Sap program TP problem
Hi, everybody!
I have a problem for program TP.
I want know how to create TP method and setting!
I know have a t-code is "SM49" but i don't know how to setting?
Please help me!
Thanks Advanced!
Hi ,
Unable to understand what is your question.If its your TP issue then use latest tp version according to your OS ,DB environment.
Please elaborate moreon this issue.
Thanks..
Mohit
Similar Messages
-
Loading records from .csv file to SAP table via SAP Program
Hi,
I have a .csv file with 132,869 records and I am trying to load it to an SAP table with a customized SAP program.
After executing the program, only 99,999 records are being loaded into the table.
Is there some setting to define how many records can be loaded into a table? Or what else could be the problem?
Pls advice.
Thanks!!!hi Arun ,
A datasource need a extract structure to fetch data .It is nothing but a temp table to hold data.
First you need to create atable in SE11 with fields coming from CSV file.
Then you need to write a report program to read you CSV file and populate your table in BW .
Then you can create a datasource on top of this table .
After that replicate and load data at PSA and use to upper flow.
Regards,
Jaya Tiwari -
i'm having a proplem during starting initial load although i'm using the best practice documents C71 and B09 and all the configration was done by them .... could any one help ??
this is the first dump error for my RFCUSER on the ECC server
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program SAPLCRMC
Application Component CA
Date and Time 05.03.2014 17:50:47
Short Text
The current application has triggered a termination with a short dump.
What happened?
The current application program has detected a situation that should
not occur. A termination with short dump has therefore been triggered
by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
Error analysis
Short text of the error message:
See SAP Note 1498111
Long text of the error message:
Diagnosis
System Response
Procedure
Refer to the SAP Note that was mentioned.
Procedure for System Administration
Technical information about the message:
Message class....... C_
Number.............. 330
Variable 1.......... 1498111
Variable 2..........
Variable 3..........
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occurs in a non-modfied SAP program, you might be able to
find a solution in the SAP Notes system. If you have access to the SAP
Notes system, check there first using the following keywords:
"MESSAGE_TYPE_X"
"SAPLCRMC" bzw. LCRMCF0C
"CHECK_CRMATAB"
If you cannot solve the problem yourself, please send the following
information to SAP:
1. This description of the problem (short dump)
To do this, choose System -> List -> Save -> Local File (unconverted)
on the screen you are in now.
2. A suitable system log
To do this, call the system log in transaction SM21. Restrict the time
interval to ten minutes before the short dump and five minutes after
it. In the display, choose System -> List -> Save -> Local File
(unconverted).
3. If these are programs of your own, or modified SAP programs: Source
code of these programs
To do this, choose More Utilities -> Upload/Download -> Download in
the Editor.
4. Details regarding the conditions under which the error occurred or
which actions and input caused the error.
thanks -
Getting run time errors while executing the copied SAP programs
Hi folks,
i want to copy an sap program.after coping i need to change some coding there.then i have to create a new transaction for that.
i am just copying the sap program RQEEAL10(transaction-QA32) to Z_RQEEAL10. it has 4 include programs.i am copying them to z programs like
RQ00MF10 copied to z_RQ00MF10
RQALVF14 copied to z_RQALVF14
RQALVF16 copied to z_RQALVF16
RQALVTOP copied to z_RQALVTOP.
now i am executing that program Z_RQEEAL10.but i am getting run time errors as given below.
<b>runtime error---</b>
The termination occurred in the ABAP program "Z_RQEEAL10" in
"SELECT_FIELDS_MANIP2_F16".
The main program was "Z_RQEEAL10 ".
The termination occurred in line 257 of the source code of the (Include)
program "RQALVF16"
of the source code of program "RQALVF16" (when calling the editor 2570).
--Error in ABAP statement when processing an internal table.
--When changing or deleting one or more lines of the internal table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS" or when inserting in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS", 0 was used as
the line index. An index less than or equal to zero is not
allowed.
The error can occur when using the following options:
1. "INDEX idx" for specifying the line number in the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS"
where you want to change, insert or delete.
2. "FROM idx" for specifying the start index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
3. "TO idx" for specifying the end index when deleting a line
area from or inserting a line area into the table
"\PROGRAM=Z_RQEEAL10\DATA=SELECT_FIELDS".
When the program terminated, the table had 2 lines.
these r the runtime errors what i am getting.where is the problem?i have activated all interface & includes.plz advice.
Thanks & regardsHi Madhu,
I will give you one more check point where you have to give your concentration while copying the standard programs....
Call Customer-Function (Function Exists) if any in the Program when copied will not get executed. Instead you need to call the FM Directly.
one more is also here
You are likely to have some problems with the text-elements and translation that may have been maintained for the original report.
~~Guduri -
Passing value to a field of SAP Program which do not have "Parameter ID"
Dear Experts,
My requirement is that i need to pass a value from my dialog program to a field of SAP Program which do not have "Parameter ID" attached to it.
