Satellite Pro C650, Boots OK, after Windows starts up the screen goes white

Hi,
I have a Satellite Pro C650.
It boot fine.
I can see Windows starting up - after startup - the screen goes completely white.
Has anyone seen this?
Am geussing it might be a loose display connection - but I the screen displays the startup sequence and initial windows startup.
Regards,
eeiddne

Hi
I dont think your display is faulty.
What happens if you access the BIOS at the beginning?
To access the BIOS press F2 while powering on the unit.
Access the BIOS and keep it running for some minutes and check if the display will turn to white.
Additionally its advisable to connect an external monitor and to output the display to the 2nd screen. If the 2nd screen would not be OK, then the graphic chip might be the troublemaker.

Similar Messages

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?

Hey ppl,my macbook is not booting and by that i mean u can hear the audio wave when its starting up,the screen goes white and then after a while there's a folder with a question mark in the middle of the screen...anyone,any ideea?!?Regards.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the optical drive.
Once it has finished booting and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

IPad 2 turns on then after a few seconds the screen goes black

IiPad 2 turns on then after a few seconds the screen goes black.

Hi Tsinker,
I'm sorry to hear you are having issues with your iPad. If your iPad isn't responding or starting up successfully, you may find the troubleshooting steps outlined in the following article helpful:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden

HT202159 Problem with Update on It started, then the screen went white and the icons for the apps on the desktop were all blackened, 'waiting'. What now?

It showed a number of apps to be updated on my iPad, so I clicked 'update all' as usual. It started, then the screen went white. The icons for the apps on the desktop went black, as they do, with the first one half way around the little circle timer, and two marked 'waiting', with others not that far into the process. They all stopped. Now I can't stop the update process in the App Store, or use any of the apps. What do I do next? Help, please!

Hello there, Rev Susi.
From what I can gather you have a few apps that only display "Waiting". The following is a past discussion that dealt with a similar issue, the answer may help you as well:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

After updating my iOS the display goes white after I end a call or if I get a missed call?

After updating my iOS the display goes white after I end a call or if I get a missed call?

Did you reset your phone like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
If that didn't help I suggest having a technician examine your phone. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

My Mac book pro has the end of a earphone stuck to it. After this I updated to maverick, and this massively slowed down my computer.Now my laptop is switching on and logging in just fine, but after logging in the screen goes white. What can the reason be?

At first my laptop was fine after the earphone end got stuck in. Soon it started getting slower, and suddenly it stopped switching on. The people in the service station said that it wAs because the hard disk drive was corrupted. I came back home, and immediately it stopped working again. This time they said it was because of water spill. They changed the entire key board and then it started working for a while. Later I updated to maverick and that slowed down my computer. Once, I switched on my laptop, logged in, and then the screen went white. When we took it to the service center they said they will need to replace the hard disk. I am not sure what I should do. Any suggestions?

Liquid damage from water spill is progressive, unfortunately.
Best.

Hi, I accidentally spilled water on my Mac Air on the very right side of the keyboard. After a few minutes, the screen turned white and a gray folder with a question mark came up and kept flashing. THEN IT DIED HELP.

After the screen turned white and the folder popped up, it just kept flashing. After a few minutes the screen just turned white completely and I could hear the noise of the drive. It just sat there still with the noise for a good few hours until the battery died and then my mac just shut down completely. I tried to see if the computer could charge, and it does charge. I just can not turn the computer on no matter what. It is dead. It might be the logic board or the drive...I'm hoping it won't cost me a new computer because I just got this 5 months ago....

Do not attempt to charge as that will only make the damage worse. You need to take the MacBook Air to an Apple store genius bar and have the technicians check and see what repair work is necessary. It only takes a very small amount of liquid to cause short circuits and damage.

The screen on my ipod nano 2nd generation turns black. It still plays music. I've tried resetting the ipod to clear the black screen and the screen goes back to it's normal state but after a few minutes the screen goes black again.

The screen on my ipod nano, 2nd generation, turns black. It stills plays music. I've tried resetting the ipod to clear the black and the screen goes back to it's original state. But after a few minutes the screen turns black again, while the music is still playing. What can I do about this?

That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
B-rock

HT201177 I get a chime and white screen, but after a few minutes the screen goes black. Help!

I came out to a black computer screen. I can see the mouse arrow but otherwise nothing. I disconnected the computer and tried turning it back on. It starts up like usual but bar going across under the apple freezes and the screen goes black. I can hear the computer running. Help!

That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
B-rock

Satellite Pro L40 - Sound Driver after Windows XP SP3 Install

Hi,
I had bought the Satellite Pro L40 about 6 months ago and the speed of the laptop was too slow with windows Vista. So I decided to install an old copy of windows XP that I had bought earlier. I upgraded the windows installation to SP3 before installing all the drivers.
Now all the drivers have been installed properly except the sound driver. I downloaded the XP version of the driver from the toshiba website but it did not work. So I though maybe the vista version would work, so I downloaded that. But that didn't work either.
Can anyone suggest a solution where I can get the sound driver to work? Preferably without having to get the windows reinstalled again.
Please help me out...!
Thanks

hi there,
Try reinstalling the soundcard driver for XP; Just go here -- > [Realtek Soundcard Driver fo XP|http://support1.toshiba-tro.de/tedd-files2/0/sound-20071120150900.zip]
Hope this helps :)
Message was edited by: iSkO

Satellite Pro U200 - No sound after Windows 7 installation

Hi,
I'm having a problem with the sound after installing Windows 7 on a Satelite Pro U200 (PLUA1E). No Win7 sound driver found on the Nordic driver website. Please help.
G.Magnason

Hi buddy,
Have you already checked the Toshiba website itself?
http://eu.computers.toshiba-europe.com
I found a sound driver for Vista 32bit and the most Vista drivers also work on Windows 7 so its worth a try!!! :)

I installed and performed the Migration Assistant to transfer all my files and documents from my PC to iMac. Nothing shows up in Finder on imac but Boot Camp Assistant window is on the screen. What is it, is it necessary, how do I proceed?

I installed and ran Migration Assistant on my PC to tranfere files and documents to my iMac. The process seemed to go as directed until the end when "Boot Camp Assistant" showed up on my iMac screen. There was no mention of this in the Migration Assistant info. It seems I cannot proceed without it. What is it for, is it required, what is the process?

I installed and ran Migration Assistant on my PC to tranfere files and documents to my iMac. The process seemed to go as directed until the end when "Boot Camp Assistant" showed up on my iMac screen. There was no mention of this in the Migration Assistant info. It seems I cannot proceed without it. What is it for, is it required, what is the process?

I am using Windows 7 and the screen goes blank like like it went to sleep, what can I do?

pavilian slim line s5-1120 pc

I had this same issue on my PC but resetting the Video Card driver, or user Login, etc did nto work. I booted up in Safe Mode and then tried to look at Windows Event Log and found that it was not running. I must have had a virus because it turns out that 95% of the Windows Services were DISABLED on my PC. I ran a Full AV Scan and a Full Malware Scan, then I had to go through and manually start all of the needed Windows Services one by one. I made good educated guesses as to which ones NEEDED to be running versus which ones I could get back to later. Some of them still needed to be started again after I rebooted for certain functionality but at least I was able to do so in standard boot up. Hopefully this helps. others since I was looking around online in a dozen different forums before I checked the Services on a hunch.

Satellite Pro C650, Boots OK, after Windows starts up the screen goes white

Similar Messages

Maybe you are looking for