SAP Connectivity slow - Terminal Services

Dear ALL,
we have two Locations (A & B) & Main Server is placed at Location (A) and users from Location (B) connect through terminal Server (IBM Server) there are approximatly 6 users who connect at a time to terminal server, so what should be the RAM size of the Terminal Server.
As of now we have given 2GB RAM, But the performance is very Poor
Applications:
SAP 2007B & 4 ADD-ons
Thanks in Advance

Hi Pankaj,
Check the following link
Sizing a Terminal Services server for Business One
Re: SAP BUSINESS ONE IS SLOW
Re: Slow SAP connection
SAP Business One Best-Practice System Setup and Sizing
*Close the thread if issue solved.
Regards
Jambulingam.P

Similar Messages

Connecting to Terminal Services Web Access

Is there any way to connect to Terminal Services Web Access from a Mac that runs OSX v. 10.8.3?

Not that I know of, but you can connect to an RDP server using this:
CoRD: Remote Desktop for Mac OS X

Accessing SAP GUI via terminal services

In my current project, it is proposed that all SAP development be done remotely via terminal services login to host machine. Does anuone have experience of this way of working? If so what problems were encountered (performance / response times?) and was this method of development successful?

Paul,
We did this for a short while for off hours development work and had to quit, but the reasons may be specific to us. We are only doing ABAP development.
1. Support. Developers would be disconnected (for what ever reason) then when reconnect the terminal server would open another session, taking another key, and potentially loosing unsaved code.
2. Debugger. The new debugger, as of ECC, really lends itself to a wide display or two screens, we were very limited to what display options we had by the terminal server (again this might be specific to the way the TS was setup here, but you might want to check)
As I mentioned ours was for off hours support, so we setup the developers the ability to remote desktop to their desktops through VPN.
Good Luck.
- Brian.

Problem with Connection on Terminal Services

CR XI Pro VS 2005
I've got several reports in a .net application.
Connection data is initialised the usual way with a ConnectionInfo object.
On the client workstation a CRRedist2005_x86.msi is installed.
Everything is working fine.
But when I try to open a report while the application is running under Citrix nothing is happening for a long time - then a message box appears with textboxes for server, database, user and pwd. The first three are the correct entries from the conn-object, the pwd is empty.
When I try to enter the password, a MsgBox says: 'Authentification Error. Try again.'
I hope someone can help me out.

Hi Amit,
thanks for your reply.
I did install the SQLNativeClient on the server but nothing really changed. Afterwards I did deinstall the Redist-Utility AND my application and installed both of them new.
And now it works.
I really wonder why and what has been wrong before.
Regards
Hans-Christian

Microsoft SQL 2005, Terminal Services and Tiger

We found a great application we need to use at work. Unfortunately, it runs only on Windows. We will need to run it on a Windows server, running SQL Server 2005, and Macs interacting with it using MS Terminal Server. At least that is what someone at Dell said. This ends up being a huge and complicated purchase for us.
All this is totally foreign to me. I set up our Mac network, using OSX Server 10.2, migrating up to 10.4. We have 16 computers on the network, and it runs reasonably well. I did not need months of training to set it up. There are many things I do not understand and features that I have zero idea about...but for email, web, ftp and application serving, it works well.
We have 13 Macs, 2 Windows boxes and one UNIX box on the network.
Has anyone used SQL 2005? Has anyone had to connect thru Terminal Services to a Windows Server?

Hi John!
Using Terminal Services on a Windows server is common in corporate environments and solves a lot of issues where Macs can't run Windows-only software.
Since the Windows server will be the only Windows machine on your network and you only need it for a specialized purpose, you can probably get by with purchasing Windows Small Business Server Premium, which comes with a SQL Server. You'll have to ask the vendor if this version will work with their product. See this link on Microsoft's website http://www.microsoft.com/windowsserver2003/sbs/default.mspx.
Many third party database applications will facilitate the setup of the datbase with the SQL server, but they won't support the SQL software and its security. I'd advise hiring a contractor to help with the installation and setting up a backup (preferably someone that can become familiar with your environment and provide ongoing support).
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.3)

Running LabVIEW 7.1 on Windows 2003 Server with Terminal Services

We are setting up a newtork based solution with LabView. I have looked for documentation on installing LV 7.1 on a Windows 2003 server to run the applications and then have destkops connect to it. Can this be done with a Terminal Services Access solution? Another words, if we were to purchase the LV Volume License Manager, can you install LV 7.1 onto a Windows 2003 server and run the application through TS across a 1GB backbone from the desktop, which makes the server do all the processing?

