Satellite Pro C650 - Which startup programs can I disable?

After about two weeks with a new Satellite Pro C650 that I bought for my wife, a lightweight user, she is about to throw it at me.
Everything runs slowly. Click start: wait. Open the Control Panel: wait. The wait time is in the range of 20 - 30 seconds. Internet is often slower - especially Internet Explorer, which often goes into a Not Responding state. (Google Chrome performs better although it's not great either) Steps taken so far include a defrag of the C: drive, which was 5% defragmented. I ran a troubleshooting scan off of the Control Panel and it informs me that I have loads of programs running on start-up and suggests I disable some. I had read previously that this is a problem with this Toshiba.
The question then is what to disable? I don't know what most of the programs are or what they do. I'll list the programs here and then gladly take suggestions. By the way, BitDefender was listed three times in the start-up list. I disabled two of them for what it's worth.
The only apps I downloaded were BitDefender and Adobe Acrobat. McAfee antivirus has been removed. Other laptops in the house work fine with the same wireless broadband connection. Hoping someone can help out and tell me what I can disable.
The Start-up list:
SAIICpl Application
Synaptics Pointing Device Driver
Message Center
SmartFaceVWatcher
Catalyst Control Center
Nero BackItUp
Default Manager
BitDefender 2011 (listed three times)
Adobe Acrobat
Adobe Reader and Acrobat Manager
All of these Toshiba applications:
- Power Saver
- Zooming Utility
- Flash Cards
- ReelTime
- TEMPRO
- HDD SSD Alert
- Volume Regulators
- Notebook Registration
- Service Station
- Web Camera Application
Thanks.
Malahideroad

Hi
First of all you can find out yourself what the single applications do and what are controlled by these apps use google to get more details.
But Nero BackItUp, Adobe Acrobat, Adobe Reader and Acrobat Manager can be disabled wihotu having any problems with the notebook
TEMPRO is a Toshiba tool which scans the systems and provides info about new Toshiba driver updates
Its your own personal decision if you want to use it or not
Notebook Registration helps you to register the notebooks warranty and Service Station provides some option to optimize the notebooks performance but its nice to have but its not very important

Similar Messages

  • Satellite Pro C650 - Audio keeps cutting out

    Hi Guys,
    I have searched high and low for the answer to this and its driving me insane. I really hope you guys can help me out!
    I have a Toshiba Satellite Pro C650 01301J laptop running Windows 7 Professional 32Bit. I try and listen to music either through spotify or simply using my library of music in Windows Media Player,
    however after a while the audio cuts out. It isnt muted in mixer and the song keeps playing as if nothing has happened, except I cant hear anything.
    This is fixed when I mute and unmute or turn the volume up or down using the fn keys.
    When I first start up the music it will take 5 minutes or so before it happens, however once it starts it will cut out every 10 seconds or so. This gets extremely annoying and I am convinced there must be a solution.
    My audio driver is Conexant CX20671 SmartAudio HD version 4.119.0.61. I have tried deleting this and reinstalling it, downloading an older driver and updating it. It tells me it is the latest driver but its still not solved the problem.
    Has this happened to anyone else? Is there another driver I could try or perhaps a program that is causing it?
    I would really appreciate your help on this as its driving me crazy being unable to listen to any form of music without having it cut out every 10 seconds...

    Hi guys - thanks for your help and I sincerely apologise for the delay in my response!
    Truthfully, I was so busy when I wrote this I forgot that it happened and all this time later I was googling solutions tot he problem again and came across this post - I thought "Wow this guy is having the EXACT same problem as me!" - Then I saw my name next to it.
    Ok, responses:
    Silas - The problem has happened since day 1. I tried to reinstall the value added package but no change.
    MasterG - I have not muddled with my system and it has always happened so I think its a software/hardware fault... The sound works perfect through headphones though...
    Neion - Sorry to hear that bud!
    PauPau - Sound driver update doesnt work, headphone did work, usage of different players has no effect and havent tried system recovery as yet as it has always happened...
    Still searching for an answer and, again, I apologise for not getting back to you sooner when you were trying to help me!
    Thanks Guys,
    Luke

