Satellite L775D-S7112 mic problem

My microphone isn't working. I've never had a problem with the mic before and I don't know what happened as to why it suddenly stopped working but I can't figure out what's wrong. I've checked to make sure it was enabled and reinstalled to see if that would work but it didn't. Everything is up to date as well so I'm not quite sure why my mic decided to not work all of the sudden. Please help! 

Were you simply reinstalling the sound driver through Device Manager, or were you re-downloading it?
If you haven't tried re-downloading and reinstalling it, try that.
Realtek Audio Driver Version: 6.0.1.6410 Posted Date: 2011-08-04 Release Date: 2011-07-13
If that doesn't help, try using System Restore to restore a previous restore point from before this became an issue.
- Peter

Similar Messages

  • Satellite L655-S5150 Mic problem.

    Waiting for a response - ray
    When I try to record video / sound with my lap, the first pieces of sound comes clear but after 5 seconds or so, the sound goes down, when I want to record myself playing guitar, I can only hear the first 10 seconds, after that the mic "adapts" to the sound or something and lowers itself down, so the sound of the recording starts going down until it mutes and only lets very hard sounds get in the recording.
    Sorry for my English, 

    Satellite L655-S5150
    Ray
    Reinstalling your Toshiba supplied sound driver is a good place to start and should not hurt anything. Download this file to your desktop and double click to install it.
    Conexant Audio Driver(v4.119.0.60)
    But, the proper method is really going to depend on the sound recording software you are using. What software are you using to record yourself playing guitar?  Are you only recording through a microphone?  Are you using the computer's built-in microphone?
    Mike

  • RESTORING SATELLITE L775D-S7340

    All data and partitions have been erased because of problems beyond my control. Thought be erasing everything and start would fix but that is not the case.
    All ordered from Toshiba with there blessings... I have installed Recovery Media for Satallite L770D Series Windows 7 Home Premium SP1 64-bit twice with two different media packages Toshiba sent. Replaced Hard Drive with upgraded 1TB. Replaced Memory Module with upgraded 8GB module. Downloaded Recovery Media again and.....get the same eror message that "Windows has unexpectedly restarted or unable to install Windows....". Is next step to buy Windows 7 Install disk? Did think that came with Recovery Media???? HELP!!

    Satellite L775D-S7340
    Downloads here.
    If you have difficulty restoring the hard disk using Toshiba recovery media, it's probably because the new drive has advanced-format technology. See my post from long ago here.
    We've learned since then that all sorts of difficulties can occur. You probably need to introduce the new storage driver early in the process. See this message.
    -Jerry

  • Driver up dates Satellite L775D-S7222!

    Hi I need some advise. I have two free programs telling me My AMD driver needs up dating. But when I use device manager to up date; after up dating AMD with either program, it finds and installs a different version??? The reason for this message is after up dating the AMD driver with Slim Driver, I started to get a error in my reliability history. I have very little knowledge about these things and I'm confused. I'm going to attach some screen shots and hope some one here can tell me what's going on.
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
    Attachments:
    Capture48.JPG ‏170 KB
    Capture49.JPG ‏104 KB
    Capture50.JPG ‏111 KB
    Capture51.JPG ‏207 KB

    Hi CB! Thanks for your reply. My main goal was to show what part Reliability History played in this. I agree with you about not fixing some thing that isn't broke. I like to try different things; learn from them, and pass it forward. I always have a back up plan that I can revert back to. Also both these programs have a feature to roll back the driver just like the option in Device Manager has. I hope you looked at my screen shots!!
    http://technet.microsoft.com/en-us/library/cc749583%28v=ws.10%29.aspx
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

  • Satellite L775D-S7222 standby modes stalls the computer

    sometimes trying to put the laptop in standby mode FN+F3 stalls the laptop. the screen goes blank and nothing else works, the only option is to hard reset . when this happens most lights stays on and even after removing the power cord the power on light stays lit.
    update to the latest BIOS , still the same.

    Satellite L775D-S7222 
    it is a month old laptop. I called them up, their response was to send the laptop back
    It's usually suggested that you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.
    That tells you if there's a software problem.
    I believe this could be windows 7 issue. have a friend who has Dell and has similar problems .
    Not much of a sample size.
    On July 12, 2011, the sales figure was refined to over 400 million end-user licenses and business installations.
    -Jerry

  • Satellite L775D-10E - No sound trough HDMI

    Hi!
    I can not get sound trough HDMI. Only speakers exist as an alternative in sound devices. How can I correct this?
    The computer is a Satellite L775D-10E. Of cause have i tried different cables and tv:s as well as a projektor. The problem is that I do not have HDMI ouput as an alternative.

