SAPConnect resending email messages after error

Hello all.
I have configured SAPConnect to email sending. We have one SMTP node with a default mail host. I wish to send a email messages on other SMTP host when default host is inaccessible.  Is there any standart scenario?

Hello,
I used to think you would normally have only one node. If you managed to configure two nodes, the config will still work.
Because sending action is triggered by the RSCONN01 background job that works based on the type of Address i.e. that is based on internet address, fax adress etc.
So, it shouldn't matter.
Regards,
Siddhesh

Similar Messages

  • I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?

    I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect.  My Safari keeps kicking out and giving me error message after error message and my computer is really slow.   How do I resolve?   Can I uninstall this ?   I had to re-connect my iMovie t

    USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
    OWC have a few different ones for sale.
    http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
    Do you also connect the external USB drive to the AC power as well while you use it ?
    Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
    Stewie
    Message was edited by: stewiesno1

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • TS3899 Why can't I send email messages after 7.1?

    Why can't I send email messages after 7.1?

    Hi Honeylev,
    Welcome to the Support Communities!
    The article below will walk you through the troubleshooting steps for email on your iPhone:
    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    I hope this information helps ....
    Have a great day!
    - Judy

  • Email Trigger after error

    Hi,
    I created an abap program to calculate the size of a file and raise an error if it was not within a certain threshold size.  I use the program in a process chain and upon an error, I have it send an email.  The problem is, that the email is only sent when I check the log to see how the process chain ended, it comes out with the dialog, "Status Change of Process ABAP1 ZD_FILE_SIZE_CHK, Save Status and Trigger Events if Appropriate".  Only if I say Yes to that message, does it send the email.  I want it to automatically send it without me having to check the log.
    Is that possible?  By the way, I had to create my own Process Chain type for an ABAP program because the original ABAP Program process chain did not have a success or fail completion statuses, it only had a completion status.
    Thanks,

    Ok, this is what I did:
    1.  Create your process chain.
    2.  Right-click the process in the chain you want to have en email message sent for, and select Create Message.
    3.  A pop-up will appear asking you to create a message for either errors, successes, or always (This depends on the process type, if you want an ABAP program to send messages on errors, you need to create a new process type which mimics the standard ABAP process type)
          - To create a new process type, go to Settings->Maintain Process Types.
          - This screen looks similar to the Variables maintenance in 2.X versions.  You can click on New Entries to create a new one, OR copy an existing one and modify it.  If you're creating an ABAP process type for errors and successes, please use copy.
          - Once on the process type information screen, go to possible events, and change it to: Process ends "successful" or "incorrect".
          - Save it.
          - You can now see the new process type on your left side in your process type tab.
    4.  Once you select either success, error, or always, it will bring you to the documents screen.
    5.  Fill in the name and description fields.
    6.  You can tell it to who this message will go to by clicking on manage recipients list.
    7.  You can edit the message going to these recipients by clicking on edit document.
    8.  After you have done all you needed, save it.
    9.  Now you have to go into RSPCM so that a job is scheduled to check the logs of this process chain and will automatically let it know to continue with the after-events when your program dumps (THIS IS ONLY NECESSARY IF YOU HAVE AN ABAP PROGRAM WHICH RAISES AN EXCEPTION, CAUSING AN ABAP DUMP).  The other process chain types should be able to send an email message even upon error, but this is only my guess, I have only tried it with ABAP program errors/dumps.
         - Once you go to RSPCM, You need to add your process chain to it's log monitoring list.  Click on the blank page icon.
         - Select your process chain.
         - Click on the Job Icon in green to schedule this job.
         - Set it run every 5-10 minutes, or at whatever schedule you wish, depending on when you are expecting your process chain to dump.  So that it checks the logs and continues to process the chain and the email.
    This is what I did on my side, if you have anything to add, or maybe an easier way to do this, please post it here.  Thanks,

  • Custom Email Message after HR Batch Run

    Is there a way to customize the email message body for batches that are setup to email report output after processing? I know you can put what you'd like in the Subject line but I would like to put a whatever I want in the actual email body.
    Any help with this is greatly appreciated.