  • Satellite Pro C650 - HDD issue - need new one

    Satellite Pro C650 Model Number: PSC09A-01V021
    Smart Disk reports a unspecified HDD problem & recommends backup (done) & HDD replacement.
    It runs so slow it is unusable. Warranty has expired so I wish to replace the HDD myself.
    The faulty drive is a Toshiba 320gig MK3265gsxn.
    I'm looking at a 500G WD 16M 7200RPM SATA 2.5Inch Scorpio WD5000BPKX as replacement/upgrade.
    I assume the new drive will be detected/setup by BIOS but I don't know if the recovery disks will work with this Western Dig, larger & faster drive. Can anyone advise please?
    Recovery Disk questions.
    When I made the recovery disks using Toshiba Recovery Media Creator the program suggested marking the first few disks as Recovery Disk 1, 2 & so on. I assume these disks are my user data backup. Yes/No?
    The last disk made was called Windows Recovery Environment-64bit. This is the factory default backup & is to be installed first?
    Will it transfer the Recovery Partition & install Windows on the new disk?
    Thanks,
    GJL.

    Now when you need to exchange HDD I recommend you to exchange it with SSD. It costs a bit more but believe me notebooks performance will be much better. Ive made the same and Im so happy.
    Notebook starts faster and operate much better.
    Recovery image disc is back-up of original recovery image and it has nothing to do with your personal settings.
    When you install it notebook will have factory settings again and it will be identical situation when you have started your notebook for the first time.
    In my opinion there should not be any problem to use created discs with new HDD. Generally speaking there is no some limitation and you can use different HDDs.
    Anyway, think about SSD.

  • Satellite Pro C650, Boots OK, after Windows starts up the screen goes white

    Hi,
    I have a Satellite Pro C650.
    It boot fine.
    I can see Windows starting up - after startup - the screen goes completely white.
    Has anyone seen this?
    Am geussing it might be a loose display connection - but I the screen displays the startup sequence and initial windows startup.
    Regards,
    eeiddne

    Hi
    I dont think your display is faulty.
    What happens if you access the BIOS at the beginning?
    To access the BIOS press F2 while powering on the unit.
    Access the BIOS and keep it running for some minutes and check if the display will turn to white.
    Additionally its advisable to connect an external monitor and to output the display to the 2nd screen. If the 2nd screen would not be OK, then the graphic chip might be the troublemaker.

  • My Satellite Pro C650 doesn't start or charge

    Hi,
    can someone please help me?!
    I just purchased my Toshiba Satellite Pro C650.
    Charged it for 16 hours, set it up and after restarting it went off and now it doesn't turn on of charge at all.

    Hi
    Remove the batter and disconnect the AC adaptor.
    Then wait some hours and connected both parts to the notebook again.
    Then try to power up the unit.
    If this will not help you, then I would recommend asking a notebook technician for an check. If there is no sign of life, then a serious hardware problem might be possible.

  • Satellite Pro C650 - arrow, slash, and z keys are not working

    Can any one help - my slash keys, arrow keys, z and question marks have stopped working.
    I have seen several other posts on various forums for exactly the same combination of keys.
    I have a Satellite Pro C650.

    Sounds like a keyboard malfunction.
    Can you use the external USB keyboard properly?
    If you did not notice the same problems using external keyboard, then I would recommend replacing the internal keyboard.

  • Satellite Pro C650 - motherboard is dead

    Hi
    1st post but here goes.
    Owned Satellite Pro C650 for a year now and a wek ago just started smoking then went off.
    I checked with my warranty & ran out on Sep 30.
    Now my problem is i cannot seem to find info on the mobo that is inside.
    I have not open or anything but where you put RAM chips you can see clearly a little square chip burnt.
    So i would like to ask is this a common fault.
    Also the model number of mobo so maybe i could get a replacement.
    Think thats all
    thanks for any replies

    Hi
    > I checked with my warranty & ran out on Sep 30.
    This is really a bad luck Its pity that your warranty ran out just before the motherboard died.
    It sounds like an overheating issue
    What to say in your case the motherboard needs to be replaced and a new part could be ordered from Toshiba ASP in your country.
    But new motherboard is expensiveits one of the expensive notebook parts beside the notebooks display so not sure if its worth to replace the mobo in your case
    However, you can ask the ASP technician for a opinion maybe you could get an second hand part

  • External USB Hub limit for Satellite Pro C650

    Is there a limit to how many external usb ports you can connect through the Satellite Pro C650?
    Wtih the four port hub I have, the ports seem to work individually and all devices work normally when plugged directly into the lap top, but when all devices are plugged into the hub and lap top combined, there are errors coming up.
    Thanks,
    Karyn

    Well, I think this should not be a problem if the single USB hubs provide own power.
    The point is that the single USB port provides common 500mA and if more devices would share the power from one USB port then it could be possible that the available 500mA would not be enough for all USB devices.

