SB live 5.1 not working even with original new installation cd.Pls H

Hi,
I have purchased just last week a brand new PC with intel 95 chipset asus mbd P5-GL-MX having on -board azalia sound component.Along with just got box packed Li've 5. sound card. This has in pack original installation cd.after installing card and everything when i try to run installation cdit says "No sound card installed please insert soundblaster ".i have os win Xp with sp 2 now after investigating through all the post in this forum i have tried everything but yet not succeeded.My message to moderator and compny personnel is that even the new installation cds does not have solution for such problems than if they knew its difficult they should insert small notes atleast that givena hassle free installation so we dont hvae to go and start hunting for the solutions.i was great fan of creative but this has revealed their true face.My final request is atleast provide the working solution for my problem.Expecting prompt action.
thanks
Manish

First of all you need to get into the setup menu when the computer is turned on. Hit the del key and it should bring up that menu. DO NOT CHANGE ANY SETTINGS NO MATTER WHAT!! Look for the sound settings which are usually hidden clear at the bottom of the menu on one of the settings. It shoud say onboard sound enabled. You have to use the arrow keys since the mouse doesn't work in the menu so don't try to use it. Now when you find the onboard sound you have to disable it in order for the new card to be recognized. If you got the motherboard book with the system then read it. It shows how and where to look for this setting. Good Luck
Message Edited by Smokey53 on <SPAN class=date_text>07-9-2005 <SPAN class=time_text>08:07 PM
Message Edited by Smokey53 on 07-9-2005 08:0 PM

Similar Messages

Why does my iMessage not work even with my apple ID signed in?

Why does my iMessage not work even with my apple ID signed in?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom
BTW- Your profile shows you have iOS 6.1.4 installed. The max iOS for an iPad is 6.1.3. iOS 6.1.4 is for iPhones only.

IPhone 4s back camera not working even after buying new iphone 4s

Back when the ios 6 updates were coming out in 2013 my iPhone 4 back camera stopped working, after trying way too many ways to reset the phone and finding others with this same issue I decided to start over I bought a new iPhone 4s so this one was better and 32gb instead of 16gb and it was 9 days later the back camera stopped working on my NEW iphone and still doesn't work to this day? What on earth should I do? How can this be fixed? I've tried hard reset, backing up the new phone, all the tricks I've tried on both phones do not work!!

A new phone has a warranty. So take it to an Apple store. If they can't fix it, they will replace the phone. Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?

Form submit not working even with usage rights enabled

Hi everyone,
I created a form in Acrobat 7 professional (mac version), then used Acrobat 8 (windows version) to enable usage rights.
I have the following javascript code attached to a submit button:
this.mailForm(true, "[email protected]", "", "", "RSVP", "Yes! Please register me.");
When I test the form in the full version of Acrobat by pressing the submit button, it automatically launches my email program, attaches the form's .fdf file and addresses the email, ie. just as the code directs. The problem is that when I try and test in either Acrobat 7 or 8 Reader, it won't work, ie. I press the submit button but the email program doesn't open etc. As I said, I've already enabled usage rights in Acrobat 8 so I don't know why it's not working.
Can someone tell me what might be going wrong?
Appreciate any help offered.

pjones, Tembowa is correct.
if you look up the mailForm in the JavaScript reference guide, you see it's marked with the letter 'F', meaning that the PDF requires Form rights in order for this method to work in Reader.
Now as you rightly say you can use Acrobat 8 pro to extend a PDF with usage or Save rights. (These will be marked by the letter 'S' in the JS reference guide.)
In short when you enable a PDF in Acrobat pro, you 'only' assign Save rights. This is not sufficient for the mailForm method to function in the free Reader.
For mailForm to work in the reader you need to assign a PDF with form rights, which can only be done using LC Reader extensions.
Hope this clarifies things.

System restore not working, even with recovery disks

I have a Touchsmart Tx2 1020us. I want to completely restore it to factory settings.
when i use the recovery manager it pops up saying that there isn't a recovery partition and to insert disk #1. i bought the recovery disk set from HP and put disk 1 in. it then says to click on next. when i click on next the computer just shuts itself down. it never restarts, just turns itself off.
i also tried using the "press f11 repeatedly at startup" method. after pressing f11 a ton of times my computer just begins this shrill beeping sound and will not stop until you stop pressing f11.
so basically i've tried every method on this page :http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00809678#N554 with absolutely no results.
any ideas on how to get this stupid system restore to work?

