Safari tries to connect to a hotel wifi even though we are not at the hotel the wifi is not listed in settings
safari tries to connect to a hotel wifi even though we are not at the hotel. the wifi is not listed in settings
Yes... tap Settings / Wi Fi
Similar Messages
-
My IPad connects with my hotel wifi, but does not indicate that it is a secure wifi, even though it requires a password to access - no lock symbol appears against the wifi network, hence no password request, hence no internet access - help. My collegue who also has an Ipad can access the same wifi with ease, so it must be something to do with the settings on my machine, although checking the two machines, there appears to be no difference in the settings.
My experience with hotel wifi is that it's an open, and unsecured, connection, but unless you agree to their terms on a launch page, you can't go any further or connect. Sometimes I need to force safari to come up and even make it go to a page, to trigger the auto load of the 'agree to our terms' page.
Unless your machine is work provided so maybe could be blocked from unsecured net access? -
My daughter stopped using her iPad when she got an iPhone for Christmas. It has been over one month and she has forgotten her passcode. I tried to wipe it via Find my iPhone but it won't connect to the wifi even though wifi is switched on on the lock screen. I then tried to restore it through iTunes but was unable to becuase Find my iPhine was switched on so I removed the iPad from the device list only to find that it didn't solve anything with the iTunes situation and it still won't connect to the wifi. I ahve tried turning wifi on and off, tried leaving the house and re-entering all to no avail. Is there any other way to restore the iPad????
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method. iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'. How do I fix this issue??
iOS: Troubleshooting Personal Hotspot - Apple Support
-
My iphone wont connect to my home wifi even though it says it is. My iPad works fine on the same setting. Confused?
What is the iOS of the iPad, and what is the iOS of the iPhone 5?
Also, have you tried this article: http://support.apple.com/kb/TS1398 ? -
My brand new iphone5 will not connect to my home wifi even though it recognizes it. My ipad and my old iphone4s connect with no problem. Any thoughts?
Although your other devices connect okay, it would be worth resetting your router by switching if off for disconnecting it from mains power for 2 minutes and then switch it on again.
Good luck and do report back. -
My computer died, so trying to connect my phone on a new computer and download all my music to the new computer/itunes?
The iphone is not a storage/backup device. The sync is oen way - computer to iphone. The only exception is itunes purchases. File>Devices>Transfer Purhases
Copy everything from your backup copy of your old computer to your new one. -
Even though there are over 200 photos on my ipad, after trying both methods of importing and connecting with a lead, a message appears saying that there are no photos on this device. Any ideas?
Did you connect your iPad to your computer then open the application on your computer that transfers photos from a camera? Your computer should recognize the iPad as a camera. All photos in the Camera Roll on the iPad should then be seen and you should be able to copy them to the computer using that application.
Photos that were synced to your iPad by connecting to your syncing computer cannot be copied back this way as the master file for those photos are on the syncing computer. -
my ipad wont accept any passwords, i am unable to connect to my wifi even though my password is correct and other laptops etc have no problem connecting.
The ipad can find my wifi connection but just wont accept the password. connected with no problem in the Apple store.
any suggestions,
thanks.Does the iPad connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I have just downloaded ios7 and have lost all use of my iMessage I have reset all my settings but still nothing. I have entered my apple ID as requested but keep getting a message saying cannot sign in network connection error try again later even though I have full phone and wifi signals. Please help
Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).
Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?
-
My itouch isnt connecting to wifi even though my wifi has 3 bars
i've been having trouble with my itouch lately. its been unable to connect to wifi even though i have a strong signal of 3 bars and have been using the wifi for about a year now. but just recently anytime i try to join my wifi it says "unable to join "linksys"
please helpHere's the basic WiFi repair steps:
1. Reboot your router (unplug the power cord)
2. Reset the touch network settings - tap Settings > General > Reset > Reset Network Settings
3. When your touch restarts, tap Settings > WiFi > Other. Re-enter your network name, security, and network password.
If you still have problems and appear to be logged in, tap Settings > WiFi > and then the blue ">" next to your network name. You should have a device IP, Subnet mask, router IP, and DNS IP. If you device IP starts with 169.x.x.x then you have a bit more work to do. Write back. -
I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.
The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11 -
TS1398 My new iphone 5c wont use my wifi even though it shows I am connected
My new iphone 5c will not use my home wifi even though it shows I am connected in my settings. I was able to use my home wifi from my old phone with older software. How do I use my wifi from home. The home screen does not indicate I am connected to wifi. Thanks
Restart your WiFi router by removing power for 30 seconds.
Use Settings > General > Reset > Reset Network Settings on your iPhone 5c.
Attempt to connect.
If you are still having WiFi problems it is necessary to isolate whether the problem is with your network or your iPhone. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPhone on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPhone does not function well on other networks it possibly has a hardware problem. Contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPhone is bad.
See also here: http://www.apple.com/support/iphone/wifi/ -
My apple Tv will not airplay, this is the 3rd one i have exchanged and my devices airplay just fine elsewhere, could there be a problem with the wifi even though all of the other functions are working fine?
Hello there, AntRambo.
The following Knowledge Base articles may provides some steps to go over for troubleshooting your issue:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
And also the following:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Particularly but not exclusively of note:
If the AirPlay icon doesn't appear
Ensure that you have followed the steps in using AirPlay and AirPlay Mirroring.
If you are still unable to see the AirPlay icon , try one of the following steps:
If trying to AirPlay, or AirPlay mirror, to your Apple TV, ensure that AirPlay is enabled on your Apple TV as well. You can enable or disable AirPlay on Apple TV in the AirPlay menu: Settings > AirPlay.
Check Internet or network connectivity on all affected devices. Some content requires an Internet connection to authorize content playback. AirPlay capabilities may be limited if your network is not connected to the Internet.
If attempting to use AirPlay from a third-party app or a website from your Safari app on your iOS device, confirm that the app or website is AirPlay compatible (refer to the developers of the app or website for additional information).
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro
Maybe you are looking for
-
Nested EJB QL Query in Entity Bean
Hi All We are using CMP based Entity bean which has name <i>EmployeeBean</i> with a field pSALARY. We want a finder method which return an employee with maximum salary. we are using following Query. <b>select object(b) from EmployeeBean b where
-
LC credit release through vkm3
Dear Brothers, My LC document is worth 5 millions ,after reaching that amount the sales orders are gettings blocked,BUt once a new sales order is created suppose for 5.5 million it is blocking me at the delivery note creation level which is correct,
-
Can we call multiple Smartforms from single Driver Prog?
Hi all, Can we call multiple smartforms from single Driver Program. Here Driver program is custom Program. I want to give Print Parameter only once and output should get printed one after the another smartform in same order of smarforms were called.
-
Drill Down and Free characteristics.
Hi Gurus, If i want to Drill down according say OCALDAY,OCALMONTH, Do i have to add those fields in the Free characteristics Right?. Or is there any other we can add the fields to the Drill Down. Thanks in Advance.
-
Question about GenIL programming for CRM 7.0
Hi All, I am confused in GenIL programming in CRM 7.0, pls help. 1 Why there are 2 methods related to object method execution u201CIF_GENIL_APPL_INTLAYEXECUTE_OBJECT_METHODu201D and u201CIF_GENIL_APPL_INTLAYEXECUTE_OBJECT_METHOD2u201D, as I debugged,