Says I am connecte to a wifi network but can't access anything on Safari or open any apps. Help!!!

For the past few weeks since I have updated to ios 6 I am not able to open any apps (Facebook, Twitter, App Store, Instagram) and my Safari will not open any pages. It loads and loads then a message shows up saying "Safari could no open the webpage becuase the server stopped responding." I have tried everything including Resetting the Network as well as a full reset of my ipad (done at the apple store). I am still having the same issues. If someone could please help me with this as this is getting extremely frustrating! My Iphone 4 is having the same issue as well. But when it comes to WIFI at other locations it seems to be fine, only at home is where I am having this issue.

I just bought a new wireless router/modem from my internet provide (Shaw) and I'm still having the same issue. My laptop is working fine. It's only the iphone 4 and ipad 2 I'm having issues with.

Similar Messages

My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.

My ipod touch 4th gen shows that it is connected to a wifi network but when i try to browse safari it doesnt work.please help me out.
I am using wifi from a mobile by using the tethering option.

Hi there amalrockzz,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Unable to access the Internet while connected to Wi-Fi
If you're using a public or commercial network, you may need to log in or subscribe.
Check to see if you have a self-assigned IP address:
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected and tap .
If your IP address is 169.254.xxx.xxx, you may not be able to access the Internet.
If you do not have a self-assigned IP address, see if other Wi-Fi devices on your network have Internet access.
If they do not, consult with your network administrator or ISP for further assistance.
If they do, reset network settings on your device by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Additional Information
Find information on connecting to a Wi-Fi network.
Some third-party routers may not be compatible with all iOS devices, even after updating to the latest firmware. If your iOS devices can successfully connect to other Wi-Fi networks, contact your router's manufacturer to ensure that your router is compatible with your iOS device.
See recommended settings for configuring your Wi-Fi router for use with iOS devices.
-Griff W.

IPhone connects to secured WiFi network, but can't access Internet

Problem: iPhone connects to my secured home WiFi network, shows WiFi strength bars at top of screen, displays checkmark, lock, power, and blue arrow on WiFi Networks screen; however, cannot access Internet, iTunes store, stocks, Weather or anything else.
Tests I've run:
1. iPhone itself:
---DCHP:
IP Address = 192.168.2.102 (within range automatically allocated by LinkSys router--see below)
Subnet Mask = 255.255.255.0 (as per LinkSys router)
Router = 192.168.2.1 (as per LinkSys router)
DNS = 192.168.2.1 (confirmed by Apple as a valid DNS address given the above information)
Tests:
*Forget Network and rejoin--Failed to connect to Internet
*Forget Network, reboot iPhone, and rejoin--Failed to connect to Internet
*Reset Netowrk Settings and rejoin--Failed to connect to Internet
*Reset All Settings and rejoin--Failed to connect to Internet
*Deleted DNS entry--Failed to connect to Internet
*Connect to Apple Store unsecured network--Success
*Complete reset of iPhone at Apple Store:
**Brought home, made no calls, did not sync with iTunes, did not reenter any info deleted by complete reset, joined network--Failed to connect to Internet
**Synced data previously saved to iTunes, rejoined network--Failed to connect to Internet
2. LinkSys router WRT310N:
Tests:
*Updated Router firmware--iPhone failed to connect to Internet
*Entered a Static IP address on both router and iPhone--iPhone failed to connect to Internet
*Reserved an IP within range automatically allocated by LinkSys router--iPhone failed to connect to Internet
*Reserved an IP outside range automatically allocated by LinkSys router--iPhone failed to connect to Internet
*Forced MAC filtering to use iPhone WiFi Address--iPhone failed to connect to Internet
*Disabled all MAC filtering--iPhone failed to connect to Internet
*Changed security settings:
**No Security--Success
**WAP Personal (AES)--iPhone failed to connect to Internet
**WAP Personal 2 (auto selection AES or TKIP)--iPhone failed to connect to Internet
**WAP Personal 2 (forced AES)--iPhone failed to connect to Internet
**WAP Personal 2 (forced TKIP)--iPhone failed to connect to Internet
*Changed security WAP Password/Passphrase:
**10 characters (alpha numeric)--iPhone failed to connect to Internet
**12 characters (alpha numeric)--iPhone failed to connect to Internet
**10 characters (alpha numeric/ Uppercase alpha)--iPhone failed to connect to Internet
**10 characters (alpha numeric/ Lowercase alpha)--iPhone failed to connect to Internet
**10 characters (all numeric)--iPhone failed to connect to Internet
*Set router to Mixed Wireless N/G/B Network Mode--iPhone failed to connect to Internet
*Changed network radio band from Auto to Wide to Standard--iPhone failed to connect to Internet each time
*Set router to Wireless G Only Network Mode--iPhone failed to connect to Internet
*Changed Router IP address from 198.168.2.1 to 198.168.1.1 (LinkSys default)--iPhone failed to connect to Internet
3. Microsoft router MN-500:
Tried this old router (the one I used before purchasing the LinkSys). It is an old (circa 2002) Wireless B base station with WEP Security. The iPhone was never able to connect to the Internet using various settings, many of which were duplicates of the LinkSys tests above.
On both routers my wife's Dell laptop and my HP printer connect without incident, using the same network/security settings.
I have always been able to connect to various unsecured WiFi networks; I have never been able to connect to a secure WiFi network (although the only one I've really tried has been my own).
I am at a loss as to what to do next. Any suggestions?

