SAP NWBC Scripting with LoadRunner

Hi All,
I want to script SAP NWBC application with LoadRunner for load test. We have SAPGUI and SAP Web Protocol in Loadrunner.
I am not able to get exact protocol for recording.
How can i do the load test for NWBC Applications (through loadrunner)?.
Thanks and Regards,
Chinnadurai R

I wrote those lines and they works
SapGuiAuto = GetObject("SAPGUI")
application = SapGuiAuto.GetScriptingEngine
connection = application.OpenConnection(<<System Name String>>, True, False)
session= connection.Children.Item(0)

Similar Messages

NWBC Side Panel and SAP GUI Scripting

Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Some of our users are getting pop up messages that say "The scripting support is not installed"... interestingly they don't actually appear to be opening a side panel when they get this message.
I noticed that these users don't actually have SAP GUI scripting installed at all, so not that it is just not enabled, it is not installed in these cases. So does the above section from the help documentation mean that SAP GUI scripting must be installed on the client PC but it does not actually have to be enabled?
That's how I am currently reading it... but perhaps someone can clarify for me, or someone else has had a similar experience.
Thanks,
Simon

Hi Simon,
As written in the documentation you quoted:
Simon Kemp wrote:
Hi,
I was hoping someone might be able to clarify the SAP GUI scripting requirements for using the NWBC side panels. In the help documentation it states:
As of NWBC 3.5 patch level 6 or NWBC 4.0 and SAP GUI 7.20 patch level 13 or 7.30 final release, it is no longer necessary to enable SAP GUI Scripting on the client PC, except if you are using Property Collector. That means, it is no longer necessary to enable front-end scripting through registry key (HKLM and HKCU) for using side panels in NWBC. However, it is still necessary to install SAP GUI Scripting and to enable it for the server (at least read-only).
Meaning: SAP GUI Scripting need to be installed on the client PC, although it is not required to activate it:
Regards,
Claudia

Scripting with windows 8 or seven

Hello everybody
I use scripting to update data in SAP. the script open a txt.file and automatise some actions.
The scripting works fine with windows XP but on other computer in windows 8 or seven the script don't find the file. message : file not found.
I have update the sap gui 7.30 to package 10 but we had the same problem even if we execute SAP in administrator side.
Someone have an idea ?
Best reagrds
Bruno

Thank you for you answer. i 'm not aware in VBA script language. perhaps could you correct my script ?
If Not IsObject(application) Then
Set SapGuiAuto = GetObject("SAPGUI")
Set application = SapGuiAuto.GetScriptingEngine
End If
If Not IsObject(connection) Then
Set connection = application.Children(0)
End If
If Not IsObject(session) Then
Set session = connection.Children(0)
End If
If IsObject(WScript) Then
WScript.ConnectObject session, "on"
WScript.ConnectObject application, "on"
End If
session.findById("wnd[0]").maximize
dim ds()
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objFile = objFSO.OpenTextFile("todo.txt", 1)
Set objFilelog = objFSO.OpenTextFile("log.txt", 8, true)
objFilelog.WriteLine("-----------------------------------------------------")
objFilelog.WriteLine("--------Start: " & now & "-------------------")
objFilelog.WriteLine("-----------------------------------------------------")
i = "0"
Do Until objFile.AtEndOfStream
strInputline = objFile.readLine
if len(strInputline) > 0 then
Redim Preserve ds(i)
ds(i) = strInputline
i = i + 1
end if
Loop
for each datensatzausdatei in ds
'--- begin to putin your recoded source code here　
session.findById("wnd[0]").maximize
session.findById("wnd[0]/usr/ctxtLAGP-LGPLA").text = datensatzausdatei
session.findById("wnd[0]/usr/ctxtLAGP-LGPLA").caretPosition = 6
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/mbar/menu[0]/menu[5]").select
session.findById("wnd[1]/usr/btnSPOP-OPTION1").press
'-- end of putin from your recode source code here
next
objFilelog.WriteLine("-----------------------------------------------------")
objFilelog.WriteLine("--------Ende: " & now & "--------------------")
objFilelog.WriteLine("-----------------------------------------------------")
Msgbox("Fertig /end")

Recording NWBC scripts for End User Experience

Hi Experts,
I am recording NWBC scripts using the Netweaver Business Client GUI for loading and running it through Robots for End User Experience Monitoring. I don't see an option to "LogOff" in NWBC client while recording the script. We only have option to "Close all session and LogOff" in NWBC client .
When I am using this option, it closes all the sessions including the EEM Recorder also without saving the recording .
I need to include "LogOff" as the last step so that it doesn't leave any active sessions for each run by different robots.
I have a Solution Manager 7.1 SP10 and NWBC client 3.5 Patch 13.
Please help me achieve this.
Regards,
Manish K

Hi,
for a browser the recommendation is to open a new, empty tab to keep the browser alive while closing the tab with the session. All that with the hope that the backend will use the triggered event of collapsing tab to close session.
Maybe a similar strategy works for NWBC.. but I don't know the UI in detail.

