SAP ECC 6.0 with DB2 on winds 2008r2 using VMware

Dear All,
Request you to guide me in giving some information related to
-compatibility
-best practice
-official guidelines for SAP installation.
We have purchased SAP ECC 6.0 with DB2 as RDBMS.
Thanks in advance.
by
Harika N

I got information
Note 1130801 - DB2 LUW, DB2 z/OS release for VMware, XEN, and Hyper-V
The usage of DB2 Version 9.1 for LUW, DB2 Version 9.5 for LUW, and DB2 9.7 for LUW on Windows and Linux (SUSE and RedHat) with VMWare, KVM, and XEN is permitted and supported by SAP and IBM.
Kind regards,
Harika N

Similar Messages

  • File system for SAP Ecc 6.0 with db2 on AIX

    Hello Everyone
    Pleaese suggest the file system size which is to created before installation of sap ecc6.0 sr3 on Aix with DB2.
    Thanks

    find this
    PRD
    df -M
    Filesystem    Mounted on         512-blocks      Free %Used    Iused %Iused
    /dev/hd4      /                     4194304   2008384   53%     2438     2%
    /dev/hd2      /usr                 33554432  24364192   28%    48662     2%
    /dev/hd9var   /var                  8388608   7880328    7%      580     1%
    /dev/hd3      /tmp                  8388608   8342704    1%      123     1%
    /dev/fwdump   /var/adm/ras/platform     262144    261448    1%        4     1%
    /dev/hd1      /home                 2097152   1928856    9%      131     1%
    /proc         /proc                       -         -    -         -     -
    /dev/hd10opt  /opt                  4194304   2851592   33%     6285     2%
    /dev/fslv12   /instcd1             41943040   9293200   78%    15850     2%
    /dev/fslv00   /sapmnt/P11          10485760   8752544   17%     5955     1%
    /dev/fslv01   /usr/sap/P11         10485760   8244400   22%     1319     1%
    /dev/fslv02   /db2/db2p11           4194304   3100248   27%     3941     2%
    /dev/fslv03   /db2/P11/log_dir     20971520  18346264   13%       26     1%
    /dev/fslv04   /db2/P11/log_dir2    20971520  18346424   13%       26     1%
    /dev/fslv05   /db2/P11/db2dump      4194304   3422024   19%       23     1%
    /dev/fslv06   /db2/P11/sapdata1   272629760 220914312   19%      106     1%
    /dev/fslv07   /db2/P11/sapdata2   272629760 220914000   19%      106     1%
    /dev/fslv08   /db2/P11/sapdata3   272629760 220914304   19%      106     1%
    /dev/fslv09   /db2/P11/sapdata4   272629760 220914280   19%      106     1%
    /dev/fslv10   /db2/P11/saptemp1    10485760  10483352    1%       47     1%
    /dev/fslv11   /db2/P11/mirrlog     20971520  20967456    1%        7     1%
    /dev/fslv13   /db2/P11/archlog     94371840  46774984   51%      380     1%
    /dev/fslv14   /sap/auditlog        12582912  12311392    3%       51     1%
    *****rpd11:/usr/sap/trans /usr/sap/trans       33554432  11883968   65%     5738

  • Integrating SAP ECC 6.0 with Microsoft Windows 2003 Active Directory

    Hi Gurus,
    We are planning to integrate our SAP ECC 6.0 with Microsoft Windows 2003 Active directory.
    I have several questions on this:
    1. Can i authenticate all the users from SAP
    2. It is used only for user authentication or can it be also used for password authentication
        ie user can login using his windows password?
    3. While integration in SAP does a separate table or a field is created in database.
    4.If a employee leaves a company than in SAP is it possible to lock & deactivate the user automatically.
    Thanks in advance.
    Regards,
    Nihar

    Hi Mastek,
    You should be able to accomodate your needs with respect to integration of your AD accounts with SAP ECC ABAP. This can be done via LDAP connector configuration. The below has info on how to perfrom the configuration at a high level. You will have to integrate, and map certain user data. You may also want to do some LDAP Connector research:
    [http://help.sap.com/saphelp_nw70/helpdata/en/10/1a063a15c611d4b61f0000e835363f/content.htm]
    On the Java stack - you can also confugure UME to integrate/authenticate with AD:
    [http://help.sap.com/saphelp_nw70ehp2/helpdata/en/12/7678123c96814bada2c8632d825443/content.htm]
    Hope this helps!

