Satellite P50t-B-104: - WiFi doesen't work well

My new Satellite P50T-B-104 has an Intel dual band wireless-ac 3160 adapter.
Wi-Fi and also Bluetooth is supported by this adapter.
Bluetooth is running well.
On the Wi-Fi side there is no network in the connection list, although in our neighbourhood area there are a lot of private networks.
So first I updated the adapter (now driver 17.0.5.8 from the Intel homepage) but nothing change.
Then I tested it with my smartphone as a mobile Wi-Fi-Hotspot. I only receive a Wi-Fi signal, if the Wi-Fi sender is direct (max 10 cm) near the notebook.
It`s more a NFC than a Wi-Fi functionality.
If I placed the Wi-Fi-Router on the keyboard of the notebook Wi-Fi is running well.
I suppose the Wi-Fi antenna has a failure or does a controller exist to regulate the Wi-Fi sensitivity?

Hi xaver,
there is no difference with or without AC power suply. There is no problem to connect to my router, the problem is the poor possible distance between notebook and my WLAN router.
When you start your WiFi functionality of your notebook for the first time your WiFi adapter present a list with all the possible WLAN networks in your neighbourhood. In my case normaly there must be six oder seven WLAN networks and one of this WLAN networks is my network.
I also tested WLAN functionality with a USB WLAN stick. The stick was automaticly installed and recognize 6 different networks. The integrated WLAN adapter only one, my router and only by a distance of 10cm or closer.
Now I placed the notebook in a distance of 1 meter from my WLAN router. The integrated WLAN adapter doesn't receive any network, the list of the possible WLAN networks for the integrated WLAN adapter is empty, while the wlan usb stick notify all networks.
So I contact Toshiba service to get help.
Gerd
PS: I wrote the reply with the poor wlan connection.

Similar Messages

  • WiFi doesen't work on my new Satellite L850-13Q

    I just bought an Satellite L850-13Q and my WiFi doesen't work. Win 7 64bit and I installed the Atheros driver for this system but it tell There are no aviable connection, but my old computer find a lots of them.
    I turn it on with the FN+F12 keys, and the orange led is light. What can I do?

    Hi
    Did you mean the right indicator?
    There are three LEDs in the front of the notebook.
    The last one (the first from right) is an WLan indicator.
    If this is ON, then the WLan should be enabled.
    The notebooks WLan supports the 802.11 b, g and n standard.
    Is your WLan router configured for b/g or n?
    I think you should additionally try to configure the WLan again.
    Go to control panel -> Network & Sharing center
    On the left choose Manager wireless networks
    Now press Add and configure the new WLan.
    Ensure that you typed right SSID (wlan name), encryption and encryption password

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Win10 update (Satellite NB10-A (PU141)‎ ) wifi does not work

    Hello, I updated to win 10 this morning, and after the installation, i wasnot able to  activate ou to use wifi ! what should i do? Thank you

    What computer do you have, Rachel? Did you install all the Service Station and Windows Update updates before upgrading as well?

  • Ipad Wifi used to work well, but now only near the router.

    I have my Ipad for 6 months now, and it worked very well until last wednesday. The wifi range dropped drastically. I used to have internet all over my house, but now it only works near my time capsule. The other products that I have are working fine without the range issue (1 Imac, 2 MacBooks, 1 Ipod Touch and a 3G Ipad). It didn't happen anything to it, it was working one day and then it stopped (the range fell). I think it's a problem with the antenna, because it doesn't recognize any other area net.
    Did it happen to anyone else?
    I already restored it and the i.o.s is the last one (3.2.2).
    Thank you very much.
    Goncalo

    This sounds like an issue worth taking the iPad to an Apple Retail store and have the function checked to be sure there has not been a hardware failure.

