SAP DEMO Database for SAP b1 Version for HANA

I was wondering if anyone can Help. I have installed the SBODEMO database on SAP B1 version for SAP Hana. V9.0 PL4 and then upgraded to PL9HF (901.00 to 902.001) the SBOCOMMON upgraded ok but SBODEMO database failed on the pre upgrade checks with "Parameter type error in stored procedure SBO_SP_TranasctionNotification and refers to Note 134078. I logged it with SAP and they have said uninstall the SBO DEMO database and then reinstall. Can anybody provide details on how to do this as there are no uninstaller just for the DEMO db as it was installed during the SAP B1 server installation.

Hi Nathan,
You can uninstall using uninstall.bin typically located in /opt/sap/SAPBusinessOne. If you deleted /opt/sap/SAPBusinessOne or the uninstall fails you can use the command shown below.
//Check for B1 rpm files
rpm -q -a | grep B1
//remove B1 rpm files
rpm -q -a | grep B1 | xargs rpm -e
After uninstalling I would recommend deleting the directory (rm -rf  /opt/sap/SAPBusinessOne).
Best regards,
Duncan

Similar Messages

  • Regarding Invoice No 1003 in SAP Demo Database

    Hi
    In sap Demo Database SBODemo_US, for Invoice no 1003,
    for an item A00006 Price is given as 786.60. Choose Goto Menu and further choose Gross Profit, it displays the base price and Sales Price(770.87). How can the price be different at two places?
    If it is how it is calculated?
    Reply Soon
    Thanks
    Janakiraman

    Hi Janakiraman,
    unfortunately we don't have an upload storage here in the SDN. At this point we have two options:
    a) you could upload the screenshots to a website that provides storage and then you can paste the url to the screenshots here
    b) we can route this through our support channel. You can send a message to our support team in the <a href="http://service.sap.com/smb/sbo/support">SAP Business One Support Center</a> in our <a href="http://service.sap.com/smb/sbo">SAP PartnerEdge Portal</a>.
    Please use the method that works best for you.
    Thanks,
    Torsten

  • Installing SAP NW 7.01 ABAP Trial Version for dummies

    Hello sappers...
    Sorry if you thought this was a guide for dummies, though it could turn out to be if I get some help - I'm the dummy!
    Not wanting to be left out, I too have had a host of issues trying to install this, over several days now... it feels like bashing your head against a brickwall.  After staying up till 4am last night, then wiping my laptop and reinstalling Windows AGAIN to start from scratch this morning, and encountering the cranio-mural interface again, I feel like a crash test dummy!
    I am installing on a new installation of Windows Vista Home Basic, I have a gig of RAM and plenty of hard drive space.
    Forgive me if this is an ignorant question, but do I need to install the Loopback adaptor if I'm connected to the internet?  If it's to generate an IP address, surely my computer has one.  Note networking is not my strong point (though I'm an ok programmer - one project manager even gave me 4 out of 10!) - please be kind!  Anyway, I have tried with and without this on my various attempts.
    ANYWAY.... the sorry saga goes like this...
    I seem to be able to install Max DB OR SAP NW 7.01 ABAP Trial Version u2013> NSP, but not both at the same time - I may have done once, and it seemed to work once, I even managed to sign on - then it wouldnt work in the morning - but then that was on Windows XP Pro on my wife's laptop which only has 500 meg of RAM.
    My last attempt was fairly typical - Max DB is showing up in the program menu, but SAP NW 7.01 ABAP Trial Version u2013> NSP is not.
    However, I seem to have managed to start the NSP server ok, using SAP Management console, thanks to a handy tip on this forum about using your Windows OS password when it prompts for credentials.
    When I try to sign on I get 'partner 127.0.0.1:sapdp00 not reached WSAECONNREFUSED: Connection refused - error number 10061, return code -10, system call connect.
    That's one of my better attempts.
    Last night having deleted all the installed files from my C drive, uninstalled everything, tinkered with the registry to remove all relevant entries, I managed to run an installation that skipped out installing MaxDB (it was super quick!), yet did install the SAP NW 7.01 ABAP Trial Version u2013> NSP bits in my program menu - imagine my excitement at being able to start and stop the server, yet with no database it produced red windows on my screen saying 'sorry, you screwed up AGAIN' (or words to that effect).  Trying to sign on produced equally disheartening error messages...
    Am going to give it another try after taking a break, next time WITH loop back adaptor installed...
    Please pardon lack of relevant detail, I didnt note everything I did on every attempt - substituting humour for detail is all that's saving my sanity at this stage...
    Anyone that can help me achieve this will be my friend for ever... I'm a contractor bitten by the recession trying to learn some news skills.... the first one being how to install Netweaver at home...!
    Log text gives
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:08 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:18 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:28 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:38 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:48 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Mar 4, 2009 12:50:58 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:09 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Mar 4, 2009 12:51:11 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file C:\SAP\NSP\log.txt for details.
    (Mar 4, 2009 12:51:11 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

