Sales org specific error

Hi,
I have maintained "E" in OVAH for message no 115.(Purchase order number in document number: & already exists).
(Error- If user enters same PO no twice in sales order than System throws error).
It gives error in sales orders created for all Sales organization.
Requirement
Error should throw for orders created for only one sales organization.
Thanks,
Vrajesh

Hi,
This is a common requirement. One approach is to adjust routine VBKD-BSTKD_PRUEFEN in program FV45KF0V_VBKD-BSTKD_PRUEFEN.
You can repair the routine or, if you have ECC6 you can use an "implicit enhancement" which doesn't require a repair (see here: http://www.sapdev.co.uk/enhance/eframework/ef_implicit.htm). Note: there's a missing step in that link - you must click the 'enhance' button in SE80. The button's icon looks like a spiral.
Add this code into VBKD-BSTKD_PRUEFEN right under the form declaration:
check vbak-vkorg = '1000'. (replace '1000' with the organization you want to check.)
Be careful - this will have the effect of completely disabling PO checks for all sales orgs other than 1000. If that's not what you want you will need to write the appropriate ABAP code...

Similar Messages

BP not Valid for Sales Org - Web Client error

Hi,
We are currently upgrading from CRM 4.0 --> 2007. We have multiple Sales Organisations and different business roles. In the Web Clients we have a number of transactions. When we try and add additional users from other sales orgs to these activities/transactions we get the following error "BP not Valid for Sales Org".
In CRM 4.0 for the various Interaction Centers we never got this error. We were able to add additional users from other sales orgs to transactions.
Mt question is - How can we stop this error from occuring , so that we can add additional users from other sales orgs to these activities/transactions in the various Web Clients.
Any help on this would be greatly appreciated,
Thanks,
Dan

Hi,
This error is appearing for the addition of employees. These employees are set up in the Org model for the relevant Sales Org's, yet the error still appears.
How would you go about adding employees,contacts etc from different Sales Org's to transactions (i.e attendees for an audit) in a Web Client that is set up to be Sales Org specific.
Regards,
Dan

Sales Org Creation.

Hi Gurus,
What is the Major changes that will happen when we create More ( more than one ). sales Organisations. Any extra assignments will come or any FI enties will happen?
Give me the detail view. Wt are the advantages and disadvatages when we created more sales organisaions.
rgards,
jyothi.

Hi,
If you r creating a new sales org (more than one)
following activities has to be done:
in IMG
*create sales org -
assign sales org to comp code
assign dist channel to sales org
*assign div to sales org
*set up sales area
*assign sales office to sales org ( if u maintain any sales office )
*assign plant to sales org-dist channel.
*Business area-BA assignment has to be done( if BA derivation rule is based on sales aera)
*Pricing procedure determination has to re-check
*Account determination has to check -VKOA(if any table based on sales org )
Master Data
*Customer Masters has to extend to new sales area
*Sales Material tabs has to maintain for the materials
*price condition records has to generate which is based on Sales org specific.
*hope it helps

Error : Sales Org.Unit does not have these attributes -- Urgent

Hi, Team,
I am unable to create a service order with serivce material ( Only installation visit charges ) for w/o warranty product .
I am getting error : " Sales Org.Unit does not have these attributes "
I had checked the related Org data of respective sales org , already the sales area combination is also maintained from R/3 with required attributes "
Pls revert with possible solution .
Regards,
VCS

PePe :
Thanks for reversion !!
Basically it is a product Service Material (Servicing Charges), where in I had checked in the transaction , Though the required sales area is well maintained in the R/3 System and is being replicated to the CRM .
When I checked the product Service material , the required comination is missing and could find other sales area combinations .
Pls guide , how to go to get this resolved .
Regards,
VCS

Changing proposed delivery date in sales order for one specific sales org

Hi All,
I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
Thanks in advanced.
Points will be awarded.
Regards,

EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

How to make Sales Person LOV org specific in case of Multi Org Setup

HI,
We are working on 11.5.10.2
We have a multi org setup and i am required to make the sales person LOV to populate only the org specific salespersons, at the sales order, quote, service contract levels.
Is it achiveable and if yes.....please letme know the way.
Reg,
Ajay Agarwal.

Hi
Try to play around with the security profile in the HRMS and attach it to the responsibility level
Regards
Ramesh Kumar S

