SAPscript printer resident signatures HEX TYPE PCL - TROY

Can anyone provide an example or explain how to get printer resident signature(s) to print in the correct location on the form? I've tried converting positioning commands to HEX with no success in the SAP script command application.
Below is example of positioning commands and the associated hex conversion that I tried to use:
position(<esc>*p3000x1950):1B2A70333030307831393530
Without the positioning command, the signatures do not print on the check in the correct position even though the HEX command is placed in a window that is positioned appropriately.
Current SAPscript coding without positioning:
/*   select image:1B450D0A1B28323032511B287330703268373276307330623230325420
/*   char set(abcdef):616263646566
/:   HEX TYPE PCL
/=   1B450D0A1B28323032511B287330703268373276307330623230325420616263646566
/:   ENDHEX
Thanks,
Mary Lins

Thanks for the link. I have seen that thread but it does not address the issue that I am having which is the position of the signature. The signature is printing but not in the correct position on the paper. Also, a form feed appears to be invoked now which moves every other field on the paper to an inappropriate page and/or spot.
Does anyone have experience with the positioning and/or form feed associated with using HEX TYPE PCL in SAPscript?

Similar Messages

How to print a signature in Adobe form using PCL - HELP!

Hello,
I'm using Adobe LiveCycle and I'm trying to get my form to print a signature at the bottom right on the given signature line. Our HP LaserJet printer has a SIMM installed which contains the signature in digitized form. I need to issue a hexadecimal instruction using PCL which contains the code that tells the printer to print the stored signature. I know this is doable in SAPscript, but is it doable in Adobe???
Thank you,
Eileen

Hi Eileen,
I think it is handled differently in Adobe forms as here all the print data is created by ADS.
See the document Digital Signature Setup at:
www.service.sap.com/hrin -> Media Center -> Key Documents
This decribes the process.
The link below and SAP Note 1168740 also contain information.
http://help.sap.com/saphelp_nw70/helpdata/EN/46/1ca382f3ec5873e10000000a11466f/frameset.htm
Regards,
Aidan

Print Check Signature from Printer Flash Card

Dear all,
I need to print the signature from the Flash Card on the printer. They won't allow me to upload graphic into SAP system because of security reason.
How can I find an escape sequence and a character sequence for a print control from HP printer (4350tn)?
And please provide me an example of SAPscript code to print the signature.
Thanks very much,
Chaiphon Pulnitiporn

First you will have to fin the correct sequence of characters which, when send to printer, print the signature.
Then call transaction SPAD Spool Administration) to display Spool Administration: Initial Screen. Then click the Full Administration button. Select the Device Types tab and select the printer that will be printing the signature (HPLJ4, for example).
Select the green check mark after entry of the Device Type to display the Spool Administration: Device Type screen, then click on the Print Controls tab.
The Print Controls page displays a list of defined print control sequences, each identified by a name. You can create new sequences or modify existing sequences. Let's create a control sequence named <your instruction here> to define the prefix that will print the signature:
- Escape Code (hex 1B) usually at the beggining
- The code for printing the signature
- An upper case X to mark the end of the command (hex 58) usually
So by calling the new instruction you will print the signature:
- simple ABAP - <i>PRINT-CONTROL FUNCTION `<your instruction here>'</i>
-SAPSCRIPT : <i>/: PRINT-CONTROL <your instruction here></i>
If you have many signatures, maybe there will a part variable, so you will need two instructions : before and after to use before and after the id of the signature.
If all printer of the same type don't have flash cards, you have to duplicate the device type and update the copy, then assign the new type to the correct printers.
Regards

SAPscript printing (Works Fine in Preview, Disappear in Print Out)

Dear Guru,
i have a problem in SAPscript printing, especially i use ULINE(90) inside forms, it's works fine in Preview, but when i print it out after 89 of ULINE showed, it's show blank area and the 90th uline appear in next line.
any expert in this area can tell me what happen?
thanks.
Howard

Hi Howard,
this is printer problem.
Appart from regular settings we have left margin and right margin settings for printer.
If you rememmber we can do this setting if we print MS WORD document.
There is no setting available in SAP.
So solution is to increase right margin on your laout and try to fit your contents in same.
The preview is dependening on device type in SAP so u get previeew right.
Hope this will help.
Thanks,
Dhiraj.

