SBC between Lync 2010 and ExUM 2010

Can we integrate Lync 2010 to ExUM 2010 voice mail if there is a session border controller connected in between them using TLS SIP Trunks?

Hi, SBC allow different parts of the network to communicate through the use of a variety of techniques such as below, is one of ways connection mediation server to telephone network provider; Integration Lync 2010 with ExUM 2010 rather than make them communication
together, furthermore, they are need to be making MTLS connection, query contact object from AD and apply dialplan to let inbound dialing.
NAT traversal
SIP normalization via SIP message and header manipulation
IPv4 to IPv6 interworking
VPN connectivity
Protocol translations between SIP, SIP-I, H.323
So if you need to integrate premise Lync 2010 with hosted ExUm 2010, I would suggest you make them integrated as Mark said.
More information about how SBC worked in Lync 2010, please check this document.
Multiple Gateway Support:
http://technet.microsoft.com/en-us/library/gg398971.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Similar Messages

Is Lync 2013 and Office 2010 Home and business compatible?

hi,
Is Lync 2013 and Office 2010 Home and business compatible?
tnx

Lync 2013 and office 2010 is compatible with limited features
The following features are available only with Office 2010 or Office 2013:
Contact card with expanded options, such as video call and desktop sharing
Quick search from the Find a Contact field in Outlook
Reply with an IM or call from the Outlook Home ribbon in the Mail, Calendar, Contacts, and Tasks folders
Lync Contacts list in Outlook To-Do Bar
Office Backstage (File tab) presence status, program sharing, and file transfer
Presence menu in Microsoft Office SharePoint Workspace 2010 (formerly Microsoft Office Groove 2007)
Presence menu extensibility
Also you can refer below link
http://technet.microsoft.com/en-us/library/gg412817.aspx
For your issue, verify from lync version {for example , if your office 64 bit, Lync must be 64 bit also}
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Outlook 2010 and Exchange 2010 SP3

Hello,
we are planning to upgrade from Exchange 2010 sp1 to SP3, most of client PCs has Windows XP sp3 and Oultook 2010 with VSTO addins working with mapi properties.
I need to know if there are any known issues between this client environment and Exchange 2010 SP3 ??
thanks a lot,
Mauricio.
Mauricio

Windows XP is not supported in any scenario, so yes, I'd call that a known issue.
Mike Crowley | MVP
My Blog --
Planet Technologies

SharePoint 2010 and PowerPoint 2010: Open PPTX File in Edit Mode and Open PPSX in in Slide Show Mode

I have the following issue while opening PowerPoint PPTX file and PPSX from the Document ID link provided by SharePoint 2010.
Issue
Initially when I opened PPTX file from the DOC ID link from SharePoint 2010, it is opening up in Slide Show mode which is not how we want it to be.
For PPSX, it is opening in Slide Show mode which is what we wanted.
Thus, I did some research online and found this article at support.microsoft.com/kb/q299824 which requires some modification to the Registry of the client machine.
I did the change as follows
Open Registry
Look for “Computer\HKEY_CLASSES_ROOT\PowerPoint.Show.12”
Set BrowserFlags value to a
After the change, PPTX is opening in Edit Mode in PowerPoint which is correct but PPSX is also opening in Edit Mode in PowerPoint which is not correct
This issue only occurs if I open the document from the Doc ID link in SharePoint. If the documents are downloaded, it will not have this issue.
Questions
Can I set PPTX to open in Edit Mode and PPSX to open in Browser Mode?
Is this fixed as in if I change the registry setting it will affect both file types?
Is there other ways I can achieve opening PPTX in Edit and PPSX in Browser Mode?
[Environment]
My Client machine is running on I.E 9 and Office 2010.
Thank you.