On Fri, 29 Oct 2004 07:42:13 -0500, ITIQ wrote:
> By running a session through Terminal Services you are NOT running
> anything on the desktop it all runs on the server. So if the software
> was installed on the server and you had the correct number of licenses
> that you allow to connect through Terminal Services, would this not be
> allowed under the EULA?
Sorry for the delay. I'm surprised Philip didn't get back to us... Phil
are you there? Based on his comments, I think he misunderstands your
situation (no offense Phil).
You and I are both talking about the same thing. You basically want a
terminal server license. NI will not provide it. They told me (over the
phone) to get a multi-seat license (MSL). IMO, that's unacceptable. I
expect a LV license taylored specifically for thin client networks. A
multi-seat license is for -->installing<-- on multiple machines. It
conforms to a totally different set of rules. One big one, an MSL assumes
that you intend to run LV locally to interact with DAQ hardware. Since
this won't be done with the thin client, you shouldn't have to pay for it.
> I am not sure if the question is if the license is valid or not, I am
> first just trying to figure out if you can even install LV on a Windows
> 2003 server and run it through a Terminal Services Session.
Since you are talking about a Microsoft operating system, I would say this
cannot be done without some additional/costly junk installed.
Here's another option. If the people you're supporting don't have any
platform dependent things like ActiveX in their LV applications, you
should consider using a Linux-based terminal server. I know for a fact it
works.
I've assisted in setting up a network like this before:
* One Linux terminal server with LabVIEW for Linux (Full Dev)
* One WinXP box on the network with LabVIEW for Win (Prof Dev)
* 5 cheap thin clients
They developed LabVIEW source code on the thin clients and then compiled
packages on the WinXP box for distribution to their customers. The WinXP
was only used for compiles so they just hopped on when necessary. The
eventual plan is for the thin clients to simply open a RemoteDesktop
(using RDP) terminal session and do the compiles from there. I'm not sure
how to do that yet... on the Windows side.
> I see the comments on calling VIs through LV. I am a Network Engineer
> not a LV Developer, so unfortunately I do not know what a VI is. All I
> am looking to do is run low end PCs with LV if I have to, but use the
> server as the workhorse to process all sims etc.
Phil must have thought you needed a LV application to access the front
panel controls of another LV application running on a remote machine. The
VI server is handy in that area but useless in your case.
Hey, you wanna hear about cheap network infrastructure? We bought our
thin client boxes for $15 each! Go to ltsp.org if you want more info on
configuring Linux as a terminal server.
You, and anyone else, can also email me at gnu_voodoo [at] netzero [dot]
com for questions/comments.

SAP clients on a terminal services

How do you setup SAP clients on a terminal services? I want to deploy SAP 2007A (5 licenses) on a windows 2008 server running terminal services.

Your question is not very clear. If I understand you correctly, you just need to install B1 client on the Terminal Server to connect to B1 database.
Thanks,
Gordon

Web-dynpro application -ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)

i have created my web-dynpro application in development. and sent to quality . whenever i will execute my dynpro in quality i got one message
ERROR: ICF service node "/sap/bc/webdynpro/sap/zqm_cto_arr_general1" does not exist (see SAP Note 1109215) (termination: ERROR_MESSAGE_STATE)
whenever i saw sicf transaction my web-dynpro is not seen . my dynpro application name is more then 15 character. what i will do . please give me valuable suggestion.....

Hi Ashok,
for your requirement the application is not exist in particular place. It means, the webdynpro application is saved at different package or different location.
Please change the webdynpro component name and save it in particular request in package, then transport it to quality ..(development server )
then go to SICF t.code .. sap->bc->webdynpro->sap->find out your application and activate the service of your webdynpro application.
Now test it ... this solution might helpful to you .
Regards,
Naveen M

Viewing "This PC" Devices and Drives when connected through a Terminal Services connection

Greetings, [long-time listener, first time caller]
I am a service technician who remotely logs into customer servers using terminal services. I am accessing systems around the globe. I regularly need to move files from my local system to the customer system, so I always connect with my local
(client) drives.
A feature of Windows Server 2012 R2 drives me insane. I use the good old "[Windows] + e" Shortcut to bring up the file explorer. It displays "This PC". It displays both the server's local volumes and \\tsclient\
volumes by name and also waits to display the information until it can get volume information from the terminal service drives.
The end result is that:
1) The Devices and Drives display is delayed by 5 to 10 seconds while it gets volume data for the network drives and
2) The drives I care about, the customer's local drives, are displayed AFTER the The Terminal Services drives AND Server-side removable storage.
Am I missing a way to display the networked devices separately? This is extremely annoying. It wastes my time and displays items illogically.
I know there are third party apps that can help (OldNewExplorer). But they are not an option for me.
[Modified on 2014.11.07] I have attached a screenshot of the way it looks in Windows Server 2012.
Thank you

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that local drive redirection is not working. For this please check whether drive redirection is enabled on server side and whether any group policy is not set to disallow the client drive redirection. Check on domain controller
that the 'Default Domain policy" - 'Do not allow drive redirection' was disabled.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Excel add-in Terminal Service, not connection is made