    > The problem is that I do not have HDMI ouput as an alternative.
    Thats very strange. Every notebook preinstalled with original Toshiba recovery image that includes right sound driver has this option.
    So can you please tell us s your notebook still with factory settings or you have modifies preinstalled OS or maybe installed own version?

  • Toshiba Satellite L775D-S7210 - Won't boot, Power & WiFi LED lit

    I have a Toshiba Satellite L775D-S7210 laptop that refuses to boot properly. I've owned this laptop for about 4 years and this problem just happened a few days ago. It can turn on, but it leads to a blank screen (as if the lcd is disconnected from power) and only the small Power indicator and WiFi light is lit while the others are off.It does not show any BIOS or POST screen. While it's on, I can hear a electrical whirring sound coming from the underside of the logic board, and the Optical disc and hard disk exhibit accessing activitity. Then, after a few seconds, the CPU fan starts running. This laptop stays powered on forever and the only way to turn it off is to hold the power button or remove the charger or battery. The events that occurred before this blank screen problem was a simple file transfer between the internal hard disk in IDE mode and a cruzer glide 16gb flash drive. Nothing out of the ordinary, just your standard drag-and-drop file transfer. When i completed this file transfer, i rebooted the PC into the BIOS settings. I was going to install Windows 7 fresh, so I went to the setting that had the options for AHCI or IDE, and changed it to AHCI. I saved the changes and rebooted. On the next boot, I got a blue screen error while it was loading the old Windows 7 partition that was left there. It crashed and rebooted.On this next reboot, the laptop could no longer boot and showed a blank screen with just the power light indicator on. And, nothing else would work after that (usb, keyboard, etc). It just stayed blank. How could have this problem have happened? It was very, very random and out of nowhere. How could a change of the BIOS settings cause this corruption? I am not sure if the BIOS needs to be reflashed; I am unable to access the BIOS because the LCD display or externally attached display never prompts with the boot logo. What could the issue be? Any input would be greatly appreciated. Thanks, - forestvenue

    I had a customer with the same issue.  Said it prompted him to update bios.  Afterwards, it came up with "starting windows" and just a few pixels of the windows logo cam up and then froze.  Couldn't boot to safe mode either.  Called toshiba and they recomended restoring the system to factory settings. But I didn't end up having to do that. 
    Toshiba said it was set to FAST BOOT which is why no POST messages came up.  This can be set using the hwsetup utility, but that means booting windows.  So, I was going to restore to factory condition.
    HERE'S WHAT FIXED IT
    To go into system recovery, press and hold 0 (zero) while turning the computer on.
    1st, I didn't have the power supply (customer didn't bring it to me) and the power light just blinked 4 times. 
    After getting a power supply I turned it on holding the 0 down.
    This gave me the chance to press F2 to go into BIOS settings.
    Set BIOS settings to defaults.  Then DISABLE THE FAST BOOT FEATURE (didn't record where that was in the menus)
    Saved BIOS and rebooted and windows started! 
    Good luck!

  • Satellite L775D S7305 freezing

    I have a little problem of my laptop freezing up on me and when it freezes I can not do any thing but push the power button. Here is the specs.
    Satellite L775D S7305
    AMD A6-3400M APU W/Radeon
    64bit 8GB RAM
    500GB HD
    This just started about a week ago and the weird thing is I have not installed any new software or hardware.
    Bought the laptop form Best Buy and the RAM. I had a problem with some software that would not install correctly and had to do a restore, which by the way worked great. Got my software installed and everything was just great for about 4 weeks nothing wrong. Then all of a sudden the laptop starts locking up, and it does not matter what I'm doing. I can be working on some HTML files with note pad and it will lock up to the point I have to push the power button.
    I have a old Satellite M35X-S163 with 2GB RAM and Windows XP and have never had this type of problem.
    I have one other problem that for some reason on one can answer Other Problem.
    It would be nice if I can get this problem fix so I can do some work and make some money.

