SAP-OSS Connection Error

Hi,
 Am facing a problem while connecting SAP-OSS from SM59. I can able to ping 194.39.131.34 successfully from my saprouter system,router command also working fine as below.
D:saprouter>saprouter -r -S 3299 -K "p:CN=<hostname of saprouter> , OU=0000849108,OU=SAProuter, O=SAP, C=DE"
trcfile dev_rout
no logging active
Iam able to login my devleopment and solution manager systems from out side network also successfully.
But iam unable to connect the SAP-OSS (SM59) from development and solution manager.before that its working fine from last days iam getting the problem of SAP-OSS connection.
Here Iam sending the OSS Connection error on SM59 and dev_rout file after iam checking SAP-OSS through SM59.
SM59 Error :
Error Details Error when opening an RFC connection
Error Details ERROR: SNC processing failed: SncSessionInitiatorAK
Error Details LOCATION: SAProuter 39.3 (SP4) on 'AEOM1SAP05'
Error Details DETAIL: NiSncIInitHdlSecurity: sncrc=-4;000000000275AE40
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 8
Error Details MODULE: nisnc.c
Error Details LINE: 1121
Error Details RETURN CODE: -104
Error Details SUBRC: 0
Error Details RELEASE: 710
Dev_Rout File :
ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1439]
 GSS-API(maj): No credentials were supplied
 GSS-API(min): No credentials found for this name (not logged on) (USER=sncadm)
 Could't acquire INITIATING credentials for
 name="p:CN=AEOM1SAP05, OU=0000757839, OU=SAProu"
<<- SncSessionInitiatorAK()==SNCERR_GSSAPI
'target_acl_key' (addr=000000000202C374, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
ERROR => NiSncIInitHdlSecurity: SncSessionInitiatorAK failed (sncrc=-4;00000000027DFB50) [nisnc.c 1124]
ERROR => NiSncHandleForAddr C9/-1, 194.39.131.34 (rc=-17) [nirout.cpp 3272]
ERROR => NiRClientHandle: NiRExRouteCon for C9/-1 'AEOM1SAP05.aeom.local' failed (rc=-17) [nirout.cpp 2650]
Guide me the same.
Thanku
Thanku

Hi hashit,
1 st Restart the Solman Server and go to command prompt. Then select the SAPROUTER drive ( D: > cd saprouter )
Currently, your SNC Saprouter process is not up and running, please stopyour saprouter process with command ' saprouter -s ' and restart it using the following with correct User.
D:saprouter> saprouter -r -V2 -K "p:CN=<hostname>, OU=<Number>, OU=SAProuter, O=SAP, C=DE"
Please note that to ensure you Saprouter process is running, you must not close the command prompt screen after you started the above. Once you closed the screen, your saprouter process is stopped and your connection to SAP is dropped.
Please try it and Let me know
Regards
Thomas.T

Similar Messages

SAP-OSS Connection error LB: Unexpected error in LG Layer.

Hi Gurus,
I am using Solman 3.2 on Oracle/Win 2003 server.
While doing Test connection for SAP-OSS Connection error "LB: Unexpected error in LG Layer" is coming.
Please guide me through configuration steps .
I am using following settings which is appearing by default:
Connection type 3
Load distrib. : Yes
Target system : OSS
Msg. server : /H/147.204.2.5/S/sapdp99/H/oss001
Group : EWA
Regards
Gaurav

Hello Gaurav,
- in transaction SM59, delete the RFC destinations SAPOSS - in transaction OSS1 -> parameter -> technical settings, save the
actual configuration. After that, in SM59, test again the connection
Did you get this connection SAPOSS working before or this is the first try?
Check note 35010.
Hope this helps,
Dolores

SAP OSS Connection Error # 111

Hi All,
We are facing an error while connecting to the OSS. The technical settings in OSS1 transaction are specified correctly.
Below is the error we are facing
Error when opening an RFC connection
ERROR: partner 'xx.xxx.xx.159:sapdp99' not reached
LOCATION: SAP-Server sapsop01_SOL_01 on host sapsop01 (wp 0)
DETAIL: NiPConnect2
CALL: connect
COMPONENT: NI (network interface)
COUNTER: 174
ERROR NUMBER: 111
ERROR TEXT: Connection refused
MODULE: nixxi.cpp
LINE: 2845
RETURN CODE: -10
SUBRC: 0
RELEASE: 701
TIME: Wed Jan 18 20:20:17 2012
VERSION: 38
We are not able to connect to the SAP Router. We have our servers in different location with a firewall in between.
Please let me know how to resolve this issue and also provide me the list of ports to be opened to connect to the SR.

