SALERT_CREATE -custom alert creation for validation
Hi,
I have done one scenario,in which i have used the custom alert creation calling the SALERT_CREATE function module from my udf.That is doing fine but now i have an understanding problem that, in the udf we need to use one RFC receiver comm channel,what is the use of that.As the function module we access is already present in PI server itself.
In case of RFC lookup when we access RFCs from remote server there we need one RFC receiver comm channel..that is valid but why in this case.
Can anyone please clarify me.
Cheers,
Abhishek.
Solved itself.
Similar Messages
-
Hi Experts,
We have requirement to create a custom alert same as 7059. After that deactivate the standard alert 7059.
We have reference document to create alert provided by SAP. While custome alert creation, we have to need to do some changes in BADI /SCA/ORDER of method Before_Alert_Create.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80b31362-7806-2d10-84a0-d2886880c282?QuickLink=index&overridelayout=true
We would like to what kind of changes to be done in BADI inorder to work with custom alerts.
Could you please help me out to proceed with custom alerts and it is quite urgent.
Regards
gsankarHi Gowri,
Did u get any further details on this? We also want to create a new custom alert and trying to figure out what coding is needed to be done.
Thanks and Regards,
Amjad -
PI 7.11 - Alert creation for RFC Exceptions does not work
Hi folks!
In our PI 7.11 SP04 system we have created an Alert Category as well as an Alert Rule to be informed about errorneous messages in the Integration Engine (ABAP).
The scenario is synchronous SOAP Axis to sRFC, where the RFC answers with an exception that is transferred to a SOAP Fault response message.
Now we see messages with Application Errors in the Integration Engine, but no alert is created. Having a look at the alert creation log using report SXMSALERT_LOGREADER shows us that the system even does not try to create an alert for these messages. Alerts are only created for errors in the Adapter Engine.
Question:
Why does the system not create alerts in this case and how can we achieve this?
Thanx for any hint!
Kind Regards,
VolkerHi!
Additional information for all:
When forcing an error like "receiver not found" both kinds of alerts are created: AE Alert and IE Alert. Thus in general the alert configuration and the alert rule for IE errors are correct and working - only not for RFC exceptions ....
Regards,
Volker -
Custom ALERT TONE for iphone need HELP please.
I understand how to create a custom TONE as an M4R file and import into itunes into the TONES library.
When i sync my TONES to my iPhone, it lists as a RING tone.
My custom ring tones, which are approximately 10 sec long work just fine when set as my RING tone for incoming calls.
HOWEVER ....
What i am DESPERATELY trying to do is create a custom ALERT tone and have it LIST as an ALERT tone in my phone and NOT a ring tone. Seems custom tones do not work for sms alerts.
I searched EVERYWHERE and can not seem to find an answer. I realize apple wants us all to BUY alert tones, but i should be able to create my own too no?
I created some custom alert tones, approximately 1 sec long each. Converted them to M4R files and sync'd them to my phone.
In my phone they appear under the RING TONES list and not ALERT TONES.
Maybe this dosent matter, however, when i try to set my TEXT ALERT SOUND to one of my custom ALERT tones, they do NOT work. My text messages come in without playing the sound.
Can ANYONE PLEASE HELP ME figure out how to properly create a TONE as an ALERT TONE for my iphone?
HUGE THANKS to ANYONE that can help.I've never been able to assign custom tones under alerts. It doesn't matter though as you can assign ringtones as alerts as of iOS 5 I believe. I had a similar issue with silent alerts, sometimes they would play, other times theywouldn't, but they would always play when selecting them under settings. Resetting all settings (not content) has so far fixed that issue for me. Try resetting your settings after you've synced your tones.
-
Custom Error Message for Validation.....
Here is my Validation:
I want the error which is grown from what is wrong on the page to display after the validation.
the GUI for validation will not let me leave the Validation ERROR box empty...just not sure how to get around this.