SAP GUI Scripting: Script Is Running.....Help!

Hello all,
I'm new to the forums and have an SAP question problem. I'm an end user of SAP and have been using it since 2002. A couple of weeks ago when I logged into SAP I noticed a red/white icon in the lower right corner of my screen. When I hover over it it says "SAP GUI Scripting: Script Is Running". The problem is, I have never created a script. When I start working in SAP I have noticed a lot of the screens have a different format now and I get a lot of ABAP errors.
After doing some research I found under "Customize Local Layout", "Options" I can uncheck the box "Enable Scripting". I click "Apply" and "OK". Now the red/white icon goes away in the lower right corner and all my screens go back to normal with no ABAP errors.
The problem now is that every minute or two I get a pop up window that says "Scripting support is disabled by the user".
Has anyone else had this problem?
1. I've never created a script. Why is one running now?
2. Is there a way to stop the pop up message "Scripting support is disabled...." if I uncheck "Enable Scripting"?
Thanks for any feedback

Here's the properties of the connection....
http://www.lstwo.com/images/97735141499811194923.jpg
http://www.lstwo.com/images/27092678568585605702.jpg
http://www.lstwo.com/images/02572789823840845106.jpg
Here's the properties of the desktop icon....
http://www.lstwo.com/images/36703668322706084468.jpg
http://www.lstwo.com/images/40729387005252851113.jpg
http://www.lstwo.com/images/48149337890555671928.jpg
I agree, I'm stumped. I even tried looking through the SAP entries in my registry to see if I could find anything. It's a bit confusing but I didn't see anything out of place.

SAP Standard Scripts ( how to Modify Standard Scripts)

hi every one , This is Abdul Rahman , i want to know how i should modify Standard SAP Scripts like RVORDER01 or MEDRUCK SCRIPTS ,i want to know whole process . and how to Run the Script . plz any kindly send some good DOC or web pages which i can acess
thankyou
Abdul Rahman

Hi,
Modifying SAP Forms
If you want to modify SAP forms, set up your development environment as follows:
Make sure that no SAP-standard forms are stored as client-specific copies in your development client.
Such forms should be held only in client 000, the SAP development and installation client. If you access an SAP-standard form from another client, then the central copy in client 000 is used.
If you need to remove SAP-standard objects from your development client, see Notes 10388 and 3355 in the SAP Online Service System (OSS). These notes explain the procedure for saving modified forms and then deleting all forms.
To modify SAP standard forms,
Copy the forms you need from client 000 to your development client.
Rename the forms using a name from the customer name reserve (names starting with Y or Z).
Copy the forms to one of your own Y or Z development classes.
Renaming the SAP standard object makes it possible to manage and transport your changes with the SAP workbench organizer. The organizer is not activated for SAP-standard objects that are modified in clients other than 000.
To put your modifications into effect, you must also modify the ABAP print program used to print documents that use this form. You should rename such print programs and store them in your own Y or Z development classes.
You can use the SAP Customizing System to replace the SAP print program with your modified print program in the affected applications.
Forms: Concepts
Forms are used to control the page layout and also the text formatting in your documents. Before formatting a document for output to the screen or to a printer, you must assign a form to it. If you do not specify a form for a document, then the SYSTEM form is assigned to the document by default.
Application-specific forms are used in SAP applications to specify the page layout for such special documents as invoice or checks. These forms specify the structure of the information on the page(s) of such a document. They define, for example, the address header, item lines, the footer, and so on.
There are two ways to format texts with forms:
In the standard SAPscript text processing (Tools ® Word processing ® Standard text), you can select a form for a document. You can then type text into the main window of the form and output the document in the format defined in the form.
For example, you can select a form for a letter. You can then type the body text of the letter in the main window. When you print the letter, the default text elements in the other windows of the form (heading, footer, and so on) are printed with the body text.
A document can be generated by a print program in one of the SAP applications. The print program uses a form to generate the document. Most correspondence and document generation in the SAP System are handled by way of print programs.
A print program selects the text elements that are to be printed in the windows of a form. It may also collect information from the user or ask the user to input text directly, as in some correspondence functions. The print program may also provide data for variables defined in the form.
Finally, the print program uses the form to format the document for display or printing.
Check this link...
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/802d7d454211d189710000e8322d00/frameset.htm
Thanks and Regards,
Bharat Kumar Reddy.V