Dear Ramkiran
SAP router will use port no 3299 tcp port connet to SAP. Firewalls block this port if not set to allow.
If your firewall is having ip masquarading set local SAP router to represent to SAP check weather the setting are correct?
to verify connect bypassing Saprouter.
reg
priyanshann

SAP-OSS connection failure

Hi,
SAP-OSS connection (as tested through SM59) suddently failed to work and constantly throws the following error message:
Error Details Error when opening an RFC connection
Error Details ERROR: SNC processing failed: ?
Error Details LOCATION: SAProuter 37.11 on sapdev
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 44
Error Details MODULE: nisnc.c
Error Details LINE: 502
Error Details RETURN CODE: -104
Error Details SUBRC: 0
Error Details RELEASE: 640
Error Details VERSION: 37
Our server's name is "sapdev".
My question: can this error be related with SAP side or is it strictly our company's networking issue? I've contacted our IT office already; however, they didn't notice anything suspicious.
Also, where can I find a table with error return codes listed? To decipher what -104 in this case means?
Thanks
Janek

I also checked "dev_rout" file (the log file), which lists the following error message:
LOCATION SAProuter 37.11 on sapdev
ERROR GSS-API(maj): The referenced credentials have expired
GSS-API(min): Validity date of certificate is invalid
target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
TIME Tue Nov 06 08:48:54 2007
RELEASE 640
COMPONENT SNC (Secure Network Communication)
VERSION 5
RC -4
MODULE sncxxall.c
LINE 3411
DETAIL SncPEstablishContext
SYSTEM CALL gss_init_sec_context
ERRNO
ERRNO TEXT
DESCR MSG NO
DESCR VARGS GSS-API(maj): The referenced credentials have expired;;;;
;;;;GSS-API(min): Validity date of certificate is invalid;;;;
;;;;target="p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
DETAIL MSG N
DETAIL VARGS
COUNTER 3
<<- ERROR: SncProcessOutput()==SNCERR_GSSAPI
ERROR => NiSncInitiate: SncProcessOutput (rc=-4) [nisnc.c 502]
ERROR => NiSnc2Connect C0, 194.39.131.34 (rc=-17) [nirout.cpp 2607]

RFC SAP-OSS & SAPOSS Error

Hello,
RFC SAP-OSS shows this error....
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner 'SAP-SOLMAN:sapdp99' not reached
Error Details LOCATION: SAP-Server SAP-SOLMAN_SOL_00 on host SAP-SOLMAN (wp 1)
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 104
Error Details ERROR NUMBER: 10061
Error Details ERROR TEXT: WSAECONNREFUSED: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 2845
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Aug 26 10:25:45 2011
Error Details VERSION: 38
RFC SAPOSS shows this error...
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner '192.168.0.147:sapdp99' not reached
Error Details LOCATION: SAP-Server SAP-SOLMAN_SOL_00 on host SAP-SOLMAN (wp 1)
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 112
Error Details ERROR NUMBER: 10061
Error Details ERROR TEXT: WSAECONNREFUSED: Connection refused
Error Details MODULE: nixxi.cpp
Error Details LINE: 2845
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Fri Aug 26 10:29:14 2011
Error Details VERSION: 38
We have done add these entries in saprouttab...
#SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.2 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.2 3389
outbound connections to <sapserv2> will use SNC
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 203.123.135.84 3299
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 3299
permission entries to check if connection is allowed at all
P 192.168.0.2 194.39.131.34 *
P 192.168.0.147 194.39.131.34 *
But Still not able to resolve this isse....
Please help
Thanks,
Abha