    ok, this is the log from my latest attempt...
    > Subprocess starts at 20090312182156
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182159
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182159
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182205
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182206
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182206
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -R C:\sapdb\NSP\db dbm_version
    Execute Session Command : exit
    > Subprocess stops at 20090312182209
    OK
    VERSION    = 7.7.06
    BUILD      = DBMServer 7.7.06   Build 007-123-197-046
    OS         = WIN32
    INSTROOT   = C:\sapdb\NSP\db
    LOGON      = True
    CODE       = UTF8
    SWAP       = full
    UNICODE    = YES
    INSTANCE   = (unknown)
    SYSNAME    = Windows
    MASKING    = YES
    REPLYTREATMENT = none,zlib,auto
    SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
    > Subprocess starts at 20090312182209
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182210
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC db_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182210
    OK
    NSP     C:\sapdb\NSP\db                             7.7.06.07     fast     offline
    NSP     C:\sapdb\NSP\db                             7.7.06.07     slow     offline
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182211
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC inst_enum
    Execute Session Command : exit
    > Subprocess stops at 20090312182211
    OK
    7.7.06.07    C:\sapdb\NSP\db
    > Subprocess starts at 20090312182212
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182213
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182213
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182214
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182214
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182228
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'
    > Subprocess starts at 20090312182303
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u control,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182304
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182304
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182305
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_state
    Execute Session Command : exit
    > Subprocess stops at 20090312182305
    OK
    State
    OFFLINE
    > Subprocess starts at 20090312182306
    Execute Command : C:\sapdb\programs\pgm\dbmcli.exe -n James-PC -d NSP -u CONTROL,******** db_online
    Execute Session Command : exit
    > Subprocess stops at 20090312182316
    > Subprocess call failed
    ERR
    -24988,ERR_SQL: SQL error
    -902,I/O error
    3,Database state: OFFLINE
    Internal errorcode, Error code 9050 "disk_not_accessible"
    20017,RestartFilesystem failed with 'I/O error'

  • When trying to download ipodreset utility for windows i get a message that says the installer is intended for 32-bit version for windows. what can i do next?

    when trying to download ipod reset utility for windows i get a message that the installer is intended for 32-bit version of windows. what can i do?

    I assume you have tried everything here?
    iPod: Cannot restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    It doesn't mention 1442, but the same troubleshooting applies.
    It wouldn't hurt to also try another available USB port on your machine and another sync cable if possible.
    Lastly, try restoring the iPod on another PC or Mac running iTunes.
    If you know of somebody with a PC running Windows XP still, ask them if you can download the reset utility and use it to reset the Shuffle.
    B-rock

  • SAP NetWeaver Application Server ABAP Trial Version for Linux

    Donde podría conseguir los paquetes de instalación del SAP NetWeaver Application Server ABAP Trial Versión para correrla en una Maquina Virtual con Linux.

    https://store.sap.com/sap/cpa/download/20/0000000218?tkt=6728195BC9A41D6FDC99371FC9BB49E9_20140521182535.4356890&sap-lan…

  • Restore SAP 2007B DataBase In SAP 2005B

    I am trying to restore a Company's Database which is created in SAP 2007B to SAP 2005B, it gives some error.Is it possible to restore a database from different version to different version?
    Regards
    Om

    you can't downgrade the version. It is impossible to do that.
    Rgds,

  • Need clarification for firmware & MPIO version for Oracle RAC

    Dear All,
    We have two-node Oracle RAC configuration 10gR2, Windos 2033 R2, 64-Bit OS using ASM and Oracle 11gR1 clusterware on HP Blades. The SAN storage is from IBM. We want to upgrade the firmware and MPIO version as per vendor recommendation.
    Is there any requirement for Oracle RAC to have specific version of firmware and MPIO? Is there any matrix available for this? Or is it like both nodes should be able to see same SAN storage (LUN) irrespective of version used?
    Thanks

    Please note that Oracle RAC doesnt have requirement any sepcific firm ware. If you upgrade the firmware, it should not break any existing config, so pls check with IBM.
    Also if you are doing any specific firmware upgrade then IBM should provide the supported version list.
    Hope this help,
    Regards
    Satishbabu Gunukula
    http://www.oracleracexpert.com

  • Error while installing Netweaver 04s sneak preview trial version for java

    Hi Experts,
    I am trying to install SAP netweaver 04s sneak preview trial version for Java in my own desktop.  While installing, it is showing the following error
    ERROR
    CJS-30129  Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
    abcd\sapmnt\ with type DIRECTORY: can't create parent node..
    ERROR
    CJS-30129  Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:Unable to create node
    abcd\sapmnt\ with type DIRECTORY: can't create parent node..
    ERROR
    FCO-00011  The step createSystemDirectories with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
    I gave the database host name as the name of the computer.  While installing the 3rd step, the above error is displaying.  can anyone guide me how to proceed further.
    regards,
    vv

    how are u trying to install it.....i mean...are the source and the installtion drive on the same PC?

