SAP 2007 Patch 08 License error

We installed SAP 2007 and registered the new Hardware key in the SAP channel and applied a single license for installing the addon, profession user, Sdk etc.... After updating the License we upgraded the system to Patch 08. We installed the our Addon.It was Connected Successfully.The addon worked fine for us. We stopped the Addon manually and started once again the Addon. On that time we are getting the error "License was fully used " When we close the SAP application itself and re open the application the addon is getting connected successfully. The same addon is working fine with all other patches of SAP2007. Please tell us what could be the problem
Thanks in Advance
Madhu

Hi Madhu,
I usually facing this kind of error when SAP B1 client crash and tried to run again the B1 client. This is due to the fact that the license server still record that you are in the system and once more tried to connect to system.
In case of your add on, usually it's related to the terminate process not ended successfully when it was stopped manually. So when you close the B1 client n run again the add on, it works.
If you facing the problem once again, try to stop and start the license server. It will reset the license server to the correct state.
Cheers,
Dody

Similar Messages

Cannot save query in SAP 2007 Patch 11

Hi,
I urgently need assistance here.
We have created a query in SAP B1 2007 Patch 11. However, when we save the query, we received the following error.
'To generate this document, first define the numbering series in the Adminsitration module'.
To make it slight completed, we copy some queries from another company using Copy Express.
Your advice is highly appreciated.

Dear,
Please give the link to download PL15
Thanks in advance
Gauraw

Error occured while opening SAP Data services designer - license error

Hi When i open sap data services , error has been attached. I followed note-1826666 , but it didnt work. I was following note - 1812861 , but not able to understand where i can find directory WOW64 and what exactly to be copied as per first point. Not able to understand its 2nd point also that says - "Add it to the properties mask of the cluster node configuration under the registry section" Our BO DS has operating system windows server 2008 R2 enterprise. Kindly advice hw to proceed.

Go to the License Manager and Update your BODS license. When you are opening the BODS you will able to get the version.
Log on to the CMC then click on the Help and then about, you will get the total information.
Thanks and Regards
Joydip.

Installing SAP Netweaver sneak preview license error

Hello all,
I have appiled and recieved a license from SAP.   When I tried to install it using saplicense command, I got the following error.   Please help, I am not sure how to set the dbms_type and DIR_LIBRARY environment variables.   I am using MYSQL and installed the NW portal under Windows XP professional SP2.
C:\usr\sap\J2E\SYS\exe\uc\NTI386>saplicense -install ifile=c:\j2e dbms_type=maxd
b DIR_LIBRARY=\usr\sap\J2E\SYS\exe\uc\NTI386
SAPLICENSE (Release 700) ERROR ***
    ERROR:   Can not set DbSl trace function
    DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
    RC-INFO: error loading dynamic db-library - check environment for:
             dbms_type = <db-type> (e.g. ora)
             DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
thanks

Hello Ruchit,
I switched to use j2eadm acct to run saplicense -install ifile=licensefile. It seems the environment variables are set correctly by default but it complains about database connection this time.   Here are the error message:
C:\usr\sap\J2E\SYS\exe\uc\NTI386>saplicense -install ifile=c:\j2e
SAPLICENSE (Release 700) ERROR ***
    ERROR:   Connect to database failed
    DETAILS: DbSlConnect failed with return code 99
SQL-ERROR -4008 (check DB manual for explanation)
Best regards

Upgradation error SAP 2007 B to patch 11

Hi experts,
i have been trying to install "SAP 2007 B client" at one of our PC, with operating system as Windows XP sp 2.
Installation get completes successfully, but while upgrading SAP 2007 B from patch 8 to patch 11 gives in an error.
The error says
" ERROR : Error accessing Parser Dll -
C:\Docume1\ADMINI1\LOCALS~1\Temp\{3B7CBDC4-20D1-4E0F-8E36-ADFED7E767E5}\CreatorDll.dll "
If anyone of you have face similar issue please help.
Regards,
Narendra

Hi,
I could find the solution for installation....i tried installing SAP 2007A in one of many PC having "Windows XP sp2" ....i got successful with one of them having able to upgraded the patch level to 11. I dont know how it hppened but was able to get through the patch upgradation.
Next i again installed the SAP 2007 A patch 8 to the earlier Windows XP client PC, this time not running up gradation "patch 11".
Next i copied the C:-> Program Files-> SAP---> SAP Business One folder from the working client PC to the PC which was giving me the error....Its strange but worked for me!!!
Thanks for all ur replies.

