I click settings and it opens,it starts clicking different things and tries turning on and off settings! In Facebook, profiles and status get clicked. The screen zooms in and out multiple times. It reminds me of when you call the help desk for a computer or a computer at work and they gain access and move around clicking and you're doing nothing. Basically things are being clicked and I'm not doing it.....can anyone help?
At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
Here are the links, and the last one pertains to the reset to factory default condition ...
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
Hi all. I can't get "Click to Post" for Facebook or the share sheet icon for Facebook to work in 10.8.4. I've tried deleting and adding the Facebook account, and that doesn't seem to fix it. I also tried going to Activity Monitor and killing Notificaton Center. That didn't seem to solve the issue, either. Any other suggestions for how this might could be fixed?
I am facing the similar issues on my OSX 10.8.4, I have tried to delete and add the FB and twitter account back, but no luck. I also went to activity monitor and quit the notification, still no go. Looks like a bug issue. Any one aware of the fix, pls help. I really do not want to reinstall the OS.
-
How to turn off touchpad soft click in win7
How can I turn off touchpad soft click in win7. Thx
Welcome to the Apple Support Communities
Open Control Panel > Hardware and Sound > Boot Camp > Trackpad and disable that -
Get clicked column header not working
Here's what I'm trying to do:
Have a multi-column listbox of elements. Allow the user to select a few rows he is interrested in (and the become highlighted). Allow sorting of the listbox by clicking on the column headers.
I've got the listbox populating fine, if nothing is selected, the sorting works fine (event structure based on mouseup event of the multi-column listbox, calling to the "get clicked column header" invoke node method sorts the data. The part that is not working is that If the user has elements selected, sorts the listbox, the same elements are selected (not the same rows, but those same elements in whatever row they ended up after being sorted).
What happens is if I select a few rows in the listbox (listbox configured for 0-N elements selectable, highlight entire row), and then click on the column header, the event structure fires off a value change event for the listbox and changes to no elements selected. if I then click the column header again, it fires off the mouse up event and I get the sorting, but now none of the rows are selected. Weird thing is that first time I click the column header and it fires the value change event, a call into get clickced column header returns negative value so it won't tell me which column header the user clicked to "empty" the selection.
Bugger!!!! doesn't work how I want it to.
Funny thing is if I change the listbox over to a 1-N elements selectable, and then select a few rows, and then click on the column header, the event structure fires off the mouse up event and I get the sorting and re-selecting exactly as I would expect.
What's the deal here?? is this a bug, or expected behavior. If it's expected, it would be nice if it were a little more consistent between the different types of listboxes. Also, any good suggestions as to how to allow users to have 0-N selected elements, and be able to sort the listbox and keep the selected rows selected?Sounds annoying. Here is a variation of my goto method for these types of problems:
Use the MouseDown? event to catch important info like the old value.
Restore the old value at the end of the Mouse Up event.
Some details, like making sure that the down and up clicks are in the same cell.
Use Defer Updates to prevent flashing.
One of many kluges I have around for the MC Listbox....
Attachments:
MCListboxKluge.vi 20 KB -
Using Window 8 Pro with IE 10 but facing tremendous problem in LAN settings. Every 5 minutes, it automatically gets clicked on "Use a Proxy Server for the LAN" and am unable to open any page unless the said setting is unclicked. The same applies
while using Chrome or Firefox browsers.... none of the browsers behave properly and have to repeatedly unclick on proxy server settings (in IE or Chrome) and change settings on Firefox.
Any suggestions to get rid of this problem...??? ThanksHi,
It seemed that some malware changed your registry which make proxy server enabled.
Did you install any proxy agent software recently? If you did, please try uninstalling it now. And then make a full scan
with malware removal tool.
http://www.microsoft.com/security/pc-security/malware-removal.aspx
Or locate to registry,
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings, set "ProxyEnable" = dword:00000000.
For more information, you can refer to
http://support.microsoft.com/kb/819961
Andy Altmann
TechNet Community Support -
Play motion tween until other button gets clicked
I want to make an animation where a person dances: there are 4 buttons and when one button gets clicked, the person starts and loops a specific motion tween. I already have everything, until now only a picture is shown on click:
function clickSpecialMove(event:Event):void {
! trace("SpecialMove");
! gotoAndStop("SpecialMove");
BeHappy.addEventListener(MouseEvent.CLICK, clickBeHappy);
function clickBeHappy(event:Event):void {
trace("BeHappy");
gotoAndStop("BeHappy");
Twinkle.addEventListener(MouseEvent.CLICK, clickTwinkle);
function clickTwinkle(event:Event):void {
! trace("Twinkle");
! gotoAndStop("Twinkle");
HandsUp.addEventListener(MouseEvent.CLICK, clickHandsUp);
function clickHandsUp(event:Event):void {
! trace("HandsUp");
! gotoAndStop("HandsUp");
but I wan't a motion tween to play:
gotoAndPlay("motionTwinkle"); does not work, then all motion tweens just walkr through like in a film :...can anybody help me? that would be so nice thank you!How do you implement the animations? What makes the animation loop? For all of the code you show you only have gotoAndStop() commands. What do those have to do with the gotoAndPlay() you mention? Why do you have exclamation marks leading several lines - remove those if they are actually in your code?
