Satellite C45 with lunux

Hello.
I have recently installed Linux OS in myt Satellite C45 and the problem is that the touche pad enable / desable key , output screen change key, brigth up / brigth down key and wifi key are not functional.
For example, the volume up / volume down key works fine
Do you have some issues like this reported ? is there a known problem with this operating system ?
I have installed Elemantary OS which is like ubuntu 12.04
I have googled in internet for this issuse but until now I didn't find a solution
Thanks in advance for any suggestions

The most probable cause may be a corrupt Live CD, try again, using a new copy, Ubuntu 14.04 is just released, check that you had the correct choice between 64 and 32 bits, I just installed a Ubuntu 14 on a Toshiba Satellite L645D and everyting works fine

Similar Messages

HT204153 How do I use a satellite subscription with my Apple TV?

llooking to use a satellite subscription with my Apple TV how do I do that?

Hello gigimaid,
If your satellite service connects to a modem or router, you should be able to use either Wi-Fi or ethernet to connect your Apple TV to the internet. This resource should help:
Switch between wired and wireless networks on your Apple TV
Disconnect the Ethernet cable from the Apple TV.
Navigate to Settings > General > Network to join a Wi-Fi network.
A list of available wireless networks will appear. Using the up and down buttons on your remote, navigate to the network you wish to join and select it.
If your wireless network requires a password, a keyboard will appear, allowing you to enter the password using your remote.
If the network you wish to join is hidden, click Other. Then enter the network name using the onscreen keyboard and the remote. Enter the password if necessary.
After Apple TV has joined the network, a Connection Succeeded screen should appear. Click Done. The screen now should display the wireless network information, including network name, IP address, Wi-Fi address, and signal strength.
To switch back to a wired connection, connect the Ethernet cable. Apple TV will switch to the wired connection automatically. Apple TV prioritizes a wired Ethernet connection.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How to defrag & cleanup Satellite C650 with Windows 7

How to defrag & cleanup Satellite C650 with Windows 7?

Hello,
Moreover I can suggest you to:
1) Perform a regular disk error-checking (check this as an instruction http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors)
2) Perform a virus scanning with an antivirus e.g. Microsoft Security Essentials
3) Check you computer for performance issues and resolve them (go to Start => type 'Performance Information and Tools' hit Enter, in a new window on the left side click 'Advanced tools' and review the performance issues enlisted (if any).
Good Luck!

MSI 770 C45 with Phenom 955 - Random freezing

Hi,
I recently bought the 770 C45 with an AMD Phenom 955 and I have had endless problems. I get random BSOD's, particularly when I am running processor intensive applications. I can’t seem to get the timings and voltage correct in the BIOS, I tweak it slightly and it seems ok for a couple of days then the BSOD's will start again, I tweak again and it’s fine for a few more days then problems start again. A vicious circle! Can anyone recommend BIOS settings I can try to help with this problem? I have looked all over the net and tried many suggestions but as of yet I cannot find the correct settings. I have read plenty of threads on this forum before posting this but couldn’t find anything that I haven’t already tried.
Any help would be much appreciated.
Mark.

Quote from: sparkeh on 23-January-10, 22:31:51
Thanks for all the advice.
Tried with 1 stick and the system was alot more stable, no BSOD's or any kind of freezing. I ran prime95 overnight with 1 stick and all was fine, if I insert another stick the system is still stable but I get an error in prime95 after a few minutes.
[Jan 23 12:02] Worker starting
[Jan 23 12:02] Setting affinity to run worker on logical CPU #2
[Jan 23 12:02] Beginning a continuous self-test to check your computer.
[Jan 23 12:02] Please read stress.txt. Choose Test/Stop to end this test.
[Jan 23 12:02] Test 1, 4000 Lucas-Lehmer iterations of M19922945 using FFT length 1024K.
[Jan 23 12:03] Test 2, 4000 Lucas-Lehmer iterations of M19922943 using FFT length 1024K.
[Jan 23 12:06] Test 3, 4000 Lucas-Lehmer iterations of M19374367 using FFT length 1024K.
[Jan 23 12:07] Test 4, 4000 Lucas-Lehmer iterations of M19174369 using FFT length 1024K.
[Jan 23 12:10] Test 5, 4000 Lucas-Lehmer iterations of M18874369 using FFT length 1024K.
[Jan 23 12:10] FATAL ERROR: Rounding was 0.5, expected less than 0.4
[Jan 23 12:10] Hardware failure detected, consult stress.txt file.
[Jan 23 12:10] Torture Test ran 8 minutes - 1 errors, 0 warnings.
[Jan 23 12:10] Worker stopped.
I am in the process of buying a new PSU, the system is so unstable with all memory slots populated.
Quote
Tried with 1 stick and the system was alot more stable, no BSOD's or any kind of freezing. I ran prime95 overnight with 1 stick and all was fine, if I insert another stick the system is still stable but I get an error in prime95 after a few minutes.
Re-test the each stick alone. [You may have defective stick]
If each one is stable at his own, before fill all 4 DIMM's:
* Leave Memory timings to Auto
* Ensure 2T is used
* Drop memory freq. to 1066
* Apply memory voltage recommended by memory vendor

