SAP Versions for B1i

Hi all,
I tried to add new SAP versions (e.g. ERP2004, 2005) to the drop down list in landscape configurator in control center but they are not visible.
I added new modified xml files ( copies of R3.47.200.xml) to setup/com.sap.b1i.repository\SysType.xml folder and Patch folder too but nothing goes on.
I don't know, if it is important to change or add newer SAP Versions but I would like to do this because of better documentation.
Has anybody tried this successfully??
The workaround which is described in this posting: SAP Business One Integration Technology does not work for me.
Regards
Rayko

Hi all,
now it is official. I wrote an message to SAP support regarding this issue and the reply is the following:
sorry for the delay in getting back to you, I was double checking with t
he development department just to be sure of teh reply.
<b>Unfortunately ERP2004/2005 is not supported in the current release.</b>
It is very helpful to get information about inserting new entries in dropdown list of control center but they are for nothing because B1i does'nt support this SAP releases. Thanxx god I can connect to 4.6C ( which is out of maintenance) but not to the both newest releases of SAP ( ERP2004 comes up 3 years ago!!!)
Ok , 2 weeks of trying and working for nothing. It seems I have to wait nearly 2 or 3 years until our current SAP release is supported.
Thanxx Eddy for help. See you 2008
PS: on Cebit 2007 SAP sales team told me: of course ERP is supported!!

Similar Messages

SAP VERSION FOR ITS

WHICH VERSION OF SAP DOES ITS MOBILE IS EFFECTIVE.
WE ARE ON SAP R/3 4.7 VERSION GOING ON UPGRADE FOR ECC 6.0

Hi,
Check this link..
https://wiki.sdn.sap.com/wiki/display/HOME/ITSmobile
Regards,
Narendra.

Supported SAP Versions

Hallo
Is there an document were i could found the supported SAP Versions for Version XI 3.1?
In the supported platforms document i could not find something (https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000726096&_SCENARIO=01100035870000000202).
Is for example SAP Rel. 4.6.c supported?

hi,
you can go to http://service.sap.com/bosap-support and take a look at the supported platforms per product. In your case the product is the SAP Integration Kit.
Ingo

How can we create Versions for Products in SAP CRM

Hi All,
We want use Product Versions in our CRM IC Webclient. We want to be able to select a product and then have a list of versions to pick from. Can anyone tell me if they have configured Versions for Products in their SAP CRM system. If yes, then how did you go about it.
Thanks,
Ramesh Nallabelli

Hi Arup and Shanthala,
Thanks for the prompt responses. Appreciate your help. We want to create Product versions like this: Product: Windows OS Version: 95, 98, XP, Vista, 7, etc.
When I try to create a configurable product, using the Configuration tab, to create or use a product model I see an error message: PME installation with errors The long text is: The environment variable PME_HOME that includes the PME application has to exist locally in order to start the PME from CRM.
This indicates the configuration of IPC in our CRM system. This is something that we have not undertaken so far.
When I use the Poduct Variants tab to create a product variant for a configurable product, I can't edit here. This view opens in a display only mode. After reading some more about this, It looks like variant configuration needs to be used in tandem with ERP variant configuration. There might also be a need to recreate this in the Java configuration engine. We are going to create these products in CRM only, so this might not work for us.
Regards,
Ramesh

Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

Hi,
I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
Clients View
Cl. Name City Crcy
000 SAP AG Konzern Walldorf EUR
001 Auslieferungsmandant R11 Kundstadt USD
066 Test EarlyWatch Profiles Walldorf EUR
I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
Kindly help me.
Kannan

hi,
? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
? Then click on the Remote Logon then we go to BW server give RFC SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
? R/3 - B W - R/3
? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
? PC ?Flat file , DB ? Database
? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
hope it helps u
Ramesh

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

What is the Current ABAP Kernel version for SAP ERP 6 (ECC6)..?

Hi,
Login to http://service.sap.com/swdc using your S user-id
Serach for kernel
Check for your relevent kernel patch (unicode/non-unicode , NW release etc.)
Regards,
Rajneesh

SAP DEMO Database for SAP b1 Version for HANA

I was wondering if anyone can Help. I have installed the SBODEMO database on SAP B1 version for SAP Hana. V9.0 PL4 and then upgraded to PL9HF (901.00 to 902.001) the SBOCOMMON upgraded ok but SBODEMO database failed on the pre upgrade checks with "Parameter type error in stored procedure SBO_SP_TranasctionNotification and refers to Note 134078. I logged it with SAP and they have said uninstall the SBO DEMO database and then reinstall. Can anybody provide details on how to do this as there are no uninstaller just for the DEMO db as it was installed during the SAP B1 server installation.

Hi Nathan,
You can uninstall using uninstall.bin typically located in /opt/sap/SAPBusinessOne. If you deleted /opt/sap/SAPBusinessOne or the uninstall fails you can use the command shown below.
//Check for B1 rpm files
rpm -q -a | grep B1
//remove B1 rpm files
rpm -q -a | grep B1 | xargs rpm -e
After uninstalling I would recommend deleting the directory (rm -rf /opt/sap/SAPBusinessOne).
Best regards,
Duncan

"SAP Crystal Reports, developer version for Microsoft Visual Studio" (CRforVS_13_0_9.exe) has error during Installation.

