SAP time for screen activities and transactions

Have a client with locations in all three US time zones as well as some European countries. Server resides in Oregon (Pacific time). A user in Europe will see the time as 9 hours earlier than it is in France. For example when it is 15:00 in France SAP shows the time as 06:00. Same issue in US but only 3 hours difference.
Client has performed a "re-direct" on the server so terminal services time does match the local time of the client but SAP appears to be looking at the time on the SAP database server.
This is causing some huge issues - anyone have a solution. Are there any plans to change this (if there is not already a solution)

Dear,
heck the below thread:
Server time Vs Client time
Time Zone Different between client users and SQL Server (Citrix EA 2.0)
Time Zone Differenz between users and SQL Server (Citrix)
Hope this will help you.
Thanks,
Neetu

Similar Messages

  • My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

    My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black.  Thanks!

    Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

  • An SAP Solution for capital planning and Budgeting of Capital Assets?

    Is there an SAP Solution for the Planning and Budgeting of Capital Assets?
    A solution that provides planning, budgeting, and tracking for capital assets through the entire life cycle of each asset, from the initial request through the final disposal.
    The solution needs to be able to run “scenarios.” A scenario contains equipment that may potentially be purchased. Scenario items are used to help determine cost, capacity, and cash flow feasibility.

    Hi
    What you suggested is the ideal approach...
    However, if they say that the budget allocated to capital purposes (70%) applies to both capital projects and expenses and they would like to control it together, but have reports separately, it is not possible with standard SAP...
    If they want to have just one IO for both cap and exp, You can suggest them a work around to capture CAPITAL or EXPENSE in a ref field (XREF1 in BSEG) and you can run KOB1 with XREF1 displayed in it....
    In standard KOB1, XREF1 is not displayed, you have to use Exit COOMEP01 to include the fields you want... Add XREF1 to the Structure CI_RKPOS and write your code in the include ZXKAEPU01 of EXIT_SAPLKAEP_001
    Without an identifier @ the time of booking the transaction in the system (Either by way of IO or a ref field), you wont be able to generate reports later on
    Regards
    Ajay M

  • HT1212 Every time i try to turn on my Ipad the only i can see the the date and time for a second and them the screem goes off again !

    I have an Ipad 2 /. Everytime a push the bottom to turn it in the screem shows the time for a second and the screem goes black again
    what can I do ??

    Are you sure it's charged?
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes

    My iphone 4 locked up for several hours. i then tried to reset by holding down the home button and power button at the same time for 10 seconds and then the home button for 10 seconds. it is now completely black. what do i do? couldnt restore it in iTunes. Has anyone had this problem? Help!

    Same thing happened to me today. I wasn't even using the phone for the past 6 hours and suddenly I can't connect to the internet, none of my internet apps would work - nothing. I tried to call AT&T from the iphone and it locked up - couldn't turn it off, change to the home screen - nada - brick.
    Did the Home/Power button thing and that worked but this I've only had this phone for about 4 weeks and it's locked up more times than my 3GS did the whole two years I had it! Ridiculous

  • Invalid times for dummy activities

    Hello Gurus,
    I have an integration model that is not activated and this concern the PO's & PR's. There is an error that has been identified in the queue that specifies: <b>"Invalid times for dummy activities".</b> I am not aware and not certain which is causing the System Failure with this kind of message since there is no mention of any material or PO/PR that is affecting the cancellation of the integration model. I would appreciate your assistance in the soonest possible time.
    Best Regards,
    Nap

    Hello Srinivas,
    Thanks for your assistance, the integration model that has problem was activated during the batch job run. No failure happend.
    But I will take the instruction you proposed.
    Thanks,
    Nap

  • Can I use my creative cloud account at the same time for my iMac and my MacBook?

    Can I use my creative cloud account at the same time for my iMac and my MacBook?