Hi All,
SAPRouter is working fine but dev_rout files shows this
nihsl-init: alloc host/serv bufs (200/200 entries)
NiIInit: allocated nitab (811 entries at 01530048)
NiIInit: host-/servbuffer alreay initialized
SAP Network Interface Router, Version 37.11
Compiled Dec 5 2005 23:28:45
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 2
command line arg 4: -K
command line arg 5: p:CN=SCLSAPDEV-SOL, OU=0001193985, OU=SAProuter, O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
logfile : no logging active
portrange : no portrange active
local address : default address
SncInit(): Initializing Secure Network Communication (SNC)
 PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/32/32)
SncInit(): Trying environment variable SNC_LIB as a
 gssapi library name: "C:\saprouter\ntintel\sapcrypto.dll".
load shared library (C:\saprouter\ntintel\sapcrypto.dll), hdl 0
 using "C:\saprouter\ntintel\sapcrypto.dll"
File "C:\saprouter\ntintel\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
<<- SncInit()==SAP_O_K
 sec_avail = "true"
<<- SncSetMyName()==SAP_O_K
 in: myname = "p:CN=SCLSAPDEV-SOL, OU=0001193985, OU=SAProuter, O=SAP, C=DE"
NiSetParamEx: switch NIP_CONNLOCAL off
NiSetParamEx: Set UDS path to /tmp/.sapstream%d
NiIMyHostName: hostname = 'SCLSAPDEV-SOL'
main(): pid = 15960, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a SAProuter)
NiIInitSocket: set default settings for socket 360
NiCreateHandle: state hdl 1 / socket 360 NI_INITIAL
NiPBind: set option SOL_SOCKET-SO_REUSEADDR of socket 360 TRUE
NiSetStat: state hdl 1 NI_LISTEN
NiBufHdlInit: BufInit for hdl 1
NiIListen: listen for client requests on hdl 1
reading routtab: ./saprouttab
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '5631' = port 15.FF/5631
nihsi-getServNo: servicename '5631' = port 15.FF/5631
nihsi-getServNo: servicename '23' = port 00.17/0023
nihsi-getServNo: servicename '23' = port 00.17/0023
nihsi-getServNo: servicename '1503' = port 05.DF/1503
nihsi-getServNo: servicename '1503' = port 05.DF/1503
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
ERROR => invalid token (168*) in IPadr-string, skip line 25 [nirout.cpp 8451]
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
nihsi-getServNo: servicename '3200' = port 0C.80/3200
nihsi-getServNo: servicename '3389' = port 0D.3D/3389
nihsi-getServNo: servicename '3299' = port 0C.E3/3299
nihsi-getServNo: servicename '3299' = port 0C.E3/3299
Thanks,
Abha

Sap oss connection failed.

Dear exports,
I am getting the oss connection failed error.How it will reslove please provide any solution.
I have checked in sm59.
logon : connection error.
1)errordetails: error when opening the RFC an connection.
2)errordetail : error partner: avbc.ad.12.13. sapdp99 not reached.
3)errodetail: location: sap_server_name.
4)errordetail: details:NIPCONNECT2.
5)errordetail: call:connect.
6)errordetail:component NI(network interface).
7)errprdetail: counter:100.
8)errordetail:errornumer:10061.
9)errordetail: error text:wsaeconnectrefused:connection refused.
10)errordetail:module:nixxi.ccp.
11)errordetail:line:2823.
12)errordetail: return code:-10
regards,
Raman

Is SAP Router is installed and configured. Is it registered under the customer ID in SMP. Once you register in SMP you need to import in the SAP Router.
If SAP Router is already configured, have set up a connection in OSS1 t code.
if not check the link for the Router installation https://websmp104.sap-ag.de/SAPROUTER