How to connect my Satellite A200 with a Philips LCS TV?

Hi, I have problems to connect my Satellite A200 1E1 with a Philips 32 PF9967D LCD-TV HD ready.
The manuals recommend a HDMI extension that is unfortunately not availble with my Laptop.
However, isn't is possible to use a S-Video connection instead? I could accept a reduced quality. When I connect the Laptop with the TV, I have the impression that the Satellite does not send any signal out. The "FN F5" combination does not show the opportunity to switch between the screens. Once I connected a beamer and had no problems at all with switching between beamer, laptop screen or both.
Any comments would be highly appreciated, thanks a lot in advance.

Hello
In user manuals is written in almost each chapter about ports or slots a short comment: depending on configuration. That means that this users manuals can be used for different A200 notebook models.
Every notebook delivered with HD-DVD optical disc drive has also an HDMI port. According the notebook specification your notebook has no HD-DVD ODD and because of that there is also no HDMI port.
For TV-out there is sonly one port S-Video. Using this port you can send video signal to your TV. I have LCD TV too and I have used it many times with my A200 notebook. It is very simply but be sure you use the right channel (S-Video) on your TV. Using FN+F5 key combination you can switch to the TV.
If this does not work you are doing something wrong.

Can not use my Satellite A200 with TV

Hi,
sorry to bother you all with this - I recently purchased a Satellite A200-A1L and have been trying to connect it to my TV via s-video leads... I am not new to this and know how to set it up but I seem to be having problems doing it on this laptop.
I have enabled the TV and set up everything to go but my TV will not pick up the signal or the signal is not being put out by the graphics card? My previous laptop worked fine with s-video and the same TV I still own (a 24" Sony Trinitron). I purchased this laptop to do the same but it seems that it will not work - is there anything you can do to help me please?
Despite trying all the functions and reading in depth everything to do with the video outputs AND everything saying its running fine it just wont work HELP ME!!!
PS: I am happy with the laptop in general it is a nice piece of kit, I am just unhappy that the s-video will not run properly.
Kind regards, Lisa.

hi buddy, sorry to say i tried that but i get no signal. i dont have a lcd tv i have a sony trinitron, which worked fine before with s-vid. as i say i have tried everything in the book to get this running but to no avail..... all help would be greatly appreciated. a friend of mine had this exact problem too - he upgraded his laptop and could no longer use the s-vid with his older tv. to solve the problem he went out and bought an lcd tv. working fine now. if i had the money i would have 1 already and know it would work fine but i dont PLS PLS PLS help me

Satellite L40 with no Wi-Fi after Update of Vista

Hey there,
i got a Toshiba Satellite L40-137 and installed the Service Pack 1 of Vista.
And now my WLan/Wifi is just deactivated with no information which driver I need or something..
Well, it seems like this is a common issue because i googled lots of similar questions but found no proper answer.
Some Facts:
1) The little lamp at the bottom of the keyboard doesnt work
2) the connectivity doctor just tells me wifi is "deactivated"
3) fn+f8 does absolute nothing
In case you got any workaround I'd be pretty thankful! :)
Thanks a lot,
Heiko

Hi heiko_1,
That means this happened after Service Pack 1 installation on Windows Vista?!
Well, in my opinion you can solve it with driver reinstallation. Just follow the link posted by Mike30 and download the latest version. This should work.