  • I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

    I've just moved from PC to Mac, with my PC i and using Vmware Player I used to work on 2 Virtual M/C both on 2 external drives, one Windows Server 2000 as operating system and the sec. WindowsXP, is their a way to open these m/c on my mac

    I am so glad to hear about your success. As you are new to the Mac environment, I will be glad to help you more.
    You said: "I can't change the setup yet but i have access". I don't understand what you mean about changing the setup! Please let me know more about that.
    I also recommend to use Boot Camp, which allows you to install windows on a partition of your internal hard drive. This has many benefits. First, you can restart your computer and start up in windows. This makes your Mac device a complete windows machine and you gain the most from your hardware when working in Windows. Second, if a problem occures to your Mac OS X, you can restart your machine in Windows and prevent your data from getting lost. Third, you can import the Windows installed on the boot camp partition in to the Mac OS X using VMWare Fusion and work with it as a virtual machine. In this situation, VMWare enables you to work directly with your Windows in the boot camp partition. So it does not create a file package for the virtual machine in OS X.
    Regarding the data safety and reliablity, I strongly recommend using Time Machine. You can also set it up to back up your virtual machines or not. This is possible to set up in the Virtual Machine Preferences Page in VMWare Fusion, or in the Time Machine preferences page in the System Preferences app of OS X.
    Please don't hesitate to ask any other question. I will be glad to help you.

  • Upgrade from SAP R/3 4.7 to SAP ECC 6.0 with PSCD and TFA

    Hello!
    I have to upgrade an SAP R/3 4.7 to SAP ECC 6.0.
    We have SAP FI/CO, PSM, IM, FI-AA, PS, with PSCD (FI-CA) as well the special taxes component TFA.
    Is there some special procedures for the the Upgrade with this components (PSCD and TFA)?
    Is there some documentation for the special Uograde procedure as well the normal procedure?
    We use Windows with Oracle.
    Can some one

    PSCD is in ERP a Business function set - see 957295 - PSCD: Renaming PUBLIC_SERVICES business function set, the upgrade should automatically take care that activation.
    Is TFA the tax extension for Ireland? If yes, then the same should be true here.
    Markus

  • Integration of SAP ECC 6.0 with SAP Environmental Compliance 3.0

    Hi Friends,
      We have SAP ECC 6.0 running on Sun Solaris with Oracle as the DB. Now we are in the process of installing SAP Environmental Compliance Version 3.0  which is running in Windows 2008 Server and with SQL Server 2008 as its database.
         I'm looking for an answer on how to integrate the SAP ECC 6.0 to SAP EC(Environmental Compliance) system.
    Kindly provide your valuable inputs.Looking forward to hear from you soon.
    Thanks and Regards,
    Vimal

    Hello Vimal
    regarding this software a number of publications are available:
    http://help.sap.com/saphelp_ec30/EC300_FuncDocu_EN.pdf
    Here you will find the list of rerequisites etc. and  the integration e.g. into SAP EHS Management is explained.
    In any case. The SAP marketplace is the right place to take a look regarding  prerequisites and how to integrate this software with SAP core (SAP ECC 6.0) or with SAP EHS Management software.
    As SAP EHS Management is technically part of ECC 6.0 the link to SAP Enviromental Compliance should be possible.
    With best regards
    C.B.

  • Upgrade SAP ECC 6.0 with SPS 12 to EHP4

    Hi!
    I would like to update a SAP ECC 6.0 system with EHP4. 
    I am on Windows 64 Bit with Oracle.
    My current SP stack of SAP ECC 6.0 is 12.
    The questions are:
    Does the SPS 12 of SAP ECC 6.0 fullfil the requirements for the SAP EHP4-Upgrade?
    If not what is the strategy to upgrade SAP ECC 6.0 system with SPS 12 to EHP4?
    Any helpful information will be very appreciated!
    Thank you!

    Hi
    You can check the below notes
    Note 1143022 and 1134872 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
    Regards
    Uday

  • Help needed applying OSS note 981295 in SAP ECC 5.0 with SAP Kernel 640_REL

    Hi Experts,
    Our functional team is trying to implement a kind of workflow through a notification via SAP Inbox (transaction code SBWP) after the release of a Purchase Order (Transaction code ME29), this is every time when a purchase order is released through transaction code ME29, a notification will be sent to the SAP Inbox (transaction code SBWP). So according to this they told me to implement OSS note 981295, but using transaction SNOTE I get the message that this note can't be implemented in my system this because my SAP Kernel version is the release 6.40 and the needed SAP Kernel for this note is from version 7.00 to version 7.10. So what do you recommend please in this case in order to implement the required functionality on our SAP ECC 5.0 System?
    Best Regards,
    Erik Espinosa

    Note clearly states
    This note is only relevant if the following Support Package is installed in the system:
    NW04s: Support Package SAPKB70008
    Meaning is not relevat to your case. You need to keep looking... if you open an OSS message people from SAP might put you in the right direction.
    Regards
    Juan

