Satellite L630: unsupported bios message while installation of ECO Uti

Hello everybody ,
anyone can help me to solve this problem ?
I have Satellite L630. After installing new OS and all the drivers during the install of the Eco utility it gives me this "unsupported bios"
What can i do?
Note : I've updated the bios to the last VERSION

Hello
As far as I know not all Satellite L630 were delivered with Eco utility so maybe you have model that was delivered without it.
Please dont worry about this Eco utility. If you cannot install it is not so important. Instead of Eco utility you can use Power saver plan in power settings and switch between power plans quickly using FN+F2 key combination.
Bye and good luck.

Similar Messages

Satellite Pro A300D - Error message while watching DVDs

Hi There
I have a problem with my satellite Pro A300-140 running Vista 32-bit OS
Every time I try and watch a DVD I get an error message " Unable to output the video to an external device. Please check the external output setting after ending the application "-I am not trying to connect to anything - I just want to watch a movie !
Any ideas - I did read this was a known problem but I can't re-find the information ?
Thanks

Hi
You should try the new Realtek sound driver from the Realtek page:
http://www.realtek.com.tw/
Furthermore I recommend updating the Toshiba DVD player. It's placed on Toshiba European driver page.
Just one tip; Im using the VLC player. Its free software and very nice
It plays almost all video and audio formats google for VLC player!

Error message while Solaris 10 installation

I got that error message while installation without knowing the actual reason behind it :
Searching for configuration file //cdrom/solaris_10/misc/install_config/sysidcfg
Could not find file.
Searching for Jumpstart directory : not found
could not find matching rule in rules.ok

OK, reinstalled XP, and problem solved.

Error message NIPathDir property while installation

Hi,
we are facing an error while installation of Lab VIEW 8.2.1 on windows vista. Each time an Fatal Error message appears ;
"fatal error NIPathDir property....is undefined"
Please tell me the solution for this error.
Thanks
Altaf

Hi Altaf
I found following entrys which may help you fixing the failer.
Why Do I Receive a 'Fatal Error: Required NIPathsDir ...' Message when Running a National Instruments Installer?
http://digital.ni.com/public.nsf/allkb/FEC14156DCF364908625733E004E7A01?OpenDocument
Dont know if you have a 64 bit version of windows vista:
Installing LabVIEW on Windows Vista x64 Edition
http://digital.ni.com/public.nsf/allkb/E9B4EA0143514DCB8625725D0050680A?OpenDocument
post bag with your emprovement
Lars

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Trying to install photoshop elements 11 and keep getting the same error message: "The installation process encountered an error while installing shared technologies."

Medops20 please see Install rollback and Shared Technologies | Windows for information on how to resolve the current error.

HT3960 I am receiving the message ' I Tunes Installer Interputed' while installling I Tunes 10.7.021 is therea solution

am receiving the message ' I Tunes Installer Interputed' while installling I Tunes 10.7.021 is therea solution to fix this

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

Linux not being install on Satellite L630

Hey everyone,
Can you please help me?
I am trying to install Red Hat Enterprise Linux 6.0 in my Laptop i.e, Toshiba Satellite L630, and I am getting the error, It is asking for the driver disk, I have tried with the DVD and bootable pendrive, and I've also updated the BIOS of my system, but still the same problem.
Plzzzzzzzz Help..........

Hi there!
Are You sure about the version?
RHEL 6.0 seems not to be the current release? Maybe it is an outdated release?
Current RHEL is 6.3.
What exactly is the installation asking? Please be exact since it makes things a lot clearer.
Also please specify which steps in the installation that You have passed.
BTW - is there a special reason for using RHEL 6.0?
Thanks!
Tom

I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory...

I'm trying to install a Citrix XenApp for work purposes and am having a hard time. The message "The installer has insufficient priveleges to this directory: C:\Program Files (x86) \Mozilla Firefox \Plugins \resource. The installation cannot continue. Log on as administrator or contact your system administrator." I am using a Toshiba Satellite laptop and am the only user and administrator as well. I have read other Firefox support articles and google answers but nothing has resolved this issue. Please help! Be detailed and visual if possible

There are no BIOS settings, because Macs don't have a BIOS. I don't use Parallels, but I assume it has simulated BIOS settings. You'd have to consult its documentation to find out how to change them.

Satellite A300D-135 - BIOS - System Configuration Data Read Error

After Booting a Satellite A300D-135 laptop the following error message appears:
<Several BIOS messages >
3070M Extended RAM Passed
512 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
Fixed Disk 0: TOSHIBA MK2546GSX
Mouse initialized
ERROR
System Configuration Data Read Error
Press <F1> to resume, <F2> to Setup
After pressing F1 the machine boots Windows just fine, but the error message is quite irritating while it comes with a loud BEEP
I've tried the following things so far (in this particular order):
- Loaded BIOS defaults
- Flashed the BIOS with latest BIOS (2.80) for this model type
- Reinstalled windows with HDD format
All of these haven't worked.
I've seen the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but until now I haven't been able to find a working solution.
It might me a hardware issue, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work just fine in Windows, so this doesn't seem the issue). Another solution that is mentioned in some forums is replacing the cell battery. But because the laptop keeps time properly I don't think this is the case either.
Any ideas ?
Regards,
GJ

Hi buddy,
It seems that the power on self test has detected a hardware error... :(
I think such a problem like this you cant solve with loading the default settings in BIOS or with an update because its hardware based error.
In your case I would contact an authorized service provider. The guys can check your notebook because they have special diagnostic tools for Toshiba notebooks and access to all Toshiba databases I think.
You can find a list of them here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
Usually they work really fast and you will have a short repair time I think. In my case it did take only one week until I got my notebook back. :)

Satellite 1410-604 - BIOS update Incorrect BIOS update in the web?