Ho to reinstall the OS on Satellite 1900 with Recovery CD

My computer has become very slow and I wish to reformat the hard drive and re install the operating system. I have the Product recovery CD-ROM and the Tools and Utilities CD-ROM. Are these the discs all I require to do this operation.
I am also worried that on non of the discs is the Microsoft Windows key reference number to install windows. Where can I get this serial number from?
I bought the machine new.

If you use delivered recovery installations CD you dont need any registrations number like after usage of Microsoft full version installations CD.
Install it and be happy. In 20 minutes only the notebook will perfectly configured.
Back to your second question: Satellite 1900 is pretty older notebook model and at this time SP2 was not available. That means you must install it alone. After installing OS install SP2 immediately and before you start to use it start Windows update option in Internet Explorer.
I have had Satellite 1900-703 over two years and I have never had any problems. SP2 installation was simply and I havent notice any problems with any kind of update.
By the way: this unit has small cooling fan at the bottom side. I recommend you to check it from time to time and be sure there is no dust.
Bye and good luck!

Satellite P300 with screen turning pink

Hi
My Satellite P300 is model PSPCCA-OC6O1Y. The problem I have is a lot of pink on the screen. This has been reoccuring over the last week with this morning the worst. Presently I have two distinct pink pencil lines running down the screen just right of middle, and I also have many other random pink pixles jumping all over the place.
Earlier today what would normally be white on the screen is pink and moving which made it almost impossible to see the screen and use the machine. A shut down and restart has bought it back to a useable position, although the problem has not gone away. On restart no sign of pink on the screen during the normal bootup - no sign of pink on the log in page and pink started as soon as either the browser or email apps were activated. It does go across all programs - I cannot isolate it to any one program, so I suspect it is not a program specific issue.
I am not a techie, just a user, so if the reply can be in simple to understand language that would be appreciated. The machine is under warranty, however I am trying to avoid downtime for repair which is critical if possible.
Thanks for your help

Hi Fletch,
Did you connect an external monitor to your notebook? With this external device you can identify the reason of this issue. That means if the external monitor works properly, it seems to be related to the internal display that must be changed.
As Jeka-IL wrote, contact nearest authorized service provider in your country. The guys will try to help you and if your notebook is under warranty, the repair is for free.
Here is a list of ASPs:
www.mytoshiba.com.au > Support > Find a Service Centre

Dual boot on Satellite A200 with Vista-XP?

Computer details: *Satellite A200-PSAE6E...*
The laptop came with Vista...I managed to install Windows XP (with new drivers etc...) and it' s working just fine *BUT* after reboot, even Acronis OSS doesn't recognize Vista anymore, and the computer boots directly to Win XP only. (I need both OS...)
I'm searching many hours now instructions for *dual boot*, but everyone takes for granted that I have an Installation DVD for Vista... I don't!!!
Toshiba came only with the Product Recovery CD, so all the instructions about MBR and the solutions that even Microsoft gives me (E:\boot\bootsect.exe /nt60 All........) it's useless!
Is there anybody out there???
Please....if you can give me any hint at all it would be.... just a miracle...thanx

Hi,
This isn't direct with your problem - but I was wondering if you would be able to help me? As like you I have just brought the same laptop, and there was no installation disk just the restore disk?! I am trying to open some applications in PowerPoint but it keeps asking for the product key, although I have put this in as it is on the base of the laptop, it is still stating it is wrong?!
Have you had any problems with PowerPoint?
Thanks
Yvette

Instructions for opening a Satellite Z930 with a slot for SIM card

Hello,
I have a Satellite Z930 which I would like to open in order to replace the original SSD with one having a higher capacity.
The thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=279122
was very helpful.
But my PC has a SIM card slot on the right side (side opposite to the microphone and the headphone)
Even after taking off all the 14 screws (including the torx one right in the center), the back cover can not be lifted up on the side of the SIM card slot. Something is holding it back.
Has anyone in the community already succeeded in removing the back cover for this confiuration ?
Thanks in advance for your help.