Role Menu for ESS (WDA) in SAP NWBC

Dear experts,
I am implementing ESS&MSS using SAP NWBC. For this use the following documentation:
Configuration of the Role Menu for ESS (WDA) in SAP NWBC - SAP Documentation
SAP delivers the composite role SAP_EMPLOYEE_ESS_WDA_2.
1. Call up transaction PFCG and create or copy your customer-specific role based on the standard shipped composite role for ESS (WDA), SAP_EMPLOYEE_ESS_WDA_2 in the customer name space (Z_*.
I have copied this role with the singles roles
My first question: Should modify my composite role for add a new folder that content two applications WDA customer or this should do it in the single role ? How Can do it?
My second question:
What I dont can display the folder in top screen "Employee Self-Service"---"Employee Self-Service XX"---"Employee Self-Service2"(See Image leff)
Thanks

Hi Armin,
For NWBC you must place transactions under the second folder down (or at least this is how its works for NWBC for ERP roles). Standard NWBC roles have 'Role menu' as top folder and then (generally) one main folder under that - like 'Purchasing'. Transactions should go under this folder or under subsequent sub-folder.
There are additional parameters using right click 'Details for Net Weaver Business Client' under PFCG also - but assume your documentation has explained this to you.
Regards,
Craig

Scripting with Vbscript against SAPGUI

Hello everyone,
Im new in this field, the thing is that i want to create scripts with vbscript in order to automate some business processes.
I have been reading the SAP GUI Scripting API guide, and some other documents, but i dont know how to use the classes, methods, functions, etc. of the sapfewselib.
Somebody, know how to make reference to this library in order to use it on Vbscript??
If you can put some code examples, that will be great.
Thanx,

Please find sapfewse.ocx
(C:\Program Files\SAP\FrontEnd\SAPgui\sapfewse.ocx)
and try this code:
Dim sap As New GuiApplication
Set conexion = sap.OpenConnection("name_of_the_server_in_SAP Logon")
Set sesion = conexion.Children(0)
sesion.findById("wnd[0]").maximize
sesion.findById("wnd[0]/usr/txtRSYST-MANDT").Text = "Client"
sesion.findById("wnd[0]/usr/txtRSYST-BNAME").Text = "User" '
sesion.findById("wnd[0]/usr/pwdRSYST-BCODE").Text = "password"
sesion.findById("wnd[0]/usr/pwdRSYST-BCODE").SetFocus
sesion.findById("wnd[0]/usr/pwdRSYST-BCODE").caretPosition = 8
sesion.findById("wnd[0]").sendVKey 0
or try this:
Set gi = CreateObject("SAPGUI.ScriptingCtrl.1")
the better way to work with SAP GUI Scripting is with a record. Please go to RZ11 transaction and change the following parameter to TRUE:
sapgui/user_scripting
then Logoff an Logon again
then Alt+F12 (Customizing for Local Layout), click in Script Recording and Playback and record some transaction
the generated code is itself executable and you can modify o attach this code to another software that supports VBScripting like MSExcel
If Not IsObject(application) Then
   Set SapGuiAuto = GetObject("SAPGUI")
   Set application = SapGuiAuto.GetScriptingEngine
End If
If Not IsObject(connection) Then
   Set connection = application.Children(0)
End If
If Not IsObject(session) Then
   Set session    = connection.Children(0)
End If
If IsObject(WScript) Then
   WScript.ConnectObject session,     "on"
   WScript.ConnectObject application, "on"
End If
session.findById("wnd[0]").maximize
session.findById("wnd[0]/tbar[0]/okcd").text = "/nMM01"
session.findById("wnd[0]").sendVKey 0
session.findById("wnd[0]/usr/cmbRMMG1-MBRSH").key = "1"
session.findById("wnd[0]/usr/cmbRMMG1-MTART").key = "ROH"
session.findById("wnd[0]/usr/cmbRMMG1-MTART").setFocus
session.findById("wnd[0]/tbar[1]/btn[5]").press
session.findById("wnd[1]/usr/tblSAPLMGMMTC_VIEW").getAbsoluteRow(0).selected = true
session.findById("wnd[1]/tbar[0]/btn[0]").press
session.findById("wnd[0]/usr/tabsTABSPR1/tabpSP01/ssubTABFRA1:SAPLMGMM:2004/subSUB1:SAPLMGD1:1002/txtMAKT-MAKTX").text = "TEST"
session.findById("wnd[0]/usr/tabsTABSPR1/tabpSP01/ssubTABFRA1:SAPLMGMM:2004/subSUB2:SAPLMGD1:2001/ctxtMARA-MEINS").text = "UN"
session.findById("wnd[0]/usr/tabsTABSPR1/tabpSP01/ssubTABFRA1:SAPLMGMM:2004/subSUB2:SAPLMGD1:2001/ctxtMARA-MEINS").setFocus
session.findById("wnd[0]/usr/tabsTABSPR1/tabpSP01/ssubTABFRA1:SAPLMGMM:2004/subSUB2:SAPLMGD1:2001/ctxtMARA-MEINS").caretPosition = 2
session.findById("wnd[0]/tbar[0]/btn[11]").press
If you have any doubts please feel free to send me an email, I have worked some years with SAP GUI Scripting.
Regards,
Arturo Bernal
[email protected]