Hi there again!
Now with a new and weird matter.
We all know that old say... "If it is not break, don't fix it". And if you put it into more informatic terms, "specially if it is a BIOS".
Yes, we all know that the BIOS is something quite dellitate to handle. For some reason we normally feel like if we were handling something like nitro-glycerine, or some radioactive product. And this is because we all know what is being put in risk in that moment: our (or sometimes others) computer, the full system could end as dead as some pieces of metal, plastic, and wires.
Well. I passed through all of that more than ten times in my life, and only once it went wrong. But since that old motherboard was already dead, It was not important. But I allways was EXTREMELY care. I allways cross checked everything before doing anything, allways got a backup and a way to restore that backup... and allways did this in COMPAQ systems, that were prepared that way. Updating a BIOS was just about preparing a disk, turn on the PC with the disk in the diskette drive, and wait. And if you didn't like the results, you simply click "return to previus BIOS" and that was it... very nice. And easy.
Few days ago, a friend brought me a Toshiba Satellite 1410-604 to solve some issues that were driving him crazy. After removing an expired Norton Internet Security, install avast and scan, I found more than one hundred files infected with a wide variety of virus, malware, trojans, and whatever you could imagine. Avast removed them all, but the remains of the operating system was so unstable that we decide to format and install from scratch.
I asked for the restoration disks, that obviously he don't have because they were lost in one of his movings. After we got the confirmation from Toshiba reps that there are no recovery disk available for this model, because it is too old, we decided to install from scratch like any other normal PC, and resigned to loose some of the utilities that come with that CDs and that are not available for download in the website.
I downloaded all of the software available for this model, including two BIOS updates. (Actually only one update, but in two versions: Windows and Traditional), and prepared a CD with all the drivers and programs just like if it were a brand new system install. And everything went very well, no problems at all. Until we got to the Wireless LAN card, but that is another issue that is already solved (the mini PCI card for the WLAN does not support WEP or WAP encription, and it is not possible to connect to any wireless LAN encripted).
At this point, and when I started configuring and enabling PCMCIA devices, and USB devices (this computer only supports USB 1.1 not 2.0) I discovered this text in the Toshiba Website:
"This Bios Update adds increased functionality to your system.
(BIOS is an acronym for Basic Input and Output System. This program is stored in a Read-Only Memory chip on the motherboard.
When the computer powers up, the BIOS is launched to perform various start-up functions.)
For detailed update information please refer to Toshiba BIOS-Update Information"
(you can find this here:
[http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU] you have to look for:
Archive
Satellite
Satellite 14xx
Satellite 1410-604
PS141E
Quite specific. Isn't it?)
According to the information in that same website, the BIOS available fits the following models:
"Satellite 2410-414, Satellite 1410, Satellite 1410-654S, Satellite 1410-814, Satellite 2410-303, Satellite 2410-304S, Satellite 1410-354, Satellite 2410-601, Satellite 1410-401, {color:#ff0000}*Satellite 1410-604*{color}, Satellite 2410-404, Satellite 1410-301, Satellite 1410-304, Satellite 2410-S403, Satellite Pro 2100, Satellite 1410-S203, Satellite 2410-304, Satellite 1410-554, Satellite 1410-S102, Satellite 1410-354E, Satellite 2410-703, Satellite 1410-303, Satellite 2410-S203, Satellite 1410-801, Satellite 2410-603, Satellite 1410-902, Satellite 1410-313, Satellite 1410-802, Satellite 1410-714, Satellite 2410-354, Satellite 2410-514, Satellite 1410-614, Satellite 1410-704, Satellite 2410-515, Satellite 2410-504, Satellite 2410-702, Satellite 1410-S103"
Yes... it's there!
Now, when you go to the "Toshiba BIOS-Update Information", you get:
"FAQ Ref.: TRO0000000b07
A BIOS update is a {color:#ff0000}*relatively simple operation and can be carried out by most competent computer users*{color}. All BIOS upgrades can be obtained from "BIOS Update" Download Section click here..
Note: The BIOS files are machine specific so the correct BIOS for your machine must be used."
Please note that Toshiba does not disencourage the handling of BIOS, on the contrary: they even encourage people to do so. This is not necessary bad, but at the same time they encourage people to 'play around' with such a delicate matter, at the end of that same page, in little letters they say:
"Toshiba provides this information "as is" {color:#ff0000}*without warranty of any kind*{color}, either expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Toshiba shall not be responsible for the topicality, correctness, completeness or quality of the information provided. {color:#ff0000}*Toshiba is not liable for any damage caused by the use of any information provided, including information that is incomplete or incorrect*{color}."
This should trigger yellow alarms in our minds.
+"Human error is inherent to humans, and it is not possible to erradicate. It will allways appear, sooner or later" (Prof. James Reason).+
And finally I made the mistake. Even though I read that warning, I remembered all those successfull BIOS update with COMPAQ, and relied in Toshiba. That update was available there, and Toshiba was telling me that it was for this computer. Great!
So finally I unplugged all devices (USB), removed the PCMCIA (WLAN),plugged the battery charger to avoid any possible battery problem, restarted windows, and then from within windows I started the updater (windows version, as recommended by Toshiba). Everithing looked fine, nothing different of what I used to see on those old COMPAQs.
As warned by the updating program, the system was going to reboot. And actually it did so.
Windows closed quite normally (a bit quicker than normal, but without errors, and since there were no other programs than the essentials -even the antivirus was not running-), the computer switched of, all lights off (normal), and then it switched on again...
{color:#0000ff}*BEEEEEEEEEEEEP... BEEEP... BEEEEP...*{color}
OMG! I never espected something THAT bad. 3-1-1!
And now... What a 3-1-1 stands for here? Award BIOS would mean no video card or deffective video card, but it is not true, since it was working up to 20 seconds ago. It must be the BIOS.
It never came again to life. It is still beeping 3-1-1.
But now comes the investigation of the human-factors involved in this accident.
I found I commited the following failures:
*(1)* To rely in the manufacturer, even though they WROTE their information could be wrong or incomplete. (BAD if I were a QA&QC inspector).
*(2)* I didn't cross checked deeply enough (until it was already too late).
*(3)* I didn't looked previously for the way to make a backup of the BIOS, in order to restore should anything go wrong.
*(4)* Let Toshiba lead me to a path I didn't want to walk, just because of their offer of "increased functionality".
*(5)* Beleave in Toshiba when they said "relatively simple operation and can be carried out by most competent computer users"... they never said it is failproof.
Then I started the most interesting part of the investigation.
{color:#0000ff}*"What went wrong?"*{color}
Obviously, the BIOS update failed somehow, somewhere. And I wanted to know what and where.
First thing I discovered was that there are another search engine in Toshiba called "askiris" ([http://askiris.toshiba.com]) and I looked there in order to see if for any chance I could get the old 1.20 BIOS version that was installed originally in that machine.
And I found something... VERY interesting:
bq. {color:#800080}*From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* bios for these models. TAIS. Downloads. DL. 105481 289838 289838 ACPI Flash BIOS version 1.10 for Satellite 1410/1415/2410. 2002-10-04. 105589...* \\ {color}{color:#800080}* Published 10/4/02* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415* \\ {color}{color:#800080}* FDD Version 1.30 TAIS. Downloads. DL. 105481 357972 357972 ACPI Flash BIOS version 1.40 for Satellite 1410/1415/2410/2415. 2003-01-31. 105589 PUB...* \\ {color}{color:#800080}* Published 1/31/03 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.20 for Satellite 1410/2410* \\ {color}{color:#800080}* error message during BIOS TAIS. Downloads. DL. 105481 305240 305240 ACPI Flash BIOS version 1.20 for Satellite 1410/2410. 2002-11-01. 105589 PUB...* \\ {color}{color:#800080}* Published 11/1/02 | Rating:* \\ {color}{color:#800080}* From: * \\ {color}{color:#800080}* ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410* \\ {color}{color:#800080}* 1) Changed the content TAIS. Downloads. DL. 105481 330963 330963 ACPI Flash BIOS version 1.30 for Satellite 1410/1415/2410. 2003-01-03. 105589...* \\ {color}{color:#800080}* Published 1/3/03 | Rating:* {color}
Those are: V110, V140, V120 and V130 for series 1410/15 and 2410.
GOOD! Or not?
Let's take a look:
First thing I did was download everything all four files.
Then I took the same version that made the crash: 1.40
Than I uncompressed the file, and I found:
06/05/2009 00:17 <DIR> .
06/05/2009 00:17 <DIR> ..
31/01/2003 08:38 1,605,632 11410v14.iso
31/01/2003 08:38 511,764 1370D14.EXE
{color:#ff0000}*08/01/2003 17:03 724,480 2410a9v140.exe*{color}
09/01/2003 09:32 250,663 biofca9t.com
08/10/2002 05:26 30,697 chgbiosa.exe
31/01/2003 08:36 1,087 instinfo.bat
13/05/2002 15:25 378,175 launcher.exe
31/01/2003 08:36 433 launcher.ini
06/05/2009 00:17 0 list.txt
31/01/2003 08:36 14,768 readme.com
*{color:#ff0000}31/01/2003 08:36 12,513 readme.txt{color}*
11 archivos 3,530,212 bytes
3 dirs 9,404,600,320 bytes libres
And I got my first surprise here: There is a {color:#ff0000}*README.TXT*{color} that was not present in the file I downloaded previously from the drivers repository.
So I went to the readme.txt and I found this:
"README.TXT 01-31-2003 CDC
Flash BIOS version 1.40 for Satellite 1410
This BIOS is applicable to the following models:
Satellite 1410-S105
Satellite 1410-S106
Satellite 1410-S173
Satellite 1410-S174
Satellite 1410-S175
Satellite 1410-S176
Satellite 1415-S105
Satellite 1415-S106
Satellite 1415-S115
Satellite 1415-S173
Satellite 1415-S174
Satellite 1415-S175
Satellite 1415-S176
Satellite 2410-S203
Satellite 2410-S204"
Please note that the model 1410-604 is *NOT* listed.
I thought "well, it must be another archive..."
But then I realized of a name that sounds familiar, it was there, in the directory where I uncompressed this 1.40 file, and the name is:
{color:#0000ff}*2410A9V140.EXE*{color}
So I took the other file, the BIOS_Win update, and I discovered that the file name is:
*{color:#0000ff}2410A9V140.EXE{color}* (Ups!)
So I uncompressed it again, to find:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\2410A9v140
06/05/2009 00:43 <DIR> .
06/05/2009 00:43 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663_ BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,793,984 bytes libres
No readme file...
Then another question arised in my mind: What about the other 1.40 file? What does the other 2410A9V140.EXE have inside?
This:
El volumen de la unidad D no tiene etiqueta.
El n£mero de serie del volumen es: 8838-E175
Directorio de D:\Shared\diskette\comparacion_toshiba\askiris\241 0a9v140
06/05/2009 00:46 <DIR> .
06/05/2009 00:46 <DIR> ..
*{color:#0000ff}09/01/2003 09:32 _250,663 _BIOFCA9T.COM{color}*
17/07/2002 03:38 35 biosupd2.ini
13/07/2001 13:22 6,277 chgbios2.vxd
*{color:#0000ff}08/10/2002 04:26 _30,697 _CHGBIOSA.EXE{color}*
09/11/2001 09:14 134 clean2.reg
17/07/2002 03:35 342,064 install2.exe
16/07/2002 06:55 241,664 nchgbios2.exe
18/08/2001 11:41 3,435 nchgbios2.sys
23/10/2001 18:55 11,476 nchgbios2NT.sys
26/08/2001 09:00 49,152 nchgbios2svc.exe
13/07/2001 17:05 49,152 tbdecode.dll
14/03/2002 06:42 49,152 TCHGBIOSInfo.dll
21/06/2002 11:25 1,796 tosclean2.bat
09/11/2001 12:01 967 tosclean2.pif
21/06/2002 11:34 1,841 toscleanAUTO2.bat
21/06/2002 11:44 1,796 toscleanSMS2.bat
21/06/2002 08:51 2,038 tosntclean2.bat
21/06/2002 08:51 2,084 tosntcleanAUTO2.bat
21/06/2002 08:52 2,038 tosntcleanSMS2.bat
20 archivos 1,046,461 bytes
2 dirs 9,402,781,696 bytes libres
*{color:#ff0000}They both have 20 files, and 1,046,461 bytes. I asumed they are both the SAME file{color}*.
And the readme file does not list the model 1410-604 in its readme file, therefore I cannot explain this except as a mistake from Toshiba. *{color:#ff0000}They put an incorrect BIOS in their website, and suggested the update, and somehow leaded to this kind of errors.{color}*
(Except in the case that one of those models is a different name of the 1410-604 model, and if it is the case... now I don't know why this BIOS do not work with this computer).
The worst part is that neither of those other files (V1.10, 1.20 and 1.30) lists the 1410-604, therefore there seems no possible workaround for this problem. I need an original v1.20 for this CMOS, and Toshiba seems not to have it. They offered me to solve the problem, by leaving the notebook at an ASP, and paying only 95€ for the work and about 280€ for a motherboard replacement, I will get it solved. But they offer no warranty of their possibilities because is a model 'too old' and 'discontinued' and with 'no support'...
In other words, they said "don't bother with this, just go out there and buy a new one" (something absolutely out of my scope in this crisis-time) :P
Thank you for reading soooo far.
Now what I need is to get any ideas of a workaround for this, my ideas are:
(1) This CMOS has a boot-part that still works (it allows a roll-back if you have the appropriate file). So I need a good BIOS to burn into the CMOS, from the VERY SAME model (a BIOS backup) but the backup must be adequate for the burning program (CHGBIOSA.COM).
(2) It is still possible that the BIOS could be OK but the data on the CMOS got somehow corrupted. If so, clearing the CMOS could solve de problem. But I was not able to find a clear cmos button from outside, and after disasembling I took of the battery, with no good results. I have to try leaving the MOBO without battery for longer period (I left it about 20 seconds) just in case 20 seconds don't allow all the capacitors to fully go to zero values. I have not much hope in this point.
(3) Try to get a REAL good update from Toshiba. I contacted several times technical support, and I was able to verify they are only phone-operators, with a script in front of them, and when the problem goes-out-of-scope they fall always in the same answer: "you have to go to an ASP". I still have a low hope to find someone who really knows a bit, and could enlighten with a good BIOS to put in this disks.
(4) As far as I could find, this BIOS is not from any known BIOS-maker. It seems it has been developed by Toshiba (own brand), therefore the Crisis Recovery Disk from Phoenix will not be of any help here. As well as any other BIOS recovery tool not designed for Toshiba's BIOS. But I'm open to any ideas, that could be tested more or less safely. (Remember that the 'BIOS-BOOT-PART' feature is still working, I don't want to loose this only possibility of redemption).
Wwwaaaaoooowww... what a long-post falks! Sorry for that!
Forgive me, but I wanted to be really clear.
Should anyone give some hints or advice, will be greatly appreciated.
Please don't say what I shouldn't do... I already know that. I already researched and already found my mistakes, in order not to repeat them. Now I need to move on, to advance, and to try to solve this, or at least learn how to solve similar things. As much as possible.
Thank you again, in advance, and sorry again.
FenixDigital
Message was edited by: Fenix_D
Changed subject to beter reflect what is the matter about (apparently erroneous BIOS file in Toshiba download center).