    Thank you Sheena!!
    Guy
    Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
    Can I use my creative cloud account at the same time for my iMac and my MacBook?
    created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
    Hi Guy Heyligen,
    Absolutely. You can use the creative cloud account on two machines.
    You may also refer to the link below:
    Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
    Regards,
    Sheena
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

  • 39L4363D - Unable to set padding time for recording start and end time

    Hello,
    I have a problem with my 39L4363DG tv (Software 7.1.90.34.01.1).
    I'm not able the set padding time for recording start and/or end time as described in the [manual|http://www.toshiba-om.net/LCD/PDF/English/L4363-323950-English.pdf] on page 51. Both menu item "start padding time" and "end padding time" are disabled?
    Can anyone help me and give me an advice on how to solve it?

    Hi
    The padding time can be set for programmed recording.
    There is also an scheduling priority
    If scheduled time slots are next to each other and there is more than one minute between the end time of the first schedule and the start time of the next schedule, programmed recording will be performed correctly.
    When +Start Padding Time+ and +End Padding Time+ are set, the start time and end time will be the time plus the additional minutes.
    If scheduling times overlap, priority will be given to the programmed recording which starts first.
    When the programmed recording that started first ends, recording will switch to the next scheduled programme.
    At this time, depending on how far the scheduling times overlap, the beginning section of the next scheduled programme may not be recorded.

  • TS2771 My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

    My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My ipod touch is stuck in connect to itunes screen. I've tried to press Power and Home button at the same time for 10 seconds and all it does is go to a black screen. Press power button again and the usb cable with an arrow towards an iTunes logo.

    I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Also reset the iPod.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • For count of times execution of program and transaction

    Hi all.
    IS there any report or transction which give us  number of count of any program and transaction execution?
    Please help me out.
    thanks
    chetan vishnoi

    Hi,
    When ever u execute ur report/Transaction u update a Ztable with the counter incrimented by 1.
    U can get the max counter value by the select statement.
    SELECT MAX( Counter ) INTO w_counter FROM ZCOUNTER.
    Make sure that u update the Ztable only at the end of ur code. Because your program may exit because of some errors in the middle.
    Hope u got my point:-)
    Thanks,
    Vinod.

  • How to use ale/idocs in sap crm to transfer master and transactional data

    hi all,
    I am working on sap crm7.0 ehp1. I want to transfer my master and transactional data from crm development system to crm quality system here through idocs. I am aware of basic ale settings and successfully transfe the ztable data through idocs. But i am not able to find any proper step by step procedure for maste and transactional data in sap crm. Also sap ecc tcode NACE is not available here.
    pls help..
    regards,
    kavita chaudhary

    Kavita,
    In CRM, Exchange Interface (XIF) ALE/IDOC is available to transfer master and transaction data. You can go through the following link for set up.
    Basic Data exchange set up for ALE IDocs - Wiki - SCN Wiki
    You can extend the standard XIF IDOCs using Transaction BDFg as well.
    Thanks,
    Ravi