Hi,
To make the PPTX file open in Edit mode and PPSX file open in Slide Show mode, I recommend to edit the registry key HKEY_CLASSES_ROOT\PowerPoint.Show.12 to 8.
I tested the scenario in my environment with changing the key value to 8, after that PPTX file opened in Edit mode and PPSX file opened in Slide Show mode.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error synchronizing folder [8004010F-501-8004010F-0] - Exchange 2010 and Outlook 2010, multiple users get dozens of these per day

15:27:30 Synchronizer Version 14.0.6025
15:27:30 Synchronizing Mailbox 'abc xyz'
15:27:30 Error synchronizing folder
15:27:30
[8004010F-501-8004010F-0]
15:27:30
The client operation failed.
15:27:30
Microsoft Exchange Information Store
15:27:30
For more information on this failure, click the URL below:
15:27:30
http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=8004010f-501-8004010f-0
15:27:30 Done
kbj

Hi,
Please try below steps:
- Remove all organizational forms libraries (subfolders under EFORMS Registry) if they are not needed, and re-create the Outlook profile of affected users.
- Alternatively, if the organizational forms libraries are needed, remove the replica from Exchange 2010 and re-add it
Best Regards!

Exchange 2010 and Outlook 2010 Offline Address Book Download

Hi All,
Strange problem that I can't seem to get to the bottom of.
On a couple of users, about 10/100, can't seem to download the Offline Address Book. When they do a manual Download Address Book through Send/Receive Group, the progress window will remain at about 5% and the status will show "Copying Offline Address Book
Template File". If I leave the window, it will be the same for a couple of hours without erroring out.
We have a casarray set up, forced the ports to 59595 and 59596 for the address book as mentioned the guide. We are not doing SSL redirect on the Virtual Directory. Test-AutoConfiguration from Outlook returns the correct entries. Works for most users but
not all.
On the users that do not work, I've tried deleting the users profile, deleting the Outlook Directory under AppData. Sometimes, magically (for a lack of a better word), if I check the Offline Address Book Directory a few days later, there are files there.
If I then do a manual Download, same thing, the progress bar will be stuck.
Puzzling as I'm not quite sure what else to check.
All clients are on Windows 7 and Outlook 2010.
Any ideas?
Thanks,
Dave K

I also used your recipe --disconnect the wireless mouse-- and the OAB update worked right away.
     (It is not a Microsoft mouse.   )
Thanks for the information.
I have been trying to find information on non-HID.
If you have any quick tips or a pointer to info about this, I wanted to get a better understanding of this topic.
Does this "wireless" for the mouse use the same "wireless" for the laptop regular network access via WiFi ?
(We had some evidence that when the laptop did not use the wireless mouse the OAB worked OK and/or when the laptop was running only on WiFi the OAB worked OK.    Not sure if this is all the same root cause.)
Also, does anyone know if this is something that Microsoft will fix at some point ?
We are trying to determine if "few or many" people here might be having OAB failures and have not reported it.
Thanks again.
keywords ---- Outlook 2010 Offline Addrress Book update OAB Exchange 2007 cache mode wireless mouse Windows 7 W7 hung manual OAB update scheduled / automatic OAB update
==

HT5567 Iphones and Ipads with IOS 6.0.x and later getting Calendar invitation even so that Delegate access is enable on exchange 2010 and outlook 2010

I'm Running Exchange 2010 with outlook 2010 in my environment, since Apple OS went from 5.x to 6.x I been having issues where the Iphones and Ipads running OS version 6.x or higher do not acknowledge that the exchange user has a calendar delegate and are automatically accepting the invitations, not allowing the Delegate to acknowledge first, If this test is run on any Apple devices running OS Version 5.x but less than 6.x the issue is not there.. any one that may have encounter with this situation got a fix or a possible resolution on it.. Thanks