Well. 
 
It's not dead, certainly. 
 
The steps that I put in my procedure were: 
 
--> There are two memory sims, that I am going to identify as M1 and M2 
--> There are two memory banks, that I am going to identify as A and B 
 
Next step in order to identify if there are some module or bank that is not working properly are: 
 
The modules were installed as: 
 
M1 --> A 
M2 --> B 
 
1--> Boot without any memory chip. 
 
<blockquote>
A--> X 
B--> X 
</blockquote>
 
2--> Boot with ONE module 
 
<blockquote>
A-->M1 
B-->X 
</blockquote>
 
3--> Boot with the OTHER module 
 
<blockquote>
A--> X 
B--> M2 
</blockquote>
 
4--> Boot with BOTH modules swapped: 
 
<blockquote>
A--> M2 
B--> M1 
</blockquote>
 
5--> Boot with ONE module swapped: 
 
<blockquote>
A--> M2 
B--> X 
</blockquote>
 
6--> Boot with the OTHER module swapped: 
 
<blockquote>
A--> X 
B--> M1 
</blockquote>
 
At this point I got a great difference. It booted, finally. But in order to make a diagnostic, I have to complete the full test, and the results were: 
 
1--> Boot without any memory chip. 
 
A--> X 
B--> X 
 
NOT BOOTING Actually the computer not even tries to read the disk. Only the power led turns on, but even prior to press the 'on/off' button. I think this indicates 'no memory installed'. I would have expected a post failure beeps, but there were no beeps at all. 
 
2--> Boot with ONE module 
 
A-->M1 
B-->X 
 
BOOTED NORMALLY Well. This obviously means that the 3-1-1 beep code means memory error, or one bank failing of two installed. Now I didn't know if the problem was the module, or the bank B. 
 
3--> Boot with the OTHER module 
 
A--> X 
B--> M2 
 
NOT BOOTING Just like the condition in 1. Like no memory installed, therefore there are two possibilities: The bank B is not working, or the memory module M2 is not working. 
 
4--> Boot with BOTH modules swapped: 
 
A--> M2 
B--> M1 
 
NOT BOOTING Just like previous to test condition. Beep code 3-1-1, no boot at all. 
 
5--> Boot with ONE module swapped: 
 
A--> M2 
B--> X 
 
NOT BOOTING This was the important test, because it finally let me determine that the problem is at the module 2 (M2) not at the bank B. But still there could be a failure IN THE BANK B and IN THE MEMORY MODULE 2. Have to do the other test. 
 
6--> Boot with the OTHER module swapped: 
 
A--> X 
B--> M1 
 
BOOTING NORMALLY This really confirmed there is nothing wrong with ANY bank, but one of the modules is not working, actually is not being even detected. This is quite weird, because this computer was working perfectly with those two modules, and in the moment of the BIOS upgrade it seems to fail... How come? 
 
Something weird happened here. I don't know what, but something ruined one memory module (fortunately only one), what I would like to know now is what happened. But at least I have the machine running, with very low memory, but running. 
 
What I am thinking now is what about this BIOS upgrade makes the motherboard not to recognize one of the modules for some reason? 
 
<img class="jive-emoticon" src="images/emoticons/happy.gif" border="0" alt=":)" /> 
 
I will continue my research, but certainly the memory made the difference. 
 
I am not sure why I didn't discover this before, I think I didn't perform this test before, for two reasons: 
 
(1) I tried to boot with no memory, and this was impossible, so I assumed that the problem was not at the memory. 
 
(2) When I heard the beep code (3-1-1), somewhere I read it was a video problem, and I asume most probably it was a video problem (since no video at all was being displayed) but I should have take into consideration that Phoenix BIOS also means with the same 3-1-1 a DMA problem (memory problem). 
 
Okis... It's a pitty having to wait so much between a post and it's approval. I posted my answer two days ago, and since it didn't appear, I believe It didn't upload, so I replied again, and also didn't appeared... until now. It is obvious that a moderator approval is required. That's why I have to wait 24 hours or more to read my post. This slows this forum effectiveness. 
 
Thank you very much for your help. I'll keep you informed. Until we get to a final diagnosis and solution.

Error message during installation and after reboot. I can't continue with installation.

Error message while installing 10.6.3. And even after reboot I can't do anything anymore same message pops up after a few minutes. How can I get new version installed without error message and it ejecting the Installation Cd? Tried booting from external drive since the one on my Mac is not working. Any tips on how to proceed?

Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

Repost-- Facing Problems while installation of SAP NW PT 7.0 on Oracle 10.2

Hello Friend,
Sorry Friends, for my last long.....long...Post.....
Here , i m reposting the same matter...Please help.
We are trying to Install SAP NW PI 7.0 on Windows 2003 Server Enterprise Edition x64, with Oracle 10.2 - 64bit Edition.
On this host, we already have installed SAP NW CE 7.1 with the same Oracle 10.2
SAP NW CE 7.1 is working fine on this Host.
First, we tried to install SAP NW PI 7.0 with jdk 1.4.2.16(32 bit), which was giving the error, while installation using SAPInst. So We installed jdk 1.5.0.15 (64 bit), at own risk. But, the Installation was interrupted due to some unknown error something like "SDM failed to deploy some components...etc....etc.". So, we installed jdk 1.6.0.6( which is perfect for Windows x64). With this , jdk 1.6.0.6 the last problem did not come and we reached at 9th step (of total 98th step of SAP NW PI 7.0 Installation), and was at "Prepare to install minimal Configuration", and controling START and STOP of System. Bu We found that, the System was not able to even start, at that 95th Phase.
After that, we did lot of R&Ds to come out from the trouble.
I am attaching the requied TRACE files, they are as followed.
dev_disp.
%%%%%%%%%%%%%START of dev_disp%%%%%%%%%
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid PI1
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 3132
Thu May 08 16:50:32 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
 o
 + SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 3132) http://dpxxdisp.c 1243
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3902
Thu May 08 16:50:36 2008
 o
 + WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings http://dpxxtool2.c 5371
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >vcerp99_PI1_02 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 3966MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 3968MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 991 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 704
argv[0] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
argv[1] = D:\usr\sap\PI1\DVEBMGS02\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=02
argv[6] = -DSAPSYSTEMNAME=PI1
argv[7] = -DSAPMYNAME=vcerp99_PI1_02
argv[8] = -DSAPPROFILE=D:\usr\sap\PI1\SYS\profile\PI1_DVEBMGS02_vcerp99
argv[9] = -DFRFC_FALLBACK=ON
argv10 = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) http://dpxxdisp.c 1633
***LOG Q0K=> DpMsAttach, mscon ( vcerp99) http://dpxxdisp.c 11822
DpStartStopMsg: send start message (myname is >vcerp99_PI1_02 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Thu May 08 16:50:37 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet http://dpxxmbuf.c 1050
DpMsgAdmin: Set patchno for this platform to 144
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Thu May 08 16:50:39 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) http://nixxi.cpp 4424
 o
 + ERROR => NiIRead: SiRecv failed for hdl 4 / sock 184
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3822) http://nixxi.cpp 4424
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=704)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Thu May 08 16:51:16 2008
 o
 + ERROR => DpHdlDeadWp: W0 (pid 4316) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W1 (pid 1536) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W2 (pid 3388) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W3 (pid 3980) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W4 (pid 2980) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W5 (pid 4164) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W6 (pid 4656) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W7 (pid 4516) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W8 (pid 2576) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W9 (pid 960) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xbf --> 0xbe
 o
 + ERROR => DpHdlDeadWp: W10 (pid 3764) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xbe --> 0xbc
 o
 + ERROR => DpHdlDeadWp: W11 (pid 636) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xbc --> 0xb8
 o
 + ERROR => DpHdlDeadWp: W12 (pid 3896) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W13 (pid 4696) died http://dpxxdisp.c 14532
 + ERROR => DpHdlDeadWp: W14 (pid 4072) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xb8 --> 0xb0
 o
 + ERROR => DpHdlDeadWp: W15 (pid 4808) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xb0 --> 0xa0
 o
 + ERROR => DpHdlDeadWp: W16 (pid 2832) died http://dpxxdisp.c 14532
my types changed after wp death/restart 0xa0 --> 0x80
 o
 + DP_FATAL_ERROR => DpWPCheck: no more work processes
 + DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:26 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu May 08 11:21:26 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4316 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 3388 Ended no 1 0 0
3 DIA 3980 Ended no 1 0 0
4 DIA 2980 Ended no 1 0 0
5 DIA 4164 Ended no 1 0 0
6 DIA 4656 Ended no 1 0 0
7 DIA 4516 Ended no 1 0 0
8 DIA 2576 Ended no 1 0 0
9 DIA 960 Ended no 1 0 0
10 UPD 3764 Ended no 1 0 0
11 ENQ 636 Ended no 1 0 0
12 BTC 3896 Ended no 1 0 0
13 BTC 4696 Ended no 1 0 0
14 BTC 4072 Ended no 1 0 0
15 SPO 4808 Ended no 1 0 0
16 UP2 2832 Ended no 1 0 0
Dispatcher Queue Statistics Thu May 08 11:21:26 2008
===========================
--------++++--
+
Typ now high max writes reads
--------++++--
+
NOWP 0 2 2000 6 6
--------++++--
+
DIA 5 5 2000 5 0
--------++++--
+
UPD 0 0 2000 0 0
--------++++--
+
ENQ 0 0 2000 0 0
--------++++--
+
BTC 0 0 2000 0 0
--------++++--
+
SPO 0 0 2000 0 0
--------++++--
+
UP2 0 0 2000 0 0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Thu May 08 11:21:26 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu May 08 11:21:26 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id owner pid eyecatcher
--------++--
+
0 DISPATCHER -1 WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:31 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >vcerp99_PI1_02 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (5080) (SOFT_KILL)
Stop icman
killing process (1036) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
DpProcDied Process lives (PID:5080 HANDLE:304)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:32 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process died (PID:5080 HANDLE:304)
wait for end of icman
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:33 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:34 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:35 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:36 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:37 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:38 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:39 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:40 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:41 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:42 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process lives (PID:1036 HANDLE:312)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=337
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu May 08 16:51:43 2008
NiISelect: TIMEOUT occured (1000ms)
DpProcDied Process died (PID:1036 HANDLE:312)
DpProcDied Process died (PID:704 HANDLE:288)
DpStartStopMsg: send stop message (myname is >vcerp99_PI1_02 <)
NiIMyHostName: hostname = 'vcerp99'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu May 08 16:51:44 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () http://dpxxdisp.c 12168
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 212 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 212 (pos=3)
SiSelNRemove: removed sock 212
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/17
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 212
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3132) http://dpxxdisp.c 10421
Good Bye .....
%%%%%%%%%%%%%%END of dev_disp%%%%%%%%%
dev_w0
%%%%%%%%%%%%%%START of dev_w0 trace file%%%%