Print Digital Signature

Hi Experts,
I've setup the digital signature for certain document types. Now when I print those signed document, am not able to get the approver's signature on print out.
From the SAP Help I found below link and it says that I've setup ' allowed' or 'possible' option for Document Display in Digital Signature Strategy.
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/45/f0f4a900b404abe10000000a114a6b/content.htm
I tried both the options and still not able to see digital signature during the print out or document display.
In the Help (above link) it also says that
"The document display and print option are not available to the signee if the forbidden option is set in the system table for the entire application."
Where can I find the System Table to remove the forbidden entry for the application?
Do I need to setup anything else to enable the digital signature print option?
Thanks,
Shaun

Hi Amit,
I am not sure on how to get the the signature of the person who released the PO, because as per my understanding the Relase Strategy i.e the Relase code is attached to a Basis profile.
What I would suggest is if you can get all the guys who can release a PO and define him as a Purchaser ie. a Purchasing group then it would be easier to print his signature in the PO.
Here are the Highlevel steps
1. Just have the Signature you want to print in a Tiff format.
2. You can upload the signature as a standard Text using program RSTXLDMC to upload and give a text name.
3. call the text name in your sap scripts.
reward if useful.
Thx,
MJ

Sapscript printing only the last value

Hello,
Im currently coding subroutine for medruck.. My problem is sapscript is only printing the last value of the item for all items.. For example:
Item # 1    10 pcs 10,000.00
Item # 2     5 pcs   10,000.00
Item # 3     5 Pad 10,000.00
where actually the value of item 1 and item 2 is not 10,000.. sapscript prints only the price of item # 3 for the first two items.. here is my code..
TABLES: konv, ekko, ekpo.
DATA: BEGIN OF tab OCCURS 0,
      brtwr LIKE ekpo-brtwr,
      ebelp LIKE konv-kposn,
      ebeln LIKE ekko-ebeln,
      knumv LIKE ekko-knumv,
      kbetr LIKE konv-kwert,
END OF tab.
DATA: sum TYPE p DECIMALS 2, gross TYPE p DECIMALS 2, val(16) TYPE c, d_knumv LIKE ekko-knumv, tab1 LIKE tab, val1(20) TYPE c,
        ext TYPE p DECIMALS 2, val2(20) TYPE c, extend TYPE p DECIMALS 2.
REFRESH: tab.
READ TABLE in_tab INDEX 1.
CHECK sy-subrc = 0.
SELECT brtwr ebelp ebeln FROM ekpo INTO TABLE tab WHERE ebeln = in_tab-value.
LOOP AT tab.
    AT NEW ebelp.
      tab-kbetr = 0.
      ext = 0.
    ENDAT.
    SELECT SINGLE knumv FROM ekko INTO tab-knumv WHERE ebeln = tab-ebeln.
    SELECT SINGLE kbetr FROM konv INTO tab-kbetr WHERE knumv = tab-knumv AND kposn = tab-ebelp                                AND kschl = 'ZDEL'.
    ext = tab-brtwr + tab-kbetr.
    AT END OF ebelp.
      READ TABLE out_tab INDEX 1.
      WRITE ext TO val.
      out_tab-value = val.
      MODIFY out_tab INDEX 1.
    ENDAT.
    CLEAR: tab.
ENDLOOP.
i used this code using abap only and it work. there seems to be a problem in sapscript.. Thank u for the help guys..
Thanks,
JP

put ur write_form with in loop...
loop at itab.
write_form..
      element = 'ddd'
endloop.
in script check ...
check wheather element is specified there r not
/e ddd.
     &itab-   & &itab- &

Trouble printing digital signatures

I have a windows 7 computer with a new printer. I have adobe reader 9 installed on the computer. I can see a digital signature on the screen even in the print preview, but it will not print. I can print the signature from a computer running XP! Any ideas how to fix this? Thank you!

I am using reader version 9.3.4 218. Windows 7 premium home edition 64 bit. Computer is an HP and printer is a brother mfc all in one laser. I tried to upload the document but it stated "the content type of this image is not allowed". I am unsure how the document was created, or how the signature was created it came to my gmail from an outside source. Also, this happens on most of the digital signatures that I receive, not just this one.
Thank you! -Cheryl

Custom SAPScript printing...

Hi,
I am working on a custom SAPscript form called shop floor traveller form.
Now this form impacts three transaction table since viz : CO04, CO05, CO02.
Since here three transactions are getting impacted I don't have the option of using exsiting standard SAP Script, modify it and register to standard print(driver) program.
I have to develop custom driver program as well as custom SAPScript from scratch in this case.
Now I am wondering if I have to make a custom transaction to print this SAPScript or is there some other solution for it ?
Tushar.

No, you develop your custom driver program and your custom SAPscript form. Then in configuration, transaction SPRO, you assign the custom driver program and the custom SAPscript form to the output type that you are using. I don't know that path in the IMG where you do this off the top of my head, your functional people should know where to go. In your custom program, you must make sure that you are doing the same IMPORT statement that the standard SAP driver program is doing, this is how the data is being passed. Just look at the standard program, and copy the IMPORT statement into your custom program. After that, you can do what ever you want.
Regards,
Rich Heilman

After Window Crash & Restore Articles in Firefox print in small 4pt type reather than the normal 10pt-11pt type

With Internet Explorer web articles print in normal size type 10pt - 11pt. With Firefox web articles print in small 2pt-4pt type. This started after a Windows crash & restore.

The Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   After that I could Not install any rpm from rpm or yum command.
   I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
    got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
   with yum am getting this error
   error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
   Could you tell something which i could try & may be that works.
Thanks
MZ

To print Digital signature on the Purchase Order

How to print Digital Signature, on the PO Print copy (PDF).
It will be based on release strategy. Whoever is approving the PO, his signature should be printed automatically on the Purchase Order.
How to achieve this ??
Please let me know in detail
thanks
amit

Hi Amit,
I am not sure on how to get the the signature of the person who released the PO, because as per my understanding the Relase Strategy i.e the Relase code is attached to a Basis profile.
What I would suggest is if you can get all the guys who can release a PO and define him as a Purchaser ie. a Purchasing group then it would be easier to print his signature in the PO.
Here are the Highlevel steps
1. Just have the Signature you want to print in a Tiff format.
2. You can upload the signature as a standard Text using program RSTXLDMC to upload and give a text name.
3. call the text name in your sap scripts.
reward if useful.
Thx,
MJ

Print out for movement types

Hi Friends,
How to configure print out for movement type 561 or for scrap ?
Can you pl tell me step by step where and how to configure?
Appreciate your help.
Thanks,
Venkat

Hi Venkat,
What you want to print. if you only want to print out the transaction done thr movement type 561. If you are not going through any development then follow the under mentioned process :
Go to MB51- Select the material, Plant & storage location- put the movement type 561 & 562- select the ranges of date- execute it. System will give the report. Then for print out go to List tab and select the print. After clicking on the print tab, you have to fill some informations like- Output device- Put Locl then No of copies-then click on continue. System will give you to select the printer. Just select and print.
If this is enough then ok otherwise inform me.
Hope this will clear your issue.
T & R,
Brijesh

SAPScript - Print Preview 2 Pages - Physical Print overlap as 1 Page

HI Experts,
I have a problem with Invoice SAPScript Printing - where the print preview is good with 2 Pages,
But when it physical prints out - Only 1 page and overlapping the Second page content to the first.
Any idea where did I miss out?
Thank you in Advance.
Regards,
CWLIM

HI ,
Sheelesh is right.
I had both SAPScript and Smartform issue with the overlapping printing.
What you need to do is to check your page format to see if it is the correct size for the specific printer.
If it is too big for the printer paper size - it will overlap the printing as 1 page.
For example : A4 Lanscape printing on normal HP Laser Printer - DINA4 Landscape should be used.
Or at least when you define your own page format - refer to the correct size and orientation.
HOpe this helps.
Thank you all

SAPscript print program for multiple pages

Hello friends,
How to write SAPscript print program for multiple pages? please help me.
Thanks and regards,
Shivanand.

I believe you have posted this question in the wrong forum. There is an ABAP Forms Printing Forum.

Retro entires in HR Forms are not printed when using device type ZHPP3005

Hi All,
We are doing a HCM implementation. We are using HP P3005n printer and ZHPP3005 device type to print our HR forms. We are using ZCalibri font.These are smartforms. Everything was printing perfectly.
Then there were retro calculations made to these forms.Strangely, the forms doesn't display these retro entries in the print preview using ZHPP3005 device type. Only the retro entries throughout the form are not printing. All other entries get printed.
When we use device type HPLJIIID, we get these retro entries printed in our form however the format of the form gets changed.
Now, we want to use device type ZHPP3005 and get these retro entries printed. How would we achieve this? Is this a device type issue? Or, anything needs to be done in the smartform? Why is this issue?
Please help. Quick response will be appreciated. We are nearing our Go Live date and needs this resolved immediately.
Thanks in Advance.

Hi,
Check the assigned page format to your custom device type. Try to assign all the page format which are available for
HP*** which you gives you desired result.
Regards,
Vamshi.

Migrating SAPscript print program to Smartform

hello everyone,
Requirement is to print transfer orders. Current functionality supports SAPscripts and its print program. Since we are going to be using Smartforms, I need to change the print program so that it calls the custom smartform created by me.
Can anybody help me out by telling me a step-by-step process as to WHERE and WHAT changes I can do in the SAPscript print program so that I can use it for my Smartform?
The SAPscript print program that needs to be changed is: RLVSDR40.
Thanks in advance.
Regards,
Fred.

Hi Fred,
The system does not migrate the print program (data retrieval) or the form logic contained in the print program. You must make the required changes to the respective print program yourself. PL take a look at the following
<a href="http://help.sap.com/saphelp_47x200/helpdata/en/9d/9599386185c064e10000009b38f8cf/frameset.htm">SAP help</a>
Regards,
Suresh Datti

SAPscript printer resident signatures HEX TYPE PCL - TROY

Similar Messages

Maybe you are looking for