Sales order do not create after SAP upgradation to package EHP7

Dear Experts,
SAP client is recently upgraded to EHP7. Since then we are observing difficulty in Sales order creation [VA01] manually [with or without order reference].
When click on SAVE button, entire screen display get freezed, without any message [Error/Information/Warning] pop-up. it seems as if system was trying to display message; caused due to any kind of event occurrence; but unable to show up.
Moreover, when we click on "BACK" or "EXIT" button, then it prompts choices to save the data. Yet again we receive the same freeze response whenever chose "Yes" option.
Please note:- before up-gradation, we were able to create orders with the same data, what we are using to create now.
Any help or clue on this subject would be highly appreciated.
Thank you for all your help.
Best regards,
Rahul Agarwal

Hi,
did you check what are the sales orders Enhancements that are activated with EHP7 under T.code-SFW5

Similar Messages

  • Additinal tab B in sales Order header not displayed after EHP5 upgrade

    Hello Everyone,
                              I am facing an issue that the 'Additional data B' in the sales order header is not getting displayed after we ugraded to EHP5.
          We found the issue , that the screen '8309' provided by SAP for the additional data in SO header is not getting called.The call is made from screen '4312' but the call subscreen screen statement fails.
    This might be because these screens were modified (both '4312' and '8309' )using the Access key to accomodate more fields in the screen then originally provided. And SAP does not support for this modification as given in the SAPnote  170183.
    Now the question is how can I restore the existing functionality?
    PROCESS BEFORE OUTPUT.
    Verarbeitung vor der Ausgabe
    Kopfdaten vorbereiten
      MODULE VBAK_BEARBEITEN_VOR.
    PBO-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
      CALL SUBSCREEN 8309 INCLUDING 'SAPMV45A' '8309'.
    PROCESS AFTER INPUT.
    Verarbeitung nach der Eingabe
    PAI-Aufruf des Kunden-Subscreens "Kopf-Zusatzdaten B"
      CALL SUBSCREEN 8309.                                                             <----This statement fails
    Alle Felder in der Bearbeiten-Kette
      MODULE VBAK_BEARBEITEN.
    Please advice.
    Regards
    Abhishek

    Hi
    Do you see SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'?
    Regards
    Eduardo

  • Customer exit is not functioning after ECC upgrade/support package

    It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
    COZF0002 Change purchase req. for externally procured component
    EXIT_SAPLCOZF_002
    INCLUDE ZXCOZU02
    *&  Include           ZXCOZU02
    CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban>   TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
      IF ( caufvd_imp-auart = 'ZM05' ).
        SELECT SINGLE fkstl INTO l_fkstl FROM prps
          WHERE pspnr = caufvd_imp-pspel.
        IF ( sy-subrc = 0 ).
          WRITE l_fkstl TO <fs_eban>-zzfistl.
        ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
      ELSE.
        WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
      ENDIF.
    ENDIF.

    Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
    *& Include ZXCOZU02
    CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
    FIELD-SYMBOLS: <fs_eban> TYPE eban.
    DATA: l_fkstl TYPE prps-fkstl.
    Move values from the LUW to the Internal Table
    ASSIGN (lcc_eban) TO <fs_eban>.
    If the field symbol is "NOT' empty then proceed
    IF ( <fs_eban> IS ASSIGNED ).
    if WBS work order, get cost center from PRPS
    IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
    WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
    WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
    if not WBS WO, move cost center minus leading zeros to funds center
    ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
    ENDIF.
    ENDIF.

  • Open quantity in Sales Order did not update after cancelling Reserve Invoice

    Client created Credit Memo with reference to Reserve Invoice but this did not update the open quantity in Sales Order. Client is using SAP B1 8.82 PL9. I tested this in SAP 9.0 and still same behavior. Is there a work around other than creating another SO?
    I checked Document Settings and "Reopening Doc by creating credit memo based on Doc" is enabled.
    Thanks in advance.

