SBS 560 Speakers problem

I bought these speakers about month ago. The problem is that i connected it to my pc and there is no sound.My sound card is Realtek AC97 Audio. The processor is Amd Sempron.And i dont even know where i need to plug those 3. wires from speakers to my pc. I connected them them as the same colours at my pc.Sorry for bad English.Waiting for help here.

TomasMetall,
You should try testing the soundcard and speaker separately. To test the speaker, disconnect the audio cable from the soundcard end and then connect them to another external device such as MP3 player, discman, etc. Do this for all three audio cable and see if you get sounds from the respecti've speaker. If all works well, the issue should lies with the soundcard you have and since you have already try reinstalling the driver for your soundcard and still facing problem. I would suggest checking it up with your motherboard support people.
Jason

Similar Messages

Apparently faulty new SBS 560 speakers: advice needed!

I'll appreciate any advice people can give me!
Last week, I bought a SBS 560 5.1 speaker system from an online retailer called Komplett. Having just moved into a new flat, I didn't get to test them until yesterday. When plugged in, and even when not connected to the PC, they make an alarming "humming" noise - most of this noise comes from the sub. Furthermore, whenever I turn them off, they make a brief "screeching" noise. Music played through them is a little distorted, and the humming appears to grow - after putting on a tune yesterday, I had to run back into the living room and turn the speakers off when I realised I could hear the "humming" noise from the other side of my flat.
A friend suggested that it's a problem with either the power supply or the sub. Has anyone else encountered this problem? Does anyone have any suggestions?
Oh, one other thing - I'm based in the UK, and the speakers arrived with a Euro plug. Komplett provided an adaptor - just a simple plug head convertor. Is this an issue?
Thanks in advance for your time!
James
Oh - one other thing. Adjusting the bass level at the back of the speaker does have an effect on the volume of the humming. Oddly, though, the level of noise is reduced at the highest setting, and is utterly intolerable at the lowest.
Message Edited by _yossarian_ on 06-20-2005 02:42 PM

Yes, they specifically fix Nvidia 330m problem, they state that the only true solution is to remove old chipset with their brand new chipset that has been apparently released by Nvidia as an update for this issue, this is exactly what they say:
What faults can we fix?
We can fix graphic/display issues relating to the 15" / 17" Nvidia 330M models in 2010 Models. These are fixed using the appropriate professional equipment.
Brand New Chipset Repair - (only option we recommend for Macbook Pro Nvidia Models) With this procedure we re-fit a Brand New Nvidia GPU Chipset reballed in leaded solder.
**** Special Offer - £10 off making the Brand New Chipset Repair £169 + Post! ****
They also provide photos of certain logic board (including photo of serial number) with old chip, chip removed and new chip installed as a proff.
Thanks!

SBS 560 speakers

Hey i was just wondering about my speakers the Left right and sub work the 2 back left and center ones aren't working i don't really now what my sound card is any help would be great
The 5 second rule only aplies to fish :smileyvery-happy:

sniperz,
If it's a Creative 5.1 sound card, try turning on the CMSS features. The sticky at the top of this (Sound Blaster) forum covers the steps on how to enable surround sound effect or you can check out the Knowledgebase article for the steps.
http://us.creative.com/support/kb/ar...p?l=2&sid=4883
If your unsure of the type of card and it's capability you have then it's best to check with Dell.
Jason

2.1 with my 5.1 SBS 560... i know that this has been anwered before

Hi guys!
Well, i know that this has been answered before I post this, but I'm Spanish and I don't understand all the answers...
I have recently purchased this 5.1 SBS 560, and I only hear the left and right frontal speakers, and the subwoofer. I have read and re-read all those posts about this problem, but I don't understand well, and overmore i'm not good with the sound problems...
By the way, i have a Creative SB Live! Value. It is a 5.1 card, isn't it's
Please, explain me how to hear all the speakers. Explain it as if you were explaining it to a dumb ^^
Thanks everyone
Bye!
Message Edited by Fernandisco on 06-02-2005 09:29 PM

ok, thanks again to all of you
I have a SB Live! Valor (in spanish, i suppose that it will be value in english). I know it, and i have checked it in the properties of My PC.
well, i'll bought an audigy 2, then, but i don't have money... :P so i will use this card for some more time
but i have a question, ok, it's only for 4.1, but i only hear still 2 speakers and the subwoofer. Can I use at least 4 spekars, until I buy a new sound card?
I have enabled the CMSS in the creative playcenter, but it seems still to be working only the left and right frontals and the subwoofer
Sorry for my english again... and thanks a lot! ^^
PD: i will post the numbers printed on the card later, sorry but i can't open the PC now

