My sales order is not created and showing erroe

dear sir,
i ve already created the customer with internal no
and wen i m raising the sales order one erroe is comming" no costomer master record exist for the sold to party" error no 199
but the customer master is still there and i ve also created the custome in same sales area wer i m raising the sales order
before some dayz i ve done a blonder that i ve deleted the partner functions from strandard but again i ve created as standard .then i used it for my account group.
so why the error is comming please help
its really urgent....
with regards
subrat

Subrat,
since you deleted the cusomer master and since your number assignment is internal , once you delete the customer master you would not be able to create the customer master with same OLD Number range , it will take a new number this time for the sold to party which is created.....
and that is why the old one will not work , use the customer master and it should work fine ...
Cheers

Similar Messages

Sales order delivery is created and pgi posted, but stock is still assigned

Hello,
sales order is created and delivery and PGi is also created, but still stock is assigned to the order. requirements are still showing in MD04.

Hello Friend,
Please check whether that material is activated for QM view in that material master.As sometimes if QM check is not done then even after PGI material shows in MD04.

Sales Order is not creating with reference to Quantity Contract.

Dear SAP Experts,
I am creating a Sales Order with reference to quantity contract but system showing an error *"""Material SUG10051 does not exist in RG1 Table for Excise Group 42 - Message no. ZCOMM002"""* i am not getting y system showing this error because all the necessary configuration for series group is maintained already.
Please advise me what should i do.
Looking forward for your quick response on the same.
Regards
Parul Deshwal

Hi
As per STD SAP, all billing items will be updated in RG1 register.
The control is in J1ID where you have to select "Material and Chapter ID combination" and choose the tab "Material type".
There against the billing material code, maintain "F"
Also check setting
IMG --> Logistics General --> Taxes on Goods movements --> India Check Basic Settings, Master Data, A/c deteremination, Business transactions and Tools.

How to block the sales order for not creating requirement

Dear All,
My client want that whenever a sales order is raise, that should not go create requirement for production unless until account department check whether the prices etc are correctly put or not
how can i do this
thanks

I suggest you can try to use the functionality of Status Profile.
Create one Status Profile with 2 line items-
1: First line : Pricing Approval or PR and check what all you want to block if this status is assigned to the order type.
2: Second line : Released and check what all you want to be released once the Approval is done.
So by default the status profile - Pricing Approval will be assigned to the Sales Order during order creation. Then after your accounts department check the pricing and approves , they can change the status to Released and the order can be processed further.
Regards
Sai

Sales order do not create after SAP upgradation to package EHP7

Dear Experts,
SAP client is recently upgraded to EHP7. Since then we are observing difficulty in Sales order creation [VA01] manually [with or without order reference].
When click on SAVE button, entire screen display get freezed, without any message [Error/Information/Warning] pop-up. it seems as if system was trying to display message; caused due to any kind of event occurrence; but unable to show up.
Moreover, when we click on "BACK" or "EXIT" button, then it prompts choices to save the data. Yet again we receive the same freeze response whenever chose "Yes" option.
Please note:- before up-gradation, we were able to create orders with the same data, what we are using to create now.
Any help or clue on this subject would be highly appreciated.
Thank you for all your help.
Best regards,
Rahul Agarwal

Hi,
did you check what are the sales orders Enhancements that are activated with EHP7 under T.code-SFW5

Sales Order does not show up at the resource level.

Hi guys,
I have a flour mill of having 4 processs (resources)
1). Tempering (cleaning).
2). Milling.
3). Blending.
4). Packing.
I have two identical sales order. One has been through all the process (resources) and showed in the DS Planning board but, other one has not shown up there. It happens to me couple of times that such sales order do not show up at the resource level. Where should I check and correct? Aslo which way can I follow up these missing sales order? and What shoud I do if this situation happens?
Thanks
Shaan.
Edited by: Shaan313 on Sep 27, 2011 8:22 PM

313,
https://service.sap.com/sap/support/notes/1406120
Since you asked the question, I can assume that you don't have an "S" number. speak to the person in your company who administers your SAP Service Marketplace account (this is usually someone on your Basis team), who can obtain one for you.
Or, you can try on your own. A few stars have to be in alignment for the second method to work.
https://service.sap.com/request-user
Best Regards,
DB49

Sales Order is not saved when defining a Print output and without Print output it will saved the SO.

Hello,
In VA01 when we create SO and define output type then Sales order is not saved,The error msg will display like " Order is not in the database or is been archived ".
But without defining output type SO will be saved.
So is there any ABAP Developement or enhancement?
Kindly Suggest.
Regards,
Abhishek K.

Hi,
Its something like SD_PARTNER_UPDATE...
Kindly see below screenshot for your reference.
Regards,
Abhishek .K

Sales order some line items are showing not relavant

Hi SD Guys,
In sales order some line items are showing not relavant.
Why are they showing a status of not complete or "not relevant"?
Thanks
Sunny

Hi sunny,
plz check the each line item in the sales order controls by the item category, so check the item category , depends on the item category, pricing,delivery and billing takes place.
regards,
ram.

Sales Order is not consider for MRP in MRP Type PD and Strategy 40

Sales Order quantity is not consider for net requirement calculating in MRP.
My MRP Type is PD and Strategy 40.
Also in MD04 Sales order is not appearing.