  • I bought a new ipad for my wife and it works well. BUT need help

    Only problem is that when she tries to download a movie or song from itunes it starts downloading and even debit on my credit card so the account is ok but when it finishes downloading it stops and says can t download the movie
    Even for other movies or songs
    But it worked with a book
    Helpppp
    Last model of ipad
    No prob of memory
    Account works and even debited

    The only way they would all come over is if your wife had automatic downloads turned on in her store settings on the phone before she downloaded the apps. A popup for this option also comes up when you first sign into an apple id on the phone in the app store. If she didn't have that setting turned on, she'll have to download them one by one.
    She could also try to sync them over from a computer that has itunes on it

  • IPAD - My Wifi connection was working yesterday at home - today not anymore

    Can anyone please help me with my IPAD. My Wifi connection was working well until yesterday evening. I started to download 2 movies from itunes, went to bed. This morning, only about 20% of first movie was downloaded and I can't join anymore my Wifi net at home. I have reset connections, gave again password and appears "unable to join network". Other computers at home work well. IPAD can connect to wifi in another house/network, and 3 G works fine... Thanks for any idea on how to repair.

    yes, it does. with my macpro and a couple of pc's

  • Satellite P50T-A - Bluetooth not working in Win 8.1

    Since I bought my Toshiba Satellite P50t-A-125 laptop 2 weeks ago I have had problems with the bluetooth. My mouse kept disconnecting and I had to unpair and pair again over and over again to get it to work. The bluetooth device itself in the laptop kept disappearing from the device manager and somehow I managed to get it back again by re-installing the drivers.
    However, now whatever I do I cannot get the bluetooth device to appear again in Device Manager. I have searched for new devices but it doesn't find it. There is now an Unknown USB Device (Device Descriptor Request Failed) showing under USB controllers. I update the drivers but it says they are up to date.
    I have tried searching online and seen lots of people having this issue with Windows 8.1 and all the solutions I've tried don't make a difference. My laptop came with Windows 8.1 pre-installed so I would have thought that Toshiba would have made sure that bluetooth would work under Windows 8.1 before making them available for sale but obviously not.
    Any idea on how to add bluetooth back into device manager?

    Despite restarting my laptop over and over again yesterday and downloading drivers and updates nothing fixed it. I gave up and found an old USB mouse and ignored the bluetooth problem.
    Today, seemingly at random the bluetooth is back in the device manager again even though I did nothing different today than I had already tried yesterday.
    Now that it is back I was able to untick the power management settings of allow the computer to turn off this device to save power(as has been suggested online) and so far (fingers crossed) it has remained stable except for once it stopped working briefly.
    I still don't understand why it vanished from the device manager in the first place or why it has reappeared without doing anything.
    There is clearly something seriously wrong with bluetooth under Windows 8.1

  • Satellite P50T-A-115 after Win8.1 upgrade does not play sound over HDMI

    I have a newly acquired Satellite P50T-A-115, upgraded to win 8.1, all drivers and upodates suggested are installed.
    I get no sound on my home movie system, playing from my laptop, while the video is good.
    The sound comes from the laptop internal speakers.
    There is no other options than my internal loud speakers in the control panel.
    I have seen similar questions for other laptops, but have not found suggestions useful.
    Does anyone get this to work on a P50T-A-115 ?

    Please check this thread
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74149
    There was a similar discussion and issue could be solved by installing and updating the drivers in the right order and uninstalling the Intel WiDi as suggested by Toshiba.
    Feedback would be appreciated.

  • Satellite P50T-A016. how to disable edge swipe gestures

    Hello,
    I have Satellite P50T-A016 laptop runing windows 8.1 and I'm attempting to turn off the charm bar. After researching various websites/forums, it appears the charm bar is hardwired into windows and Microsoft provides no option to turn it off directly.
    These websites/fourms also suggest disabling edge swipes gestures will indirectly turn-off the charm bar.
    After I de-select "control pannel -> mouse -> enable edge swipes" and reboot the laptop, edge swipes are still being detected.
    Why is edge switpes still enabled?
    How to disable edge swipes?
    Regards
    Graham

    > I have looked at the link. It is address multifinger gestures and sensitivity. I also noticed that the link leaves the "Enable edge swipes" option selected. So I'm not sure how this link helps.
    The link and the HowTO helps you to find the touchpad Synaptics settings!
    It shows you where to disable or enable settings which would be also related to the touchpad edge swipes.
    > Regarding the charm bar, as a desktop mode user of windows I don't use it. The only time I have used it is when I have inadvertently turn it on when I switch between mouse (default), touchpad and touschscreen. It just get in the way even when hot corners are disabled.
    Well, buddy you are not alone with this opinion but this is how it works and Microsoft decided to design the Win 8/8.1 system in this way
    > When the "Enable edge swipes" option deselected then right-edge gesture on the touchpad no longer triggers the charm bar opening. Great!,
    Thats right and this is how it works
    > However, the right-edge gesture on the touchscreen is still enabled.
    Dont mix touchpad with the touchscreen! The edge swipe settings in touchpad are NOT related to touchscreen!

