Sales order- Warning msg Static credit check

Hi, SAP Guru,
When I create a order & saving it ...a POP UP comes with warning msg the static credit limit exceeds..... Can any one please let me know the how I can remove the warning POP UP . As client do not want any pop up should come while saving the order.
Please help.
Thx & regards

Hi,
If you remove the entry from the field "Check credit" in "OVAK" T.Code,the credit check will not happen for this order type.Which we don't want.
We need that the credit check should happen but the pop-up is to be removed.right?
For this goto the T.Code "OVA8".
Select your valid entry.Details.
Remove the value as "blank" for the field "Reaction".Press F4 for more options.
Beside this there is one more field "status/block" which is ticked means the order will be blocked for further transactions.And also status will be updated accordingly.
These blocked order have to be released either by using the T.Code "VKM3/VKM1".
Regards,
Krishna.

Similar Messages

Sales order exit to bypass credit check

Hi ,
AS IS : if the customer exceeds the credit exposure a pop up for static credit check comes while saving the order and the order gets blocked , and every time it has to be unblocked manually.
To BE : Our client wants that Credit check should only happen when the customer is changing the quantity field of the order and should not get blocked every time when he is making any other change in the order and saving it .
Please help me with this: Is this feasible ? If yes then how can I do this is, any Exit /Badi where I can actually change the way this functionality work by SAP .
Thanks in advance
Gaurav Deep

Well, yes, it's possible. Have you reviewed the documentation in the IMG, both the basic configuration section as well as the section on credit management user exits?

Without exceeding the credit limit sales order is blocked for credit check.

Dear Experts,
In my production server as well as quality server sales order is blocked for dynamic credit check.But the fact is that the credit limit is not exceeded.only 18% of the credit limit is used by the cutomer.The same problem is there in quality server also.
Kindly help.
Best Regards
Biju

Dear Biju,
Check whether the customer code has exceeded credit limit in any other credit control area.
Run the following programs.
RVKRED77 , RVKRED88 , F.28
After credit re-organisation, please check again and revert back.
Also would like to ask you whether you have made any recent changes in the credit master data [FD32].
Thanks & Regards,
Hegal K Charles

Confirmed quantity in static credit check in sales order

what our requirement is ...we have a static credit check activated.
while creating the sales order when ever the customer exceeds the credit limit the check will be activated and the order is blocked with 0 confirmed quantity.
but we want the confirmed quantity should come as the that of standard order irrespective of credit block.we need the confirmed as well as block should also be there , so tell us is there any settings in the configuration need to be done to acheive this.

Hi,
As per my understanding u need use routine.
please read this:example of routine.
User requirement for confirmation of quantities in availability check
   This is an example of a subsequent function requirement. If this
   requirement is met, then the system will confirm quantities for the
   sales document line item. If not, then no quantities will be confirmed.
   ATP requirements, however, will still be passed to planning. This is an
   example of a user requirement to determine if the confirmed quantities
   should be set to zero or not. A user requirement would run after the
   system requirement '1' for confirmed ATP quantities.   The sample
   requirement '101' adds the additional requirement that confirmed
   quantities should be set to zero if the credit block is set.
Best Regards,
venkataswamy.y
Edited by: yanamadala venkataswamy on Dec 8, 2008 10:25 AM

Static Credit Limit Check for Sales Orders - Net Value vs Credit Value

We are testing order credit check and we have run into a problem with the Static Credit Limit Check. The Static Credit Limit Check is set to use both Order and Delivery Values. SAP uses the values in S066 and S067 to determine what values it uses to check against the credit limit. Standard SAP uses the confirmed quantity times the credit price to get the order values - this is the credit value.
So the problem is, once an order is released it is set up so it does not go back on credit hold, so anything which is not confirmed (but could be) it a potential credit value which is unaccounted for in the credit exposure and the customer can go over the credit limit.
Additionally, we run AFS and have items which are rejected with a J0 rejection code (unconfirmed) which have the potential of being confirmed and shipped and we want to include these items in the value of the order which is being checked against the credit limit (along with the deliveries, invoices and receivables).
Here is a quick example.
Customer has a credit limit of $100 (no deliveries, invoices or receivables - to keep it simple)
Order 1 is placed with a credit value of $50.00 but a potential value of $100 (the other half is J0) - this passes the credit check since $50.00 is less than the limit.
Order 2 is placed for $50.00 and has a credit value of $50. This also gets approved.
At this point, the credit limit used is 100% (based on standard SAP)
Then Order1 backorder is confirmed and the new credit value is now $100. This order now puts the customer over their limit and if the order had been released would not go back on credit hold and therefore the customer is not over their credit limit by 50%.
What I want is for Order1 to be credit checked for the $100 not the $50 so the exposure is correct.
Does anyone have any suggestions as to how we could use the Net Value of the order to perform the static credit check? And any thoughts on how to determine the correct credit exposure (open order value plus items which are J0, plus deliveries, plus invoices, plus receivables)?
I am thinking about a Z table to track the adjusted values on the orders and then use one of the customer checks to do a static credit check with the adjusted value. And for the exposure, use the adjusted value to recalculate the values in F.35 to show a more accurate view of the credit exposure.
Does anyone have an easier way to do this? Any advice is appreciated.
Thanks,
Suzanne