BP im multiple sales org :BDoc BUPA_REL   error

IN CRM we have a sold-to BP maintained in two sales org 1000 and 2000 and its
                                 ship-to maintained only in 2000 sales org                                 in CRM system ( CRM 5.0 )
Those are replicated to ECC
(   I used FM BUPA_MWXT_CREATE_MAIN_BDOC to replicate BP to ECC ...
it worked fine ... sold-to created in 1000 and 2000 and ship-to are crated in 2000 sales org in ECC . )
Now I'm trying to replicate the BP relationship to ECC using FM 'BUPA_MWXT_CREATE_REL_BDOC'.
At this point BDOC BUPA_REL is giving error as
: Customer XXXXXX (SHIP-TO) has not been created for sales area 1000.
I know ship-to is not maintained in 1000 sales org ...but I want the relationship to be maintained for 2000 sales org .
How can I acheive this?
By using 'BUPA_MWXT_CREATE_REL_BDOC' I want to maintain relationship only for 2000 sales org.??
Let me know if you ar not clear wiht the question
Edited by: aday rao on Sep 16, 2009 11:13 PM
Edited by: aday rao on Sep 16, 2009 11:18 PM
Edited by: aday rao on Sep 17, 2009 9:40 PM
Edited by: aday rao on Nov 2, 2009 10:09 PM

In my case I was trying to create a sales rep manually and when I did that
no 'Personeel number' (BP- Employee Role -Identification Tab) was getting assigned to it, hence the error.
Check for the value in this field for the BP which is throwing the error.
Table - BUS000EMPL
Field - EMPLOYEE_ID
Reward point , if info helps.
Regards
Pallav

Ppoma_crm Error in Sales Org.

Hi Friends,
I have CRM 4.0 server and R/3 4.7 server , I got a error message at using PPOMA_CRM for selecting R/3 sales org in CRM server.
The message is "Error during RFC connection to OLPT system" , If using the same in next time , I got the message "No entry found".
Already got the RFC connection CRM to R/3 as well as R/3 to CRM. Please give the solution for this problem.
Thanks & Regards,
Marichamy.A

Hello
I know it is a long time ago since this question was posted on the SDN but I have a similar problem.
I had the same problem in ppOma_crm with that RFC Connection on my development system. After executing CRMC_R3_ORG_GENERATE I saw that there is a wrong RFC connection set. It is pointing to my production system (I made systemrefresh (systemcopy producte to dev system)) a couple of weeks ago.
Do you know where I can change the RFC destination connection of CRMC_R3_ORG_GENERATE respectively PPOMA_CRM?
Thanks in advance and Regards
Marco

Fld defaulting to specific sales org for user even though Parameter not set

Hello,
I have a problem, for a specific user, where the sales org field is defaulting to a specific value even though his parmeter ID is not set for VKO. For information, the sales org value no longer exists (invalid). More over, the problem exists only for a particular transaction, MM41, MM42 and MM43. When he tried VA01 the prolem of the sales org value defaulting does not happen.
I have tried MM41, 42 and 43 with my user ID and it works properly. We use CUA but parameters are locally maintained in each child systems as this is logical. i reset the buffers (/$sync) just to be sure (as this is not a live system) but this does not help.
Any ideas?
Regards,
Prashant

Hi Prashanth,
at our end we do not have a retail-specific maintenance function, but i guess the problem arises when the user has entered the sales organization and saved it as " default areas of validity", try using a blank entry and then click on the tab for default areas of validity - it "could" solve the problem

Restrict F4 search results for specific plants / sales org / purchasing org

Hello All,
We have a project where a particular plant / sales org / purchasing org needs to be restricted because of the top secret data for that business. We would like to be able to restrict the search results that are displayed based on sales org / plant / purchasing org in the F4 help. If a user does not have access to the data / documents related a plant / sales org / purchasing org, we do not want the user to be able to see doc numbers, ship-to's, material numbers etc... My question is where do we restrict F4 results for the Sales and Distribution, Finance, Materials Management, Production Planning, Logistics, etc... modules? Thanks in advance for the help.
Jordan

We can set authorization for specific plants and other organization levels,contact the basis team and discuss about the authorization

Invoice Layout configuration for a specific customer within a sales org.

Hi,
I have a situation where the invoice layout need to be configured for one particular customer within a sales org in a different style from rest of the customers.
Could someone let me know how to do it please.
Thanks.
Best regards,
Srikrishhna

By u201Cinvoice layoutu201D, I assume you mean layout of the print output. If so, then
u2022     Set up a new output type as a copy of your standard output type. Assign an access sequence containing customer.
u2022     Add the new type to your active output determination procedure and assign an appropriate requirements routine (if any).
u2022     Assign a layout set (smartform, sapscript, adobe, etc.) that meets your customeru2019s requirements.
u2022     Maintain the condition record.
And away you go.
Regards,
zKen

Position belongs to specific Sales org able to see data from another Sales

Hi experts,
Settings in ppoma_crm done.
Moreover, new infotype for Business role created and asigned to respective org.
SALES_EMPL is able to see any account that doesnu2019t belongs to his sales org.
Roles in user SALES_EMPL ROLES:
BP_SLS_EMPLOYEE, SAP_CRM_BUSINESS_PARTNER, SAP_CRM_OR_USER, SAP_CRM_UIU_FRAMEWORK.
Could you please inform us if we need to add a new Role to this user in SU01?
Thank you!