  • SAP ECC 6.0 with Classic GL

    Hi all, after doing an upgrade from 4.6C to ECC 6.0 is it possible to continue using classic GL no activating new GL?. Is it necessary any data conversion in GL ?.
    Thanks
    Regards
    Hernan

    Hi,
    New GL has lots of functionality unlike Classic one.
    Activation of new GL during upgrate will be a big project considering complexity involved during migration and introduction of new functionality. It'll be as good as implementation.
    As long as it's just a technical upgrade, you don't have to worry about much for new GL for the time being. Ofcourse, you'll have to migrate to a new GL at some point of time.
    Thanks,
    Nirav

  • What is the difference with 1 Lync Standard Edition using VMware Fault Tolerant and 2 Lync Enterprise Edition in a cluster

    Hi
    As I will be planning to setup Lync on a virtual environment regardless if it is going to be the Standard or Enterprise edition.
    I am thinking if we use 1 Lync Standard Edition for the FE Server with Fault Tolerance enabled, would it be as good as having 2 Lync Enterprise Edition in a cluster?
    Thanks

    Hi there,
    the main difference between using Lync enterprise and lync standard is the High availability and scalability feature,
    you will get fault tolrance setup with one lync standard edition running on whatever hyper-v and vmware platform, however this will not be an optimum highly available solution for the simple reason that upon a host server failure the image will move
    to another available host server and users will lose their active session durin the move process.
    on the other hand what you will gain if you the Enterprise edition is that you will have a unique identity to which all lync clients will be connecting and this identity is the lync pool identity which is in the background handled with multiple Front-End
    servers and AV conferencing pools, mediation pools and so on.
    In additioin when you have multiple front-ends in place, those front-ends will not work in active/passive mode as in a regular cluster, in contrairy all the servers will be active and handeling the work load.
    hope i make it a bit clear, if yiu need more info i am ready
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread
    Thanks for the response, being a small environment of 300 users, standard edition would be more than enough for me but the fact for HA is very critical for me at this stage. That is why I am exploring the option of using VMware FT.
    I don't quick get what you mean on the users having to move to another image as my understanding of FT is in the event of a host failure (not VM failure like bluescreen etc), the VM will fail over to another host with no lost in any ping etc.
    So, in theory, the Lync Server VM would never know that the parent ESX host had failed and it needed to failover to another host. Hope my understanding is correct.
    Thanks

  • Smartform Printing Problem in SAP ECC 6.0 with Ehp6

    Hi Sap Expert,
    Our Sap System has been upgraded from ECC 6.0 to ECC 6.6 ( Ehp6). now we are  facing  problem in to print smart forms .
    I have a smart form with one page and three copies are there.
    On first it was written ORIGINAL, on second DUPLICATE and third one is TRIPLICATE.
    When I see the print preview it shows all the three pages ( ORIGINAL,  DUPLICATE and  TRIPLICATE. ). but when i give the command to print.  it will only 3 copies
    ORIGINAL. and when i convert into PDF it shows only one page ORIGINAL.
    I want ORIGINAL,  DUPLICATE and  TRIPLICATE printout in single command.
    Note : Before Up gradation of sap system it worked fine.
    Guide me.........

    Hi Marques,
    Yes, my problem has solved,
    Write the code Driver Program:
    Declare Internal Table as:
    DATA : BEGIN OF ITAB OCCURS 0,
              I TYPE I,
              TEXT TYPE CHAR20,
              END OF ITAB.
    and Append 3 time this Itab with the no of copies of form ( Original, Duplicate and Triplicate ) as
        ITAB-I = 1.
       ITAB-TEXT = 'Original'.
       APPEND ITAB.
       CLEAR ITAB.
    Now,
    LOOP AT ITAB.
    call function module of smartforms as
    CALL FUNCTION fm_name
       EXPORTING
        CONTROL_PARAMETERS         = CO
        OUTPUT_OPTIONS             = OT
    *   USER_SETTINGS              = 'X'
         L_***                      =  L_***
         V_INDX                     = ITAB-I
    * IMPORTING
       TABLES
         IT                         = IT
    and modify the smart form as
    write the code in window
    IF V_INDX = '1'.
    v_text = 'Original'.
    ELSEIF V_INDX = '2'.
    v_text = 'Duplicate'.
    ELSEIF V_INDX = '3'.
    v_text = 'Triplicate'.
    ENDIF.