DECLARE
isValid BOOLEAN := TRUE;
message VARCHAR2(4000):='';
BEGIN
if (:P14_EXISTING_METRIC_NAME IS NULL and :P14_METRIC_NAME IS NULL)
then
message := 'Metric Name is Not Chosen:';
isValid := FALSE;
end if;
if (:P14_EXISTING_SUB_VALUE IS NULL and :P14_METRIC_SUBNAME IS NULL)
then
message := message || ' Sub Metric Name is Not Chosen:';
isValid := FALSE;
end if;
if NOT REGEXP_LIKE(:P14_METRIC_VALUE,'expression')
then
message := message || ' Value is not Numeric:';
isValid := FALSE;
end if;
if NOT isValid
then
raise_application_error (-20001,message);
end if;
END;Edited by: bostonmacosx on Feb 27, 2013 12:05 PMSO what I did was make sure that the process doesn't go false:
and at the end just checked my messages and added an error on the end. WHEW hope this helps someone in the future.
DECLARE
isValid BOOLEAN := TRUE;
message VARCHAR2(4000):=NULL;
BEGIN
if (:P14_EXISTING_METRIC_NAME IS NULL and :P14_METRIC_NAME IS NULL)
then
message := 'Metric Name is Not Chosen<BR>';
end if;
if (:P14_EXISTING_SUB_VALUE IS NULL and :P14_METRIC_SUBNAME IS NULL)
then
message := message || ' Sub Metric Name is Not Chosen<BR>';
end if;
if (NOT REGEXP_LIKE(:P14_METRIC_VALUE,'^(\d{1,99})\.(\d{0,99})$') or :P14_METRIC_VALUE IS NULL)
then
message := message || ' Value is not Numeric<BR>';
end if;
if message IS NOT NULL
then
apex_error.add_error (
p_message => message,
p_display_location => apex_error.c_inline_in_notification );
end if;
END;Edited by: bostonmacosx on Feb 27, 2013 12:52 PM -
Alert Creation for CRM 5.0 web client
Hi All,
I want to create an alert after each 2hrs interval from the service complaint creation start time with message " time to call this Mr X" in CRM 5.0 IC webclient for the complaint which are with Staus as 'Open' and 'In Progress' ( not 'Closed').
Please give suggestions and steps for that.
ThanksHi Friend,
I am new to CRM WEB CLIENT. I have created crm_ic (IC Webclient) welcome screen. In that screen there are fields to enter data by the customer advisor like Name, Address, Post code and Reference no. etc., All the fields allow me to enter data in the represented text boxes. But Reference no. not allow me to enter anything in it. Can you pls. help why and how to solve it. And also I want to retrieve this in to my crmd_order(Transaction Processing) screen.
Many thanks,
shrik. -
URGENT help required : Custom Authentication Plugin for validation of users
Hi Experts.
I'm a newbie and am stuck in middle of nowhere.
I have been asked to develop a custom authentication plug-in which would validate a user using the attributes such as a userid and a shared-userid.
shared-userid is just a custom id that would be generated on the basis of some logic.
Currently I'm using OAM 10.1.4.3.0 on WINDOWS server and as everybody, I'm also not able to find any sample files or sample folder structure.
As per one of the other threads https://forums.oracle.com/forums/thread.jspa?messageID=3838474, sample code and sample folders are removed from this particular version and were present in some previous version.
So, can anyone please help me out with the following:
1. How can I proceed to accomplish this task, i.e. to check whether a user-id and a shared-userid both are validated and a user is granted access.
2. Are all of these files required to create a custom authentication plug-in or can we proceed only with the ".c" file (i.e. make file, authn.c, and a dll file made using the make file and .c file)
3. Can anybody provide me with a sample file or a sample code written in "C" wherein the plug-in connects to the LDAP and searches for a particular dn for comparison or something. Also a sample make file for windows to convert the .c file to .dll.
PLEASEEEE help me ASAP.
Regards
Edited by: 805912 on Nov 15, 2011 7:18 PMHi,
Regarding question 2, you also need the header file is supplied in the Access Server installation directory, under ...access\oblix\sdk\authn_api and is called authn_api.h. you need this to build the dll which must then be placed in the Access Server's ...\access\oblix\lib directory.