Error in connection SAP 2007 B PL 11 client to SQL server

Dear All,
I am using SAP 2007 B PL 11. Whenever i am doing change server on client systems and entering the SQL server name and pwd the system gives error:
Connection failed:
SQLState: '08001'
SQL Server Error: 0
[Microsoft][SQL Native Client]Unable to complete login process due to delay in opening server connection
If i directly punch the IP address of the server then it immediately shows me the company lists. When i select a company and then enter the sap user name (manager) and pwd then it takes almost 3-4 minutes to connect to the company.
Can anybody please help me out on this issue.
Regards,
Rahul

HI,
I checked it out from SAP. They said that this problem is caused when multiple network card are installed on the sap server. They gave the below mentioned solution as a workaround:
SAP Business One client (not installed on the same machine as the
license service) might take several minutes to log you on successfully due to a delay in establishing a connection with the license server.
After logon, SAP Business One functions as expected.
This is due to the fact that the server or PC on which the license server is installed has more than one network card, or there is a dial-up & VPN interface-configured server.
Note: This can happen when you install the license service on a machine with more than one network card ALREADY installed.
Installing additional network cards on a single network card machine with a license service already installed might not produce this issue.
Other terms
SAP Business One, slow, login, log-in, delay, license, server, NIC, VPN, connection.
Reason and Prerequisites
Application error.
Solution
This issue is a candidate to be resolved in a future release.
Until then, you can use one of the following workarounds:
1.Disable additional network cards in the Network Connections. Also make sure there is no dialup interface or VPN interface set up, and restart the server. Note that you can re-enable the additional network card after the restart. This will resolve the issue until the next restart.
2.Install the license server on a machine with a single network card.
3.Disable all network cards, restart the license server and then enable the network cards again.

Error in creating DLN on SAP 2007 01 PL07

Hi Experts,
Our profuct has been used by multi clients for years, and everything is working fine until one client upgrades to SAP 2007 01 PL07. The user was working properly at beginning, and got a error in creating DLN, then the user will not be able to create DLN any more, then the user has to logout and login the SAP to create DLN agian. the error will be trigger pretty often,and error msg is: the requested action is not support this object.
the error is only hapened on one of our clients, and we struggled for long time, but could not fix it out.
Any suggestion or recommandation will be more then welcome!
Thank in advance.
Austen

You may check these:
The requested action is not supported for this object
Errors not listed in the documentation...

Authorization Error while extracting data after applying SAP upgrade patch

Hello All,
Recently we have updated the SAP BW patch to 24 and ECC patch to 22. I have the access to perform extraction in RSA3 tcode in ECC.
However, While performing the data load in BW, the process is failing at the Infopackage step with the following error:
"You do not have authorization to extract from Datasource XXXX, Component FI-IO. Message no. R8073"
My basis guy has given the necessary acces.. but still the issue persists..
Please provide solutions ASAP... its very critical issue...
Regards
Sneha

Hi,
Are you loading the data with your username? it may cause problem sometimes because you may not have the authorization object S_RO_OSOA assigned in your roles.
Try scheduling the loading job with the background user with which normally the process chains are run.
i guess this should solve your problem, if not try adding this authorization object to the corresponding role and you can run with your user name itself.
I am not sure about the auth objt , try and see.
regards,
karthik.