SAP - VB CONNECT ERROR

Hi Experts
    I am using the following code for SAP-VB Connect, but returns the syntax error in the below line, whats the error actually, and how to correct this, pls help me on this.
   If sapConnection.logon(0, False) True Then
   The code collected from the one of the forum.
Regards
Rajaram
Private Sub Command1_Click()
Dim functionCtrl As Object 'Function Control (Collective object)
Dim sapConnection As Object 'Connection object
Dim theFunc As Object 'Function object
'Create a function object
Set functionCtrl = CreateObject("SAP.Functions")
'Connect to R/3
Set sapConnection = functionCtrl.Connection
sapConnection.Client = "391"
sapConnection.user = "sap01" 'You user id
sapConnection.Language = "EN"
sapConnection.password = "victory' You password"
If sapConnection.logon(0, False) True Then
MsgBox "No connection to R/3!"
Exit Sub 'End program
End If
Sheet1.Cells.Clear
Sheet1.Cells.Font.Name = "Times New Roman"
Sheet1.Cells.Font.Size = 11
'*********************** BAPI_WAGETYPE_EMPLOYEEGETLIST *********************
Dim returnFunc As Boolean
Dim returnParam As Object
Dim pernr As Long
Dim row, col As Integer
Dim retTab As Object
pernr = InputBox("Enter Employee Personnel Number")
Set theFunc = functionCtrl.Add("BAPI_WAGETYPE_EMPLOYEEGETLIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
theFunc.exports("LANGUAGE") = "EN"
returnFunc = theFunc.call
'Cells(2, 1) = "Function Return Value"
'Cells(2, 2) = returnFunc
Set returnParam = theFunc.imports("RETURN")
Cells(1, 1) = "Personnel Number"
Cells(1, 2) = pernr
Cells(1, 2).Font.Bold = True
'Cells(3, 1) = "Message Ret Type"
'Cells(3, 2) = returnParam("TYPE")
Range(Cells(1, 1), Cells(3, 1)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(1, 2), Cells(3, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 1).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 2).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 3).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 4).BorderAround , xlThick, xlColorIndexAutomatic
Cells(4, 5).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(1, 1), Cells(3, 1)).Font.Bold = True
Set retTab = theFunc.tables("WAGETYPES")
rw = 5
cl = 2
Cells(4, 1) = "WAGE LIST"
Cells(4, 1).Font.Bold = True
Cells(4, 2) = "Wage Type"
Cells(4, 3) = "Wage Text"
Cells(4, 4) = "Start Date"
Cells(4, 5) = "End Date"
For Each retTab In retTab.Rows
cl = 2
Cells(rw, cl) = retTab("WAGETYPE")
Cells(rw, cl + 1) = retTab("WAGELTEXT")
Cells(rw, cl + 2) = retTab("VALBEGIN")
Cells(rw, cl + 3) = retTab("VALBEGIN")
rw = rw + 1
Next
Range(Cells(5, 2), Cells(rw - 1, cl + 3)).BorderAround , xlThick, xlColorIndexAutomatic
'******************** BAPI_PERSDATA_GETDETAILEDLIST *********************
Set theFunc = Nothing
Set returnParam = Nothing
Set theFunc = functionCtrl.Add("BAPI_PERSDATA_GETDETAILEDLIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
returnFunc = theFunc.call
Set returnParam = theFunc.imports("RETURN")
Dim dettab As Object
Set dettab = theFunc.tables("PERSONALDATA")
Cells(10, 1) = "EMPLOYEE DETAILS"
Cells(10, 2) = "First Name"
Cells(11, 2) = "Last Name"
Cells(12, 2) = "Gender"
Cells(13, 2) = "Date of Birth"
Cells(14, 2) = "Country of Birth"
Cells(15, 2) = "Marital Status"
Cells(16, 2) = "Nationality"
Cells(17, 2) = "SSN No."
Cells(10, 1).Font.Bold = True
Cells(10, 1).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(10, 2), Cells(17, 2)).Font.Bold = True
Range(Cells(10, 2), Cells(17, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(10, 3), Cells(17, 3)).BorderAround , xlThick, xlColorIndexAutomatic
For Each dettab In dettab.Rows
Cells(10, 3) = dettab("FIRSTNAME")
Cells(11, 3) = dettab("LASTNAME")
If dettab("GENDER") = 1 Then
Cells(12, 3) = "Male"
ElseIf dettab("GENDER") = 2 Then
Cells(12, 3) = "Female"
Else
Cells(12, 3) = "Others"
End If
Cells(13, 3) = dettab("DATEOFBIRTH")
Cells(14, 3) = dettab("COUNTRYOFBIRTH")
Cells(15, 3) = dettab("MARITALSTATUS")
Cells(16, 3) = dettab("NATIONALITY")
Cells(17, 3) = dettab("IDNUMBER")
Next
'****************** BAPI_GET_PAYROLL_RESULT_LIST ***************
Set theFunc = Nothing
Set returnParam = Nothing
Set theFunc = functionCtrl.Add("BAPI_GET_PAYROLL_RESULT_LIST")
theFunc.exports("EMPLOYEENUMBER") = pernr
returnFunc = theFunc.call
Set returnParam = theFunc.imports("RETURN")
Cells(19, 1) = "Directory of payroll results"
Cells(19, 1).Font.Bold = True
Cells(19, 1).BorderAround , xlThick, xlColorIndexAutomatic
Cells(20, 1) = "SEQNR "
Cells(20, 2) = "FPPERIOD"
Cells(20, 3) = "FPBEGIN"
Cells(20, 4) = "FPEND"
Cells(20, 5) = "BONUSDATE"
Cells(20, 6) = "PAYDATE"
Cells(20, 7) = "PAYTYPE_TEXT"
Range(Cells(20, 1), Cells(20, 7)).Font.Bold = True
Range(Cells(20, 1), Cells(20, 7)).BorderAround , xlThick, xlColorIndexAutomatic
Set retTab = theFunc.tables("RESULTS")
rw = 21
For Each retTab In retTab.Rows
cl = 1
Cells(rw, cl) = retTab("SEQUENCENUMBER")
Cells(rw, cl + 1) = retTab("FPPERIOD")
Cells(rw, cl + 2) = retTab("FPBEGIN")
Cells(rw, cl + 3) = retTab("FPEND")
Cells(rw, cl + 4) = retTab("BONUSDATE")
Cells(rw, cl + 5) = retTab("PAYDATE")
Cells(rw, cl + 6) = retTab("PAYTYPE_TEXT")
rw = rw + 1
Next
Range(Cells(20, 1), Cells(rw - 1, 1)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 2)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 3)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 4)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 5)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 6)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 7)).BorderAround , xlThick, xlColorIndexAutomatic
Range(Cells(20, 1), Cells(rw - 1, 7)).HorizontalAlignment = 3
'***************** LOGOFF ****************************************
functionCtrl.Connection.logoff
Set sapConnection = Nothing
Set functionCtrl = Nothing
End Sub

