Sales Order Entry via Portal in R/3 4.7

Hi,
is there an iView (out of a Business Package) available for Sales Order Entry via Portal in R/3 4.7 ?
Or do we need to develop this from scratch?
Thanks & Regards,
Erik

Hi Erik,
   The only one I found was in the Business package for Sales but it is listed for ERP2004 only.  I found another one in the Business Package for Retail 50.2 that was 4.7 compatible but it is shown as out of maintenance and I was unable to download it. I didn't try very hard to get the download to work.  You may want to take a look.
Good Luck,
John

Similar Messages

  • Mandatory field in sales order entry  VA01.

    Hello ,
    I need help to resolve my problem. I am using transaction VA01. In the sales order entry we have provision for fast entry for characteristics.
    This can be customized in SPRO .. IMG -> Sales and Distribution -> Sales Documents -> Fast Data Entry of Characteristics in Sales Documents -> Define Characteristics Display for Overview Screen.
    In the characteristics display I have added the required characteristics I need for sales order creation. Now i need to make one of the characteristics field as mandatory for sales order creation.
    How can I do that setting, so that each time when the sales order is created the particular characteristics fields pops out to be mandatory?
    Thanks in advance.
    Regards,
    Divya

    Hi,
    How can I do that setting, so that each time when the sales order is created the particular characteristics fields pops out to be mandatory?
    Maintain the Entry required for all the desired characteristics of finish material class.
    Try and revert.
    Thanks
    Hrishi

  • How to make sales order entry mandatory in CO01

    Hi,
    I have a scenario where the system should not allow to create production order without the reference of sales order.
    I can achieve this by using transaction code CO08.But in some special cases i have to use CO01 transaction for creation of production order.Will the system prompt for sales order entry through Co01 transaction.
    Regards
    Sreenath

    Hy Sreenath,
    For this you have to use User Exit.
    -  Enhancement when Creating an Order :-
    PPCO0006 Enhancement to predefine fields in order header
    -  Enhancement During Order Release :-
    PPCO0021    Enhancement for Order Release
    Better will be create saprate Order type for such type of requirements and then include that order type in User Exit.
    Regards,
    Dhaval
    Edited by: Dhaval Choksi on Aug 7, 2008 6:12 PM

  • Note messages at the time of availability check in sales order entry form

    Hello Friends,
    Im getting the following note messages at the time of availability check in the sales order entry form.
    ATP Process resulted in no data
    User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_rec
    User defined exception in package OE_SCHEDULE_UTIL Procedure Load_Results_from_tbl
    After this when we book the order, the order line status becomes 'Booked' and does not change to 'Awaiting Shipping'
    As a result of which im not able to proceed ahead with the rest of the order to cash cycle.
    Can somebody please guide me in resolving this error.
    We don't intend to use ATP as the client's business process is such that they maintain adequate inventory balances.
    Regards
    Anil Wadhwa

    Hi Anil
    Are you using a RAC DB configuration? Please check if this is true, there are special setup steps that are required to be performed in case of RAC DB configuration and this issue usually occurs if such configuration is missing specifically if its happening randomly for some ATP requests.
    You can find actual steps to be performed on metalink.
    Thanks
    Navneet Goel

  • Partner selection at sales order entry: ship-to's flagged for deletion

    Hi All,
    I need some inputs for the following issue.
    For Partner selection at sales order entry level: ship-to's flagged for deletion are also proposed as it is entered in customer master. I dont want to delete the ship-to's marked for deletion in the customer master.
    In short - only the ship-to's that are not marked for deletion should get populated.
    Kindly suggest if there is an userexit for the same.
    Regards
    KCB

    Hi,
    You can try Blocking option for the particular Ship to Party.
    But this will not disable it appearing in the Partner Function Selection Pop up.
    Once you block it; though it appear in the selection pop up, you cannot select & proceed, as it gives a error message.
    You can set this block in 2 ways.
    1 - Tx: XD05
    Go to the Tx give the customer number, sales area & Pres enter.
    There you can set different type of blocks depend on your scenario.
    Save
    2 - Tx: XD02
    Go to TX, Give the Customer number (Ship to Party) & go in. Since you have marked him as a delete, you'll get a warning message there too.
    Select Menu option -> Extras -> Blocking Data
    You'll coime to the same screen as above.
    Maintain relevant blocks & Save
    Check whether it satisfy your requirement.
    Best regards,
    Anupa

  • How to add a new output type in sales order header via ABAP program

    Hi All,
    I have to add new output type (ex Z001) in sales order header via an ABAP program. please let me know how to do this.
    Thank you all in advance.

    Hi,
    You can use the FM ..RV_MESSAGE_UPDATE..
    Thanks
    Naren

  • I want a push button for line items in my sales order entry screen.

    Hi,
    I want a push button for line items in my sales order entry screen.
    How can I do so?
    Thanks.

    Hi Kumar ,
    To have a push buttons you need to first assign a pf-status .
    here a sample code for a push button and its handling :
      set pf-status 'SELECT' .
    at user-command .
      describe table t_lpr lines w_lines .
      case sy-ucomm .
        when 'SELECTALL' .
          set pf-status 'SELECT' excluding 'SELECTALL' immediately.
          do w_lines times .
            read line w_line field value w_check . " INTO W_CHECK .
            if w_check = space .
              w_check = 'X' .
              modify line w_line field value w_check.    "INTO W_CHECK .
              add 1 to w_line .
            endif .                        " IF W_CHECK = ' '
          enddo .
    Thus when you say pf-status say 'select' , Double click on that and you find a screen eher you can select icons and assign a function code to it!
    Hope it helps!
    Much Regards,
    Amuktha .