    brad55: Are you still looking for help with this? Sounds like the same problem we had with my daughter's 2-month-old Toshiba Satellite® L775D-S7222. Briefly, after much trial and error, I determined that it was in fact a HARDWARE problem, NOT software as we initially expected, and it was fixed ONLY after a return to Toshiba factory service for a motherboard swap. I'll be happy to write up the full particulars of MY experience, but I don't want to take the time to do that UNLESS you are still seeking a possible solution to YOUR problem. -- EstherD

  • Help needed with HTC One regarding mic problem with noise cancellation

    I picked up an HTC One last week, and so far I am loving the phone.  Great build quality, screen, sound - all as advertised.
    However, there is one very annoying problem I am having.  When I am talking to someone, I can gear them great, but they keep telling me I sound muffled or robotic.  I performed some tests, and the problem appears to be something with the dual microphones and the HTC One's noise cancellation features.
    Here are the tests I ran:
    Typical phone call, with holding the phone as I normally do on the sides and to my ear.  Call result, pretty muffled voice.  I'd give the call quality a 5/10.
    Help the phone as I typically do, but covered the mic hole on the back of the phone.  This definatelyimproved call quality.  Was louder and clearer, but not perfect.  I'd rate it at 8/10.
    Help the phone towards the bottom, using my hand to kind of cup the bottom directing the sound to the bottom mic.  This was a further improvement in sound quality.  Rating would be 9/10.
    Help phone as normal, but covered the bottom mic hole.  Very low volume and muffled sound.  Rating a 4/10.
    Talked directly into the bottom of the phone into the bottom mic.  This gave perfect call quality and volume.  Rating a 10/10!
    Talked directly into the mic on the back of the phone. Horrible quality, couldn't hear hardly anything. Rating 0/10.
    Speaker phone on, held the phone up and moved it around as I would normally use a speaker phone.  Call quality was really nice.  Id give it 9/10.
    Speaker phone on, covered back mic hole and used speaker phone as in #7.  Very bad quality, rating 1/10 for call quality.
    Speaker phone on, covered bottom mic and help speaker phone in hand.  Really good quality, even an improvement over test #7.  Would give the call quality a 9.5/10.
    Speaker phone on, placed face down on table.  Volume a bit low, a little muffled.  Call quality 6/10.
    Speaker phone on, place face up on table.  A bit worse than test #10, low volume and a bit muffled.  Call quality is 5/10.
    Based on these tests, I know this problem has nothing to do with the network CDMA connection.  It is obvious that the noise cancellation features are a bit too aggressive, or I have some hardware problem with one or both mics.
    I question wether its really a hardware mic problem, because on non-speaker phone calls, talking directly into the bottom mic gives great quality.  And on Speaker phone, covering the bottom mic makes the speaker phone sound really good.  That's why I think there's something going on with the "Sense Sound" noise cancellation.
    Is anyone else seeing the same issues?  I want to be able to hold the phone normal on a non speaker phone call and get good quality.
    Looking for any tips and advice anyone can give.  Is it worth exchanging for a new one, as I am still in my 14 day window.
    Thanks in advance for the help!

    Here are some other threads that seem to be having similar issues:
    http://forum.xda-developers.com/showthread.php?t=2262648
    http://forum.xda-developers.com/showthread.php?t=2294532

  • Mic problems with all boards thread! What do we do to fix this or do we need a new boa

    I have come the conclusion that this is not just a mic problem but a uni'versal line in problem since several devices can be connected thru my SoundBlaster Li've! 24-bit line in port. I'm assuming its a software problem and it seems to be a common problem. The second possibilty is that part of the board is either defected or assembled incorrectly. Either way everyone seems to have made sure that:
    A. there drivers are up to date.
    B. they have dissabled any other audio device in windows or in BIOS.
    C. there mic won't work no matter what port they attempt.
    D. creative software changes of audio devices and mixer still don't change anything.
    I came on here for answers yet all i find is questions.
    And all seem to be pretty similar. There are many other posts pertaining individual audio cards, yet they all have the same problem. If your having the same problem post here and keep this thread ali've, if you have an answer to your own problems you'd like to share post it here. Hoping for a Creative response to either my post or one of the many other posts on the same subject.Message Edited by syferus on 09-23-2005 0:30 AM

    If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
    If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

  • Mic problem & warrenty issue .