  • ITunes Charged me 9 times for 1 purchase and Support has not resolved it

    iTunes charged me 9 times for a single transaction and I'm getting no where in getting it resolved.
    Nov 21, 2005: Purchased Season 2 of Lost (videos) for $13.93
    Nov 21-22 2005: Was charged over and over again, totaling 9 times for the single purchase
    Nov 23: 2005: Initial contact to iTunes support; they tell me this is normal that small charges may be applied to your account as 'authorization requests' Of course, these weren't normal or small charges it was billing error that charged me 9 times for a single purchase.
    After contacting them again to reiterate the fact that I was charged 9 times for the purchase, my mail is finally read and an acknowledgments is made that something went wrong. They tell me "We have investigated and resolved the issue you reported. Within 72 hours, you will receive a refund for the duplicate charges through your Paypal account, coming from the iTunes Music Store."
    Nov 29 2005: I wait patiently beyond 72 hours for all the refunds to be put in place; some are completed but 2 charges still show. One at the time is valid, its the purchase I made. ** (Not valid today because the music shows as not payed for anymore) **
    I contact Support on the 29th stating all of the refunds have not come in, they tell me there is nothing they can do and that I need to contact Paypal. "The best way to resolve this issue is to contact PayPal and advise them of the situation."
    I talk to a senior person at Paypal and they tell me there is nothing they can do, that iTunes must issue the refund. Nice. Circles!
    I write back again to iTunes Support stating that I had contact Paypal and they stated that there is nothing they can do regarding the refund, that Paypal needs to resolve the matter. iTunes writes back:
    "We're sorry that you have experienced this problem with your PayPal account. Unfortunately, we will not be able to notify you when the matter is resolved. Our engineers are trying to correct the errors, and we hope to enable PayPal payment processing as soon as possible. We appreciate your patience."
    OK, they at least acknowledge there is a problem (even if they are blaming it on Paypal) and that they are working on it.
    Dec 05 2005: Follow up today to get a status as to when I will be refunded for their error, I get no update, only the following response:
    "We apologize in the delays in processing this refund, and we thank you for your patience."
    I follow up stating I would like the full amount refunded; it seems the original purchase is listed as not payed for so I can't even watch what I purchased! At this point I just
    want to be refunded so I can cancel and delete my iTunes account.
    Whats bad:
    - Can't reject the charge on my cc since it will get rejected back to paypal, not iTunes/Apple (paypal will then likely just close my account and come after me for the money)
    - Can't reject charges in paypal, they don't seem to do that
    - iTunes/Apple support mails are incredibly canned responses and impersonal
    - I'm at the mercy of iTunes/Apple in resolving this; there is no ETA for them to resolve this issue that they created.
    - I've asked to be called regarding this matter and the requests have been ignored
    Any advice to get this resolved would be appreciated. It is has been an incredibly frustrating experience; I don't much like the idea being forced to pay off a credit card charge for services that I have not actually received and which were charged to me in error.
    Mac OS X (10.4.3)

    This is EXACTLY what happened to me and many others. Tech support returned most of my money but not all of it. Figure that one out! It is clear no music is downloaded (or in queue), it is clear an unknown error message is produced, and it is clear we, the consumer, are still being charged anyway. Will Apple require a credit card from its customers and alienate those that do not wish to use a credit card? Will Apple insult its customers and make silly suggestions such as 'Use an iTunes gift card' in much the same way a forum moderator has already recommended?
    I have an idea: Acknowledge the problem publicly (via email, for example) and fix it in a future update. Customers will be more understanding if they know there is a temporary problem and Apple is working hard to fix it. Oh, and return our money, please!
    Windows XP Pro
      Windows XP Pro  

  • SAP  workflow for purchase requisition and purchase  order

    Hello  Sap Workflow,
    Can you  please help me on  building workflow for purchase requisition and  purchase order    with  the necessary screen shots  ?
    your quick response  will be greatly appreciated.
    Thanks in Advance

    Hi,
    Please check http://help.sap.com .
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92761846f311d189470000e829fbbd/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/04/92775546f311d189470000e829fbbd/frameset.htm
    Configuration guides are available in SAP Solution Manager.
    Regards,
    Masa

  • SAP Scripts for Stock Removal and Stock Placement ?

    Hi All,
      Can you please let me know what are the SAP script names and Transaction codes for  Stock Removal and Stock Placements ?
    Thanks,
    Raj

    Hi
    Tcode is MIGO only (select Goods receipt) and mvt type as
    Putaway (305, 315, and so on)
    Stock removal (303, 313, and so on)
    Transfer posting (301, 311, and so on)
    regards
    Yogesh

Maybe you are looking for

  • Applying down payments bigger than invoice amount

    Hi there!! I want to control employee advances via the following procedure: Create a Control account in Asset named Employee Advance account Create BP group employee and create employee master in Business Partner master data as vendor, link the contr

  • Changing the specs of the site title: Can it be done?

    Is there a way to change the font type and or font size of the Site and Collection titles in the HTML website galleries that LightRoom can generate?

  • Startup plug is missing - Wht this means

    When i was building dc i was getting startup plug missing error.Can i know about this

  • How to grant access to all workbooks to a particular responsibility?

    Hi, I am new to Discoverer. i have installed OAS 10.1.2.3 and I have done EUL_SET up on my E-Business Suite R12 and now 'SYSADMIN' owns all the workbook under "System Administrator" responsibility. Now users want to see all workbooks. I need to provi

  • Watermark tool

    What (preferably free) watermark tool (for use with PE 5) do you recommend? Regards, Adriana. [ put out the rubbish if you need to reach me by e-mail ] www.spinsister.nl