  • Information on enabled services and which ones I can safely disable

    Where is a good source of infomation for all of the enabled services (what they do, etc) and which ones I can safely disable. i.e. seaport.

    Opt back in and then immediately back out (yes I know this sounds daft)
    Leave you hub on 24/7 and it should deactivate as said with in 48 hours.
    Don't reset the hub after doing this, as it always puts BTWifi back on!
    fwiw, you should see this on the hub event log as the hub gets the btwifi disabled update
    10:40:51, 01 Feb.    (33980.780000) CWMP: session completed successfully
    10:40:45, 01 Feb.    (33974.620000) CWMP: Set Parameter by TR069 Success
    10:40:45, 01 Feb.    (33974.620000) BT WiFi disabled via TR69
    10:40:44, 01 Feb.    (33974.070000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
    -+-No longer a forum member-+-

  • Satellite Pro U200 - Which image viewer is preinstalled on Vista?

    hi
    Which Image Viewer will be preinstalled on Vista Business from Satellite Pro U200 PLUA1E-02802QS4?

    Hi
    Im not Satellite Pro U200 owner but I assume the normal Windows image viewer is installed.
    But I dont understand the reason of your question. You can install and uninstall what you want so doesnt be worry about this! ;)

  • Satellite Pro C650: Questions regarding Recovery disk installation

    Hi
    can someone please give me a little bit of help?
    I am having to buy and install a recovery disk for my Sat Pro C650.
    When I get it do i just plug in and play it. I have also lost windows 7 which was pre-installed, or would I then need to also buy a new copy of windows 7 and install that too?
    Will it then just go back to how it was when we brought it.
    Or do I need to do something else after the recovery disk is installed.
    Thanks
    Tina

    Hi Tina and welcome to our Toshiba community.
    Here is my comment to your posting:
    Every new Toshiba notebook is delivered with original preinstalled operating system and saved recovery image on HDD. There are two possibilities for OS installation:
    -usage of HDD recovery installation and
    -usage of recovery DVD that must be created by notebook owner.
    Toshiba recommends creation of DVD disc. Why? If something goes wrong with HDD (defective) you can built-in new HDD and use recovery disc to have factory settings again. So please, if possible, create this recovery disc as soon as possible.
    Back to your questions:
    > When I get it do I just plug in and play it. I have also lost windows 7 which was pre-installed, or would I then need to also buy a new copy of windows 7 and install that too?
    Usage of DVD is simply:
    Start your notebook and press F12 to enter boot options menu
    Put recovery DVD into optical disc drive
    Choose CD/DVD device on the menu and press ENTER
    Follow what happen on the screen
    > Will it then just go back to how it was when we brought it.
    Yes.
    > Or do I need to do something else after the recovery disk is installed.
    No. Everything will be installed automatically.
    If you have more questions you are welcome.

  • Satellite Pro A300D-161 why i can't download the latest Bios from Toshiba

    Hi,
    i want your help because i can't download the latest Bios for my notebook from toshiba-europe support page.
    Either internet expoler 8, either firefox can't open the Bios download page.
    Why is that problem? Is thre anyway to fix it?
    Does anyone has the same problem with me?
    Note: I'm using windows xp and the version of the bios is *3.10*v dated +30/4/2009+.
    Thanks in advance and sorry for my english, mike.

