Sales Orders not to be created for certain customers via legacy

Hi,
We have an inbound interface from legacy into SAP which creates Sales Orders in SAP. But we have a requirement where the business does not want sales orders to be created for certain customers in SAP via the interface.
To prevent the sales orders from being created for those customers via the interface, we have created entries in the look-up tables (Hope other projects also use lookup tables and are aware of what are look-up tables). But still the sales orders are being created in SAP for those customers via the interface.
What else should we do to prevent the sales orders from being created for those customers.
Thanks in advance.
Mick

Hi ABAP gurus, need your help on this one. Any help would be greatly appreciated.

Similar Messages

What setting to mandate that invoice is created based on sales order NOT...

Hi,everyone
Could you tell me the detailed configuration to mandate that invoice is created based on sales order NOT delivery documents.
Additionaly, I need to define this rule at headquarter and apply it all lower-level companies. how to do it.
thanks you very much

Dear Humility,
Could you tell me the detailed configuration to mandate that invoice is created based on sales order NOT delivery documents.
This is quite possible through copy control settings between sales order and billing document
In standard billing type F1 will billed with reference to the sales order OR,so you can copy those settings then rename to your document types and itemcategory.
Go to VTFA transaction click n change icon then select billing type F1 and order type OR then click on Copy As icon (F6)and change the document types(maintain your docuemnt types).
To copy item level settings
Now you come back to initial screen agin you select billing type F1 and order type OR then click on item here you select standard item category then click on Copy as Icon (F6) here you maintain your itemcategory.
Note:- Don't change the satndard settings you just copy
Additionaly, I need to define this rule at headquarter and apply it all lower-level companies. how to do it.
For this you can take help of your BASIS people they will full fill with the roles and authorisation settings.
I hope this will help you,
Regards,
Murali.

How to stop sales orders from contracts from qualifying for Rebates.

We have set up rebate agreements for customers and they are working as expected.
Now our sales people want to start using contracts for some special deals for certain customers and products. But they DO NOT want these sales orders from these contracts to qualify for rebates.
Does anybody know how we can set this up or if it is at all possible?

Hi Zoya,
I got one more idea and so try it out.If it sounds foolish please ignore.Instead of going for userexits its better you go for a different sales order type whenever you refer to a contract.And make sure you assign a different pricing procedure which does not contain the condition type BO03 at all.Ofcourse this new sales document should have a different document pricing procedure.
Regars
Ravi Kiran

Changing the status of the sales order item based on reason for rejection

Hi All,
When a Sales order item is rejected then the status at the item level is changed as 'TECO'.When the reason for rejection is removed the status 'Teco' is reset.This status change can be achieved using the user exit 'MV45AFZZ'.But the exit does not allow re-atp calculation whenver a blocked item is release.I have use the exit 'MV45AFZB' ,through this the status change as well as re-atp calculation takes place.But the status changed(Based on reason of rejection) does not appear in the same screen.The change gets reflected only when the sakes order is saved and i open it again.
I want the status change to appear in the same screen.I am doing my code in the form 'userexit_check_vbap' of the exit 'MV45AFZB'. Please let me know if there are any user exits or BADI's available for the same(Changing the status of the sales order item based on reason for rejection ).
Regards,
S.Subasree

Hi subburamaiah
If you want the report you can create a separate SIS report . In that take the input field as a Reason for rejection.. and ask for the output the list of sales orders .Now when you check this user defined report you will give the reason for rejection and check what all orders got rejected on that reason for rejection.
Regards
Srinath

VERSION FIELD FROM SALES ORDER NOT APPEARING IN COOIS REPORT

DEAR ALL,
I am working on make to order scenario. Version field from sales order not updated when im taking MRP Run for specific Sales order in COOIS Report. But when iam creating production order with T. COde CO08 field getting updated. Its very important to get vrsion field as we have maintain old sales order No. in same. How this problem will get resolved?
Regards
Atul

Atul,
"MRP run" does not normally create production orders, MRP creates Planned orders. Planned orders do not contain Sales order version. I have never used this field before, but I would not be surprised if the behavior you are describing is 'standard'. When you create a production order using CO08, you are creating a 'production order with reference to a Sales order' (which contains Sales Version). When you create a production order using, say, CO40 or CO41, or using a program such as PPBICO40 in Batch, you are creating a 'production order with reference to a Planned order', (which does not contain version).
If it is imperative that you have the Sales Order version number in all production orders, you could see if Planning Strategy 82 (Assemble to order) production orders contain the data you seek. Otherwise, I am afraid you will have to have your ABAPers write some custom code to update this field in the production order.
Another way to get sales order data into the production order, that does NOT require custom code, is by using Item Texts in the Sales order. Any text placed in the Sales Order Item Text Field Production Memo (Text ID 0006) can be configured to be duplicated automatically in the Production order in an MTO environment. Production Memo then displays as another Tab in CO02.
Regards,
DB49