I have a problem with Excel add-in on Terminal Service. Theinstallation went all right and the add-in is found by Excel. Theproblem is when I try to connect to one of the essbase serversnothing happens. When I check the server no login attempt has beenmade, the funny thing is that when I enter a server name that doesnot exist I get an error message telling me that the servercouldn’t be found (so clearly the add-in is doing something).The versions that I’m using for the add-in is 7.1.5 andI’m trying to connect to a servers with the essbase versions7.1.5 and 7.1.2. I have installed this add-in on several desktopsand then it’s working as expected. Is this a known problem? Have anyone had this problem before? Iwould really appreciate any help I can get regarding thismatter. I should probably also tell you that I had an older version ofExcel add-in installed and working before, the version was 7.1.2.This was uninstalled before the 7.1.5 version was installed. ThanksFredrik Arbin

This sounds liek an issue we have seen a number of times. When you first connect you will need write access to the essbase\ folder on the machine where Essbase add-in is installed. It writes the connection information provided to essbase.ini and this is then used the next time you log in. You should be able to narrow the write area down further, can't remember exactly where the write is required - there are other areas as well from memory. Hope this helps Andy King www.analitica.co.uk

WEBVPN and Terminal Services Web Connection

Does ASA WEBVPN support MS Terminal Services Web Connection?? I can reach the first login page but can not go further. I click the "connect" button no any response?!! All other web service running well through webvpn, only MS Terminal Services Web Connection.
I noticed when I use my local PC to connect web ternimal server, it first use port 80 and then use port 3389. I tried portforwading
port-forward TSSERVER www 10.1.1.1 3389
port-forward TSSERVER 3389 10.1.1.1 3389
still not works, please advise.
my ASA version:
Cisco Adaptive Security Appliance Software Version 7.2(1)
Device Manager Version 5.2(1)
Thanks.

This is the kind of thing that you need a sniffer trace on both sides of the CSS to determine what the problem is.

HTTP and terminal services connection intermittently for CSS 11506

I am configuring a client/server CSS configuration. I am facing an intermittent of http connection. The browser will require to refresh 3 times before the web page is seen. I am also facing the connection to the real server behind the CSS using the terminal services in Windows server 2003. I am using ML330 to connect to the real server through their VIP address. The connection is sometime successful but most of the time is not. I had attach the network diagram and the config for reference. Please advice!

This is the kind of thing that you need a sniffer trace on both sides of the CSS to determine what the problem is.

OfficeJet 8000 not showing up in terminal services connections

I have recently been struggling with officejet 8000 creation/deletion on 2k3 terminal services. Looking through the event log, it shows that these printers are created, and then immediately deleted... I was able to map one of the printers to the server, but that's because it's on a local network. The remote users won't have that capability. The machines in question are windows 7.
Thanks

You would actually reset your password from the recovery partition. Reboot using cmd-R, go to the Terminal in the Utilities menu, type resetpassword and proceed.
Matt

From citrix remote connection, cannot launch terminal Services. Can only receive download 'launch.ica'.

Terminal Services would launch prior to installing Firefox on my PC

(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
This is a start.
post the output of
/var/log/messages

Accessing client using Windows 2008 Terminal Service - Web Access?

Dear experts,
We are developing a network infrastructure solution for our new customer's B1 8.8 implementation.
Our customer would like to utilize Windows Server 2008 Terminal Service to connect B1 client in remote branch with server in head office area. And they want to use Terminal Service - WEB ACCESS. Base on our experience, we successfully implement B1 using Remote Desktop Connection or Citrix to support B1 client in the remote area.
My question is, Has SAP already support to utilize windows "Terminal Service - Web Access" to access B1 client?
If Yes then what are possible issues and solutions?
Thanks,
Indra

Hi,
when we said to customer that it is better to use citrix, they will see some concerns as follows:
1. Investment to buy citrix server
2. License of citrix
3. installation time for ICA client
4. maintenance cost for citrix and its server
The benefits are as follows:
1. Reduce cost to purchase B1 license. Remote and LAN users can access B1 through citrix
2. The connection speed. Citrix is more faster than RDC or terminal services either web access or not
3. The security reason. Check this link:
http://www.virtualizationadmin.com/articles-tutorials/terminal-services/management-tools/terminal-services-internet-information-server.html
In the support platform, there is no windows terminal services web access info. You may check it here:
http://service.sap.com/smb/sbo/platforms
The supported hosted environments are using citrix or windows terminal service. For remote users, the citrix is used for web access and windows terminal services are using IP and the connection is using internet (do not use VPN).
The citrix is not very expensive. We must make them realize the benefit.
Kita harus pastikan citrix itu bagus dan tidak mahal2 amat kok. Beli dari reseller citrix yang diauthorized tetapi tidak big company agar tidak mahal sekali. SAP AG menyarankan menggunakan citrix karena memang sangat bagus.
(in english : we must convince the customer about the citrixs benefit. it is not too expensive. The citrix could be buy from small reseller company so that its price is acceptable. SAP AG suggested to use citrix because it is very best web access).
I know bhs because I am from Indonesia hehehe....
JimM

SAP Connectivity slow - Terminal Services

Similar Messages

Maybe you are looking for