Dear,
Requirements to MD04 will flow based on the settings you maintain in OVZ9 for the combination of "Availability Check" and "Checking Rule". Here whatever fields you choose under the tab "In/outward movements", that will be considered.
It may be because of Requirement type Missing at schedule line category level . In MD04 requirement are pass on Either Individually or collectively . In Case of Individual each schedule line create one entry in MD04 ( Stock Requirement list)
So check the materail master for checking group is maintain or not?
Please refer this thread also,
Re: Sale order not reflecting in MD04
After that run MRP again and check the result.
Regards,
R.Brahmankar

Runtime error while creating sales order in AFS(Apperal and Footware Sol)

Hi everybody,
While creating a sales order in AFS(Apperal and Footware Solutions) i am getting runtime error.In the error the error description is "CIF_SNPGRPID is unknown". Can anybody tell me how i can resolve this.And i am getting this runtime error when i am using AFS material only.When i am using standard material i am able to create the sales order.
Thanks&Regards,
Rambhupal

Hi Rambhupal,
Check all the conditions related to Prerequisites for AFS material.
Go to SM21 transaction code and analyze the details.
Bye,
Muralidhara

Third party sales orders are not showing in Billing due list (VF04 )

Hi,
In Billing due list Third party sales orders are not appearing because VKDFS table those entries are there. How can we get Third party sales orders in VKDFS table as well as VF04 ?
Please suggest me.
Regards,
KUR

Hi Kur & Sandepp,
Check this notes:A) Note 210500 - Billing status of a third-party item,B)2) Note 210561 - When is a third-party item displayed in VF04.
Re
Regards,
Madhu.

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

G/L account in sales order determination not diplayed

Hello,
Please help on my issue related to the account determination in sales order.
I have this condition type maintained with account key and accrual in pricing procedure.
I have also maintained both G/L and provision account for the account key and accrual in VKOA.
So now, I am expecting that when I go into the condition details of the condition type, I can see in the account determination the account and accrual key together with the G/L and provision account maintained, but then I only see the Account and Accrual keys on the condition details w/o the G/L accnt and provision accnt. can u please advise why is it not showing? and what did i missed in customizing?
Thanks in advance!

Hi,
It is understood that you have assigned the G/L account in VKOA; but not traceable in the sales order. In VKOA, if you selected the first combination, check for 1. Condition type for account determination [KOFI or KOFK], 2. Account assignment group for customer, 3. Account assignment group for material.
KOFI is for account determination; whereas KOFK is for account determination with CO.
The account assignment group assigned in VKOA should match with the Customer and material used in sales order.
After creating the sales order, you can check the account assignment. Display the document; Goto environment >> Analysis >> Account determination. Click on the u2018condition typeu2019 to see whether the GL account is determined or not. Click on the access to check how the G/L account is determined.
Hope this information will be useful to you.
Regards,
K Bharathi

How to link Sales Order with Service Contract and then with Install Base?

Hi Friends,
1) I would like to know the integeration process from sales order to Service Contract and then with Install Base.
2) I couldn't see anything enabled in Service Tab in Order Lines, its grayed out. Is there any set up/profile option to get it enabled?
3) How can we create AR invoice from Service Contract?
Please let me know if anyone has idea on this.
Thanks in Adavance,
Vara

Dear Sid,
Thanks for your promt response.
Let me explain you what I did.
1) I have booked a Bill Only sales order which has one order line, mentioned it as Service Item and provided the same details in Service Tab in Order lines. Now Line status is "Fulfilled"
2) Then Submitted Workflow Back Ground Process for OM Order Lines and it has created an AR Invoice and closed the line
3) And then submitted "Service Contracts Order Capture Integration Program" from SErvice Contracts Responsibility and it completed normal.
4) Now I went in to Launch Contracts Window and queried with the sales order but couldn't see any contract created
5) Then I went in to Reprocess Order Window and found this order shows an error message as "Referenced Product not present in the Installed Base", then I tried to reprocessed it, but the same error message again.
Here I have few doubts:
1) Are the AR invoice and Service Contract Billing Invoices same?
2) In above scenario AR Invoice has been created, I would like to do the billing from SErvice Contracts and need to create an Invoice in AR? how can I do that?
because as you explained in one of my questions earlier, A Single Invoice can be created for the whole duration of the contract. I want to do that and trying for the same.
3) Regarding the above error message, how can I resolve it and create the service contract against that Order?
Thank you so much for your helpful answers.
Regards,
Vara

Sales order does not appear in MD04

Hello,
One of my sales order is not appearing in MD04. I found out that in the sales order, the requirment type is missing.Is this could be te resaon for sales order not to appear in MD04.
2nd question) why requiremment type is not there in sales order. In my case, there is no entry in the item cat and mrp type table but in the strategy group in material master, the requirment type exists. so why the system is not showing requirment type in sales order by picking it up from the strategy group. in the item cat +mrp type table, the source is kept as "0", which means the system should pick the requirment type from strategy group . so why it is not picking if it is defined in straetegy group ?/
Question 3) or is it that the sales orders appear in MD04 only after MRP run but then why other sales orders are apearing before MRP run.
regards
sachin

Hi sachin,
what planning strategy group is your are using.
I assume plan stg grop is 20.
Normal settings for 20 Paln stg grop in material master.
1.Item category group (such as NORM) on the Sales Organization screen
2. Set Plan stg = 20 at Mrp View.
Requierment type fo customer requirement = KE assigned for planning strategy 20 at customizing.
For 20 plg stg requiremnt type is customer requirement type only.
with above settingsif create sale order it will appear at Md04 before MRP run.
u can see the customer requ type at "procurement tab "of sale order.
For planning of material u have to maintain valid MRP type at Mrop view.
i am not clear about ur second question.
please comeback
Regards
Pradeep

My sales order is not created and showing erroe

Similar Messages

Maybe you are looking for