    Thanks for the reply. How will the client be able to make new reserve invoices from the SO? They are trying to make partial reserve invoices from the sales order. I already suggested to just change the quantity in the reserve invoice before adding. But I have doubt because the SO might close prematurely before they complete the quantity in the SO because open quantity is much less then the quantity in SO.
    SO Quantity: 100
    Open Quantity: 40
    Reserve Invoice 1: 60
    Reserve Invoice 2: 40
    SO closes before they can make Reserve Invoice 2

  • How to block the sales order for not creating requirement

    Dear All,
    My client want that whenever a sales order is raise, that should not go create requirement for production unless until account department check whether the prices etc are correctly put or not
    how can i do this
    thanks

    I suggest you can try to use the functionality of Status Profile.
    Create one Status Profile  with 2 line items-
    1: First line : Pricing Approval or PR and check what all you want to block if this status is assigned to the order type.
    2: Second line : Released and check what all you want to be released once the Approval is done.
    So by default the status profile - Pricing Approval will be assigned to the Sales Order during order creation. Then after your accounts department check the pricing and approves , they can change the status to Released and the order can be processed further.
    Regards
    Sai

  • Sales Order is not creating with reference to Quantity Contract.

    Dear SAP Experts,
    I am creating a Sales Order with reference to quantity contract but system showing an error *"""Material SUG10051 does not exist in RG1 Table for Excise Group 42 - Message no. ZCOMM002"""* i am not getting y system showing this error because all the necessary configuration for series group is maintained already.
    Please advise me what should i do.
    Looking forward for your quick response on the same.
    Regards
    Parul Deshwal

    Hi
    As per STD SAP, all billing items will be updated in RG1 register.
    The control is in J1ID where you have to select "Material and Chapter ID combination" and choose the tab "Material type".
    There against the billing material code, maintain "F"
    Also check setting
    IMG --> Logistics General --> Taxes on Goods movements --> India Check Basic Settings, Master Data, A/c deteremination, Business transactions and Tools.

  • My sales order is not created and showing erroe

    dear sir,
    i ve already created the customer with internal no
    and wen i m raising the sales order one erroe is comming" no costomer master record exist for the sold to party" error no 199
    but the customer master is still there and i ve  also created the custome in same sales area wer i m raising the sales order
    before some dayz i ve done a blonder that i ve deleted the partner functions from strandard but again i ve created as standard .then i used it for my account group.
    so why the error is comming please help
    its really urgent....
    with regards
    subrat

    Subrat,
    since you deleted the cusomer master and since your number assignment is internal , once you delete the customer master you would not be able to create the customer master with same OLD Number range , it will take a new number this time for the sold to party which is created.....
    and that is why the old one will not work , use the customer master and it should work fine ...
    Cheers

  • Sapdata3 has been not created after Sap Neatweaver 7.3

    Hi Gurus,
    I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
    However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
    can any one susggest.
    Regards,
    Jeetendra

    Hi Jeetendra,
    Check whether you system is up and running ?
    If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
    As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
    Hope this helps.
    Regards,
    Deepak Kori

  • PDF in Japanese language not appearing after SAP upgrade

    Hi,
    When a P.O. is generated and when user clicks on Print Preview a PDF file will be generated and sent to the Vendor in Japanese Language, It was working fine now some SAP upgrades has  been done last week, Now nothing appears in the PDF P.O. generated, So please let me know what went wrong and is there a seperate package for Japanese language or how to go about this.
    Points assured.
    Regards,
    Prabhu

    Please help me.....
    Points assured
    regards,
    Prabhu

  • SO28 Inbound Mail Sender Email Address not available - after SAP upgrade

    We have recently upgraded support packages on our R/3 system and
    discovered that inbound emails (SO28) that could previously be identified by
    the email address in the format of typical email address format are now coming
    into the system in the format outlook display nameu2018lastname, firstnameu2019.   We use the email address to validate against the SU01 data to make sure the email is coming from a valid user.  This is causing our custom written validation of the inbound email address to fail.
    We are using function module SO_DOCUMENT_READ_API1 and retrieving the
    email address from the field document_data-send_fnam.
    We have updated the following support packages
    BASIS 6.40 SP 17 to 21
    ABAP 6.40 SP 17 to 21
    SAP HR 5.00 SP 21 to 39
    PI_BASIS 2005_1_640 SP8 to 13
    SAP APPL 5.00 SP 10 to 18
    PI 2004_1_500 SP12 to 17
    EA_FINSERV SP10 to 18
    Has anyone ran into similar issue?  If you have, could you let me know how did you resolve your issue.
    Thank you.
    Jennifer Tran

    from the SOFM object 'OFFICEOBJECT' in the
    implementation of the RECEIVE method of bor object ZWIMAILREC. The
    address object of the sender is a attribute of the SOFM object and thereis it possible to get the address string.