For example: If you run SAP Transaction CS14, it has two sections viz., Primary BOM and Secondary BOM. I need to copy and create own screen using Dialog program. The screen appears in custom screen would be similar to that of the SAP Transaction CS14. If you check the fields, all the fields have "Parameter ID" attached to it, except for the following fields which do not have Parameter IDs are "Alternative", "Valid From" and "Required Qty".
Hence how do i pass value to those fields? Kindly help me
To those fields where "Parameter IDs" are attached, i can use below two statements:
Set parameter id <par> field <field>.
call transaction 'CS14' and skip first screen.
Regards,
Ramesh ManoharanHi Harald Boeing,
Thanks you very much. My problem is solved.
Rewarded Points.
Regards,
Ramesh Manoharan -
NW2004 ABAP: Compiling of SAP programs
Hi,
does anybody know how to avoid the time consuming compilation of SAP standard programs when working with NW2004 ABAP?
Example:
I installed NW2004 ABAB Version on my PC.
I can logon to the system and work with it.
When I call a transaction e. g. SE37 the
system starts to compile. This compilation is quite
time consuming.
When I call the same transaction again it is started
without compiling.
That is the standard system behaviour which is fine to me.
Then I logoff and shutdown the sap system using SAP System Management Console.
Then I start the sap system again using SAP System Management Console.
Then I logon to the sap system.
Then I call transaction SE37 and it starts to compile!!!
It seems to me that the runtime version of the
sap programs are not saved in the database.
Everytime I stop and start the SAP System the
programs relvant for a transaction are compiled again.
I extended the space of the database already from 9GB to
18 GB (2 Volumes).
I also run transaction SGEN to compile all programs.
It took 20 hours (the database is filled by 60% now)
but SGEN did not help.
The problem remains the same:
When I start the system and logon the compilation
takes place.
Is there a way to avoid the compilation of programs which
have not been changed since the last compilation?
Thanks for your help
MatthiasHi all,
i've the same problem...
Help. -
Z TCode for Standard SAP Program
Hi all,
Is it allowed by default (by SAP standard rule) to create a Z TCode for the existing standard SAP program? By doing this, I will have two transaction codes for one standard SAP program. One is the existing SAP standard TCode and the other one is the Z (custom) TCode. Both point to the same SAP standard program.
I tried to copy TCode ME22 to ZME22 but I get error message "Transaction code ZME22 not defined" when I tried run it. ZME22 was successfully created (no error) with the same setting as ME22 during copying.
Thanks in advance.
Regards,
Goh Tiam TjaiGoh,
yes obvoiusly you can create another t-code.
as i want to add more thing which all were missed is that you have to create parameter transaction from se93.
and give default transaction as me22 in your case.
hope now your problem has been resolved.
please mark all good answer.
Amit. -
Fetching of multiple files from Application Server into SAP Program
Hi All,
I have a issue related <b>Fetching of multiple files from Application Server into SAP Program</b>.
Actual issue is as below.
In the <b>selection screen</b> of <b>my program</b> i will give <b>Application Server Path</b> as :
<b>/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*</b>
Then the based on above input it should pick up all the files that are matching <b>eppi0720*</b> criteria.
Suppose if i am having <b>5</b> files with above scenario, i have to fetch all those <b>5</b> files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
name_of_file(260) type c,
name_of_path(1285) type c.
data: begin of file_list occurs 100,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file_list.
data: begin of file,
dirname type name_of_dir, " name of directory. (possibly
" truncated.)
name type name_of_file, " name of entry. (possibly
" truncated.)
type(10) type c, " type of entry.
len(8) type p, " length in bytes.
owner(8) type c, " owner of the entry.
mtime(6) type p, " last modification date, seconds since 1970
mode(9) type c, " like "rwx-r-x--x": protection mode.
useable(1) type c,
subrc(4) type c,
errno(3) type c,
errmsg(40) type c,
mod_date type d,
mod_time(8) type c, " hh:mm:ss
seen(1) type c,
changed(1) type c,
end of file.
call 'C_DIR_READ_FINISH' " just to be sure
id 'ERRNO' field file_list-errno
id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
id 'FILE' field p_file
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
sy-subrc = 4.
exit.
endif.
* Read the file list and add to internal table.
do.
clear file.
call 'C_DIR_READ_NEXT'
id 'TYPE' field file-type
id 'NAME' field file-name
id 'LEN' field file-len
id 'OWNER' field file-owner
id 'MTIME' field file-mtime
id 'MODE' field file-mode
id 'ERRNO' field file-errno
id 'ERRMSG' field file-errmsg.
if sy-subrc = 1.
exit.
endif.
append file to file_list.
enddo.
* Write out the file list
loop at file_list.
write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman -
I need some detail solutions and suggests about below these problems [SAP R/3] :
Problem 4: Problems in the installation of SAP R/3 Server
Problem 4.1: Computer Name of the SAP R/3 server has been changed after the full installation of Oracle 9i and SAP R/3.