Customer Credit Balances upload probelm in DTW of SAP 2007 B Patch Level 11

Dear All,
I am using SAP 2007B Patch 11. When i am trying to upload customer credit balances thorugh the DTW of the same patch (11), then DTW shows no error and says uploaded successfully. But when i open the front end then the entries are not showing there. I am using oCreditNotes on DTW to upload the customer credit balances. I also checked up the table RIN1 but ot does not shows any record. What can be the possible issue?
Regards,
Rahul

Yes i did removed the 'Test Run' tickmark. Anyways i have managed to solve that problem as i have made some fields mandatory in the credit note form thorugh the Sp_Trsansaction stored procedure. After removing those validations the entries has gone perfectly.

License error connecting to Sap BW from BO InfoView

We installed succesfully the Sap Integration Kit Xi R2 , and the created the universe to connect to Sap BW.
But when we try to access from the BO InfoView to the Sap BW with a proper Sap user we recive an error like that :
"...Unknow user: all the 0 concurrent licenses are in use or the license code is invalid..."
We installed the proper license for the Sap Integration Kit, and the BO is in use and is working well.
We read note 1307794 but seems not usable in our case.
So we do not know wich is the error.
Regards

I'm reading a lot of post in intenernet, but it's difficult to find out wich kind of license is required on BO, if named if concurrent...
We installed the license coming with the Sap Inegration Kit, neverthless we have the error described before.
So we suspect there is something to do with BO licenses, but it's not clear what..
regards

Sap license error--error is "login not possible (error in license check)u0094

Hi,
I we are not able to login in our IDES r/3 system, it is showing login not possible (error in license check), only sap* is able to login . I have already applied sap license that will
Expires on 31-12-9999, I have old license also it was expired on 07-02-1996 it is under red light, second one under green light. I tried to del old one but system says through sap* not possible, only sys admin will do..what I can do now..

Hi,
When your license expired you can only login to the system with SAP* user.When you are login using sap* and deleting old license you will get a popup with this message <b>SAP* WHEN THE VALID SYSTEM LICENSES HAS EXPIRED,ONLY THE SAP* CAN LOG ON TO THE SYSTEM.IN THIS CASE,IT WOULD BE DANGEROUS TO LICENSE
THIS IS WHY THE SAP* IS NEVER ALLOWED TO DELETE A LICENSE</b>
So can cannot delete the expired license with SAP*.If u want to delete means try to login with <b>dilog user</b> and go to slicense T-code.
Select the expired license in menu goto EDIT->Delet license(shift+f2)
kiran kumar.v

Payment Engine for SAP 2007

Payment Engine for SAP 2007 does not produce the bank file as per normal. They are on Patch 35.
Quote from the client
"The new version requests to export the bank file to specific destination (the previous one needs two runs u2013 one for test, another for production).
After having clicked the Export button, thereu2019s no error message. And, thereu2019s no bank file been created into the destination folder."

Hi
please check user with Windows Admininstrator
rights is able to create the File or not.
If only user who owns Windows Admininstrator rights can create bank file but other normal user cannot create bank file
even though they have the full permissions to the B1i_SHR folder, for this problem,our developer is working on it and plan to fix it in 2007APL36.
Now the workaround is,
you have to make the user who login into client as windows
administrator.
Regards,
Eleven
SAP Business One Forums Team

License Error -2147221163

Hi,
I have new computer with Windows Vista. If I want select licence server, SAP B1 reports: License Error -2147221163 . From other client is all O.K. . Where is problem ?
Thank you very much for help.
Pavel

What version of SAP B1 you are using ? I am afraid it could be caused by vista not supported by SAP B1.
here is the explanation I obtained from B1platform:
Client platform:
Microsoft® Windows Vista
- 32 Bit
- Business & Enterprise Edition
2005 A SP01 Add-Ons 2005 SP01 2005 B 2007 A
X(1) X(1) X(1) X(2)
(1) The SAP formal internal processes that are required for the announcement of Vista support have not been completed yet. Hence, Vista support will be announced as soon as these processes are completed.
(2) Supported as of 2007 A PL03
Rgds,