Ok, well after looking at everything, I decided that the best solution was to uninstall an App called "Tango", as it seemed to 'mess' with contacts directly, and I only use it with 1 person, so switching back to Skype (plus Tango sends/shares lots of personal
info, location, and keeps changing it's access rights and doing stuff when you're not looking - I'm sure some people love it, but for me, it's a belts and braces get rid of anything that might have 'contributed' to this issue).
Found my un-sync'd contacts and emailed them to myself, then deleted the Exchange active-sync account. Checked what was left, found google had managed to sync some stuff, cleared that up too!
RE-created the account on the S4 - only need the email and password, as it finds the server and sets itself up automatically (I guess it did that previously).
All is now working, after about 5mins the data had been re-populated and it sync's new changes instantly. But I will monitor from time to time to check that new contacts or added numbers etc do sync. My best guess is that some index or other data became corrupt.
Just one of those things (or had I been tango'd?!).
On the Truncating Notes Issue, the S4 (realised that it's running Android 4.3) does chop a note but only if edited, at 1001 chrs. However unlike others, it seems to only truncate the note if you actually edit the note field, so adding a phone number or removing
one, leaves the note field intact!
To summaries other devices behaviour with the Contact record Notes Field:
- iPhone 3GS (on iOS 6.1.3) truncates at 32,777 chrs (so pretty big notes!)
- Samsung Galaxy Note 10.1 (GT-N8020 - Android 4.1.1) chops at about 1,000chrs, even if just adding a phone number to the contact - so not even editing the notes field
- HTC One X (4.2.2) at 5,122 chrs (when editing any part of the contact)
I hope this might help someone in the future if they have similar problems ...
cheers

Lync 2010 and Outlook 2010 cannot save conversation history

I have a user that is having issues saving their conversations to Outlook 2010. It is isolated to 1 user and follows that user no matter what machine they log into. They have the feature turned on to save their conversations to outlook and i even see the
conversation history start to queue up, but it will not get sent to outlook. The issue 2 weeks ago for them and as far as i can tell nothing was done to their account.

Hi,
Lync client save the conversation history to outlook through EWS, If the EWS is not possible it will go through MAPI. So please check the user's lync client Configuration Information, make sure the EWS deploy is OK and you can find the EWS URI.
You also can try to change the EWSFindCountLimit for this user.
New-ThrottlingPolicy –Name LyncClientPolicy –EWSFindCountLimit $null
Set-Mailbox -Identity usermailAddress –ThrottlingPolicy LyncClientPolicy
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Installing Lync 2013 and remove 2010 client via SCCM

We have Windows 7 x64 PC’s running Lync 2010 64-Bit client.
What I need to do is install the Lync 2013 32-Bit client and then uninstall the Lync 2010 64-Bit client.
Using the Office Customization Took, I am able to install the Lync 2013 client fine, however the 2010 client isn’t not removed.
Here is what I did:
-Have the standalone Lync 2013 installer.
I then copied the Lync 2010 64-bit install files into a new folder in the Lync 2013 source files.
This folder is c:\Lync2013\Lync2010
-Created MSP file using OCT set to never reboot.
-Under ‘Add installations and run programs’ option, I specified the Lync 2010 to be removed post install of Lync 2013.
The Command line: [post install] [INSTALLLOCATION]\Lync2010\LyncSetup.exe /silent /uninstall
-Loaded this into SCCM and set to run at a logon event.
As stated above, Lync 2010 is not removed.
A few questions:
Is this even possible using the OCT?
In the OCT, is it a problem trying to mix two different installers?
One 32-Bit, the other 64-Bit?
If not, then is the command line correct for the Lync 2010 uninstall?
If no for # 3, how do I make SCCM use the correct path to the package where the Lync 2010 install files are?
In the OCT, do I need to have the Lync 2010 command line as:
\%WINDIR%\SystemWOW64\CCM\Cache\nameofpackage
Please help me alleviate some frustration with any ideas for the above.

You can use the command msiexec.exe /uninstall “C:\Program Files (x86)\OCSetup\Lync.msi” to uninstall Lync 2010.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
I'll try this, thanks! For the post uninstall of Lync 2010 using the OCT, should I also ad /quiet switch or /no restart to suppress dialog boxes and not restart the PC when the removal is complete? Or will the OCT prevent it from being restarted
and 'suppress modals' as I set this during the install of Lync 2013.