Adding *SAP Gui Scripting* in windows 2003

Hi,
we r devloped some z programs, and it is displayed properly in client desktp (XP). But it is not displyed properly in (OS) Windows 2003 server.
So i added SAP Gui Scripting through Gui instalation and it displyed ok. But at same time my SAP Logon pad will hide from my desktop.
So again i installed my SAP gui with
1. SAP Gui Suite
2. R/3 Add-on
3. General Add-on
Again same problem that is not visible when i am adding SAP Gui Scripting saplogon pad will automatically hide from my desktop.
GUI version 7.10
What could be resons?
Regards
Edited by: manoj nayak on Apr 6, 2010 9:51 AM
Edited by: manoj nayak on Apr 6, 2010 10:18 AM

Hi,
Can u give more information how to troubleshot this one?
And why after install (add) of SAP GUI SCRIPT SAP logon pad will automatically remove from desktop?
Error:
The system cannot find the file specified.
Destination:
C:\Program Files (x86)\SAP\FrontEnd\sapgui\wwi\wwilabel.exe
Error-Code:
2147024894
Any idea?
Regards.

Send/Receive IDOCs (XML) from/to SAP R/3 with XI-SOAP without XI!

Dear SAP specialists,
(BACKGROUND) We are using the Microsoft BizTalk Adapter for SAP 1.0, developed on top of the SAP DCOM Connector (we are using the version 6.20 Patch Nr. 177), with Microsoft BizTalk Server 2002 SP1 in order to send and receive IDOC via the tRFC transport protocol. We are using the Microsoft BizTalk Adapter for SAP 1.0 since February 2002, and today we are exchanging more than 25,000 IDOC/day with this architecture.
When we migrate our SAP R/3 system to the version 4.7 with WAS 6.20, I was very enthusiastic about the possibility of sending the IDOC in XML via the standard HTTP transport protocol, because it would considerably simplify my architecture, i.e. no need of any (expensive) adapter any more! But, I had to realise that the quality of service exactly once will not be there anymore with HTTP as it exists with tRFC. Then, we carry on using the tRFC transport protocol with the adapter.
(QUESTION) But recently, I followed the SAP Course TBIT40 XI Foundations and I learn that:
1. On one hand, the XI-SOAP protocol supports the quality of service exactly once by the usage of a message GUID within the XI-SOAP envelope;
2. On the other hand, all mySAP solutions using WAS 6.20 (or higher) carry a small Integration Engine (with XI-SOAP as the native transport protocol).
Then, my question is: << Is it possible to exchange IDOC (XML) directly with an SAP R/3 4.7 (WAS 6.20) via the XI-SOAP transport protocol using the small Integration Engine embedded into it, with the quality of service exactly once? >>
Many thanks in advance and best regards,
Patrice Krakow

Hello Patrice
We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
Since your que is three years old, I'm sure you must have found some method for this.
We'll highly appreciate your help.
Regards: Gaurave

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

SAP GUI Scripting Wizzard Windows7 does not work

Dear Experts,
I am quite a novice when it comes to SAP GUI scripting (let alone any other development), therefore my question might be rather stupid. After my PC was migrated from XP to Windows 7 it is no longer possible to use the SAP GUI scripting wizzard. When you select it from the menue, simply nothing happens.
Does anyone have an idea what I need to do to have this useful tool back on my PC?
We are running SAP GUi 7.1
Thanks for your help
Theo

Here is SAP GUI wizard replacement tool...its in auto IT - enjoy
http://www.autoitscript.com/forum/topic/149540-sapwizardudf/
I had the tech guys here install , the latest GUI patch level 15,
and the script development tools not working issue has been fixed
They (SAP?) removed the 'script development tools' menu option!?
I have not installed the MS hotfix, but
My question is, it true the 'Script development tools' is gone?
Other methods
a) This (free) non SAP solution seems to work however...any other ideas?
Scripting Tracker Lite
http://scn.sap.com/docs/DOC-32728
b) The Activate GuiXT tool in SAP GUI also does give you some clues in the element window
and could be an alternative way , to get control names.
eg a radio button is R[P_CONTROL_ID] when it should be radP_CONTROL_ID
c) The SAP script recording and playback , to a vbs script will give you the control names also, if you edit the script.
You must of course have GUI scripting on in rz11
I can't read this note https://service.sap.com/sap/support/notes/1633639 - need a password!

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to take the data from excel list to sap r/3(with time interval)

hi experts,
   how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.

Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '500'
      giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva

SAP NWBC Scripting with LoadRunner

Similar Messages

Maybe you are looking for