  • Does /sapmnt need in cluster file system(SAP ECC 6.0 with oracle RAC)

    We are going to be installing SAP with Oracle 10.2.0.4 RAC on Linux SuSE 10 and OCFS2. The Oracle RAC documentation states:
    You must store the following components in the cluster file system when you use RAC
    in the SAP environment:
    - Oracle Clusterware (CRS) Home
    - Oracle RDBMS Home
    - SAP Home (also /sapmnt)
    - Voting Disks
    - OCR
    - Database
    What I want to ask is if I really need put SAP Home(also /sapmnt) on cluster file system? I will build a two nodes oracel 10g RAC and I also have another two nodes to install SAP CI and DI. My orginial think is sapmnt is a NFS share, and mount to all four nodes(RAC node and CI/DI), and all oracle stuff was on OCFS2(only two rac nodes are OCFS), anybody can tell me if SAP Home(also /sapmnt) can be NFS mount not OCFS2, thanks.
    Best regards,
    Peter

    Hi Peter,
    I don't think you need to keep /sapmnt in  ocfs2 . Reason any file system  need  to be in cluster is,in RAC environment, data stored in the cache of one Oracle instance to be accessed by any other instance by transferring it across the private network  and preserves data integrity and cache coherency by transmitting locking and other synchronization information across cluster nodes.
    AS this applies to redo files, datafiles and control files only ,  you should be fine with nfs mount of /sapmnt sharing across and not having ocfs2.
    -SV

  • File system for SAP ECC, EP , BI and CRM installation on Solaris/DB2

    Hello,
    We are going to implement SAP ECC 6.0 with EP 7, BI and CRM on Solaris operating system with IBM DB2 database.
    All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    If anyone able to help me with required Solaris file system. it will be great help.
    Please let me know if there is any query.
    Thanks.

    > All these applications are going to be installed on single server, as being a basis person, I know this is not all recommended.
    > But due to client's requirement and keeping cost factor in mind I need to install all these application on single box.
    Why not using Solaris zones/container? This decreases the administrative amount tremendeously since you will deal as with "single machines" but they all run together on one box.
    > Now here I need your help. as I basis person, I know the required Solaris file system for SAP ECC 6.0 but not having any Idea about other application like EP/ CRM and BI .
    So you'd need to read the installation guides
    Markus

  • How SAP ECC interface with SAP SRM

    Hi all,
    I need to know how SAP ECC System interface with SAP SRM in management of Catalogs and Contracts: how can I upload, for example, Catalogs which are on SAP ECC to SAP SRM?
    Thanks, best regards,
    Maria

    Dear Maria Bonomo,
    I have gone thorugh the following link and it seems to answer your query: 
    www.sceis.sc.gov/content/dnld/agydir-1B.pps
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • Upgrade of Sourcesystem SAP EHP3 SAP ECC 6.0 to SAP EHP4 SAP ECC 6.0

    Hi,
    I noticed there is a lot of questions on the testing procedures for BI side when Upgrading the source system from R/3 to ECC 6.0. But noticed there aren't many posts on when doing Ehancement Packs. But I believe the process would be more or less the same?
    My project is doing an Upgrade of SAP EHP3 SAP ECC 6.0 Stack03 to SAP EHP4 SAP ECC 6.0 Stack07. BI Side is also upgraded, but I am more interested in the impact of the Upgrade's Source System (ECC) on BI.
    I believe the amount of impact is less as compared to an upgrade from R/3 to ECC, but there still should be impact to BI somehow.
    Basically, from what I have researched, there correct procedure is as below:
    Pre-Upgrade
    1 - Lock users in ECC
    2 - ensure that the Delta queue is cleared in RSA7
    3 - check the PI in ECC6.0 ( What is PI???)
    3 - stop all loads from BW
    Post-upgrade
    1 - Check Source System connections
    2 - replicate all data sources in ECC (when I do a check connection in RSA1 I get the message "No metadata upload since upgrade" which I believe is due to this step not done yet? Is it ok to replicate all datasources??)
    3 - activate all rules thru program (RS_TRANSTRU_ACTIVATE_ALL. Is it ok to activate all transfer strucs?)
    4 - run Init w/o Data Transfer for deltas
    5- run and then check extraction for full & delta loads
    Appreciate if I could your expert inputs on the procedures above? Maybe a more detailed step by step procedure or comments are most welcomed.
    Thanks.

    Additional information:
    I start the upgrade from SAP ECC 6.0 with a dual stack.
    SAP advised me to download the following file to start the upgrade
    SAPehpi_68-10005800.SAR from the SMP
    Download path: Browse our Download Catalog-->  Additional Components --> Upgrade tools --> SAP EHPI Installer --> SAP EHP Installer 7.00.
    Start the upgrade without the jce_policy_zip extension. This was written in note 1302772 .
    Have more luck with it.

Maybe you are looking for