Legacy integration between Exchange 2003 and Exchange 2010

Dear Team,
we are using Microsoft Exchange 2003 & 2010 Server for Emails, now we have both servers are connected, we want to raise new Single incident request for doing this activity, we want disconnect 2003 server from 2010 server so accordingly need support,
we are ready to pay for this incident,
pls do the needful,
Thanks & regards
Anteshwar Bhosale

Hi Anteshwar,
If you want to remove Exchange 2003 from your coexistence environment, please perform the following procedure:
1. Move all mailboxes to an Exchange 2010 server in the organization.
2. Move all content from the public folder database on the legacy Exchange 2003 server to a public folder database on an Exchange 2010 server in the organization.
3. On Exchange 2003 servers, for each offline address book (OAB), move the generation process to an Exchange 2010 server.
4. Verify that Internet mail flow is configured to route through your Exchange 2010 transport servers.
5. Verify that all inbound protocol services (Microsoft Exchange ActiveSync, Microsoft Office Outlook Web App, Outlook Anywhere, POP3, IMAP4, Autodiscover service, and any other Exchange Web service) are configured for Exchange 2010.
If all above steps have been prepared, we can remove the last Exchange 2003 server from the Exchange 2010 organization from ADSIEdit. For detailed steps about this, please refer to:
https://technet.microsoft.com/en-us/library/gg576862(v=exchg.141).aspx
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Sync Outlook contacts and calendar with iTunes between iPhone 4 and Outlook 2010 (32bits) USB only manually, not automatically.

Hello guys,
After disabeling and enabeling the option automatic sync iPods, iPhones and iPad in iTunes (settings > devices), my iPhone 4 is only syncing manually and not automatically as before the option change.
With manually sync I mean connecting the usb cable and pushing the synchronisation button in iTunes. I reinstalled Outlook (Office 2010 32bit) and iTunes but it did not solve the problem and it's still only manually syncing. I also renewed the Windows Profile. Is there an option I missed in iTunes or Outlook? In Outlook is the iTunes Outlook Addin present and enabled....
How can I solve this problem?
Thanks, William

Hi, could you specify what you did. It appears that nothing on my iPhone syncs any more. I have an iMac and iPhone 4 running the latest system updates. Thanks!

Mouse not working in Word 2010 and Outlook 2010

Hi
My setup is: Windows 7 Ultimate x64, Office pro 2010
I have a problem where my right click mouse og select text isn't working in Word and Outlook. My keyboard os working fine, and my mouse cursor moves fine, but if I try to select text with the mouse og rightclick to copy/paste something nothing happens. Its
driving me crazy.
I have searched the web and found some different solutions but none seems to work permanently.
One option is to use Internet Explorer Settings > advanced > Reset to default.
Another is to delete the Word / Data key from Registry editor
Now I can start Word and start typing in a single line...and it works... until I hit enter the first time. then the mouse isn't working again. the same thing happens in Outlook when writing an email.
I have tried running the Office 2010 repair tool with not effect.
Please help - this is driving me crazy
Best regards and feel free to ask you need me to clarify someting or test something.
Søren B

I have the same problem (Win 7, Office 2010).
Deleted the DATA folder. The mouse works a very short time before the problem reappears.
Renamed the OFFICE folder. The problem remains (no change).
I have no add-ons installed, and have scanned for viruses and malware without finding any. Everything else works fine.
I have done all available updates for both Windows and Office.
I have the exact same problem. I have also noticed that some of the keys do not function the same either. For instance I will get a " instead of an
'@' when I push 'shift' + '2'. I also get a slash or something instead of a '?'. My onenote never has this issue and other programs do not. If I copy and paste into word it copies fine. I end up having to shut down word and start
it back up again if I need to use the mouse on the document. I can use the ribbon fine but on the actual document the mouse stops working after a few seconds or up to a minute. I have run virus scans and everything is fine. This is really getting on my nerves. It
is hard to edit a paper when you can't use your mouse on the doc, especially when using pictures and needing to move them... or even select them.