It will be helpfull, if you can send any screen shot of error page.
Thanks ,
Chetan

SAP OSS Connection...

Q 1) Can someone tell me the link between following OSS Connection components:
1) SAP Router on customer Side
2) SAP R/3 Connection SAPOSS
3) SAP Router on SAP Side.
Q 2) Do I install SAP Router on the customer side on the same server on which R/3 instance is installed ?
Thanks.
Regards,
Rajesh

Hi Rajesh,
Maybe this simple map can help you.
Cust SAP Server -- SAP router (SNC) -Internet- SAP SAProuter (SNC) -- SAP
SAP use SNC (Secure Network Communication) to support their customer. You have to set your SAProuter to be SNC-ready before SAP can help you if you have serious problem on your SAP server.
I suggest not installing SAP router on the same server. Install SAP router on your site using different box. You can place SAP router (with SNC configuration) on DMZ of your internal network.
Hope this can help you.
ardhian

SAP Plant Connectivity Error

Hi All,
We are using Plant Connectivity 2.0.1.7 with SAP MII 12.1.4.
we have configured two agents which are running automatically but agents got stopped whenever there is upgrade in MII and again we need to reconfigure agents.
Please resolve this issue.
Regards,
Manoj Bilthare

Hi, just to follow up on what Manoj has mentioned. MII was always on 12.1, but patches were updated. When this happened, we got errors that the PCo couldn't connect to the Destination (MII). What happened, was the PCo Agent would start and work for a period, but then when it tried to re-connect (I think after the initial session timed out), it wasn't able to, saying invalid version of MII. If we stopped and started the PCo, it would run for a time and then fall over again.
We reconfigured the MII Destination (still just selected 12.1) and then deleted the PCo agents and re-configured them. Now we're getting the error that there's an invalid date format - not too sure where it could pick that up other than from the OPC Server. All the Agents are doing is monitoring one tag each. If the tag value = 1, then the notification fires and calls the MII transaction.
The OPC Source hasn't changed, all that's changed is we've patched MII.
Has anyone else experienced this same sort of behaviour from the PCo 2.0?
Edited by: Lawrence Prinsloo on Mar 15, 2010 4:44 PM
Edited by: Lawrence Prinsloo on Mar 15, 2010 4:45 PM

SAP DB connect errors

Hi
We have an SRm 7.0 running on windows 2003 64 bit the database is MS-SQL 2005. We keep getting the connect and disconnect errors.
DB-error 11
BVV
BVY
BV4
etc.
I dont see a place to attach the screen shot here.