Regarding question 3, if you install an earlier version of the Access Server, ie 10.1.4.2 or less, then you will get a \access\oblix\sdk\authentication\samples\authn_api directory that contains a basic sample authentication plugin. However, there is still documented in the 10.1.4.3 Developer Guide another sample plugin, simplapi.c, in the 10.1.4.3 Developer Guide with instructions on how to use it. It does work, but unfortunately requires a couple of edits to get it working after copy&pasting it (no code changes, just fairly obvious case changes eg changing ObanPlugin* to ObAnPlugin*). I used the following commands to get it to compile into a .so file on unix:
g++44 -c -fPIC -Wno-deprecated -m32 simpleapi.c
g++44 -shared -nostdlib -lc -m32 simpleapi.o -o simpleapi.so
but I really would not know if or how these translate into a Windows environment.
Regards,
Colin
Edited by: ColinPurdon on Nov 15, 2011 2:50 PM -
Create a custom alert message for my publishing site
I have enabled outgoing email to enable sending alerts from SharePoint to users. But I want to have a simpler alert email. Where I do not need to include the item content within the email . so I am trying to achieve the following:-
Remove the item content from the alert email and just include a link to the item such as a link to a wiki page, announcement item ,etc.
Currently the link will include the servername in it such as
http://servernameSP01/sharepoint/Page1 . But we have defined a DNS name so that out SharePoint is accessible using a more user friendly such as
http://ourcompany.intra. So is there a way to include this instead of the server name in the email links?
ThanksHi,
For the first question, my understanding is that you want to add a link to the email alert. As there is no OOTB feature to achieve it, I suggest you custom
the alert template to achieve it.
The email alert template is in the folder below.
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\XML
Before editing the xml, remember to copy the xml file to another location. You can edit the format tag of the xml and add your custom link to the format
tag.
Save the xml and update the list alert template to the new one.
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/084b466f-8add-48e1-ac3a-8094ce3ec2c2/how-i-can-add-attachment-link-in-alert-email
More information:
How to customize alert email template:
http://www.alectang.com/blog/archive/2012/05/16/how-to-customise-sharepoint-alert-email-template.aspx
AlertTemplates Schema:
http://msdn.microsoft.com/en-us/library/office/bb802961(v=office.15).aspx
For the second question, my understanding is you want to replace the server name link with a DNS link. It could be achieved using alternate access mappings.
More Reference:
http://technet.microsoft.com/en-us/library/cc263208(v=office.15).aspx
http://blog.blksthl.com/2012/12/03/a-guide-to-alternate-access-mappings-basics-in-sharepoint-2013/
Best regards,
Zhengyu Guo
Zhengyu Guo
TechNet Community Support -
Jquery customizing dialogue box for validations messages,
Hi everyone,
I create a new template label with this script:
<script type="text/javascript">
$('#errdialog').find('ul').append($('<li/>',{text:'#ERROR_MESSAGE#'}));
</script>
I'm using this function to create a
dialogue box on my apex application:
Page HTML header
<script type="text/javascript">
$(function(){
if($('#errdialog').find('li').length>0){
$('#errdialog').dialog({
modal:true,resizable:false,
buttons:{"Ok":function(){$(this).dialog("close")}}
</script>
And this html code in Page Header Text:
<div id="errdialog" title="Validation Error !" style="display:none"><ul/></div>
What I would like to do is to customize this dialogue box.
For instance in my app the box background it's gray, it's text are black,
and the upper banner it's a darker gray. I would like to be able to change
it all and put a html button as an ok to close the box.
Edited by: 907910 on 29/02/2012 15:10Thanks, Scott for the material, the problem is
that I know very little about html css and jquery,
and I have to end my apex application by monday.
I've already look into the documentation, but I can't
modify my dialog box.