Taskbar Jumplist anomalies for Word 2010 and Excel 2010

I am having problems with missing jumplists for Office 2010 products (Word and Excel) pinned on the Windows 7 taskbar, **BUT** have no problems with jumplists for Notepad and IE pinned on the taskbar.
Observation 1: I just upgraded from Office 2010 Starter to full Office 2010 by getting a product key. Full Office 2010 was installed on my laptop when I purchased it but only Starter was licensed. Full Office 2010 was unusable until the upgrade. I suspect
the leapfrog from Starter to full Office 2010 might have a part in this jumplist issue.
Observation 2: I can see from a DOS prompt that the AutomaticDestinations and CustomDestinations folders exist under Recent. However, from Windows Explorer I cannot see the 2 folders under Recent. (That may be a clue…if other people CAN see the 2 folders
from Windows Explorer.)
Observation 3: In DOS, I can see that both directories have files ending in -ms. I can also see updates (new files with fresh timestamps) from opening Word and Excel files in those 2 directories. It’s almost like Word and Excel don’t understand to go look
in those 2 directories after the Office upgrade, even though Windows 7 (?) generates the -ms files for the jumplist function.
Observation 4: Again, no problems with Notepad and IE jumplists. I can remove the files from the AutomaticDestinations folder and cause Notepad to have no jumplist items, and then restore them and Notepad has jumplist contents again.
Observation 5: I had no problem using jumplists with Word Starter and Excel Starter. All references to Office/Word/Excel Starter are now gone from the Starter button and All Programs - sent to Recycle bin. I deleted the Word Starter
and Excel Starter entries when I upgraded, but I just deleted the Microsoft Office Starter (Englisgh) entry under All Programs today...I thought it was a benign entry and wouldn't hurt since I wasn't using it. Maybe there's some corruption in registry
as a result of the mixture. Interestingly, I can drag a file created in Word Starter to the taskbar and it will try to pin it to the Word Starter taskbar "ghost" that's in the Recycle bin.
Any clues anyone? I have no large files in the two destination folders, and have only about 20 files total in each folder...far fewer than the 999 threshhold mentioned in one of the updates for Office 2010.
Thank you!

I encountered exactly the same problem, and under exactly the same circumstances as the original poster (upgraded from Office Starter to Home and Business; jump lists worked fine in Starter, then stopped working for Excel and Word after upgrading).
Like the original poster, none of the various fixes found online corrected the problem, nor did re-installing Office.
I also tried what was suggested by Max Meng and created a new User Account. The problem occurred for the new account, just as it did with the old one.
After about 6 hours of fighting, I have finally solved the problem. The solution is not easy, fast or pretty.
What I did was uninstall Office (again) using the Control Panel. Then I ran a FixIt utility found here:
http://support.microsoft.com/kb/290301 (method 2)
My hope was that this would do additional registry clean-up. I knew from earlier attempts that this alone would not fix the problem, though.
Despite uninstalling twice, there were still a lot of references left in the registry to "Word Starter" and "Excel Starter". Likewise, there were still references to "WINWORDC.EXE" and "EXCELC.EXE", which are the starter versions of the executables.
So I went through the registry using RegEdit, and manually deleted every key which included those strings. The largest number of cases were file type definitions for various Word and Excel file extensions. When in doubt, I deleted entire tag
hierarchies for Word and Office file types, figuring that they would be restored when I reinstalled Office. In the process, I removed pretty much every reference to Word or Excel that I could find in the registry.
I also deleted any directory on my hard drive (in c:\Program Files(x86), c:\Program Data, and c:\Users\<name>\AppData which appeared to be related to Office.
Having done this, I reinstalled again, and the jump lists for Word and Excel now work.
In debugging the problem, I found that .automaticDestination-ms files (which contain the data behind the jump lists) were not being created when I opened Word or Excel documents; they *were* being created when I manually pinned individual files to the
taskbar, however.
I suspect that this might be due to the long hexadecimal filename being based on a hash of the application name, or what the system thinks is the application name based on the file type. Removing the references to "Word Starter" and "Excel Starter",
and the corresponding WINWORDC.EXE and EXCELC.EXE in the registry might have cleared up this problem.
Obviously this fix is potentially risky, and should only be attempted if you are comfortable editing the registry. Making a full system backup beforehand would be a wise precaution. For this specific case, however (broken jump lists after
upgrading from Starter to full Office) it would appear the only alternative is a clean install of Windows (to wipe the registry completely).