    Hiii
    I have iPhone 4S which is having mic problem i guess.During voice calls the call receiver at other end unable to hear my voice on handset mode but on speaker mode he can hear my voice.
    Also wanted to know in which country my phones warrenty is valid .
    iPhone4S
    Model: MD241LL/A
    Serial No.: DNPHN0Z3DTD6

    Hi Alankar,
    Make sure your iPhone case is not covering the mic. It is on the bottom to the right or left of the connector. Have you tried a call without a case on the phone?
    Your Model Number indicates that this is a US phone, so the warranty would be valid in the US.
    Cheers,
    GB

  • Re: Mic problems

    message me back let me kno some options to fix my mic problems please skype

    wityh me i dont have head phones and only use the mic that the pc always used.i have an hp 2000 laptop with windows 8.1 installed

  • Need some Driver Help / Satellite L775D-S7206

    Getting to be such a common request these days.
     I have a Satellite L775D-S7206 in which the hard drive died.
    I replaced it with a 128G SSD and a new copy of Windows 7.
    I have everything up and running great but I do show one Error and that is on the SM Bus Controller.
    Can someone point me in the right direction to this driver?
      Thanks ! 

    Satellite L775D-S7206
    Best to restore the new drive to the original out-of-the-box contents using Toshiba recovery media. That way you needn't struggle with drivers and utilities. And Windows is preactivated.
    If you failed to burn the recovery discs, you can order them.
       Order Toshiba Recovery Media
    Home Premium already includes Pro and Ultimate, BTW. It's only a matter of unlocking the features.
    -Jerry

  • Satellite L775D

    I turn on the power and it goes to the Toshiba start screen, where i can press f2 or f12. Then the screen goes black and after a second or two the same screen comes on again. It does this over and over and will not go beyond that screen. Can somebody help?

    Hi DerrickStevenson29,
    May I have the model ? ex. SATELLITE L775D-XXXXX
    Have you tried to completely turn off the laptop, unplug the power cord, remove the battery then press hold the power button for at least 20secs to drain the flea power of your laptop. After 20secs install the battery, plugin the power cord then power on your laptop.
    Hope this works for you!
    BTW IF YOU THINK IT HELPS ALOT. PLEASE DONT BE AFRAID TO CLICK KUDOS star ^_^
    - cokies

  • Satellite L775D clock running fast

    Our tech support friends are stumped by this one so I thought I would try polling the "unwashed masses":
    The clock on the Satellite is always running fast, approx 15 minutes every 12 hours regardless of turned on, turned off, sleep, AC plugged in, AC not plugged in.
    So far we have unchecked the automatic sync with internet time.windows and reset the BIOS settings, with no improvement.
    Any thoughts / suggestions?
    TIA  Keith
    Solved!
    Go to Solution.

    Let's start here.
    Keith, open Services (services.msc) and verify that the Windows Time service exists and that Startup Type is set to Manual.
    If it's not started, start it. If it won't start, give us the message.
    If all that's okay, come back for more.
    Also, tell us which Satellite L775D that is and the bitness of Windows.
    -Jerry

Maybe you are looking for

  • Error using multiple email addresses in IMAP account

    Thanks for reading - any help, advice or direction you can offer is very much appreciated! Here is my situation: I use a single IMAP account with several email addresses. If it's important to know, they are all set up as aliases, so I can receive mai

  • Bank details on vendor master record

    Experts, Im trying to enter the same bank account on one vendor upto four times, this is required to enable multiple reference details are used on the BACS. But i cannot enter the same bank account details more than once.... is there a way todo this?

  • Trouble Connecting To My Router.

    Sorry people of Mac. This is actually a question regarding my Windows desktop but I'm asking here since everyone here is so speedy and smart I installed a new Netgear wireless PCI adaptor onto my desktop (the previous one broke). My older adaptor (Be

  • How can i control the DAQ directly from VB

    Actually, it is my first trial to use Visual Basic to get signal from DAQ. And i don't how to interface them. I have read an article to use DataSocket. However, it demostrated the OPC demo in OPC sever only, and so i didn't know how to get the signal

  • Need to find Firefox 10.0.3 ESR.

    I know this link http://www.mozilla.org/en-US/firefox/organizations/all.html is a link for download the latest Firefox ESR (currently 10.0.6), but we need FireFox 10.0.3esr. Where can I download older releases of Firefox ESR?