SAP BPC 7.5 Installation Error

Hello All,
We got a requirement to install the SAP BPC 7.5 on top of fresh machines with SAP BI 7.02 for our customer. As a part of installation and configuration process i have downloaded the SAP BPC Patches and installed on top of BI 7.02 with enhancement pack 2. created a new apshell Apshell whcih is default. the server was included in a DOmain XX. I also craeted the Dot Net server with domain user and which was included in admin group successfuklly. i was able to see the dot server manager diagnoistic green and successful. Now the real confusion starts.
1. After installation of BPC DOT NET server on Windows 2003 server wich was already included in the domain now when i ca access the server http://localhost/osoft which is taking me to the screen sap bpc console and givig me a couple of options like
1.Interfact to word
2.interface to powerpoint
3. Interface to excel
4.Interface to web
5.Administration
when i click on administration it is taking me to second screen where it is askig me to select Appset in a small popup windows. There i dont have any popup to select where as it is leading to empty screen where there is no popup. when i click on ok then it will lead to again the main screen it have all the options interface to word,powerpoit etc..,
I am really confused where i am missing ad whether i need to do anything else more for the same.
I also see lot more in the installatio guide like select apshell.db9 etc where i am unable to see that option. i no where saw the file with name apset. I also saw in the some blogs and installation guide saying that to select the option install on top of mssql2005 where as i didnt see such an option anywhere.
Can any one guide me o this where and what i am really missing.
Edited by: Hemanth Kumar on Dec 25, 2010 5:18 PM

Hi,
This is one of the most common error I encountered during my recent BPC Project . This can be solved by the following ways.
1.Please check the authorizations ( make sure to have full admin authorizations for the Apshell) .
2.Make sure to Re- install both admin & client tools (check the Diagnostics and uninstall re-install both admin & client tools once.)
Regards
CSM Reddy

SAP GUI and Win 7 error when attaching a document

I searched Google multiple times for an answer but didn't find one, so I'd like to bring it up in this forum.
I start by saying that mine is a large corporation with centralized application, Windows and security configuration, so I have very little manuvering as far as changing settings.
The problem we run into is as follows:
some users who use a particular (Quality Assurance) module of SAP need to regularly attach documents (typically PDF format) in SAP. The typical size of an attachment is between 3-7 MB.
Those documents are store on a network file share remote to the site. The network latency between the site and the file share location is approx. 6ms (not huge by any means). Users are running Win 7 Enterprise SP1.
Randomly, the attachment download fails in SAP and they have to exit and log back in to SAP to resume. The attachment may fail2-3 times, and then succeed or fail permanently.
Copying the file to a local drive (C:) and then attaching it in SAP always works.
The users report that this was not an issue when they were using WinXP SP3 a few months back.
Again, the problem is random in that it cannot be recreated at will but happens often enough to be more than just an inconvenience.
the Windows event log logs the following message when the attach process fails and SAP freezes:
The program saplogon.exe version 7300.1.2.1080 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: a7c
Start Time: 01cf38c9a86d55ac
Termination Time: 16
Application Path: C:\Program Files\SAP\FrontEnd\SAPgui\saplogon.exe
Report Id: 139b5ba9-a4bd-11e3-8b65-d8d3857a05c5
I'd appreciate any input that would help resolve this issue.
Steve

Besides updating the patch level, the other thing you can try to get more information is turn on or increase the level of tracing within the SAPGUI. You can do this on the workstation in SAP Logon by clicking the little button at the upper left of the window title bar, then in the drop-down choose Options. In the new window that opens go to the Traces folder and have a look through the three different kinds of traces you can turn on. Probably you should turn on SAP Logon Traces to the "Errors" level, and same for SAP GUI Traces (to Level 1: Errors), and under Session Traces pick the options that make sense to you (perhaps "Access Control", "Office Integration", and/or "Security"? You might need to experiment with different options to get the right combination that doesn't overload the trace file with noise; you may not need a Session Trace at all if the error trace on the other two options reveal what's wrong).
You can see under Session Traces what folder the trace files will go to, and open the folder from there. By default it will be C:\Users\<username>\AppData\Local\SAP\SAP GUI\Traces.
Best regards,
Matt

SAP 2007 Patch 08 License error

Similar Messages

Maybe you are looking for