Hi Suzzane,
In the scenario that you have provided, in the first order items worth 50$ are rejected. Hence standard SAP will not take this into account as this item is rejected.Two solutions can be provided here:
1) The line item can have a delivery block instead of a reason for rejection.This way the 50$ will get accounted.However, if this is against customer norms as this will appear in the order acknowledgment, this cannot be used.
2) User exit can be used where a credit check can be triggered once the document value changes, even though the document has a released status.
Hope this helps.
Thanks,
Vinu

Static Credit Checks - Open orders - Confirmed quantity vs total quantity

We are using static credit checks. Credit currently only sees open orders with a confirmed quanitity.
Customer orders 10 items we have 5 in stock. Credit check runs, credit is evaluated basd on the confirmed open quanitity of 5. The order gets a credit block. Credit rep releases the order.
A few days later the balance of the order arrives in the warehouse. The remaining 5 are confirmed on the order. Since the confirmed quantity has been increased and subsequently the confirmed open value, the order goes back to credit.
We frequently encounter this situatuion and are looking for ways to reduce the number of credit round trips.
If we wanted to base the credit check on the total quantity / order value, as opposed to the confirmed quantity / value what do we need to change.
Insights are appreciated.
Edited by: tooCann on May 14, 2008 2:30 PM
Edited by: tooCann on May 14, 2008 2:31 PM

Hi cann
As you are going with static credit checks, system will check the order and if it exceeds it will throw an message (error , warning )
Now again , if you create another sales order , that value will not be taken into consideration , system again will check for the credit limit amount
For example :
credit limit - 10000
sales orders - 1010, 1011
1010 sales order value - 11000
1011 sales order value - 10500
Now when you create a sales order system will check the credit limit 10000. and once you save it and create another sales order (1011), again system will check for the same credit limit 10000.
The credit limit gets reset once the order is saved ,in static check
Now any open quantities are there means and when it gets confirmed then system will check for those open quantity also
To minimize all these use dynamic credit check
Regards
Srinath

Sales Order Free item and Credit Limit Checking

Hiii Guys,
need your help,
How to release Sales Order free item when credit limit exceeded ?
Here some info :
Customer : ABC
Credit limit : 50,000.00
Credit Exposure : 52,000.00
Risk Category : 003 High Risk
My user want to create sales order for free item for customer ABC, the customer abc credit limit already exceeded .and the item in sales order not contain any value, it should past the sales order creation. how to allow Free item past the credit limit checking ?

To reslove this issue,
I. you can create a new sales order type. for which you make the credit control de-active.
2. If you can't create a new order type and this cotrol should happen at item category level.
then try config at the IMG>Sales & Distribution>Basic function>creditmanagement>credit management/riskmanagement setting>Determine Active Receivables Per Item Category.
Regards/Rakesh Jindal

Sales Order released even though Credit limit exceeded VKM1

Hi,
I have got a scenario where a Sales order has been released(Delivery,Invoicing has taken place) even though the credit limit of the Customer has exceeded.
Steps:
The user check the order from VKM1 (push button check and save), but he didn´t release it, then checking the order changes we found that it was released by his user number.
The order at the begining was blocked but after running just the check it was released automaticly.
Checking from OVAK the document type has Automatic credit control.
On OVA8 the static check is activaded and also the open orders and open deliveries
What could be the reasons as to release of Sales order even after exceeding Credit limit????
Thanks

Hi Randall,
From your description it is clear that the sales order was released by the user unknowingly, so when ever you release sales order all the sudsequent documents (deliveries&billing) would be relesased. There is no fault with the process, the user would be hidding some facts, so there is no way out. If you want to block the order again, you make some changes at the delivery level or sale order level and save it, the sale order will be blocked again. Next time see that the release strategy should be restricted for the limited users only. This can be done by BASIS consultant.
regards
prasad

Sales order is blocking while credit limit is exceeded ...

Dear Friends ,
Client issue regarding credit management ,
all customers are defined under low risk category ,
in OVA8 transaction code we activated
i) For Static credit check : reaction D & status Block checked & open orders , open deliveries are blocked
ii) For Oldest open items : reaction D & status Block checked & days oldest item 10 days
Issue is ,
while creating a sales order pop-showing credit limit is exceeded but it is not blocking the sales order , some not blocking the delivery . It is showing only pop-up for when it is in periods from 10-60 days in F.31 transaction code . requirement is it should be blocked .
Please respond asap ...
thanks in advance ...