Hi,
Since you deleted your recovery partitions and your recovery disk set has issues you will need to purchase a set of recovery disks from HP or from an HP Partner. the cost is around $25.00 USD.
It is unfortunate, but when you deleted the recovery partitions you limited the options that were previously available to you.
Nonexistance or modification of the recovery partition is the reason that neither F11 from startup nor Recovery Manager from within Windows does not work.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Why does my google toolbar not work properly with the new updates. It was such a convenience to use the old toolbar to go to places I had visited before. Now I cannot get those old addresses with anything but Firefox 3.62 or whatever.

Why does Google Toolbar not work with the newer versions of Firefox.

Google have stopped supporting Google Toolbar on the latest versions of Firefox. Apparently one of the reasons for this decision is that modern browsers already tend to support many of the functions that google toolbar provides.
Firefox does allow you to specifically bookmark sites you have chosen, and also automatically remembers many of the sites you visit.
* see [[how do i use bookmarks]]

Safari Will Not Work Even After Downloading New Version

Several months ago I experienced a brief power outage and since then Safari has not worked. At All. I have downloaded Safari twice directly from the Apple site and still no luck. THe Software Restore disks with my original OSX package do not seem to work. Any suggestions?
Been using Firefox but there are some things I prefer about Safari (bookmarks and they way they are handled).

I clicked on a link in my email this morning and safari opened and then it opened 73 other tabs (I think all my bookmarks). I closed it and when I reopened I get the title bar and beachball not a new page. Activity monitor shows it is using 100% cpu. If I open safari from a link in email it opens normally. I downloaded and installed the latest (same) version from apple, same story. Thank god firefox still works ok. Any ideas? James.

Cd Drive not working even after a new drive installed.

Hello
About a month ago i had problems with my cd drive, it wouldn't burn a cd and every time i tried it sounded like the computer was going to take off! I took my computer to the genius' and it was supposedly fixed with a new disk drive put it. BUT i am still having the same problems! is there any way in which it may be a software issue as i am still having the same issues and they are actually getting worse!
Please Help!
Thank You!

You should go back to the genius who installed the new drive. The repair will be under warranty.
Bob

Headphones not working after a complete new installation

Hello, After wiping the harddisk of my laptop and a new installation of Windows 7 every thing works fine, except the headphones. I tried installing new driver, but the ones from windows update are not working and on the official hp driver site there are no drivers for audio. How can I fix this?

Hi, Can you see the headphone under Playback devices (Right click speaker icon at the bottom right) ? You may need to install driver for it. Firstly enable it, Windows 7 will search the right driver for you. Also find few steps given below might help you. http://support.hp.com/in-en/document/c01916592

C5 time does not work, even with network based tim...

Hi Nokia peoples,
When is the patch anticipated for our C5's to fix the broken clock problems?
If it just displayed the wrong time it would be one thing, but since it affects the ordering of text messages displayed et al, it's a bit more of a catastrophic issue.
Others have reported that hard resetting the device only lasts momentarily and that the bug is pretty fatal.
Thanks, please let us know the plan.

"Automatic time update" or Network based time update may not be available on all networks. check with some other operator sim

With my OS 10.6.8 mini mac, localhost is not working even with Web sharing turned on.

I get the message from Safari that Safari can't open the page "whatever page" because the server unexpectedly dropped the connection. Any thoughts?

Since you upgraded the Router WRT54GS with the latest firmware so once reset the Router and power cycle the whole network… Then connect the Modem with Linksys Router on the Internet Port and then connect any one computer to any one of the Ethernet port on the Router [Numbered – 1, 2, 3 and 4]… Let me know the RCN connection is a DSL connection or cable connection…
So if you have a DSL connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=4020&userrole=Linksy...
So if you have a Cable Internet Connection you can refer to this link:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&vw=1&articleid=3686
As far as the wireless is concern:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page…
# Then Click on wireless Tab create the Wireless Network Name SSID and select the channel to 6, 9, and 11… Click Save Settings...
# Then Click on Wireless Security sub tab and select the security mode and provide the password as per the requirement… Click Save Settings...
After doing the settings try to connect the preferred network on the wireless devices and check the connectivity….