Problem 4.2: A network card of a server was faulty and it was replaced by a new network card but the SAP R/3 license was expired.
Problem 4.3: You would like to reinstall SAP R/3 on a server which has previously installed with SAP R/3 but the same error message appears during the re-installation.HI,
I don't know the answer to your questions, but these are more of a SAP Baisis question. I would suggest posting this question on the Basis forum.
Naing -
Need to start a program in Oracle System (External) from sap program
Hi guys,
I need to start a program in another oracle based system from sap program by writing native sql statements.
Does anyone have idea how to do this.
Rgds,
RamHi,
Here is another sample for procedures.Kindly reward points by clicking the star on the left of reply,if it is useful.
Code Sample for writing a procedure with input and output parameters
REPORT zzz_jaytest.
* Getting the regno and total as input parameters
PARAMETERS : p_regno(10) TYPE c DEFAULT 'R1000',
p_total TYPE i.
data : v_total type i.
* In this procedure, we are updating the total of a regno given as input.
* Here two parameters used in the procedure are input parameters.
* We are updating the record of regno entered in selection screen and
* adding the total entered to the already existing total. We have to give semicolon
* for the statement inside procedure.
exec sql.
CREATE or replace PROCEDURE PROC1 ( p_regno in char, p_total in number )
IS
BEGIN
UPDATE stu_det SET total = total + p_total where regno = p_regno;
END;
endexec.
* This is the code to execute the procedure for update.
* While executing the procedure, the parameter variable should be
* preceded with colon :
EXEC SQL.
EXECUTE PROCEDURE PROC1 ( in :p_regno, in :p_total )
ENDEXEC.
* In this procedure, we are selecting the details for the regno entered
* as input. Here p_regno is input parameter and v_total is used as output
* parameter. So that we can use the retrieved value of v_total in our
* ABAP program
exec sql.
CREATE or replace PROCEDURE PROC2 (p_regno in char, v_total out char)
IS
BEGIN
select total into v_total from stu_det
where regno = p_regno;
END;
endexec.
* This is the code to execute second procedure.
EXEC SQL.
EXECUTE PROCEDURE PROC2 ( in :p_regno, out :v_total )
ENDEXEC.
write : / 'Total of ', p_regno, ' is ', v_total. -
How to find out Which SAP programs are affecting Which Z programs?
Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
VishnuDo we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu -
Z search field in standard sap program
Hi,
I would like to ask if Z search field can be created in the standard SAP program.
Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
It shows the list of table tgsbt. But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
Is that possible, if so, could anyone give me a hint how to do that?
Many thanks,
HonzaHi Jan,
Please go thorugh the below link.
http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits -
How to uncomment code in Standard SAP Programs
Hi Experts,
how to uncomment entire code of standard SAP programs which is commented .
Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal.
i saw that some lines * / * like this are there in the commented code .
what is the way to un comment this ?
Thanks in advance,
Regards,
HituWell, if it is commented by your company - This doesnt ask for access key but if it is commented by SAP and you want to uncomment, you need access key.
You can ask basis guys to get access key for the object. you need to provide the program name and other information.
Other information: - go to the GOTO on application tool bar and select object direct entry.... you need to provide the full object key.
To uncomment the code - select the lines and right click - uncomment . This can only be done in editable mode. -
Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron -
How to call a Standard SAP Program in Zprogram.
Hi,
how to call a SAP Standard program in SAP Program?
Do we have to use any funtion module and pass paramters?
I want to call a Standard SAP prg in to my prgram? can anyone explain me or give the piece of code to call standard prg.
Thanks & RegardsAgain, ABAP related questions should be asked in the ABAP forum.
To answer you question, if the standard program is a report program, you can use the SUBMIT statement and pass parameters using the WITH Extention.
Submit <report>
with p_fld = 'X'
and return.
Please make sure to award points for helpful answers and mark your posts as solved when solved completely. Thanks.
Regards,
RIch Heilman
Maybe you are looking for
-
BASIS Parameter rdisp/max_wprun_time
Hi, Does anybody knows how the time limit given in the profile parameter rdisp/max_wprun_time work? I mean our parameter is set to 3600. What does that mean? Does it mean that it will kill dialog process at 3600 secs or 7200 secs? Today our syste
-
Hi there, I am using Dreamweaver Ultradev 4. Very old I know. I would like to set myself up for a database connection using php, mysql. I can't seem to find a compatible server model extension to set up my site. I have tried the one from Adobe but
-
Windows programs on new Intel Mac
Hi there, I have a 20" iMac G5 at home, a Macbook and now at work, I am thinking of getting a 20" iMac Intel. Now, I will need to run programs such as matlab and many other data/scientific programs at work - in windows mode. Everyone else runs things
-
I'm really curious, so far I've isolated it down to the HDD, I've tried Data Migration using firewire, and Target Disk mode. Anything would help.
-
Hi everybody; i have a problem about 9i oms job. i created a job succesfully. after it started, it status never changed, status to be left by started and my jobs not complate. how can i solve this problem?