    Is the e-mail send in an event script or a custom script. I had issues where the custom script would work, but the event script would not ( i think it may have been because the custom script runs under the FDM user id whilst the event script runs under the windows service id. (Might be wrong, but i think that was the issue) 

  • Cannot Delete Email Messages after Update

    After installing the newest OS update I cannot delete my email messages using the delete keyboard button or using the onscreen options.  The delete screen does open up but the delete option is greyed out.  I am able to delete messages by using select more and then delete.
    Solved!
    Go to Solution.

    I have the same problem affecting 3 different email accounts on my q10, one of which is a corporate account requiring IT support to reinstall. This solution is not practical for me. Any better ideas? I knew I shouldn't have done the upgrade. Another reason to regret not switching to an iPhone!

  • Users report no email messages after migration from Lion Server to a clean Mavericks Server with Migration Assistant

    We have a Mac Mini server running Lion Server.
    We bought a new Mac Mini server and installed OS X Mavericks and the Server app onto it.
    We then ran Migration Asssitance on the Mavericks machine and migrated from the Lion server in target disk mode.
    The migration seemed to run OK and all the user accounts seem to be working, however users are reporting that there are no email messages in their mailboxes.
    Confirmed this behaviour by adding their accounts to mail (via IMAP) on a separate laptop.
    Did we miss something? Is there an extra step to move the email service data?
    Any insights would be grately appreciated.
    Many thanks, Tom.

    Hey tomgallagher!
    You can use this article to help you troubleshoot the functionality of these Mail accounts if they are not functioning properly:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    If your saved emails did not come across properly in the Migration, you can always export the mail from the old computer and import it into the new computer manually:
    Lion Mail: Export mailboxes
    http://support.apple.com/kb/PH4811
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Error opening link to file from email message - Redirect Error

    Here is on example of this problem:
    I get an e-mail message with text with some links, when a click the text the browser opens and displays this message: Redirect Error
    On the PlayBook, I copied the hyper link from the text on the e-mail message and pasted it on a word document and this was the result:
    http://click.herbalifemail.com/?ju�2a16767364067b7c1575&ls�f911767765007b77157977&m�fa1676716306&l�9915787567057475&s�fe16707266027474157377&jb�cf14&t=
    Reading the same e-mail massage on my desktop PC I did the same thing and this was the result:
    http://click.herbalifemail.com/?ju=fe2a16767364067b7c1575&ls=fdf911767765007b77157977&m=fefa16767163...=
    On my desktop there is no problem and I’m redirected to the file but something is happening when a click that same link from de Playbook native mail.
    Thank you for your help.

    They appear to be different links. But I was able to open the pdf file. I was not able to understand it because it is not my native language but it was from herbalist.
    Be a Shepard and not an iSheep.

  • How can i leave a copy of email message after receiving it on outlook, how can i leave a copy of email message after receiving it on outlook

    i have a problem that i cant save email message on both my iphone and on outlook on pc

    So even though he can see everything he's ever gotten in All Mail, he still wants in in Inbox?  I realize the how to do it is a little bit of a stumper and it shouldn't be so difficult... but honestly, I think the more relevant question would be Why? Why would anyone in their right mind want to do that?
    How does his Blackberry currently access his Gmail account? It should be a simple matter to duplicate the settings. It's undoubtedly just using POP and not deleting the originals as they are downloaded.
    Here's what's going to happen if that's the case. The very first time he sets up a new device... phone, pc, doesn't matter, to use POP, it's going to download every e-mail he's ever gotten unless he goes in and tells Gmail otherwise.