Sales Order not Valid During Vendor Clearing

Hi,
When I'm clearing vendor open items (both normal & special GL transactions) i'm getting an error message "Sales Order not Valid". How do I correct this error?
Thanks,
Chaikaru

Hi ,
As you're saying that the order got saved already with confirmation, you can try re-doing the ATP check on the SO item. If the order item is not present in SCM, system will throw an error with the message "APO: Order Doesn't exist".
You have mentioned that CCR did not detect the inconsistency, have you by any chance selected check box "use VBBE table"?
You can try resending all the Sales Orders to SCM by running Initial Supply (report RIMODINI) for Sales Order Integration Model., monitor the queues in /SAPAPO/CQ. Alternatively, If you're using Inbound queues in SCM, you can only check SMQ2 in SCM and if you're using Outbound queues in ECC, check SMQ1 in ECC to monitor the queus.
regards,
Mohan

CRM Sales Order Not getting transfer to ECC System

Hi,
We had created one sale order in CRM and created sale order is not getting transfer to ECC system. BDOC are ending into error status and following are the error which is getting generated
ERP adapter is called
item is not to invoice0000000010
Service that caused the error: CRM_1O_DELTA_MOB_MBDOC_SRV
We had cross check the item category in CRM and ECC system and it seem to be fine.
We had tried opening the document and it is gettinh opened suceesfully also.
In case if any one had face this issue then please let me know the solution step to get this issue resolved.
With Regards
Ankush Rai
9423404043

Hi Anukush,
To replicate a sales order from CRM to ECC you should have following prerequisties.
1. Master Data: Customer, material should exist in both the system
2.Organization Structure like Sales Org, Division, Distribution Channel (Sales Area) should exist in both the system
3.Same Document Type,Item Category, Item Category Determination should exist in both the system
4.Same Number Range should exist in both the system
Best Regards,
Rajendra Sonawane

Sales order: Two schedule line items for single order item

Hi,
I have an issue with the schedule lines in the sales order. When we create a sales order with today as the delivery date, it creates two schedule lines for the single order item. But if we give future date as the delivery date, then it creates one schedule line only. The confirmed quantity for the first line item (with today we the delivery date) is zero and second line item confirmed quantity (with delivery date as tomorrow) is actual order quantity. So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do we have stock.
We donu2019t have availability check on and we use custom line item and schedule line categories.
Please give some hints on what might be the issue.
There was on post with this kind of issue, but it was closed without answer.
Thanks,
Srini

Hi Srinivas,
So as there is no confirmed quantity on todayu2019s date, it looks like it is creating new line item. But we do have stock.
As per my understanding although you have sufficient stock for the material system may be confirming the quantity in future date because of the forward scheduling. As you know system adds different times while evaluating the confirmed delivery date. Check the route which system is using.

Change the Tax Code- In Sales Order i have Tax code for VAT

In Sales Order i have Tax code for VAT ( Condition type JIVP) it is reflecting "P4" instead of "A4".
Where the "P4" Tax code is picking in Sales Order.
How to change the Tax Code.
Urgent

Hi CHAKRI,
Check if the condition record is maintained with the appropriate taxclasssification.If yes, Go to sales order in change mode,then goto-header-billing-alternate taxcalssification and modify tax classification.It will pick up right tax code.
Regards
Ram Pedarla

How to check the sales orders that have been created with an Rebate Agreeme

Dear Experts,
Do you know how to check the sales orders that have been created with an Rebate Agreements?
Thanks!!

