Sales Employee Description is not following into COPA

Dear Experts
I have set sales employee as a characteristic in my operating concern that was triggered from PAPARTNER. From there I developed then run COPA report painter (KE30) for sales employee with ALV display options. In fact the report can only display sales employee code, without the description. I desperately need sales employee description in my report, based on user requirement.
Here we didn't activate HR module. In the same time SD has defined Sales Employee as Partner Function (SE) in customer master data. The Partner Function is looked up the sales employee name from HR table, PA0001 so that they can display sales employee code and name in the customer master data.
From the story above I've tried to do some ways, such as:
Changed display options from ALV to Drilldown -> with this way, sales employee description can appear from the report, but actually I just need the ALV report because of my client didn't accept the report layout except ALV. This is my big problem.
   2.  I found other threads with similar problem with me, then I tried to follow that instructions that will be described below:
I tried to create new char WW100 with PARVW table for sales employee then follow these steps:
Create 2 derivation rules in KEDR  using table look up (table VBPA) for the same partner function
1. In one Der Rule, make the sale order item KDPOS as constant value 0000
2. In the other one, dont make it a constant....Leave it as it is
DERIVATION RULE 1
SOURCE FIELDS
VBPA-VBELN = COPA-KAUFN
VBPA-POSNR = COPA-KDPOS
VBPA-PARVW = GLOBAL-USERTEMP1 (Click on Magnifying lens.. Specify Constant = Your SD Part Function)
TARGET FIELDS
VBPA-KUNNR = COPA-WW100
DERIVATION RULE 2
SOURCE FIELDS
VBPA-VBELN = COPA-KAUFN
VBPA-POSNR = COPA-KDPOS  (Click on Magnifying lens.. Specify Constant = 0000)
VBPA-PARVW = GLOBAL-USERTEMP1 (Click on Magnifying lens.. Specify Constant = Your SD Part Function)
TARGET FIELDS
VBPA-KUNNR = COPA-WW100
Unfortunately the ways above still can't solve my problem, the report still only show the sales employee code without description. At the last whether possible if i want sales employee characteristic with origin table coming from PA0001, so that data will derive from HR table? or perhaps any other solution to solve my case?
Please suggest me in detail..
Thanks a lot
Regards,
Maradona

Hi Maradona,
I want a clarification - Does the value flow properly to the value field and only the description is not coming?
1. If the value flow is proper and only description is a problem, then check whether compunding has been used in KEA5 for the characteristc WW100? If yes, check the text table for WW100 and compare it with the origin table in terms of the fields in both the tables.
(My guess is that not all the compunding characteristics are available in text table)
2. If value flow is a problem, then compare SE16 and SE16N for any sales order for the denotion of partner function field PARVW. Sometimes the denotion of partner function (two character code) may vary in SE16 and SE16n.
Get back for any more query
BR
Abhi

Similar Messages

  • Revenue values are not flowing into COPA

    Dear Experts,
             We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
    May I know the exact reasonu2026.
    Please suggest me in right wayu2026.
    Regards,
    Balaji Bhonsle.

    Hi Balaji bhau
    I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
    See if the Billing Type has been entered in KE4W and the VF reset for it
    Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
    br, Ajay M

  • Showing Monthly Sales Analysis for Sales Employees (including credit notes)

    Hi Experts,
    I want to show a report for my director so we can accurately decide upon sales targets for each sales employee for 2012.
    The Monthly Report > Invoices by posting date in the Sales Analysis module is not ideal because it does not appear to include credit notes so the totals are incorrect.
    How could I create a query which gave me a total for each month of 2011 for every sales employee which includes invoice minus credit notes.
    Unfortunately my SQL is not great but I started something which might help - this is only for first 2 months of the year.   I presume I would need a select statement for each month if I wanted to have the sales employee name followed by a total for each month.    Maybe this is too intensive a query to run anyway.  
    SELECT T1.[SlpName],
    (select(sum(t2.doctotal)-(t3.doctotal)) where (Month(t2.docdate)=1 and t3.docdate=1) FROM OCRD T0  INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode INNER JOIN OINV T2 ON T0.CardCode = T2.CardCode INNER JOIN ORIN T3 ON T0.CardCode = T3.CardCode)
    (select(sum(t2.doctotal)-(t3.doctotal)) where (Month(t2.docdate)=2 and t3.docdate=1) FROM OCRD T0  INNER JOIN OSLP T1 ON T0.SlpCode = T1.SlpCode INNER JOIN OINV T2 ON T0.CardCode = T2.CardCode INNER JOIN ORIN T3 ON T0.CardCode = T3.CardCode)

    Hi,
    I have moved your posting here because it belongs here.
    You may check this first: Re: Top Customers report
    Thanks,
    Gordon

  • Sales order qty is not updated in COPA

    Dear All,
    for Warranty process ; we are using the standard item category - TANN which is working correctly and updates the sales qty in COPA at the time of billing
    and today we have created new Z item category-ZTAA ( it is same as standard item category ) but  this item category is not posted any COPA values at the time of billing and its posted the COPA at the sales order settlement without sales qty values.
    Can you please help me to know the reason for this 2 item category behavior and what can be the missing configuration or setup ? ( pls note i have checked different settings for this both the item categories configuration and the configuration is always same )
    Thanks for your quick feedback
    Regards
    Ramu