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu May 08 16:50:37 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\PI1\DVEBMGS02\exe\dboraslib.dll' is "700.08", patchlevel (0.144)
B New connection 0 created
M sysno 02
M sid PI1
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 144
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 4316
M
M kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4316) http://dpxxdisp.c 1305
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 25168 (1480)
M DpShMCreate: sizeof(tm_adm) 5652128 (28120)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000010E70050, size: 6348592)
M DpShMCreate: allocated sys_adm at 0000000010E70050
M DpShMCreate: allocated wp_adm at 0000000010E72150
M DpShMCreate: allocated tm_adm_list at 0000000010E783A0
M DpShMCreate: allocated tm_adm at 0000000010E78400
M DpShMCreate: allocated wp_ca_adm at 00000000113DC2A0
M DpShMCreate: allocated appc_ca_adm at 00000000113E2060
M DpShMCreate: allocated comm_adm at 00000000113E3FA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000001146AC30
M DpShMCreate: allocated gw_adm at 000000001146ACB0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000001146ACE0
M DpShMCreate: allocated wall_adm at 000000001146ACF0
M
M Thu May 08 16:50:38 2008
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host vcerp99
M
M Thu May 08 16:50:39 2008
M calling db_connect ...
C Prepending D:\usr\sap\PI1\DVEBMGS02\exe to Path.
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
http://dboci.c 4532
C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C *** ERROR => CONNECT failed with sql error '1033'
http://dbsloci.c 11044
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 00000000138E8FA0 00000000138F11D0 000000001390D9F8
C Attaching to DB Server PI1 (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C Starting user session (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8,usrhp=00000000138F19E8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
http://dboci.c 4532
C Detaching from DB Server (con_hdl=0,svchp=000000001390D8B8,srvhp=000000001390FCE8)
C *** ERROR => CONNECT failed with sql error '1033'
http://dbsloci.c 11044
B ***LOG BV3=> severe db error 1033 ; work process is stopped dbsh#2 @ 1199 dbsh 1199
B ***LOG BY2=> sql error 1033 performing CON dblink#5 @ 431 dblink 0431
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431 dblink 0431
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) http://thxxhead.c 1440
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10468
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server vcerp99_PI1_02 on host vcerp99 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 08 16:50:39 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10688
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 724
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 261
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4316) http://dpnttool.c 327
%%%%%%%%%%END of dev_w0 file %%%%%%%%%%%%
trans.log
%%%%%%%%%%%%START of trans.log %%%%%%%%%
4 ETW000 r3trans version 6.14 (release 700 - 14.02.08 - 14:55:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 08.05.2008 - 17:07:15
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 dev trc ,00000 Thu May 08 17:07:17 2008 0 0.000000
4 ETW000 dev trc ,00000 db_con_init called 0 0.000000
4 ETW000 dev trc ,00000 create_con (con_name=R/3) 0 0.000000
4 ETW000 dev trc ,00000 Loading DB library 'dboraslib.dll' ... 0 0.000000
4 ETW000 dev trc ,00000 load shared library (dboraslib.dll), hdl 0 79007 0.079007
4 ETW000 dev trc ,00000 using "D:\usr\sap\PI1\SYS\exe\uc\NTAMD64\dboraslib.dll"
4 ETW000 25 0.079032
4 ETW000 dev trc ,00000 Library 'dboraslib.dll' loaded 11 0.079043
4 ETW000 dev trc ,00000 function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 254 0.079297
4 ETW000 dev trc ,00000 Version of 'dboraslib.dll' is "700.08", patchlevel (0.144)
4 ETW000 27697 0.106994
4 ETW000 dev trc ,00000 function dsql_db_init loaded from library dboraslib.dll
4 ETW000 21 0.107015
4 ETW000 dev trc ,00000 function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 24 0.107039
4 ETW000 dev trc ,00000 New connection 0 created 18 0.107057
4 ETW000 dev trc ,00000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.107089
4 ETW000 dev trc ,00000 db_con_connect (con_name=R/3) 14 0.107103
4 ETW000 dev trc ,00000 find_con_by_name found the following connection for reuse:
4 ETW000 13 0.107116
4 ETW000 dev trc ,00000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 17 0.107133
4 ETW000 dev trc ,00000 CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 7122 0.114255
4 ETW000 dev trc ,00000 Thu May 08 17:07:18 2008 252994 0.367249
4 ETW000 dev trc ,00000 Oracle Client Version: '10.2.0.2.0' 21 0.367270
4 ETW000 dev trc ,00000 -->oci_initialize (con_hdl=0) 12 0.367282
4 ETW000 dev trc ,00000 Client NLS settings: AMERICAN_AMERICA.UTF8 191178 0.558460
4 ETW000 dev trc ,00000 Logon as OPS$-user to get SAPSR3's password 22 0.558482
4 ETW000 dev trc ,00000 Connecting as /@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 20 0.558502
4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 7651 0.566153
4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
4 ETW000 77 0.566230
4 ETW000 dev trc ,00000 Allocating service context handle for con_hdl=0 9578 0.575808
4 ETW000 dev trc ,00000 Allocating server context handle 29 0.575837
4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 48 0.575885
4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
4 ETW000 161629 0.737514
4 ETW000 dev trc ,00000 Allocating user session handle 6490 0.744004
4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
4 ETW000 39 0.744043
4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
4 ETW000 130057 0.874100
4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
4 ETW000 16 0.874116
4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 16 0.874132
4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
4 ETW000 313 0.874445
4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
4 ETW000 9357 0.883802
4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 13 0.883815
4 ETW000 dev trc ,00000 Try to connect with default password 48 0.883863
4 ETW000 dev trc ,00000 Connecting as SAPSR3/<pwd>@PI1 on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
4 ETW000 15 0.883878
4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 16 0.883894
4 ETW000 dev trc ,00000 0 UTF8 1 0000000007534090 000000000030DF10 00000000003136D8
4 ETW000 19 0.883913
4 ETW000 dev trc ,00000 Allocating server context handle 9 0.883922
4 ETW000 dev trc ,00000 Attaching to DB Server PI1 (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 26 0.883948
4 ETW000 dev trc ,00000 Assigning server context 00000000075530E8 to service context 0000000000313598
4 ETW000 7460 0.891408
4 ETW000 dev trc ,00000 Assigning username to user session 000000000030E728
4 ETW000 19 0.891427
4 ETW000 dev trc ,00000 Assigning password to user session 000000000030E728
4 ETW000 27 0.891454
4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8,usrhp=000000000030E728)
4 ETW000 72 0.891526
4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1033
4 ETW000 37125 0.928651
4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=00000000075530E8)
4 ETW000 16 0.928667
4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=0000000000313598,srvhp=00000000075530E8)
4 ETW000 16 0.928683
4 ETW000 dev trc ,00000 Deallocating server context handle 00000000075530E8
4 ETW000 313 0.928996
4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1033'
4 ETW000 18 0.929014
4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1033 9 0.929023
4 ETW000 dblink ,00431 ***LOG BY2=>sql error 1033 performing CON dblink#5 @ 431
4 ETW000 14700 0.943723
4 ETW000 dblink ,00431 ***LOG BY0=>ORA-01033: ORACLE initialization or shutdown in progress dblink#5 @ 431
4 ETW000 15 0.943738
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'PI1'"
%%%%%%%%%%%END of trans.log %%%%%%%%%%%%%
If u get more trace info, let me know, i will post them one by one.
Thanks in Advance.
Regards,
Shroff Bhavik