  • SAP Netweaver 7.01 Abap Trial Version - Flight Model

    Hello everyone, Iu2019ve installed SAP Netweaver 7.01 Abap Trial Version for practicing purpose.
    Iu2019ve the handbooks of the course version 63 (Year 2008). It uses the structure type BC400_S_FLIGHT and the class CL_BC400_FLIGHTMODEL among others but they arenu2019t included.
    How could I get them? And install them.
    Thanks for any help.
    Greetings.

    Hi Angel,
    It might be reason the course version 63 will not included in the trail version of SAP Netweaver 7.01 Abap.
    In trial versions not all components available..Please refer to below documents
    Web Dynpro for ABAP
    Web Dynpro for ABAP: Tutorials for Beginners [original link is broken]
    Also search at google "saptechnical for web dynpro for ABAP"
    Hope it helps
    Regards
    Arun

  • Adobe Flash CS3 trial version for Mac

    At the end of Part 1: "Building a banner" tutorail from
    "Using Flash for the first time", "Testing your progress" doesn't
    work : a message tells thet the name is too long, whereas this name
    is "anner.fla", or the destination folder is locked, it's not the
    case.

    Yeap, as Steve says...
    Your best bet, if you really want to run the current trial
    version on
    your IntelMac, is to load BootCamp or Parallels and install
    (!) Windows
    on your Mac, which will then likely allow you to run
    Authorware in it's
    required Windows environment on your Mac.
    Erik
    bob0172 wrote:
    > isnt there a trial version of authoware for Mac osx??
    why is that?? Why should Adobe exclude us? Im a student and im in
    desparate need for a trial version for mac osx (intell) :(
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/group/macromedia.authorware

  • Trial version for mac please,, dont exclude us

    isnt there a trial version of authoware for Mac osx?? why is
    that?? Why should Adobe exclude us? Im a student and im in
    desparate need for a trial version for mac osx (intell) :(

    Yeap, as Steve says...
    Your best bet, if you really want to run the current trial
    version on
    your IntelMac, is to load BootCamp or Parallels and install
    (!) Windows
    on your Mac, which will then likely allow you to run
    Authorware in it's
    required Windows environment on your Mac.
    Erik
    bob0172 wrote:
    > isnt there a trial version of authoware for Mac osx??
    why is that?? Why should Adobe exclude us? Im a student and im in
    desparate need for a trial version for mac osx (intell) :(
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.adobe.com/communities/experts/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/group/macromedia.authorware

  • 2007B demo database in 2007A

    Hi experts,
                   I have downloaded the Localized Demo Databases for SAP Business One 2007 B for Countries like Singapore & India. I would like to know whether i can use those demo database in SAP Business One 2007 A.
    thanks
    L.Manickam

    You can download the demo database of 2007B from this link
    [India Localization|https://websmp209.sap-ag.de/~sapidb/011000358700000189362008E.zip]
    [Singapore Localization|https://websmp209.sap-ag.de/~sapidb/011000358700000189382008E.zip]

  • License Key For SAP R/3 Enterprise Demo Version

    Hello Basis Gurus,
    I have installed SAP R/3 Enterprise Demo Version in my Notebook.
    When i am trying to login using User ID: SAPUSER getting an error message that ":Logon refused (valid license not installed)"
    SAP R/3 Details:
    Component Version: SAP R/3 Enterprise
    Installation Number: INITIAL
    License expiration: ..----
    Active Hardware Key: C1129820057
    System Number: System No. Empty
    When i am trying to install the License Key at Command Prompt getting the error message that
    Specify your license key:
    LICENSE_KEY   1...5....0....5....0...4
    LICENSE_KEY =
    Wrong license data specified
    >        Check the specified license data for:
    >        - typing errors
    >        - upper / lower characters
    >        - same values as noted on license fax
    How can i get the correct LICENSE_KEY for this demo version for the above hard ware key.
    Please advice urgently..

    to get hardware key:
    saplicense -get
    to get license key:
    https://websmp106.sap-ag.de/licensekeys

  • SAP Server  demo version for development?????