    Hi Ajay,
    yes ; i already checked this settings and the sales order does not have any requirement type.
    i think its very strange for me becuase both standard item categories ( without any item type in item categories ) and the behaviour is different ; for your quick reference pls check the below exmaple.
    Sales order - 123
    Item-10 /TANN
    Item-20/ZTAA
    COPA results :
    for item -10 , COPA is posted at the time of billing with correct qty
    for item-20, COPA is posted at the time of sales order settlement without qty.
    BR
    Ramu

  • Sales employee related data not flowing in standard report MCTI and VF05

    Dear All
    I have created a partner function sales employee by coping VE.All assignments in partner determination done.After maintaining sales employee in customer master it is flowing to sales order.After processing invoice when i check the standard report MCTI and in VF05 under partner function tab,.the data is not flowing.I checked in the OVRP setting are there.
    Please guide.
    Regards,
    Deepti

    Hi,
    Are you updated it as daily in OMO1
    double click on infostructure S006 and select daily and see
    Kapil

  • Sales orders ans reservations not taken into account on MPS / MRP

    Hello,
    I am implementing the MPS / MRP and I have the following problem:
    I have modified the necessary material master fields to take into account some materials on the MPS / MRP execution. These fields are MRP type, Lot Size, Strategy group and Availability Check.
    Then, executing the MPS / MRP I have realised that only the sales orders and reservations created after the material master modifications are taken into account when I execute the MPS / MRP.
    I suppose this is because the sales orders and reservations created before the material master modifications did not create the requirements because the availability check was not set for the material and so on... but I need to take into account these "old" reservations and sales orders .
    Is there any way to "update" these orders and reservations?? Or I need to delete them and create new ones??
    There are several sales orders and reservations created before the material master modifications. I think there have to be an standard way to update them.
    Thank you very much in advanced,
    Jordi.

    Dear,
    Are you getting these reservation in MD04?
    Check the Planning file entry for these material in MD21 if not then create it through MD20 and take MRP run with planning mode -3 Deleted and recreated. And Processing key NETCH.
    Also check the The firmed receipt is within the rescheduling horizon. The rescheduling horizon is set in Customizing for the MRP group (Transaction OPPR, Table T438M). A default value can be predefined in the Customizing of plant data (Transaction OPPQ, Table T399D). define the longer duration for it.
    The firmed receipt (the MRP element) participates in the rescheduling check. You can set which MRP elements participate in the rescheduling check in the Customizing of the plant data (Transaction OPPQ).
    Else you can carry out modification A using the MD_CHANGE_MRP_DATA BAdI and the CONSIDER_RESB method without making a modification.
    Regards,
    R.Brahmankar

  • Scrap Sales-VAT Condition Type Not Copying into Billing Document.

    Dear All
    I am facing problem while billing a scrap sales order.
    1. Even though condition record has been maintained for JIVP, the condition is not picked automatically.
    2. I enter it manually and save the document and later do delivery and billing; in billing, if I go to Conditions Tab, I do not see VAT condition copied into the document.
    Naturally, when I am doing analysis, only PR00 condition type is showing.
    Kindly require your suggestion as to where I might have gone wrong.
    Thanks and Regards
    Adithya

    Prasanna,
    It is fine to press Release to Accounting button, but the issue has not yet been identified to fix and then Release to Accounting.
    When I go to document flow and check the accounting documents in Goods Issue Document, Accounting document has not been created only, only Profit Centre and Controlling Documents are created. Am looking on the same y it has happened like this.
    Thanks and Regards
    Adithya

  • Materials not saved into COPA

    There is a case in my company, where some materials of a billing document aren't saved in COPA depending on it's Item Category. This box is not well documented and I have to look where this condition is located. I'm guessing is in one User Exit, but I can find it.
    Any idea how to find it? I checked other user exit and their using this command to clean COPA: clear: xaccit-paobjnr, but the "Where-used list" is not working for this field
    Any idea will be much appreciated.

    in this case , we can use lot of options ,
    for our first attempt will be on GGB0/1.check this one.
    or If u are sure abt Implementated Project(CMOD) , then check in SE15.
    <b>have u seen the Derivation RULES ?</b>
    Regards
    Prabhu

  • The backgtround I put in my template does not follow into the actual web page.

    I have followed all the steps to make a template and then pages from the template. Everything follows except the background. What could cause this? I am working in cs4.

    Did you insert your background into the Template CSS code or an external style sheet?
    Can we see your CSS code?
    Nancy O.