Hi Hoo Laa,
I have one way but little lengthy.
Rebate condition always appears in the billing document.
So 1st you extract the sales order list from Table VBAK.
once you have the sales order list then you can put your order list in Table VBFA --> Extract the billing document list.
Now put that list in the table VBRK.
In VBRK you will get the "Doc. condition" --> put that doc condition in table KONV with your rebate condition type.
It will show the result.
Later, through VLOOKUP you can identify in which order you have given rebate to your customer.
Already said, Little lengthy
Regards,
MT

Determining what views are created for certain structure

Hi!
I need to create some views to structure in Development system as it is done in Production system already. It is something like manual transfer of structure and it's views from Production to Developement system (special case).
My question is this: how to determine what views are created for certain structure?
Will reward,
Mindaugas

Use 'Where-used' list for that structure.
Go to SE11.
Enter the structure name.
click on the Where-used list button in the toolbar.
Select the applicable options. (In your case 'Views')

Did not receive activation code for lightroom purchase via email

did not receive activation code for lightroom purchase via email

Cloud programs do not use serial numbers... you log in to your Cloud account to download & install & activate
Some general information
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html

ARRIS NVG599 Wireless Router is not a great product for Gigapower customers!

AT&T your new ARRIS NVG599 Router/Wireless is not a great product for Gigapower customers. The built in wireless on this device really has poor quality. My previous 2Wire589 had a lot better reception and quality. At least when it was a 100% I was able to get full range in my home. With the ARRIS NVG599 coming in default 100% for the wireless the range is very poor to include speed quality with just one wireless device on it. My friend and I who both have gigapower have the save exact issues and live in two different parts of Austin, TX area. Our wireless receiver with uverse keeps freezing and pixelating. Very irritating!!! The tech you sent to my house by the way did an outstanding job in triaging this poor hardware setup you give to your Gigapower customers. I felt bad the for guy because he was stumped just as much as I was. Luckily I was fortunate enough for him to see my issues with the wireless TV box. The tech cleaned the fiber pair. Signal quality was still great before and after the cleaning. Recrimped all copper line. Again Layer 1 is not the issue when it comes to cabling. Only layer 1 issue is the hardware. He even replaced my router with a new one and the wireless quality became worse. He's like the fifth tech to come to my house provide great support since I was upgraded to the new ARRIS NVG599 router. So again this particular model you are giving us really isn't great and I am hoping you all are looking for a better quality product such as the 2Wire or Cisco product. I prefer Cisco quite honestly. I am very disappointed as I never had issues with my 2Wire. Only issue was not getting my true Gigapower speed due to hardware capabilities. You all need to allow your customers to customize their own routers. Why do I have to use AT&T's DNS for DNS? Why can't I use OPENDNS which is a lot more safer my family since we have younger children. I mean if all else fails due to customer issue you can always do a hardware default reset. All if you can stay away from this router they provide as it really is a poor quality of a router and most of product for gigapower customers!

You can change it away from 192.168.1.0/24. But you cannot change it anywhere under 10.0.0.0/8. But 192.168.2.0/24 is fine, and I've heard of people using 172.16.0.0/16 as well.
The DNS is locked in part due to the double (or triple) duty as a gateway for TV. You can always purchase your own router and install it behind the NVG 599 and set it up for whatever DNS and/or subnet you want.

Sales Order Not Checked for Credit Limit

Most of the time, in our course of business, the customer account and BP/Credit limit are setup prior to the input of any order.
However, if in the case the customer was setup (BP created in background, but segment/credit limit not assigned yet), and an order was created immediately the order will not be checked for credit.
We are considering putting a check in the order that it must be checked or it is considered incomplete.
We have a background job that runs every few hours to assign the BP to the credit segment (we have only one credit segment, in addition to 0000) and give a default credit limit. But we need to ensure that all orders are checked.
How are others handling this situation?
Thanks

We have already put in place the use of a background job to create the BP/segment with a default credit limit.
We are hoping to come up with a method that is full proof and not manual.
Depending on how frequently the job runs and the timing between that and setting up a customer master record and entry of a sales order, there could be a sales order entered before the background job was completed.

Copy control for opportunity to Sales order not working

Guys,
I am working on CRM 2007. I set up the copy control for transaction types so that I can convert my Custom Opportunity type to a Sales order.
However when I am in my Opportunity and click on Follow of transactions, my order type is not availabel in the selection list.
I was able to set it up for Lead to Opportunity but opportunity to Sales order is not working.
Any help on this?
Ani

HI Anirudh,
I have a similar requirement such as Copying line item from Complaints to Returns application.
Procedure:
1. Firstly i create an complaint
2. create a follow up document as Returns
3. I enter an product in the complaints and when i click on Copy to returns the line item has to be copied.
Here is the requirement. The line item is copied, but here the problem is, .... The line item doesn't get copied unless and until the instance of the target is retrived.
Could u please help me on this ?

Sales Orders not to be created for certain customers via legacy

Similar Messages

Maybe you are looking for