Hi,
This error is normally caused by network issues as described by note 392892.
You can run a Long LAN stability test (note 500235).
You can also try:
- update to SP3
- update your database library (DBSL note 19466)
Regards,
Eduardo Rezende

Saprouter problem ,, no connectivity to SAP OSS

Hi Tea,
WE have a problem with SAP OSS Connectivity, there is a failure for SNC and the log shows the follwoing error message
when we try to ping the oss conection from sm59
Logon    Connection Error
Error Details       Error when opening an RFC connection
Error Details       ERROR: SNC processing failed: SncProcessInput
Error Details       LOCATION: SAProuter 39.2 (SP4) on 'sapserv2a'
Error Details       DETAIL: NiSncIProcIn: sncrc=-4;8000000100498dc0
Error Details       COMPONENT: NI (network interface)
Error Details       COUNTER: 135
Error Details       MODULE: nisnc.c
Error Details       LINE: 946
Error Details       RETURN CODE: -93
Error Details       SUBRC: 0
Error Details       RELEASE: 710
Error Details       TIME: Tue Jul 20 08:43:42 2010
Error Details       VERSION: 39
Please help to resolve these issue.
Thanks
Arpita

Hi!
You have rectified the error?
I too have faced the similar
trc file: "dev_rout", trc level: 1, release: "640"
Tue Jul 27 12:50:16 2010
SAP Network Interface Router, Version 37.11
Tue Jul 27 12:51:07 2010
ERROR => NiProcMsg: rc=-104 (NIEROUT_SNC_FAILURE) from router [nibuf.c      423]
Somebody has ideas?

Not able to OPEN OSS connection to sap

Dear Gurus,
whenever i open oss connections, the connection failing to open with the "Host did not respond 8 times " error before changing to Cancel. .
I have checked the SAP OSS connection in SM59 it seems to be OK connection as well as authorizatrion test.
I have checked the SAPROUTTAB entries
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 3299
SNC-connection from SAP to local R/3-System for pcAnywhere
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 5631
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 5631
SNC-connection from SAP to local R/3-System for SAPtelnet
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 23
SNC-connection from SAP to local R/3-System for Netmeeting
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 1503
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 1503
Access from your local Network to SAPNet - R/3 Frontend
SNC-connection to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.18 3200
SNC-connection from SAP to local R/3-System for pcANYWHERE, if it is needed
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 5631
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <R/3-Server> 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.18 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P 10.250.7.20 194.39.131.34 3299
P sapserv2 10.250.7.20 3200
P sapserv2 194.39.131.34 3200
P * sapserv2 3299
P * 10.250.7.20 3200
P * 10.250.7.20 3299
P * * *
P * 194.39.131.34 3299
P * 194.39.131.34 3389
P * * *
P * sapserv2 sapdp99 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 3389
SNC-connection from SAP to local R/3-System for OS
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.5 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.250.7.20 3200
All other connections will be denied
"Our Routerstring /H/10.250.7.20/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001"
Please help.
Thanks & Regards,
Abhiraj
Edited by: Abhiraj SAP FAN on Jun 13, 2011 2:33 PM

Hi,
1. Please change the SAP Router server host name to another SAP router name (eg: 2 to 3)in your route table & SM59 and then try. (search SAP notes for more SAp router Ip and host name)
2. Check your SAP toute tab SNC certificate expiry, if Yes then request new certificates for SNC with SAP support.
Regards
Kannan.K

SAP Router internal error

Hello
I have installed solution manager 7.0 and then sap router is also configured on the same box.
1. To generate a certificate request,
sapgenpse get_pse -v -r D:\usr\sap\saprouter\certreq -p D:\usr\sap\saprouter\local.pse "CN=sbsapmgrapp01, OU=0000809350, OU=SAProuter, O=SAP, C=DE"
2. Then you have to request the certificate from
http://service.sap.com/tcs -> Download Area -> SAProuter Certificate
3. Create a file D:\usr\sap\saprouter\srcert and copy the requested
certificate into this file. :
sapgenpse import_own_cert -c D:\usr\sap\saprouter\srcert -p
D:\usr\sap\saprouter\local.pse
4. To generate credentials for the user that's running the SAProuter
service:
sapgenpse seclogin -p D:\usr\sap\saprouter\local.pse -O sapadmin
(this will create the file "cred_v2")
5. Check the configuration:
sapgenpse get_my_name -v -n Issuer
(Result: "CN=SAProuter CA, OU=SAProuter,
O=SAP, C=DE")
6. Create SAProuter service on Windows :
ntscmgr install SAProuter -b D:\usr\sap\saprouter\saprouter.exe -p
"service -r -R D:\usr\sap\saprouter\saprouttab -W 60000 -K "CN=sbsapmgrapp01, OU=0000809350, OU=SAProuter, O=SAP, C=DE"
7. Edit the Windows Registry key :
MyComputer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SAProuter\ImagePath
8. Start the SAProuter service -- success
9. Enter the parameters in OSS1 -> Technical Settings -->
hostname : sbsapmgrapp01
IP: 10.1.0.112
instance : 00
SAP host name : sapserv2
IP: 194.39.131.34
instance:99
10. saprouttab
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.0.112 3200
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P 10.1.0.112 194.39.131.34 3299
deny all other connections
D * * *
when I check the sap-oss connection i am getting internal error. Any help would be appreciate..
Thanks
seshu