-
Laptop hp pavilion dr clicks by itself
My hp pavilion dr is starting to click by itself, even in the sleep mode...What can I do to fix it?
Hello Caninecatfish,
I understand you state that your computer is making a clicking noise, is that correct? I will try to help you with this issue.
The first thing you need to do is find the location of the noise. You can remove the side panel and turn the computer and try to verify the location of the clicking noise. Here is a document that will show you how to remove the side panel.
Respond when you can.
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
My ipod touch get restart by itself and just get stuck with the apple logo, What can i do?
my ipod touch get restart by itself, and just get stuck with the apple logo, What can i do?
Try connecting it to your iTunes library in recovery mode using the instructions in this Apple support document.
http://support.apple.com/kb/ht1808
Otherwise, try connecting in DFU mode.
http://www.iclarified.com/entry/index.php?enid=1034
B-rock -
Ipad 2 touchscreen always move and click by itself
i have problem with my ipad 2
its always move and click by itself on the screen and always typing
how suppose i do?
does it need repair? how much it cost?Hey There fazamrh,
If the touchscreen on your iPad is unresponsive, try the steps in this article to address the issue:
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
https://support.apple.com/en-us/HT201406
Have a good day,
- Judy -
Is there a fix for the touchpad right click???
It is probably an intern engineering failure but the touchpad on my brand new notebook is complete junk.
I disabled every possible feature, uninstalled all the HP bloatware and STILL I have to click a gazzilion times in the far right corner of the touchpad to achieve a valid right-click.
I don't know how an engineering crew could fail this bad, but they completely phucked up on this one.Hello @TSGarp,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the touchpad on your notebook is not working, and I would be happy to assist you!
Since you mentioned that your computer is brand new, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Touchpad keep on rebooting itself automatically...
No device
was it a software or hardware problem? how can i get it fix? technically HP technicians itself cannot fix it. for several months my unit beens travelling in and out of there repair warehouse and still not fix.Without knowing what has been done to it, and what software is installed, it's extremely hard to diagnose a device from this side of your computer screen!
Have you tried creating a new webOS account for the device after erasing it? That way, if the problem is buried in the collection of software you have, it won't return.
Tried running the webOS doctor to reflash the ROM?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
IMac, 10.9.4., spacebar "clicked" by itself.
I have a 21.5-inch iMac, Mid 2010 with 10.9.4. After performing the latest OS update, the spacebar seems to be pressed by itself whether I have a keyboard connected or not. This means that the spacebar stays pressed at all times. I have verified this using the keyboard viewer where it shows the spacebar pressed at all times. I have bought a new keyboard and I have even deleted my partition and reinstalled the Mavericks but it still functions the same way. Please advise.
Thanks in advanceI had unpaired the old keyboard. And that was exactly what I was getting.
I found a solution and it was, in fact, to disconnect, surprisingly, the mouse. I was using a random 5$ mouse, which, for some reason forced the spacebar to be clicked. I have no idea how that happened, but as soon as I disconnected it, it stopped happening. I replaced it with another mouse and all worked just fine.
Thanks anyway.
Maybe you are looking for
-
i already authorize my computer but still it cannot sync my apps purchases because it says to authorize my computer all over again
-
ADF BC declarative Compare validator on date attributes
Hello I trying to abandone validation on the UI beans by resorting to the built-in ADF declarative validation available at the Entity object level. I test the Compare validator between two numeric attributes and it worked well, also between two Strin
-
My iPad 2 has been constantly getting stuck on apps and it won't go home when the home button is being pressed. The only way I can get off the apps is if I restart the iPad, which is a pain... Could this be an ios problem? I'm currently running 5.0.1
-
SMS appears as a Network Notification message
After loading the 4.5.0 version software in my Blackberry Curve (8310), I am facing a typical problem of my SMS being received as a Network Notification message by the Recipients. With this, in Nokia phones the message prompts for Save or Delete opti
-
Why is my current balance $312?!!!!
well i opened two phone lines(smartphones) which are one for me and one for my dad on March 2nd 2013 in California and we are using a Share Everything Plan. however, after two weeks which is March 16th 2013, our phone plan cycle suddenly ended, and s