I am working on Windows 2003 Server Enterprise Edition x64.
The Processor type is AMD Athelon X2 Dual Core.
Whether JDK 1.4.2 for 64 bit is available ?
I tried Lot of. Ultimately, I installed JDK 1.6.0.9 (for Windows x64 platform).
Anyway,
My Problem is solved.
Actually, in our PC, total 2 SATA Harddisks are installed and , u know that, Control Files of Oracle Instance is created & maintained ,simultaneously, at different location.
One of th HDD , was suddenly dismounted ,due to some technical reasons. origlogA and origlogB are maintained on other (rather than System HDD).
The problems related to version inconsistency of distributed CONTROL FIles occured while working, due to sudden dismount of other HDD.
While the last stage of installation of SAP NW PI 7.0, the START and STOP of PI Server was occurred, but due to previously mentioned error, the Oracle instance (PI1) was not able to start, as the version of Control files was mismatched.
I just notice the alert_PI1.log file , in which this Error was noticed.
I just took one of the earlier version of Control File (that i thought was stable) from one of the location, and copied to the required location.
Then again I tried to restart the Oracle instance of PI1. It worked normally , and the PI1 Server started normally .
Then, I resume the Installation of SAP NW PI 7.0, to complete those last 3-4 steps. The installation completed successfully with JDK 1.6.0.9 (for Windows x64 platform).
Thanks a lot for your cooperations.