  • Lost email messages after rebuild

    This all started when I was trying to help my friend setup a rule for moving messages to and from specific people to a specific folder. Worked all well, but for some reason bunches of old messages started showing the "not downloaded from server" error. So, per Apple and this discussion boards advice I "rebuilt" all of the mailboxes. This fixed the not downloaded issue, but any messages older than one week are now missing from the inbox and sent mail folders. I tried all of the advised techniques...reran rebuild and deleted envelope index file and imported mailboxes...nothing worked. I tried looking at the .emlx files as well and there aren't any older than one week in the inbox or sentbox folders. My friend is (justifiably) freaking out. Any NEW advice? I was thinking of running DataRescue or DiskWarrior to see if I could recover and deleted or missing .emlx files.
    System is a PowerMac G5 1.8ghz, Mac OS 10.4.10, Mail 2.1. Also, none of the mailboxes is even close to approaching mails MB limits. Email account is a POP account and has been setup for at least a few years.
    Any help is greatly appreciated.
    Message was edited by: pixelnyc
    Message was edited by: pixelnyc

    Have you tried searching for the missing messages in Spotlight (not in Mail)?
    If the .emlx files aren’t there, rebuilding mailboxes or re-creating the index isn’t going to make them reappear. If the messages are not on the server either and you don’t have a backup, you may want to try to salvage as many deleted .emlx files as possible with a data recovery tool such as Data Rescue II or FileSalvage. Of these, the only one I know for sure that can currently recover deleted .emlx files is FileSalvage. Stop using the computer right now if you want to try that, as anything you do with it may cause the deleted files to be overwritten.

  • Resend cancelled messages with errors

    Hi! I cancelled some messages then i need to resend them. however it show an error: "Unable to schedule n of n messages for processing; update the status". what are the steps to resend them back?
    Thanks!

    Hi Ronald - If the messages are cancelled, you should get them republished from source..
    have a look at the below thread -
    How to resend Message from RWB With status "Canceled with Errors"
    If you can download the payload, may be you send it from RWB..
    modified...

  • Automatically Cancel Message after error detected in Mapping

    Hello experts,
    I have a message mapping that does some validation on data from sender (file) and if not valid, the mapping errors out as I generate an alert. Production support then manually cancels the message from SXMB_MONI.
    My question is: Is there a way to cancel the message automatically as soon as the alert is generated instead of the additional manual step for Production support personnel to do it.
    Thanks
    JB

    Hi,
    >any person looking at this thread would have expected you to respond to the issue/problem discussed,
    in case you didn't notice I gave you the best answer I got - "it's not possible in standard" - short, maybe sad but true - all the rest is development
    which is possible and you can do EVERYTHING with it as you may or may not know
    >speculate on which name or nickname appeared on it
    don't know if you noticed but in case you didn't I'm a moderator of this forum
    so I try to keep it both: 1) clean and 2) healthy which means:
    1) if there is someone who's is affraid to tell his own name it means two things for me:
    a) either he/she was blocked on forums and come back with a different name
    b) is so highly valued prof (in his mind) that wishes not to show his real name
    as others might find out that he/she does not know something
    in both cases I'm always very carefull with such forum members
    (only as a moderator) as I cannot expect anything good from it
    which is actually true in your case as you don't expect our forum
    *rules of engagement * for example:
    Step 4: Thank Others by Giving Points
    and you never gave points .... none of your
    34 questions was ever awarded by you with even one point
    so who is playing fair ?
    2)
    if someone who has a funny nick cannot understand a little joke
    then I honestly don't care and it has nothing to do with my arrogance
    >your response shows your prejudiced approach and a sense of arrogance.
    please, let other people who read this judge on that, ok?
    and let's not continue this anymore
    anyway good luck in your attitudes too
    Regards,
    Michal Krawczyk

  • I cannot open email messages after downloading latest version

    I cannot open received email. It appears in the inbox, but it WILL NOT OPEN. When I switch to Safari, it will open, but I prefer the features of Firefox. This has been happening since I installed the second to the last update. I installed the latest update today hoping that would solve the problem, but it has not. HELP!!

    Enter the correct login credentials for the account.

  • TS4002 I cannot access my iCloud email messages before a certain date

    I can only acess my received email messages after April of this year - the rest won't load whether on my Mail desktop or via logging into iCloud on the internet.
    Does anyone know why this is and how to access my previous messages - I could access messages going back that much further, I have not changed my settins nor deleted the messages.
    PLEASE can some help - I desperately need to get hold of some of the email which I cannot access.
    Thankyou!

    At least I know I'm not alone.  I'm in the UK, five hours ahead of EST and that is about when it started.

Maybe you are looking for