Dear,
Oldest open Item check works as follows.
Say, you have set the Oldest Open Item indicator with D and Block (activated) and Days oldestItem as 1.
Then, the system will check if there are any any open accounting documents (billing documents which accounting document is created and not cleared) - and will consider the bill due date too, and will validate, if there are any open items which has crossed the billing due date, and that cross count is greater than the one mentioned in OVA8.. If any such document is there, then it will block the sales document..
say: Billing date: 10/10/ 2011
Payment terms: due in 10 days
Then, this will be treated as oldest open item after 20/10/2011..
If you are creating document on 22/11/2011, the system will block the new order as this document exceeds the count (count in OVA8 is 1; whereas, this document is older than 2 days)..
Hope this clarifies about oldest open item and when the system will block the sales order..
Check in FD10n, this will show you all details clearly..
If the credit block is set, still you are able to create delivery, check any seasonal factor or checks in financial A/R summary is maintained (if anything)..
thank you
Venkatesh

Static credit check: credit limit exceeded for consignment issue delivery

Hi,
We are encountering a credit limit exceeded error in delivery creation for a consignment issue.
In SPRO config "Credit limit check for order types", no credit limit check is assigned to the order type. However, there is one assigned for the delivery type. Also, for CCAr/Risk cat./CG combination in OVA8 (Auto Credit Block Delivery), static credit check has been activated with error message reaction. Open orders and open deliveries were also activated. Customer exceeded credit exposure but user cannot release the order in any VKMx transactions as no credit limit check is assigned to the order type.
Given that this is the current setup, and the following conditions:
1. Credit limit for the customer cannot be increased
2. Oldest open item cannot be cleared just yet
Is there any way that we can proceed with delivery creation for this customer? The other order types have credit limit check so credit management team was able to release them. However, we are unsure on how to proceed with this consignment order. Kindly advise and thank you in advance for your help.

We are encountering a credit limit exceeded error in delivery creation for a consignment issue.
but user cannot release the order in any VKMx transactions as no credit limit check is assigned to the order type.
Looks contradictory and it may need to run report RVKRED77 to reorganization of open credit values. Try to run the report in test system and then run in production system. After running the report, the use must be able to release in VKM* transaction.
Regards,

How to allocate inventory on sales order saving and before credit blocking

Hi gurus,
Hope you can assist us in our issue. We are a food manufacturer and we had setup our availability check to CH and our MRP Type to PD. The problems we had encountered are :
1) If the order quantity is more than the available stock, it does not allocate anymore (for example - if order is 500cases and the available stock is 300cases only) and;
2) the allocated quantity after sales order saving changes after credit releasing (procurement tab) and sometimes becomes zero
Implication is that we can not rely on the availability check at the same time credit block is again activated once we edit the sales order just to allocate. Are there other config settings that we need to revise/update?
Your immediate help is needed. Thanks a lot.
Frances

Rahul,
Thank you, but this I need automatic as if I requiere my users to manually change the setting they will not and the order will go through. I heard somewhere that with the combination of SPs and authorizations this could be done however I don't know how.
Any ideas?
Thanks,
GAC

Unconfirmed line items of a sales order into account in credit management

Hi Gurus
Updated the customer orders via prog. RVKRED09.
There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure equals item 10 and 30. So my 1question is: Where is the setting that does not take unconfirmed line items of a sales order into account in credit management?
Thanks in advance
Regards
Nalini Iyer

Hi nalini
Even though , you create a sales order for that line item , but if that item is not confirmed then the value wont be considered. into credit exposure. .
But once it gets confirmed then the value will be taken into credit exposure..
Regards
Srinath

Error in VA01 - "Sales order cannot be processed. Check customer type."

Hi,
While creating a Sales Order in VA01, I receive this error message - "Sales order cannot be processed. Check customer type."
Could you please tell me what could be the reason for this.
Thank you,

Hi,
U Can Find the Customer Type in Extras> Account Group Information> Customer Types.
There U can Make the Customer Type.
Regards..
Praveen Kumar.D

Warning message is thrown,while raising a sales order Warning message:

When i am raising the sales order,warning message is thrown stating "No financial document",can any one solve the problem.

It is because, the said field (LCNUM) is made as mandatory in your settings. While creating sale order, go to header tab "Billing Document" where you can see this field. Press F4 and maintain the relevant licence reference.
It seems you were trying to create an export sale order where the terms would have been L/C. For information, to create an export L/C, the TCode is VX11N and once you give all the required data and save, system will pop up a reference. This reference number has to be assigned in sale order
thanks
G. Lakshmipathi

Accounting No not Created For Sales Orders when Processed thru Credit cards

Hi Experts,
I was able to successfully post FI document through Billing document in SD.
The Problem is encountered when a Sales Order is created
for Credit Card customers.
When the sales order is created the credit card information we are prompted with an error message Payment terms is a required field for G/L Acc so and so...
The payment terms field in the posting key 01 is marked required and the same field for the reconcilation account is optional. However this config has not created any problem for the Non credit card sales orders.
If any one has faced the same problem. Please help me out in this issue.
Thanks,
Chaitanya

Hi Friends,
Please refer SAP OSS Note 119047.
In the OSS Note they have mentioned..
Pass the payment terms to the field
xaccit-zterm = '0001'. in the User Exit.
Program : LV60BF0C,
Customer Function '002'.
Include File ZXVVFU02.
SE 37:- EXIT_SAPLV60B_002
Still I don't understand why SAP doesn't support payment terms for Credit Card. But when a Sales Order is created without credit card the field xaccit-zterm has a value.
Thanks,
Chaitanya K

Sales order- Warning msg Static credit check

Similar Messages

Maybe you are looking for