    Hi!
    I agree with you and Jimi.
    I have tried to download the BIOS for Satellite Pro A300D but it doesnt work at the moment :(
    But I think Toshiba will fix this problem as fast as possible. Try it 1 or 2 days later.
    Why do you want to update the BIOS? Do you have an issue?
    Bye

  • BIOS update issue on Satellite Pro L40-15A - Old BIOS can't recognise EEPROM

    Hi
    I'm having trouble flashing my bios.
    I have a Satellite Pro L40-15A.
    The Toshiba winflash tool that comes with the bios file tells me that the 'Old BIOS can't recognise EEPROM'
    I was recommended to use AFUDOS on another forum but that tells me the bios has an invalid boot block.
    AMI flas for dos tells me the flash rom is write-protected??? There is no option in bios to disable it and I don't think anyone would be dumb enough to put a hardware Bios protect jumper on a laptop.
    Please help
    Thx

    Hi and thanks for reply
    The 5.10 bios update is only for XP laptops, my one came with windows vista installed so I need v2.20
    "old BIOS cannot recognise EEPROM" is the error message i get when i try to flash the bios with the supplied software from Toshiba
    _+UPDATE:+_
    New verion of BIOS update has worked!!
    Case could be closed

  • Satellite Pro A120 - What Toshiba processes can be excluded from start-up?

    My old A120 has over 50 processes showing in Task Manager before I even open a browser or any other application.
    This seems far too many for a machine with a 1.46 GB processor (and half a gig of RAM).
    Many of them are Toshiba processes, and look worryingly as if they are associated with hardware operation.
    Is there a list anywhere of Toshiba processes which can safely be turned off - and which advises how to do this?

    Hi
    Every notebook has preinstalled different software and therefore different processes are running in the background of the OS.
    There is no general answer what processes could be disabled.
    Fact is that Toshiba notebook supports many different additional features which need the additional software.
    If you dont want to use features like FN buttons, Toshiba control buttons, etc then you could disable the process responsible for this feature.
    If you dont know exactly what a certain process do, then goggle simply for some details. There are many websites with different database which includes information about Windows background processes.
    Then you could access the MSCONFIG and in the Startup tab you could disable some processes just for testing.
    In worst case if something would not work you could enable it again.
    Cheers

  • Satellite Pro C650: Win 7 cannot format new SSD

    I brougth a Toshiba laptop satelite pro C650 with win 7 preinstalled, I have tried to insert a faster SSD harddrive and here comes my problem:
    The preinstalled win7 cannot format the harddrive and reinstall WIN7, I need the cd, so what do i do?.

    If you look in your user manual there will be a system recovery options in the index detailing how you create and use recovery DVD's. As far as I know it will allow you to reinstall W7 if your hard drive had failed so I'd try the recovery disc route but I wouldn't have you current "master" hdd connected so that If it fails nothing has been lost.
    I would expect that Acronis backup software would allow you to back up W7 and write it back to a new hdd. EaseUS home backup is free and claims "such as one-click restore system to dissimilar hardware " - external usb HDD also needed?
    (don't forget you must know a username/password that has admin rights)

Maybe you are looking for

  • Error during import. Please HELP!

    Hello All, We want to export / import some page groups and are faced with the following situation. We were able to get the transport set of the page group from the source and create the dmp file using the command: File.cmd -mode export -s portal -p <

  • Why did my index.htm file generate blank? and other weirdness.

    Here's the story. Maybe someone can tell me where I made my mistake, or what happened. I'm numbering the steps for convenience in discussing this. 1) I started a new project, a WebHelp project. 2) I imported content in Word. 3) I created an index, gl

  • Crystal Report: Save a Crystal Report to BW, no Roles found

    Integrating BusinessObjects Enterprise and BW: - Some configuration works have been done - Crystal Report can connect to BW when [Save a Crystal Report to BW], then Connect to BW, Dialog "Save a Crystal Report to BW" show up, but in Roles Description

  • BADI / User Exit after Saving of Business Partner

    Hi Experts, Is there a BADI / user exit that is triggered after saving / updating of Business Partner using transaction code "BP"? We want to send a XML file thru ALE after creation/modification of BP. We are using CRM WinClient 4.0. Thanks.

  • SMQ1 NOSEND Status

    Hi, I am performing delta on the datasource 0CRM_SALES_ORDER_I from CRM system into BW. Although delta records are flowing into BW, the queue from SMQ1 in CRM system is not getting cleared. The queue remains in the status NOSEND. How do I clear the q