Creative Labs SBS 560 Stereo Speaker Set

Hi, I'm planning on buying the , saw it here:
http://www.hcw.be/hcwcs/p.asp?mscssid=&p=F793&d=L#ld
My question is, does this speaker system uses the headphone jack to connect?
example:
http://www.cewindows.net/reviews/032005.JPG
Because I have a 2.1 speaker system, and I can connect this to my xga-box (little machine to connect my gamecube or xbox to my monitor)
http://www.futuremax.nl/images/xb/bg/650.jpg
(I put the cable from my 2.1 system in the side)
And I need to know if I a) Can connect this 5.1 system to my xga-box
b) Will have sound through all the speakers, including the
subwoofer?
Any advice would be appreciated

Bruuss,
Any of the Creative soundcard that's advertised as supporting 5.1 speaker system or higher is compatible with the SBS 560 and yes, the Audigy 2 ZS is compatible with the SBS 560.
As for connecting two output device, you can get a stereo splitter adaptor so both the speaker and headphone can share the audio output jack.
Jason

Speaker stands for SBS 560

Does anyone know where I can find speaker stands compatible with the SBS 560?
Thanks in advance!

They are the Creative MT-200 speaker stands, I've found them in a local shop searhing on the internet. You can['t buy them from Creative anymore so you'll have to search for them
Here's a picture
http://www.creative.com/products/pro...uct=955Message
Edited by mtyz on 08-18-2006 04:28 AM

SBS 560 problem

I got the SBS560 for christmas and all the speakers are working apart from the center speaker. I mean, its working but when you plug it into the center speaker port it sounds very very distorted, and as if its recking the speaker (its also very quite). This happens with any other speaker plugged in that center port. BUT it can't be the center port on the sub because i plugged in another pair of speakers into the center and subwoofer port of my soundcard and they sounded just like the center speaker when plugged in. Now this soundcard is very old (although it runs 5.1) do you think its the drivers (it shouldn't be as they updated fine) or the soundcard itself, like the sound output or something isn't good enough (sounds more like it). If it is the soundcard, what kind of sound card can i get that is within the ?20 - ?30 mark, prefably creative.
Thanks.

TomasMetall,
You should try testing the soundcard and speaker separately. To test the speaker, disconnect the audio cable from the soundcard end and then connect them to another external device such as MP3 player, discman, etc. Do this for all three audio cable and see if you get sounds from the respecti've speaker. If all works well, the issue should lies with the soundcard you have and since you have already try reinstalling the driver for your soundcard and still facing problem. I would suggest checking it up with your motherboard support people.
Jason

SBS A520 speakers not working on DVD

I have purchased Creative SBS A520 5.1 channel speakers. I have DVD Player with 5.1 channel output.
I have purchased 3nos. 3.5 jack to RCA terminal cable to connect them.
Now only the FR and FL are working the other SR and SL speakers and Center and Woofer are not working. I am after it since 5 days.

I Have the same problem with my iPad Air 2 64GB. usually after restarting the speaker will work again until last night and today. I restarted my device many times but the speaker wont work at all. Actually I had the same problem with the first iPad Air 2 I Bought from Bestbuy, luckily they gave me brand new replacement & I remember the manager said that this is a common problem of returns of the iPad Air 2 at BestBuy.
Apple should fix this because its verry annoying,inconvinient and not worth the money I paid for.

SBS 330 speakers

I HAVE SBS 330 2 IN SPEAKERS. IS THERE ANY WAY I CAN HOOK THEM UP TO A PORTABLE CD PLAYER AND USE IN MY CAR.

atozgirl,
You will need to make sure that your soundcard in the computer is functioning properly first. Test your soundcard using a pair of headphone and see if there's any sound. If there isn't any sound output from the headphone, likely your soundcard is having problem and not the speakers. You can try downloading soundcard drivers from your soundcard manufacturer website and reinstall them. Hopefully it fix the soundcard problem.
Jason

Creative Inspire T6100 5.1 Speakers problem

Hello. I have Creative Inspire T6100 5.1 Speakers with SB Audigy Live! 24-bit installed Sound Card (it supports up to 7.1 speakers). Also I have Stereo Surround CMSS 3D settings (EAX)enabled. However when I'm listening to music or playing games my Rear Left speaker makes no sound. Before I had problem that Rear Right wasn't working (however rear left and right sound was on rear left speaker), but after replugging Rear Left doesn't work. Any ideas what might be the problem?
Thanks for reading...
EDIT:: I tried changing Rear Left and Rear Right speakers with each other in Subwoofer (where it connects) and Rear Left is working properly.
Message Edited by Ripiz on 03-15-2008 10:52 AM
Message Edited by Ripiz on 03-15-2008 10:57 AM

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Internal Speakers Problem

Hi,
I am helping my sister diagnose a problem with her macbook. It is an '07 model.
Using screen share I determined there appears to be a software 'gliche' that prevents her mac from ID-ing the built in speakers and sending output to them. If she plugs in headphones, she can hear music, etc, but without, nothing, indicating the sound card is working properly.
I've gone through the obvious list of troubleshooting, no mute, etc. Most interesting is when I compare her system preferences to mine and do not have external speakers connected, mine shows in the sound menu "internal speakers" while hers shows nothing.
I've taken a screenshot of her system preferences. Link: http://filebox.vt.edu/users/kmtchll/Picture%202.png
If anyone has suggestions on this please let me know or [email protected]

There is a switch inside the MacBooks audio out jack which is malfunctioning in your sister's MacBook. There will be a red light showing inside her audio out jack if I am correct. The purpose of the switch is to tell the MacBook whether to send analog audio or digital optical audio. Your preference panel says that the MacBook is only ready to send digital audio, due to the stuck switch
This can sometimes be corrected by fiddling with a toothpick in the jack or sometimes by just plugging and unplugging a plug.