Hello,
I just tried to install the new file CRforVS_13_0_9.exe on a Windows 7 Ultimate machine.
I have Visual Studio 2013 and wanted Crystal Reports to be fully integrated with it.
By the way, I had already uninstalled CRforVS_13_0_8.exe before I attempted the installation of CRforVS_13_0_9.exe.
However, the installation failed with the following error message...
"The installation failed prematurely." The error dialog box with a full error message is attached.
It may be significant to note that even after what looks like a failed installation, that "SAP Crystal Reports, version for Microsoft Visual Studio" (ver. 13.0.9.1312) does show up in the Programs and Features Control Panel).
Any help/advice would be greatly appreciated. Please advise.
Tom Davey

This used to be quite common on WIN XP and Vista and it was an MS issue. Googling I found the following that may help:
Fast and easy Windows Error Code 2753 resolution
Error 2753 Preventing Uninstall&#47;Reinstall - Microsoft Community
Windows Installer Error Messages (Windows)
For now, this is the only report of the error with SP 9, so it will be good to check if the above helps.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Component Version Dependencies of SAP EHP1 FOR SAP NW PI 7.3 & SAP EP 7.3

Hi,
Our Client is plannig to implement SAP EHP1 FOR SAP NW PI 7.3 & SAP Enterprise Portal 7.3.I have been asked to find out any component version dependencies or pre-requisites for these 2 SAP products.I am not getting it from anywhere.If anyone has any information please do reply me back.
Note : Currently there is no PI,EP system in our landscape.

Hi,
It will work with EHP5. We also have same systems in our landscape.
And I would suggest you to read the guide below
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50b765af-91a5-2e10-9692-d4764d024cb3?QuickLink=index&overridelayout=true
Thanks
Sunny

Linux version for SAP ECC 6.0

Dear all,
Please help me in finding the suitable Linux version for SAP ECC 6.0 version.
Thanks & Regards
Tavargeri Ganesh

SAP on Linux
--> Supported platforms
Markus

User Exits or BADIs for MM41/42 in SAP Version 4.6b

My requirment is that when the user create a new article by MM41 or changes an existing one by MM42. Certain checks shoud be applied.
Checks required are:-
1)Articles should always have their Unit of Dimension as MM(other dimensions should not be accepted )
2)Articles should always have the volume unit as CCM(other volume units should not be accepted )
3)EAN numbers should be present only for Alternative Unit of Measures EA and OUT.
4)     The dimensions (Length, Width and Height) should always be double digits (should be more than or equal to 10)
I want to know by which User Exit or BADI (in SAP Version 4.6.b) can this be achieved.
Its very URGENT..Please help.
Many Thanks
Abhi

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM41                     Create Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Transaction Code - MM42                     Change Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Rewards if useful.........
Minal

Where can I find windows trial version for SAP NetWeaver 7.0 (2004s)

Hi
Where can I find windows trial version for SAP NetWeaver 7.0 (2004s)?, I can only see Linux version. Any help is appreciated..
- Jai

Hi Jai,
For windows, you can download "SAP NetWeaver 7.01 SR1 SP3 ABAP Trial Version" and "SAP NetWeaver 7.01 - ABAP Trial Version ". Only 7.01 trial is available for download for Windows. 7.0 trial is only available for Linux.
These are available on the same page as the ones you've seen.
Thanks,
Shitij

BAPI for create material master (SAP version 40b)

Hi,
Anyone know BAPI for create material master for SAP version 40b?
There's no BAPI_MATERIAL_SAVEDATA.
I try to use BAPI_MATERIAL_MAINTAINDATA_RT,
but seems that BAPI only for retail.
Kindly advice!
Thanks,
Victor.

Hi,
    this one works pretty good.
call function 'MATERIAL_MAINTAIN_DARK'
         exporting
              sperrmodus                = ' '
              kz_prf                    = 'W'
              max_errors                = ' '
              p_kz_no_warn              = 'X'
              kz_verw                   = 'X'
              kz_aend                   = 'X'
              kz_dispo                  = 'X'
              kz_test                   = ' '
              flag_muss_pruefen         = ' '
              call_mode                 = 'ACT'
         importing
              number_errors_transaction = numerror
              matnr_last     = last_matnr
         tables
             amara_ueb      = i_mara    "Basic Data
            amakt_ueb      = i_makt    "Descriptions
             amarc_ueb      = i_marc    "Plant
            amard_ueb      = i_mard    "Storage Location
           AMFHM_UEB      = I_MFHM    "Production Tools
            amarm_ueb      = i_marm    "Units of Measure
           AMEA1_UEB      = I_MEA1    "Internal Mangagement - EANs
            ambew_ueb      = i_mbew    "Accounting/Costing
            asteu_ueb      = i_steu    "Tax Data
            astmm_ueb      = i_steumm "Tax Data
           AMLGN_UEB      = I_MLGN    "Warehouse Data
           AMLGT_UEB      = I_MLGT    "Storage Type Data
           AMPGD_UEB      = I_MPGD    "Change Documents
           AMPOP_UEB      = I_MPOP    "Forcast Parameters
           AMVEG_UEB      = I_MVEG    "Total Consumption Data
           AMVEU_UEB      = I_MVEU    "Unplanned Consumption Data
            amvke_ueb      = i_mvke    "Sales Data
            altx1_ueb      = i_ltx1    "Sales Text
           AMPRW_UEB      = I_MPRW    "Forcast Values
             amfieldres     = i_delfields
             amerrdat       = i_errors
         exceptions
              kstatus_empty             = 01
              tkstatus_empty            = 02
              t130m_error               = 03
              internal_error            = 04
              update_error              = 05
              too_many_errors           = 06.
Otherwise try BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
<b>Reward points</b>
Regards

Million+ views - SAP Crystal Reports, developer version for MS VS: Updates & Runtime Downloads

1,000,000! One million views in just over three years;
SAP Crystal Reports, developer version for Microsoft Visual Studio Updates & Runtime Downloads;

Re. runtime distribution limits; WIN apps, free. Web apps used internal to your organization, free. Web apps deployed external to your organization, extra licensing applies. Check with sales: 866-681-3435
Worldwide Office Locations | SAP
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

SAP Versions for B1i

Similar Messages

Maybe you are looking for