  • Intermittent touchscreen support on Satellite P50T-A-10U

    I purchased the above laptop Satellite P50t-A-10U at the weekend, and I have managed to see the touch screen work twice, once it works it'll work perfectly until shutdown/restart, but 90% of the time it doesn't respond to touch input (I must have restarted it around 20-30 times).
    Windows acknowledges it's touch capable, but the setup/calibrate options in "Tablet PC settings" don't respond to input most of the time.
    The only thing in the event log says "A multi-touch device reported inconsistent contact information".
    I've updated all the drivers I can find, currently running Windows 8.1 but it didn't work out of the box either (with Windows 8.0).
    Is this a hardware issue or just dodgy drivers?

    It seems that you are the first who has shared such issue here in the community.
    Because Im not quite sure if its software or hardware related problem, I would recommend you to reset the system back to factory settings.
    How?
    Take a look onto this doc:
    [Windows 8 Recovery & Repair|http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]
    By the way: What BIOS version is available on your notebook?
    I found on Toshiba EU driver page new BIOS (v1.30) ready for download.

  • Satellite P50T-A-125 - Wi-Fi Connectivity issues

    I am having major issues connecting to WiFi with a Satellite P50t-A-125 laptop.
    We have 3 of these laptops in the house, but only having WiFi connectivity problems with one of them.
    It doesn't matter where the laptop is located (i.e. house, hotel, overseas etc ), the problem is the same.
    It will connect to the WiFi local 'hot spot' / hub, but will not connect to the internet and the "limited connectivity" message comes up.
    This is a very annoying and time consuming problem, any help or advice in resolving it would be greatly appreciated.
    Best regards - SSG.

    Hi
    I think you should start with WLan driver update.
    Mostly such limited connection issues could be solved by Wlan driver updates.
    From my knowledge the notebook was equipped with Intel Wireless-N 7260 Plus Bluetooth Wlan card
    The newest driver for this Intel page could be downloaded from Intel website:
    [Intel Wireless-N 7260|https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+ Networking&ProductLine=Intel%C2%AE+Wi-Fi+Products&ProductProduct=Intel%C2%AE+Wireless-N+7260&ProdId=3713&LineId=1784&FamilyId=1783]
    Feedback appreciated

  • Iphone 6 plus wifi connection not working

    I don't know what the deal is but, I'm getting notifications of emails, and messages but when I go to the app I have nothing there. The problem has expanded and now apps aren't connecting to any wifi. I thought it might have been 3rd party apps, but now even the app store cannot connect. I've tried my home wifi, and my work wifi. Using my data plan, I have no problems connecting to anything. I'm thinking this is an IOS8 issue that needs a patch. If somebody has any other suggestions, I'm all ears!

    Nore wrote:
    I have always used the iPhone's LED flashing alert to notify me when I get a call or text message. While I was on iOS 8 Beta 2-4 it was working fine. I did a clean install of the complete iOS 8 release and ever since then, the flash alert doesn't work.
    Sometimes it will work on incoming calls, but will not work on text messages. I've tried soft/hard rebooting, clean wipe and fresh installs, and pretty much anything in between. Now, today I got my 128GB Gold ATT iPhone 6 Plus, and it's the same thing. Updated to iOS 8.1, reset everything/deleted all contents and settings. Both fresh install, and iCloud backups and still no alerts on text messages, but now I get them on calls. I tried my girls ATT 128GB iPhone 6 and she has the same problem too. My old phone was a 64GB iPhone 5S and hers was a 32GB iPhone 5. Everything was good until the official release of iOS 8.
    I've tried searching for related issues, and haven't found anything since 2011 with a quick Google search. Most links just tell you how to turn the flash alert on but no new issues. All of my devices are on iOS 8.1.  I gave my father my 64GB 5S with a clean install and he still has the issue as well. So, that makes my iPhone 6 Plus, my girls iPhone 6 and my fathers iPhone 5S not flashing LED on messages and sometimes calls. There aren't any custom vibrations enabled on any if the devices. Has anyone else experienced this problem? Is it a known bug or am I just not doing something right here? i never had an issue before the iOS 8 release. Any help would be appreciated.
    Are you a developer?  IF so try asking in the developer forum.

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

Maybe you are looking for