Can you give me a example how to customize the dialog box? -
Custom Jar creation for SIM customizations
Hi,
Can anyone tell me how to create a custom jar for SIM customizations
( which has been done by using extension methodology ) and where to put it so the custom code is picked up first rather than the base code.
Thanks,
Susmitasim-1311-impg1.pdf says:
Build/Packaging/Deployment Related
To build and deploy the customizations correctly, make a separate project for
custom-modified code. Make sure any existing Java files that are going to be altered
have the exact same class structure as the base code within this new project. New or
additional Java files might have a class structure that makes sense for the new code.
Build a custom JAR with the modified or newly created code. This custom JAR should
be placed first in the execution classpath so that classes found within the JAR are
chosen by the JVM rather than the base classes. This will require unsigning and
resigning all the JARs in the SIM-client application, since all JARs must be signed with
the same signature for Web Start to work correctly. Consult the jarsigner
documentation from Sun for further information on the JAR unsigning/signing
process.
Hope this helps,
Best regards,
Erik Ykema -
Customer attributes creation for interface scenario ?
Hi Experts,
I want to create customer attributes in the interface scenario in dswp transaction.
I was able to create one using the SPRO transaction. but it does not allow me to add further.
Can anyone tell me how to resolve this or give any useful blogs, as i am a beginner.
Thanks,
Shamly
Edited by: Shamly MM on Jun 9, 2010 10:10 AMHi,
Are you looking for Application Monitors and Customer exits for your requirement. May be this [guide|https://websmp110.sap-ag.de/~sapdownload/011000358700006184412006E/Setup_Guide-Customer_Exit.pdf] can help you.
Hope this helps.
Regards,
Jagan -
The old method doesn't seem to work.
How do I create a custom alert sound for ical on my mac????Hi,
Depending from your Role, for Exmample IC Manager:
-> Process Modeling
First Step for Creating the Alert:
-> Create Alert
-> New
Second Step:
-> Create Rule Polici
There you define the Conditions and the Actions
so the Alert is coming up the IC. You can test it and have to release it.
Read C78 CRM Interaction Center Building Block Configuration Guide;
there you will find an easy example an Page 59.
Andreas -
Customized Alert using 'Validation'
Dear Experts,
I am configuring somecustomized alerts to be sent to Supplier. These alerts are related to any change in Schedule Agreement.
Current setup:
· Alerts are active for New SA creation (default 0023) and also when updating SA, we are getting alerts in Alert monitor for all the Release numbers but under alert type 7034 (exception validation for SA)
Requirement:
Alerts need to get generated only if the Schedule Line is in Firm Zone and not in Forecast
for e.g.
A new schedule line appears in the Firm Period (2 different cases : a Forecast schedule line has become firm, or a totally new schedule line has been added)
A schedule line in the Firm Period has been deleted not due to goods receipt complete
An existing schedule line quantity or Del. Date has been modified and,
After a Goods Reception has been completed, the received schedule lines are deleted from the portal on the reception of the new release. This functional case must not generate an alert.
Work done:
I have created a customized Alert type 9070. Under Release and also activated the same with all other functional configuration. This alert code is also visible in SNC supplier View (alert Monitor), though failing to categorized the generated alerts under 9070.
Dear Experts may I get some help on how I can make these alerts to get generated and sent under 9070?
I am not aware if we can use other two methods (PPF n Reporting), if so how?Hi MJ,
this si more specific requirement and my client dont want too many alerts and hance done wanna use Standard 0023 or 24 but we have created a customized Alert Type 9070 and assigned it to Type "Release"
though I can see th new customised Alert 9070 in alert monitor search option but if i am searching by Selecting "Release" i am not getting 9070 in the list.
i saw there is a BAdi Implemented SCMB/BOL_VALFRMWR which is calling method "VALIDATE"
but some how it is not working for my Customized Alert 9070. I am looking for some techinical (ABAP) help for the required customization int he implimented BAdI -
Hi Guys,
We have created a custom package where in we are trying to call the standard API's of Oracle projects i.e PA_PROJECT_PUB.When we are trying to call these APIs we are facing the below issue.