  • HTML Page not appearing after SAP Upgrade from 4.6c to ECC 6.0

    Dear All,
    I am novice in ITS and IAC configuration stuff....
    Issue: We have a HTML page which shows a tree structure of Functional location and Equipments. A Z transaction is built to cater the requirement. User logs on to the HTML page navigates thru the Tree structure of Functional locations and equipments and the logs the workrequest or Break down details. In 4.6C every thing is working fine. But after Upgrade in Testing Server (We are not go live yet) we are facing a problem where the HTML page with tree structure is skipped off and directly the Z transaction is appearing on the web page.
    Did any one faced such issue? Any thoughts is highly appreciable?
    Thanks,
    Sanjay.

    Thanks Frank and Dhurairaj....and sorry for the delay in responding..
    I have checked my service in SICF and it is active. I also tried to create a new Service and now I am now getting "500 Connection timed out" error.
    Our Z transaction is ZW03 and Service name is ZW03_2.
    We are on Netweaver 7 (2004s)
    Steps I followed:
    1. Created a Service ZW03_2 in SICF (New Sub element) and then Activated.
    default host -> SAP -> bc -> gui -> sap -> its
    2. Created a folder ZW03_2 under SAP->Public->ITS (Transaction SE80, MIME Repository) and imported all MIME objects into that folder.
    3. Created a Internet Service ZW03_2 in SE80. Once I created a Service already there is blank folder Topic 99. Then I created two folders Mime Objects and HTML Templates. Imported all Mime objects into folder "Mime Objects" and Created templates in "HTML Templates" folder. Then I published ..
    After doing all the above setting then I tried to test the service and I am getting 500 Connection time out.
    Please let me know if I missed any step or if I have done any setting incorrectly.
    Thanks,
    Sanjay.

  • Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

    Hiiii,
    In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
    Best Regards,
    Sridhar . P

    Dear Heagal,
    I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
    1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
    2. Removed Credit groups for Delivery Type.
    3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
    I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
    Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
    If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and  Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
    Best Regards,
    Sridhar

  • Sales order should not be abled to be changed

    Sales order should not be abled to be changed after creating and confirming to the customer. What needs to be done?

    Hi kishore
    1) after creating the sales order   we are gong to send  confirmation through output determinatin output type (BA00) .
    2) once the customer confirms the  order based on thet we do the delivery. right----
    3) see exmple : a person who creates the order he does'nt have rights to change in big industry lot of departments (so many managers) has to see the order because  the order canbe  one item it can be 1000 items.
    4) every body will be having certain limitations like authorisations if you take my company i don't have authorisations to do FI settings or MM settings.
    5) what means to say is if  that order has to be changed ababrs might have written the code the moment the order confirms from the customers it's goes to respective department or managers through work flow if it goes any manager , a person who created the order he can't do any changes on that. that's why business works. that is  what SAP
    i hope you have under stood
    thanks
    surya

  • Sales order qty not confirmed when delivery done with partial qty

    Hi Guru's
    Need your help............
    We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order. 
    I checked all configurations regarding availability check but could not found.
    Example:
         Sales order line item qty: 4            -      2 qty confirmed (delivered).
         For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
    plz help me to fix this issue?
    regards
    sai

    Hi,
    Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
    Regards
    Gavin

  • Message No: V1 302- "Sale order is not available"

    Hi,
    I have an issue with my client.
    The scenario was:
    Sale order 1 is created.
    With reference to Sale order 1 , sale orders 2,3,4 are created.
    Now iam able to see the sale order 1,2 & 4 in VA03, where as iam not abel to execute the sale order 3 in the transaction code VA03 and the message was "Sale order is not available". The version we are using is SAP 4.6
    Now my client wants to know what happened to the sale order 3.
    I tried to check in the table VBUK - Block option but no use.
    Kindly do the needful how to check the status or what happened to the sale order 3
    Regards,
    Kiran

    Hi
    Go to VA05N and give a date range for doc date and the specific doc type and execute.
    Check if the sales order 3 is there.
    If its not available in VA05N, there is a possibility that it might have been deleted from the database.
    Regards
    Madhu

Maybe you are looking for