Problem with Assigning Policy button in Outlook 2010 and Exchange 2010

First of all, I'm posting here because I'm not sure how to post in the previous version of Exchange forums.
Secondly, I'm re-posting this from the Outlook forums as I'm not getting any responses there despite of views.
Hi,
I'm having an issue in Outlook 2010 where I can't assign personal policies to folders. I have setup personal tags and added the mailbox to the right policy. I have also ran Start-MangedFolderAssistant in Exchange 2010 Shell against the mailboxes.
When I go into OWA, everything shows up perfectly, I can right-click and assign policies at will, but when I open Outlook 2010 then the Assign Policy button never appears. I force added it to the ribbon and I can see from there that the button stays grayed
out irregardless of where I click in the folder structure. I have even assigned the mailbox user Owner rights to all the folders to see if it will make a difference.
If anyone can help me solve this problem I will very grateful, I'm pulling my hair out here and I'm certain I could just be missing something very obvious somewhere,
It might be worth mentioning that the company has been using .prf files to configure Outlook thus far, I'm
looking to eliminate that. I'm not sure if that will have any effect on my current problem.
Thanks for your time.
Nico

Thanks for the reply Max, that's a pretty good link.
Like is I said though, I have the policies all set up in the Exchange configuration side of things, when I use OWA all the options for applying tags appear. It's just in Outlook 2010 Standard that the Assign Policy button stays grayed out.
Thanks.
EDIT:
This has been solved, looks like version problem with Outlook.
http://office.microsoft.com/en-us/outlook-help/license-requirements-for-personal-archive-and-retention-policies-HA102576659.aspx

SharePoint 2010 and InfoPath 2010 - Load data from another form

Hello,
I have two questions on this topic.
Is it possible to open an empty InfoPath form and give the user the option of loading it with data from a previously submitted form? They want the ability to save some time of filling in some fields that were entered in an earlier form. Any description
of how or a link would be appreciated.
Also, if I create an InfoPath form template in a SharePoint Form Library like above, the user would like to be able to have multiple forms associated with each other. There would be some key that packaged them with each other. Then from within
one of the form, there would be an option to submit the whole "package" at once. All the forms associated with that one key. Again, any examples or links would help.
Thank you!

You can use InfoPath Query Data connection to point to a library / list where your data is located.
For loading data, you should be using Form Load event, and then populate ID's to a Drop down list.
when the user selects the ID from the Drop Down list, you can write another rule to query data based on the ID's from the list and store the values in your current form.
For the second question, you should try creating a single form with multiple views. and show hide views based on user or business logic.
You can write multiple submit rules to submit Form data to different different library / list.
here are some links for your reference -
Add, delete, and switch views (pages) in a form
http://office.microsoft.com/en-us/infopath-help/add-delete-and-switch-views-pages-in-a-form-HA101732801.aspx
Add a data connection to a SharePoint document library or list
http://office.microsoft.com/en-us/infopath-help/add-a-data-connection-to-a-sharepoint-document-library-or-list-HP010093160.aspx
Automatically query by using a data connection
http://office.microsoft.com/en-us/infopath-help/automatically-query-by-using-a-data-connection-HP001100271.aspx
SharePoint List Data Connections in InfoPath 2010
http://blogs.msdn.com/b/infopath/archive/2010/05/06/sharepoint-list-data-connections-in-infopath-2010.aspx
Hope this helps!
MCITP: SharePoint 2010 Administrator
MCTS - MOSS 2007 Configuring, .NET 2.0
| SharePoint Architect | Evangelist |
http://www.sharepointdeveloper.in/
http://ramakrishnaraja.blogspot.com/

SBC between Lync 2010 and ExUM 2010

Similar Messages

Maybe you are looking for