Randy, Thanks anyway for your time.
After hesitating a bit, I finally decided to remove the SIM tray completely (since that was what was preventing the backcover from coming off).
When you pull at the tray (it is plastic and gray in color and opposite to the audio and video outlets), it does not come off completely when you pull it out normally to maximum (as when inserting a SIM card). You have to frankly tug and pull hard and the plastic tray comes out (just take care not to break it, whch shouldn't happen since the tray is supple and flexible).
Once the tray is out, the back cover comes off (like explained in several videos on the net, especially a good one mentioned by Randy).
Now, I could replace the original factory 128Gb SSD with a 480 Gb disk from mushkin (Atlas mSATA SSD).
This disk from mushkin is just about the right size to go into the Z930, a bit more bigger and it would not have fitted !
Hope this is useful to others.

Re: Satellite P750 with 2 external monitors

Hi,
I am just wondering if it is possible to have two "external" LCD monitors connected to my Toshiba Satellite P750?
One on the VGA and the other one on the HDMI perhaps?
Cheers
Niels

My system is factory standard Windows 7 64-bit with no modifications of any kind. The system automatically detects the monitors.
I can switch between displays using the Fn+F5 key or by using the right-click menu from the Windows dekstop (Graphics Options - Output to - Extended Desktop...) or by using the Intel graphics setup in 'Graphics Properties'.
The VGA attached display shows up as 'Monitor' and the HDMI attached display shows as 'Digital Display'.
So I can have any combination of two of the three displays: built-in display, VGA or HDMI. It would be nice if I could use all three at once but that seems to be a hardware limitation.
I can set any display as tthe primary Windows monitor. In my case I have the setup 'Graphics Options - Output to - Extended Desktop - Digital Display + Monitor' which makes the HDMI display the primary. Using the 'Extended Desktop' configuration means that I can drag windows from one monitor to another as if they were one large monitor, but I can configure them separately and play full-screen games on just one monitor while the second monitor is used to display other information.
I made sure of being able to use two external monitors before I bought this system. I discovered the benefits of dual external monitors many years ago and I would hate to go back to being restricted to just one.

Has anyone else a large amount of bandwidth being used when running the new iOS 7? I have satellite internet with a fixed gigabyte allowance a month.

I am seeing bandwidth spikes when using the new iOS 7. I have satellite internet so I have a monthly gigabyte allowance. When the ipad is in sleep mode or just doing casual browsing it is fine. But for example, last night I put the ipad in airplane mode and this morning when I took it out and it reconnected to my router it immediately sucked up ~300mbs of bandwidth. I know for the majority of people this no big deal but when you are on a fixed amount a month this becomes costly! Is there anyone else noticing this, and what appears to be happening? I never had this problem with ios6.
Thanks!

Hi Aaron762x51,
Welcome to the Support Communities!
The article below provides some troubleshooting steps for your issue.
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/ts4000
Cheers,
- Judy

Satellite U200 with Win XP - Display device change utility is not working

Hi there,
I reckon there's nothing wrong with his installation since I experience the same problem.
Fresh install of win XP on a U200 satellite Pro.
WXP updated to sp3 straight away. Then downloaded all drivers baseD en serial number from toshiba website, then installed them in the same order as advised on the installation list but I get the same error installation message as sjoemie1 when I tried to install "hotkey for display device" etc.
ANYONE KNOW HOW TO REINSTALL THOSE TWO FILES?

Hi
The Common Modules v6.05.00 for Win XP needs to be installed firstly.
Furthermore there are two tools called
*Hotkey Utilities for Display Devices v3.4.4.1-XP*
and
*Display Device Change v2.3.0.0*
Both software part allows you to switch the display device from LCD to LCD+CRT or CRT mode by pressing Fn+F5
So if you have any problems installing the first utility, forget this and try the second one.

GPS/Satellite issue with running apps

All of a sudden, on several different running apps I use (which use GPS/satellite to track how many miles I run), have become wildly inaccurate. Maps of my runs show zig zagging all over the route when I really am just going in a relatively straight line. I've had no problems for 1+ years of using the app in the same areas, so I don't think it's because of the signal, also, other people I am with using the same app don't have the same problem. It has also occurred on multiple (at least 3) different apps, so it's not just specific to one app. I don't have problems with it finding my location when I start the app, it's just along the route that it goes bonkers. I also don't seem to have any location/gps problems with any map-related apps. This has been driving me nuts and the app developers are no help. Please help me, I'll try anything!!!

Toggle location service off and on by going settings>privacy>Location services. If that doesn't fix the problem reset network settings or reset all settings.

Satellite C45 with lunux

Similar Messages

Maybe you are looking for