  • Sales Orders not flowing in COPA if Credit block is set

    We are implementing COPA for reporting in BW. The Billing information is flowing well in COPA. However, we have one issue with Sales Orders. Here is the scenario:
    When we create a new Sales Order without any credit blocks, the information is flowing to COPA Tables in R/3. However, if the Sales Order is blocked for Credit reasons, then the Sales Order information is not available in COPA. The moment the Credit block is released we are able to see the info in COPA Tables.
    The requirement is to have the Sales Order information availabe in COPA no matter what. Is there a way via which we can make the Sales Order info flow in COPA the moment it is created, no matter it has any blocks.
    Any info on this is highly appriciated.
    Thanks
    Srini

    Hi,
    I think it is a standard behaviour of Co-PA.Refer the note: 139725
    With rgds,
    Anil Kumar Sharma .P

  • SO not derived to COPA

    Hi experts,
    In one of the client, while creating SO, it is entirely not derived into COPA, not even a single characteristic or a value field, which is weird, because in another client, nothing's wrong. I have checked the COPA related customizing:
    - KEDR, no error issue is ticked
    - KEA0, environment and data structure is generated correctly (green light)
    - KEKE, profitability analysis is active
    - KEKF, activate transfer of SO is active (with indicator '1')
    The SO is created, but nothing is created in COPA (i checked ke24 and ke30, nothing related the SO is there). I simulate the transfer for that existing SO, nothing is derived.
    Any suggestions what could have possibly gone wrong?
    Please suggest
    Thank you all so much for your help
    Regards, Erwin

    Hi,
    Is your sales order item category having billing plan relevant, if this is the case have you maintaine billing plan?
    what kind of billing you are using , delivery based , order based , and whether billing plan is used or not.
    How incoming order is updated in COPA on the date of entry or based on schedule lines, if it is based on schedule line , are schedulelines properly maintianed.
    if there are many exists implemented in SD , check whether any of  exit having certain condition  on the fullfillment of which only copa doc is posted.

  • More than one Sales employee

    Dear All,
    i am sales employee functionality. i created partner function P1 by copying the standard function PE. i created two sales emplyees and assigned in customer master dat with partner function PE&P1.
    i rasied the sales order& invoice , there i am getting the these partner functions.
    but when i am going to MCTI (Sales analysis of sales employees ), i am getting only PE partner function revenues. i am not getting the P1 partner function report.
    pealse help me out on above functionality.
    Thanks in advance.
    Regrds,
    Shekar

    Why use 2 different partner functions to identify two different sales employees? Why not just add both as partner type PE?
    You may need to check that PE is not setr to "Unique" (limited to only 1) in IMG: Sales and Distribution > Basic Functions > Partner Determination > Set Up Partner Determination >>Set Up Partner Determination for Customer Master >>>Partner Functions
    By identifying them both as PE, they will both show up in the Sales Analysis report.

  • Set sales employee as inactive

    Hello,
    in SAP BO you can add sales employee, but can not be erased. Number of buyers is growing - when you create a document (invoice, ...) list of sales employees becomes confusing. We would welcome the possibility of setting sales employee as INACTIVE. The documents would then be offered only to active sales employees.
    Many thank.
    Alexandra Herichová

    Hi,
    thank you very much for your comment. I would like to inform you we are currently working on de-activation of Sales Employee (S.E.) in B1, where option to define active / inactive S.E. will be available. Consequently inactive S.E. will be by default not visible in all relevant lists, however user will have an option to report all data for all existing S.E. due to backward compatibility.
    Other areas are planned to be covered in a future as well. Please consider this as a potential Patch candidate and not as an SAP commitment.
    In case of any questions, feel free to contact me.
    Best Regards,
    Martin Pavlinsky
    B1 Product Definition

  • Sales employee and sales group

    Hi Gurus
    How sales employees can be assigned to sales group . As understood a sales group have many sales employees but could not able to find in SPRO where sales employee is assigned to sales group?
    How can we display sales employee in Sales order ? via partner function? are sales employees customer specific?
    thx in advance

    To avoid th use of HR that is not very well linked to SD you can:
    1) use the SALES OFFICE field to describe the sales grupo
    2) use the SALES GROUP fiel to describe the employee
    3) assign 2 to 1
    you define and assign them in customizing:
    spro: enterpr.structure->definition->sales and distr.->maintain sales office / sls.group
    spro: enterpr.structure->assignment->sales and distr.->Assign sales office to sales area / Assign sales group to sales office
    regards
    Roberto Mazzali
    Pls. reward if helpful

  • SIS by Sales Employee

    Hi,
    I create new info structure for sales analysis by sales employee by copy from S006 (both info structure and update rule) but when I run report drill down by sales employee system show sales employee number = 0000000 not show the actual sales employee number. Any suggestion pls?
    Regards,
    Jr.SD

    First, you'll need to find out which info structure is used in this report (S006, I guess). Each report is using a different info structure, so if one of them is working it's not an inidicator.
    Then check in SE16 if there are any records whatsoever in the structure. If not, check transaction OMO1 if update is turned on for this structure. If yes, then check if the configuration has been maintained for updates in this info structure. This is too complex to explain here, you might want to read more in SAP help:
    http://help.sap.com/saphelp_470/helpdata/en/c1/37544e449a11d188fe0000e8322f96/frameset.htm

Maybe you are looking for