    Hi,
    Is there any version of SAP R/3 server for application development?
    I develop my external application in Java in Eclipse environment (I use basically Material Management module), but I am using server from my university which is currently unavailable. I need access to server asap and therefore I wonder whether there is any version for development.
    Any helpful answer will be properly rewarded.
    BR,
    Rafal

    Hi,
    Firstly, thanks for an answer. Points will be rewarded later on.
    I understand all these legal issues. Please explain me what means "technology basis release"? I mean, what does it include? Basically I use only a few BAPIs and function modules related to MM module and that's all what I really need. I list them below:
    CALO_INIT_API
    CSAP_MAT_BOM_CREATE
    BAPI_MATERIAL_BOM_GROUP_CREATE
    CSAP_MAT_BOM_READ
    BAPI_MATERIAL_EXISTENCECHECK
    BAPI_MATERIAL_GETLIST
    BAPI_MATERIAL_GET_DATAIL
    BAPI_MATERIAL_SAVEDATA
    Do you know whether they are available within so called "technology basis release"? Perhaps it is stupid question, but I'm still new in SAP.
    I've got to mention that I sent an email describing my problem to SAP. They've answered that I'm supposed to visit http://sdn.sap.com and there I can get a demo version. I still can't find it (perhaps I'm blind , or more probably names in download section are not so self-evident).
    Looking forward any response.
    BR,
    Rafal

  • Logical system for client 001 for SAP NETWEAVER ABAP TRIAL VERSION for BI

    Hi,
    I have installed SAP NETWEAVER ABAP TRIAL VERSION for BI. In that I have to create logical system for client 001. I have taken a list of available clients from the abap R3 side. Here is a list of it.
    Clients View
    Cl. Name City Crcy
    000 SAP AG Konzern Walldorf EUR
    001 Auslieferungsmandant R11 Kundstadt USD
    066 Test EarlyWatch Profiles Walldorf EUR
    I cannot get inside the BW side for it asks me to create a logical system for client 001. What to do?
    Kindly help me.
    Kannan

    hi,
    ? First log on to SAP R/3 server connections Go to SCC4 in R/3 & in Scc4 BW server. A screen opens in that logical name of the system would be opened in both (R/3 & BW).
    ? Take notepad in it save .R/3 & BW logical names go to R/3 & click SM59 to create R/3 connections click then a screen opens gives BW logical name in RFC Destination option & give connection. type 3 & give some description & then press enter.
    ? You will get another screen under it then at target host gives BW server name we will get it from BW logon change ID, IP address option & give the system no. The system no go to logon pad just drag it then you will see the name.
    ? Then click on log on securities go to log on give BW server details like No, client user Password. Then save it then click test connection tab if there are errors then it gives yellow color if they are no error the whole thing come as white.
    ? Then click on the Remote Logon then we go to BW server give RFC – SM59 & click create. Then give the server name which is at the bottom right corner give it then give the no, name, password in logon Security save it & test connection & then remote logon.
    ? R/3 - B W - R/3
    ? Logical connection source system connection is used to transfer the data from R/3 to BW. Go to BW system& click RSA1 go to source system option go to top to the source systems right click on it. Then click create then a screens opens then.
    ? PC ?Flat file , DB ? Database
    ? Select the option manual then a screen appears RFC Destination, Logical source name then click OK then it goes to opens other screen save it test connection then remote login then it go back to the then a screen opens then click only activate.
    ? BW ? RS1 ? SOURCE SYSTEM ? CREATE MANUAL AUTOMATIC CELL
    ? R/3 ? Test connections login ? back ? replicate method ? active data R/3 Source system you will able to.
    hope it helps u
    Ramesh

Maybe you are looking for

  • Changing the strategy when stocks exist

    Dear Gurus, Few of our FG (FERT)materials were handled as MTO materials and was using strategy 20, now the business case has changed for some of these materials and we want to change the material strategy to 40, These FG's have stock reserved against

  • New iTunes ID no longer allows sync with old ID

    I have an iTunes account that I have purchased a lot of media (music, movies, audio books, apps...). I had to change my iTunes ID several months ago and now whenever I try to sync it tells me that I'm no longer authorized for this media and it puts u

  • Role Validity date

    Hi Guys, I have a role assigned to a user with a validity date (say 01/20/10 to 04/20/10). However after the expiry date the user is able to perform actions related to that role. I do have PFUD scheduled which runs every day. I understand that prgn_c

  • Centralized WLC Design Question

    Dears, In my scenario, i am designing CEntralized WLC deployment. I have 30 AP in Buidling X(200 Users) and 20 AP in Buidling Y(150 Users). I am planning to install HA WLC CLuster where Pimary & Secondary WLC will reside in physically different Data

  • Can't create 4/3 ratio movies anymore!

    Am I missing something? It appears that this new iMovie (v10) forces you to create widescreen only projects. Gone is the 4/3 option (alongside with the number of frames per second) I have tons of home movies transfered from tapes (I am sure plenty of