  • I have to send the sales order output via mail to a customer

    have to send the sales order output via mail to a customer, what steps i have to follow
    kindly guide me.
    regards
    satya

    Hello,
    You need to carru out your output configuration for this.
    Use tcode, NACE where you can do this centrally.
    Select V1 & click on output types above
    Select output type MAIL for your requirement & use tranmission medium as simple mail.
    After configuring your MP mail partner functions & use of proper output program you will be able to send mail to your party.
    Hope this is helpful to you.
    Regards,
    Dhananjay

  • Sales orders received via EDI

    Any idea of the table/field from where i can find out the all the sales orders received via EDI?

    hi;
    EDIDC is the table where in you will find all the Idocs that have come into the system. This is also the table which would give the info abt the Idocs that have been sent out of the system.
    EDID4 is the table where in you will find the idocs that have gone into error.
    Regards.

  • Product costing during sales order entry

    Dear Experts,
    Pricing Condition EK02 can calculate the actual cost during sales order entry. If the product costing will be activated for each and every order line item for calculating the actual cost EK02 automatically, does this have any down falls to the system performance or anything apart from this ?
    Looking for the expert opinion in this regard.
    Thanks
    Anil

    Hi Allan,
    Ideally if the number of line items would be less than 10 during order entry. Do you think is there any impact because of the costing run for each and every line item ?
    Looking for your response.
    Thanks,
    Sanjay

  • How to mark up the price for sales order entry?

    Hi Gurus,
    How to Mark up the price for sales order entry?
    Example: Item Price: $10, Adding 20% Margin
    Selliing price of the item is $12
    we are giving many typs discounts like festival Discount, customerwise, Order value wise etc..
    After giving above discounts, if discount falls below $10 system should not allow to book the order, Trigger should go to respective person or sales person saying that item price falling below cost, system should not allow to book the sales order.
    How to configure this scenarios in Order management Module, appreciate your inputs, advise.
    Regards
    AK

    Thanks for your response,
    can you please guide me step to achieve this requirement.
    Regards
    AK

  • Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

    We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
    Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
    Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
    Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
    Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
    Regards,
    Rommel

    Hi Jayesh,
    If I understand you correctly, you want that when creating SO from Quoatation
    the Ship to Party also follow/copy Ship to Party from Quotation, right?
    Just to confirm with you, when you creating SO reference from Quotation, you
    use copy/follow-up function, am I right?
    You can do this by setting in configuration of Copy Control (like mentioned by Hui).
    Step as follow :
    1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions
    2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
        Party value from source document and use it in current document
    3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
        IMG->CRM->Transactions->Basic Settings->Copying Control for
        Business Transactions-> Define Copying Control for Transaction Types
    4. Here you set Copying Routine for your transaction types (put name of your Badi
        created in step no. 2)
    Or alternatively, you can set it on access sequence in Partner Function
    Ship to Party in configuration. You can define access sequence the Ship
    to Party is taken from Preceeding Document -> Ship To Party
    1. Go to Partner Function access sequence :
        IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
    2. Create new access sequence with following entry :
        - Source COM_PARTNER_A (PrecedingPartner)
        - Check Mapping for Partner Being search
        - Partner Function in Source  = Ship To Party
    3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
       Type.
    Tell me if this is what you looking for
    Gun.

  • Problem in sales order change via BAPI

    We are in AFS system and we try to reduce a quantity in sales order via BAPI.
    We recive back an error 8w 280. We are not able to find wich is and where is a problem.
    Does anyone have experince on that problem/error message
    Thanks in advance
    Andrea

    Hi Andrea,
    Since BAPI invloves more programming stuff, I adivce you to post this thread in the ABAP forums also.
    Regards,
    Senthilkumar SD

  • SD-how to process material packing before sales order entry?

    Hi,Guys,
    If materials are packed before sales order is created, like:
    materia A,  10 batches was put in one bag,
    how to model it in R/3? Handling Unit Management can still be used?
    Best regards,
    Cherie

    Maybe I should tell the scenario more clearly.
    Following is the physical process in a High-tech company:
    10 finished goods:  A , were produced.Batch is 001.
    In the plant, they are packed into one bag. And this bag has a packing lable number:100
    now comes the sales order for one bag of material A. Stock worker go to the warehouse to get the packing number:100 to deliver this sales order.
    This scenario is different from the standard one using HUM. Because the standard scenario packing the materials when doing order entry,but this one is before order entry.

  • Block material for sales order entry in specific plants

    Hi Experts,
    I wanted to know if there is a simple way to block material from being ordered in a specific plant other than maintaining exclusions. My situation is one sales org, two plants (A & B). Order entry should be blocked at plant A and not B.
    I tried using the material Cross-distribution-chain material status on Sales org 1, but this blocks across all plants.
    I also tried Plant-Specific Material Status on purchasing view, this blocks the material only if it is being procured (non stock). This does not work for materials that does not require procurement. Setting the material to deletion status in MM06 at the plant level will only give a warning.
    Any ideas or suggestions on how to handle this?
    Thanks,
    Nanda

    Lakshmipathi,
      Thank you. But I don't want to entirely cut off the plant from the sales org. I just don't want to be able to create sales order for a few materials in a specific plant. Ex. Material A should not be allowed on sales orders in plant X but should be allowed in plant Y, both are assigned to the same sales org 1000.
    I did some research and found there is no standard way to handle this in SAP, so I decided to go with a user exit MV45AFZZ. By checking against plant specific status (MARC-MMSTA) and if the value is 'XX' then issue an error message.
    Thanks,
    Nanda

Maybe you are looking for