Why expdp table mode not work even with EXP_FULL_DATABASE

Hi All,
i want to move several tables from schema A to schema B using expdp/impdp at database KTBDB.
ktbdba is the db admin account of KTBDB.
here is the expdb command:
C:\Windows\system32>expdp ktbdba/password@KTBDB_TNS directory=tmp_dir dumpfile
*=tabledumptest.dmp logfile=tabledumptest.log tables=a.dept;*
but i got the three errors:
ORA-39165: Schema A was not found.
ORA-39166: Object DEPT; was not found.
ORA-31655: no data or metadata objects selected for job
the schema name and table name are correct.
i can do this
select from a.dept;*
ktbdbs has the following dba privileges: *(select * from DBA_ROLE_PRIVS where grantee = 'KTBDBA' ORDER BY GRANTED_ROLE;)*
APEX_ADMINISTRATOR_ROLE
CONNECT
CTXAPP
DBA
EJBCLIENT
EXECUTE_CATALOG_ROLE
EXP_FULL_DATABASE
GATHER_SYSTEM_STATISTICS
IMP_FULL_DATABASE
JAVADEBUGPRIV
JAVAIDPRIV
JAVASYSPRIV
JAVAUSERPRIV
JAVA_ADMIN
JAVA_DEPLOY
MGMT_USER
OEM_ADVISOR
OEM_MONITOR
OLAP_DBA
OLAP_USER
RECOVERY_CATALOG_OWNER
RESOURCE
SCHEDULER_ADMIN
SELECT_CATALOG_ROLE
WM_ADMIN_ROLE
XDBADMIN
XDBWEBSERVICES
Do you have any clues why the three error happened?
Thanks
Edited by: user10833860 on Nov 22, 2010 8:46 AM

now the problem is fixed by placing tables clause right after the connection string like this:
expdp ktbdba/password@KTBDB_TNS tables=a.tabl1, a.tabl2, a.tabl3, a.tabl4 directory=tmp_dir dumpfile
=tabledumptest.dmp logfile=tabledumptest.log;
but i when i import a.tabl1 2 3 4 into another schema B. I got another error
ORA-39002: invalid operation
ORA-39040: Schema expression " IN ('A')" must identify exactly one schema.
here is the impdp command:
impdp tbdba/password@KTBDB_TNS tables=b.tabl1,b.tabl2,b.tabl3,b.tabl4 directory=tmp_dir dumpfile=tisbnk_ktbv_tbls_export.dmp logfile=tisbnk_ktbv_tbls_import.log;
why did this happen.
thanks

My 2006 Imac running 10.4.11 is not working well with my new apple keyboard

just bought a new apple keyboard - wired full keyboard - The Funtion keys will not respond as marked.
for example, the f12 key, marked Volume up, brings up my dashboard.
The only function keys that I can change are f1 and f2.
In the keyboard shortcut of Preference, there is not even a listing for volume.
And no, I am not going to update my OS beyond 10.4.11
Help

It's a USB keyboard it should be fine. I have a similar model that works on 10.5.
If it doesn't work you can almost certainly return it (local sales laws apply, so check those).
You could also go to an Apple Store (or any other PC store) & ask them if it could work & ask if it doesn't work can it be returned?
You can search Ebay or Amazon etc for a keyboard that says it supports 10.4, however since that OS is also 10 years old not many manufactures are willing to test an ancient OS that not many people use anymore.
Another option is to find a second hand keyboard from the same era of Mac. Frankly that would be 'icky if it has been used.
Alternately you could try fixing or cleaning yours, but these things don't last forever.
Keyboards & mice generally work.

Touch ID does not work propery with the new software properly

After a few uses Touch ID does not accept the touch finger despite being the same.This has been observed by me only after installation of the latest software.
IPhone 6 IOS 8.1.1

Hi there Solnan,
If you have as yet been unable to enroll any fingers with Touch ID, I would use the troubleshooting information in the following article to help you resolve the issue here, named:
Use Touch ID on iPhone and iPad
Get help with Touch ID
Make sure that you're using the latest version of iOS.
Make sure that your fingers and the Home button are clean and dry.*
Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning. Make sure that your finger touches the metal ring around the Home button.
If you're using a case or screen protector, make sure it doesn't cover the Home button or the surrounding ring. If it does, remove the case or screen protector and try again.
Tap Settings > Touch ID & Passcode and make sure that iPhone Unlock or iTunes & App Store is on. Also make sure that you've enrolled one or more fingerprints.
Try enrolling a different finger.
If you can't enroll any of your fingers, take your device to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for help.
* Moisture, lotions, sweat, oils, cuts, or dry skin might affect fingerprint recognition. Certain activities can also temporarily affect fingerprint recognition, including exercising, showering, swimming, cooking, or other conditions or changes that affect your fingerprint.
Thank you for using Apple Support Communities.
All the best,
Sterling

My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

SB live 5.1 not working even with original new installation cd.Pls H

Similar Messages

Maybe you are looking for