Hi experts,
Settings in ppoma_crm done.
Moreover, new infotype for Business role created and asigned to respective org.
SALES_EMPL is able to see any account that doesnu2019t belongs to his sales org.
Roles in user SALES_EMPL ROLES:
BP_SLS_EMPLOYEE, SAP_CRM_BUSINESS_PARTNER, SAP_CRM_OR_USER, SAP_CRM_UIU_FRAMEWORK.
Could you please inform us if we need to add a new Role to this user in SU01?
Thank you!

Multiple Alternative ID 's dependent on Sales org

Hi,
Our CRM box is used by multiple countries and share the same product master. In addition to the Product ID each country has its own specific country code.
To achieve this, we have created multiple settypes and assigned to alternative ID's.
Now we dont know how to make these alternative ID's dependent on Sales org. eg: ZALT1 is for Sales org 10 and ZALT2 for Sales org 11.
Has anybody faced this requirement and able to find a solution.
Regards,
Shaik

HI
An alternative ID type can only be maintained in the header area of a product if it refers to a field from a single-line, organization-independent set type. As per my understanding I think Alt id is not supported for distribution dependent set types.
Hence during the step "Create UI Configuration for ID Type " there is an error.
Here is a workaround (without Alt ID)
Create distribution dependent set types.
follow steps to add distribution dependent set types to product:
http://sites.google.com/site/rupeshpatil/tweets/prddcconfig
Now you would need to enhance the product search component to search by these new fields.
Hope this helps
RP

Restrict SaTy for 1 Customer in a Sales Org

Hello,
I have a scenario where a specific sales document type is to be restricted for 1 customer. All other customers for the particular Sales Org / Dist Channel / Division are to use this sales document type except for this customer, and my user would like a hard stop to be enforced (i.e. stop message) when attempting to enter an order in this specific sales document type for this customer. If a different sales document type is specified prior to sales order entry, the order should be created for the customer.
Is there any master data or standard configuration that could allow this scenario to work?

hi andy;
you have three options here:
1. create a Z table for the same the same with fields SALES ORGN/DISTRIBUTION CHANNEL/DIVISION/CUSTOMER NUMBER & SALES DOCUMENT TYPE which you want to restrict - this re usable any number of times because you will maintain in MAINTAINCE view inside Z table.
2. HARD CODE these SALES ORGN/DISTRIBUTION CHANNEL/DIVISION/CUSTOMER NUMBER & SALES DOCUMENT TYPE which you want to restrict & this is permanent setup but when ever you want to change it you need to go to the program MV45AFZZ : USEREXIT_SAVE_DOCUMENT_PREPARE will trigger to throw an E - ERROR message.
functionally :
3. block the customer with respect to the sales area in Go To T-code XD02-->
Extras-->bloc the customer or you can use XD05 for the same. but here blocing will not happen basing on the sales document.
please choose for which one you want to go with.
hope this clears this issue
balajia

Partner function should be mandatory for a perticular sales org

We have a requirement to make Sales representative assignment to the sold-to-party mandatory , during order creation ( for a particular sale org) . We have to generate incompletion log for all the orders where this partner function is missing in the header data . Please throw some light on how to do this.

Dear Satya,
I don't think it is possible sales organisation wise
But you can have this requirement sales document type wise or item category wise or Customer account group wise through maintaining the check mark for sales employee partner function in the Mandatory check box at partner functions in procedure step in the partner dtermination.
Because partner functions maintained in the prtner procedure that procedure will assigned at these levels.
Customer Master
Sales Document Header
Sales Document Item
Delivery
Shipment
Billing Header
Billing Item
You can do like this
You define different customer account group for that sales organisation
Define new Partner determination procedure through copying existing standard one
You activate mandatory check for sales employee partner function in that new prtner determination procedure.
You assign this new procedure to the account group which is sales organisation specific.
Now you create customer master data with that account group in that specific sales org now system will give the error message if don't maintain the sales employee in that customer master data>sales area data>partner functions tab.
Before going to create customer master you create Sales employee master throuh VPE1 transaction.
Still not satisfied
Try with these User Exits with help of ABAPer
User Exits for Partner Determination
Partner determination contains the following user exits for your use:
EXIT_SAPLV09A_001
You can use this user exit to control whether an address that was entered manually and has already been used in other documents (referenced), should be referenced again if it changes or whether a new address shold be created (duplicated).
EXIT_SAPLV09A_002
Call up this user exit if a customer has not been maintained in the current sales area.
EXIT_SAPLV09A_003
Use this user exit to control the origin of partners in the partner determination procedure (origin X, Y or Z). If X, Y, or Z has been entered in the Origin field, this user exit is automatically called up during partner determination.
EXIT_SAPLV09A_004
Use this user exit to integrate your own check in a program, that runs before the partner is saved in the document.
For more detailed information, see the program documentation for each ofthe user exits.
I hope this will help you,
Regards,
Murali.
Edited by: Murali Mohan.Tallapaneni on Dec 15, 2008 10:47 AM
Edited by: Murali Mohan.Tallapaneni on Dec 15, 2008 10:50 AM

Sales org specific error

Similar Messages

Maybe you are looking for