Hi Rahu
Thanks for your response. Here is my saprouttab entry's
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local Solman System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.0.112 3200
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P     10.1.0.112     194.39.131.34     3299
P     10...*     194.39.131.34     *
Here is my dev_rout file..
trc file: "dev_rout", trc level: 1, release: "700"
Thu Oct 16 02:08:22 2008
SAP Network Interface Router, Version 38.10
command line arg 0:     D:\usr\sap\saprouter\saprouter.exe
command line arg 1:     -r
command line arg 2:     -R
command line arg 3:     D:\usr\sap\saprouter\saprouttab
command line arg 4:     -W
command line arg 5:     60000
command line arg 6:     -K
command line arg 7:     p:CN=sbsapmgrapp01, OU=0000809350, OU=SAProuter, O=SAP, C=DE
SncInit(): Initializing Secure Network Communication (SNC)
      PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/64/64)
SncInit(): Trying environment variable SNC_LIB as a
      gssapi library name: "D:\usr\sap\saprouter\sapcrypto.dll".
File "D:\usr\sap\saprouter\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
main: pid = 1684, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: 'D:\usr\sap\saprouter\saprouttab'
Thu Oct 16 09:14:17 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 256
    (SI_ECONN_REFUSE/10061; I4; ST; 194.39.131.34:3299) [nixxi.cpp    2823]
Thu Oct 16 09:14:20 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 256
    (SI_ECONN_REFUSE/10061; I4; ST; 194.39.131.34:3299) [nixxi.cpp    2823]
Kindly suggest the changes in my saprottab file..
Thanks
seshu
Issue resloved..
Edited by: Seshagiri Rao Myneni on Oct 16, 2008 7:31 PM

Is there a transaction in SolMan to verify OSS Connectivity Status?

Currently, the only way to know whether my SAP OSS connection is still open is by navigation to the Service Marketplace to verify the status of the connection.
Is there a equivalent transaction in Solution Manager that could help validate this? (In the old day, we use to this via tcode OSS1).
Note that this is NOT a connectivity issue; but rather problem with regards to whether the connection is open.

Service Connection provides the required function:
[SAP Solution Manager Help - Service Connections|http://help.sap.com/saphelp_smehp1/helpdata/en/28/9015dd452e48fabfb86098cda89e5b/frameset.htm]
Transaction: SOLMAN_CONNECT

SAP OSS

Hi people,
I want to download the patches through of solution manager, but I have to set up sap oss connection,because it fails to perform the test.What can i do?
Thanks

-The configuration of MO is correct I followed step by step the guide.
-In the saproutertab I have the next entries:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
SNC-connection from SAP to local R/3-System for NetMeeting,
if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 1503
SNC-connection from SAP to local R/3-System for saptelnet,
if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P * 194.39.131.34 3299
Deny the rest connections
D * * *
-In the OSS1 tcode
saprouter1
1-.hostname saprouter
2-.ip saprouter
2-.99
saprouter at sap
sapserv2
194.39.131.34
99
sapnet message server
oss001
O01
01
-In the sm59 tcode
On the sap OSS Connection the follow entries:
technical settins--
load balancing
target system OSS
Msg server /H/IP_SAPROUTER/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
GROUP EWA
logon & security--
client 001
user OSS-RFC
Password CPIC
More thanks for help me.

SAP-OSS Connection Error

Similar Messages

Maybe you are looking for