Lumia 520 Speakers Problem

Today I have faced a new problem. Speakers are not producing sound. I can listen to the music using the headphone(hands-free) but speakers are not working. I have restarted my phone multiple times.
Have anyone faced the same issue, please help me resolve the issue?
Solved!
Go to Solution.

Have you tried rebooting the phone? If not, you can do so by pressing and holding the power and vol down buttons for around 10 secs until the phone vibrates. See if that works.

MSI ex600 sound headphones&speakers problem

Hello all I have MSI ex600 and i have problem with my sound
When speakers playing some music and i want hear it in my headphones its problem because speakers playing away
So i hear music on headphones and speakes too
I try find some solution (and its many problems with this stuff) but for me didnt work
Some information of me Sound card :
Sound(a) : 82801H ICH8 Family HD Audio Controller module: snd-hda-intel
[root@SilentHill ~]# lsmod | grep snd
snd_seq_oss 33408 0
snd_seq_midi_event 7936 1 snd_seq_oss
snd_seq 55936 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7956 2 snd_seq_oss,snd_seq
snd_pcm_oss 42400 0
snd_mixer_oss 17024 1 snd_pcm_oss
snd_hda_intel 374568 3
snd_pcm 82312 2 snd_pcm_oss,snd_hda_intel
snd_timer 22536 2 snd_seq,snd_pcm
snd_page_alloc 9232 2 snd_hda_intel,snd_pcm
snd_hwdep 9096 1 snd_hda_intel
snd 57320 15 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
soundcore 8096 1 snd
[root@SilentHill ~]# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
# alias wlan0 ndiswrapper
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.15 ---
alias snd-card-0 snd-hda-intel
options snd-hda-intel index=0 model=5stack
alias sound-slot-0 snd-hda-intel
# --- END: Generated by ALSACONF, do not edit. ---
That was my last stuff what i tried (options snd-... in modprobe.conf)
Thanks and sorry for my bad english

Add this to your modprobe.conf :
options snd-hda-intel model=3stack-6ch
It will add a headphones switch to your alsa control which if you disable will mute the onboard speakers.
Works on my MSI vr600

MM-1 (Bower&Wilkins) USB speakers problems with OS Mavericks

Hi,
I use USB speakers, rather fine ones. MM-1 (Bower&Wilkins)
With Mountain Lion, everything was good. Ever since I switched to Mavericks, I have all sorts of problem with them.
In lin- in mode, everything is ok, but in USB mode:
I loose all audio sometimes when switching apps, or or for example, starting a video when music is playing from Rdio streaming.
A loud «pop» or "click" sound occurs in the left speaker when a video or a sound «initializes». e.g. opening a web page with a video in it.
Changing the audio out back and forth from USB to "internal speaker" sometimes bring sound back, but most of the time, only a restart will do.
Or to make everything explode:
Play music in Rdio, open Safari, launch a YouTube video, toggle multiple times between full screen and normal mode, then BOOM loose All audio until restarting the Mac.
Thank you!

Hi,
I use USB speakers, rather fine ones. MM-1 (Bower&Wilkins)
With Mountain Lion, everything was good. Ever since I switched to Mavericks, I have all sorts of problem with them.
In lin- in mode, everything is ok, but in USB mode:
I loose all audio sometimes when switching apps, or or for example, starting a video when music is playing from Rdio streaming.
A loud «pop» or "click" sound occurs in the left speaker when a video or a sound «initializes». e.g. opening a web page with a video in it.
Changing the audio out back and forth from USB to "internal speaker" sometimes bring sound back, but most of the time, only a restart will do.
Or to make everything explode:
Play music in Rdio, open Safari, launch a YouTube video, toggle multiple times between full screen and normal mode, then BOOM loose All audio until restarting the Mac.
Thank you!

5.1 rear speakers problem

I hav bought M5300 yesterday and installed it. But the problem is that, when I check my speakers with my audio driver software(Intel Audio Studio and sigmatel both) all of them work fine. means every speaker produces sound in the speaker test. But the problem is that when I play a movio or clip or song the rear speakers dont produce sound at all. only the front 3 speakers produce the sound.
Can somebody help me out.
I have intel DG965RY motherboard and it has inbuilt soundcard compatible to 5.1
Thank you

Hi,
I see that you missed installing the drivers based on the information that you have posted.??? When installing the video drivers, do a clean install and you should not install the NVIDIA audio drivers since you are using onboard audio.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

SBS 560 Speakers problem

Similar Messages

Maybe you are looking for