SUCCESS!!!!!
I visited my brother-in-law yesterday and attempted to connect with his secure network. By sheer luck, he is using the exact same model LinkSys router. My iPhone connected first time--so the iPhone was eliminated as a source of the problem.
I didn't do a lot of troubleshooting at his house, but I did notice that his network was set for both dynamic DHCP and dynamic DNS. I know that either or both of Windstream (my ISP) and my broadband modem requires a pair of static DNS addresses.
Sure enough, delving real deep into Windstream's support site, I discovered a LinkSys router DNS help page, specifying how to set static DNS addresses in LinkSys routers. I then accessed my router, enterd the known static addresses, saved the router settings, then rebooted the iPhone and connected to the network.
SUCCESS!!!
Thanks to Jane, who suggested it was an ISP issue, Jason, and all at Apple support. dumonj, I'll email you directly. Try this suggestion and see if it helps.

IPhone 5s can connect to wireless WIFI router but can not access internet.

iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
TIA
Rich

You IT person should be able to sort this out. But, they seems to be too busy or disinterested to do this. Suggest you provide the it person with an iPhone to get interested.
Any could be lots of things.
The best you can do is to get access to the admin setup for networking on a pc? The internet settings are all the same. Only what names the manufactures change from OS to OS. Check and compare parameters.
Phone works to internet at home, I assume?

It says im connected t a wifi network but when i go to safari it says im offline, it says im connected t a wifi network but when i go to safari it says im offline

it says im connected to a wifi network but when i go to safari it tells meim offline

Despite the WiFi sign you may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

My Apple Tv is connecting to the Wifi network but is not connect to the internet. So when I look for it on my Airplay it doesn't come up. I have 3 other ones already working on the network and they are all fine.

My apple TV is finding and connecting to the Wifi network but then says it is not connected to the internet and then I cannot find it on the iPad through airplay. I don't want it connected to the internet (as in www.) because for the use I have I only need to use the Apple tvs locally in a sports hall as scoreboards. I have 3 others working on the same router and they are working fine (as of yesterday)
On my screen I see (obviously not written like this)
network connect- yes
signal strength- fine
Ip address- fine
DCN- fine
Activation- Failed
This is the only negative I can find and the statement that the Apple TV has connected to the wifi but is not connected to the internet.
Where has it gone wrong for me. Please help

It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks

I am able to connect to my wifi network but am not able to connect to other computers on my network

I am able to connect to my wifi network but am not able to connect to other computers on my network. I have installed windows 7 on parallels desktop, from windows i am able to access my network computers. But from Mac i can only access internet but not network computers Please help

Ok, well if you're sure that there are shared folders on your PC's, then try this:
Click somewhere on desktop, so you're in finder > Go > Connect to Server (shortcut to all of this is Command + K) then type in: smb://ipaddresshere
eg:
smb://192.168.1.7
Then either connect as guest, or login with the PC's (not your mac's) username & password.

My mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?

my mini is connected to the wifi network, but is not able to connect to the working internet... can anybody help, please?

192 is local address within your network.
Unless the adddress is of a server that can reolve URL names to ip addresses you wont be able to load an external web page.
You can check what it should be by checking your router status page.
Or if you have an iOS device check under settings, W-Fi, select the network your attched to, then see what is next to DNS.
DG

My macbook is connecting to a wifi network, but my ipad in the same room does not recognize it.

my macbook is connecting to a wifi network, but my ipad in the same room does not recognize it. I have reset the ipad settings, etc. Any ideas?

Try a restart of your entire system. Shut down both your modem and your router if they are two separate devices. Then restart each item one at a time with about three minutes between each device.
Also reset the iPad by pressing and holding the Start and Home keys together, ignoring there'd slider until the Apple logo appears.

During startup my ipod is taking forever to connect to my wifi network. I have the corrct key and everything. Any help?

During startup my ipod is taking forever to connect to my wifi network. I have the corrct key and everything. Any help?

Your model MB528LL ipod is a 2G and can only go as high as iOS 4.2.1. many apps now require 4.3 or later.
You said "will not use the WiFi connection that I have looged on to it continues to tell me that it can't use anything without a secure connection."
Just what are you doing when you get that message and what is the exact wording of the error message?

HT4910 Hi, i have an iPad4 and for the last two days it has been stuck with the iCloud Backup pop up. I cant click on OK or turn it off. It has been connected to a wifi network and left locked and plugged in all day. Any one got any ideas please?

Hi, i have an iPad4 and for the last two days it has been stuck with the iCloud Backup pop up. I cant click on OK or turn it off. It has been connected to a wifi network and left locked and plugged in all day. Any one got any ideas please?

Reset it by holding the power and home buttons at the same time until you see the Apple logo, then release.

HT2250 I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

I have been able to get my MacBook Pro to print wirelessly through my Airport device. How do I make it so other computers (non-Mac) can also print wirelessly as well? They are able to connect through my wireless network but can't print.

Well, you could install the drivers to the wireless printer in you other computers.
blue apple > System Preferences... > sharing
check printer sharing.

I cannot see my wifi network but can see others

i cannot see my wifi network but can see other networks
anybody knows the soln

Your wifi network is not working. Restart it. Delete your wifi settings for this network via System Preferences, Network, WiFi, Advanced. Reconfigure and try again.

My iphone 4 says its connected to a wifi network, but on the top it still says 3G. Therefore not connecting to the wifi

Certain networks that my phone used to connect automatically to, are no longer connecting. The wifi only seems to be connecting at my house and a friends house. Other locations it shows a check mark next to the network, but on the top next to the signal strength it still shows 3G, rather than the wifi symbol. Anyone else have this issue?

Thank you for your reply, if this is true about the wifi not providing the connection to std wifi clients, what can i do to fix this? what does this actually mean? i dont think it will be the case of the network not having internet access becasue i am using it from a computer right now.

TS1398 On my ipod, it shows that it's connected to a wifi network but when i try to open safari, it does not work

On the wifi settings it shows that my ipod is connected to a network, but when I try to open safari it does not open it, because it says its not connected to wifi

You may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Says I am connecte to a wifi network but can't access anything on Safari or open any apps. Help!!!

Similar Messages

Maybe you are looking for