Error while installation of Outlook Integration Add On

Hi Experts,
Problem encountered upon installation of outlook add-on
The message box shows "The Procedure point ??OCBFDbDef@@QAE@....... could not be located in dynamic link library BFFramework.dll".
I'm watching this thread . I cannot open the link for the proposed solution to my problem.
[Error while installation of Outlook Integration Add On]
Please provide updated link
Regards,
Sandra
Edited by: Sandra Callanta on Sep 15, 2009 10:55 AM
Edited by: Sandra Callanta on Sep 15, 2009 10:56 AM

Hi Sandra,
You may check SAP Note Number: 953357 instead. The title for the note is: Troubleshooting Add-ons in Business One.
Thanks,
Gordon

Stuck while installation of oracle in linux

Hi guru's
i am stuck with a problem while installation of oracle in linux please help me
i am getting following error
[root@localhost etc]# groupadd oinstall
groupadd: group oinstall exists
[root@localhost etc]# useradd -m -g oinstall-G dba-d/home/oracle-s/bin/bash-c"oracle software Owner" oracle
useradd: unknown group oinstall-G
[root@localhost etc]# Thanks in advance

Brian while keeping that space getting this error actually
[root@localhost etc]# useradd -m -g oinstall -G dba -d /home/oracle -s /bin/bash-c “Oracle Software Owner” oracle
Usage: useradd [options] LOGIN
Options:
-b, --base-dir BASE_DIR       base directory for the new user account
                                home directory
-c, --comment COMMENT         set the GECOS field for the new user account
-d, --home-dir HOME_DIR       home directory for the new user account
-D, --defaults                print or save modified default useradd
                                configuration
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE       set password inactive after expiration
                                to INACTIVE
-g, --gid GROUP               force use GROUP for the new user account
-G, --groups GROUPS           list of supplementary groups for the new
                                user account
-h, --help                    display this help message and exit
-k, --skel SKEL_DIR           specify an alternative skel directory
-K, --key KEY=VALUE           overrides /etc/login.defs defaults
-m, --create-home             create home directory for the new user
                                account
-l,                       do not add user to lastlog database file
-M,                       do not create user's home directory(overrides /etc/login.defs)
-r,                       create system account
-o, --non-unique              allow create user with duplicate
                                (non-unique) UID
-p, --password PASSWORD       use encrypted password for the new user
                                account
-s, --shell SHELL             the login shell for the new user account
-u, --uid UID                 force use the UID for the new user account
-Z, --selinux-user SEUSER     use a specific SEUSER for the SELinux user mapping

Hi all, i am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.

Hi all,
I am trying to install Xcode 3.2.5 & Xcode 4.2 in iMac (Mac OS X 10.6.8) , I am getting error message as "Installation Failed". somebody can help me. Thanks in advance.

I too have the same error while installing xcode 4.2 in Mac os x 10.6.8.
Can any one solve this issue.

Satellite L630: unsupported bios message while installation of ECO Uti

Similar Messages

Maybe you are looking for