We have tried testing in two instances ,Initially it worked in both instances.
Using the same API's multiple times we tested the same data set in these instances.
For the first few runs it works fine.But when we go on using the same API's again and again for our testing we face now and then the below issue.
Standard API's
=========
add_task
update_project
change_structure_status
create_draft_plan
Error:
ORA-20100: File o2670336.tmp creation for FND_FILE failed.You will find more information on the cause of the error in request log. in Package PA_OPPORTUNITY_MGT_PVT Procedure modify_project_attributes ORA-20100: File o2670336.tmp creation for FND_FILE failed.
You will find more information on the cause of the error in request log. in Package PA_PROJECT_PUB Procedure update_project:ORA-0000: normal, successful completionError while publishing the task
Please let us know if anyone of has come across the same situation.
Regards,
VijayBut have issue only with validating invoice batch. I followed metalink ID's 605542.1, 167990.1,261693.1,1088553.1,749491.1, 461271.1 and few more.Was this working before? If yes, any changes have been done recently?
Please see if these docs help.
APXAPRVL: Invoice Validation Errors With MSG-00001 and REP-1419 [ID 333305.1]
Invoice Validation Errors When Others:101505:Non-Oracle Exception Rep-1419 [ID 464125.1]
Invoice Validation Fails with REP-1419 Error in Ap_approval_matched_pkg.Execute_matched_checks [ID 293425.1]
Invoice Validation Failing On Fnd_file Could Not Write To File L0202306.Tmp [ID 461520.1]
Invoice Validation (APPRVL) Errors ORA-20001 APP-SQLAP-10000 PSA_FUNDS_CONTROL_PKG.glxfck [ID 463184.1]
Validate Invoice Error With ORA-20001: APP-SQLAP-10000: AP_FUNDS_CONTROL_PKG.Calc_QV [ID 432702.1]
Invoice Validation Program Is Erroring Out [ID 382844.1]
Error On Validation Of Invoices From Previous Periods [ID 412814.1]
Thanks,
Hussein -
Default Alert Consumer for Custom job
Hi Experts,
can we use the "ALERT-TO-MAIL" alert consumer to a custom job.
If not why cant we apply the default alert consumer to custom job and what could be the relation between them.
here i am trying to create an custom job in SAP PI 7.3 server basing on Customize Alerts Using Job in PI 7.31/PO as in here creation of the Alert consumer details has not been provided i was thinking to use the "ALERT-TO-MAIL" consumer and i also want to know the process to create the customized alert consumer so please help me in this issue. Thanks very much in advance.
Regards,
AvinashHi
PFB the blog for creating custom consumer.
Michal's PI tips: Component based message alerting - API
Also a blog on creating custom job, might be helpful to you
Customize Alerts Using Job in PI 7.31/PO
Regards
Osman
Message was edited by: Osman Jabri
Maybe you are looking for
-
Prefixed index vs. Non-prefixed Index. Which is faster?
If you have a partitioned table, which type index (prefix or non-prefix) would benefit most performance wise?
-
Hi, After dropping a couple of tables, the system does not free up hard disk space. How can I resolved this issue ? kindly advise. thanks. andrew
-
What is the definition of "All Projects" in P6 EPPM for the Team Usage Charts?
In P6 Professional 8.3, there is a User Preference setting which can be used to define "All Projects" for the Resource Usage Profile. The choices are: All Open, All Closed except What-if, All Closed with Leveling Priority over x. In P6 EPPM 8.3, ther
-
How do I get the scanner working on my Officejet 4500? I am working with an Apple MacBook Air
It took me hours to get the printer connected to my MacBook Air and my MacBook Pro. It now prints wirelessly. Great. I now cant get the scanner working. What do I need to do? Please walk me through. Also, is it complicated to get it to photocopy
-
Mail Receipient to be determined dynamically
HI All, I have a requirement where i have to send a mail to user depending on the plant. So i have created a custom background method to determine the agent for the mail based on the plant. Then i am passing this as a expression to mail. I mean i am