SC creation with material master

Hi friends ,
can we create SC with material master with a/c assignment object as ORDER.?
if yes , then what could be product catefory be taken in to the shopping cart. ( ie whether default product category or material group in R/3 ).
Thanks & Regards
venga

Hi
To display in account assignemnt you to activate OR in SPRO settings .
Moreover OR must be assigned to GL account in SPRO .
SRM Server ® Cross-Application Basic Settings ® Account Assignment ® Define Account Assignment Categories
Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Account Assignment ® Define G/L Account for Product Category and Account Assignment Category- Here your account assigment category /product category (material group) OR linked with GL account.
You must defined in KNT attribute as a OR in POMA_BBP.
Regards
Muthu

Similar Messages

Creation of Material Master for a material with Material Type NLAG

Hello Sirs,
I have to create a material which will be consumed directly. I would use the
material type NLAG (Non stock material). If I create a material with this material type, will it contain an Accounting view where in I can maintain the price of the
material? If it contains an Accounting view, which type of Price control should be
used (Moving average or Standard)? Further, can we maintain an info record for
a material with material type NLAG?How the price updation happens?
Regards
Yoga

Hi Madhu,
Thanks for your reply. But, I have one more doubt. For non stock materials, we
will specify the cost centre and G/L account at the time of creation of Purchase order. Then, do we have to specify the valuation class at the time of creation of
Material Master since there is no automatic account determination?
Regards
Yoga

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

Problem with material master number range

Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
Gaetano

Hi Gaetano,
This ia a standard thing..even I have experienced it.
Regards,
Chiranjib

Creation of material master

Dear all,
While entering of MM01, MM02, MM03 T codes, The system showing the error message - "Record Y1 01 does not exist in Table T133A" - for this what do I do, Plz suggest.
reg
Vishnu.Ch

Hi Madhu,
Thanks for your reply. But, I have one more doubt. For non stock materials, we
will specify the cost centre and G/L account at the time of creation of Purchase order. Then, do we have to specify the valuation class at the time of creation of
Material Master since there is no automatic account determination?
Regards
Yoga

Integrate Barcode with Material Master

Dear Gurus,
My requirement is to integrate barcode with material master, such that if I scan the barcode, the material number to be automatically populated from the master while creating PO or a transfer posting.
Please let me know the possible means/procedures to do this..
Thanks in advance.
Regards,
Arvind.

Thanks Dipak, Is this possible with only standards. Specifically I want to use a standard solution only.. Thanks

Problem with creation of material master

when try to create material master using mmo1
it gives an error message
Record X5 does not exist in table T133E
and itis terminating the screen and going back to img screen
please try to give me some solution for this
Thanks
regards
Ravi

Hi Ravi,
This is because of selection screen not maintained properly in your customization for each material type.
For more details, explore following IMG settings;
Transaction Code OMT3B:
Logistics General Material Master Configuring Material Master Define Structure of Data Screen for each Screen Sequence
Bye,
Muralidhara

Automatic creation of Material Master at the time raising the PO !!!

Hello All,
I am stuck in a scenario of our client which should be implemented (or mapped) in SAP.
Scenario: At the time of creating the PO (in there legacy system -in house developed) they can choose the items from the existing master data or/and they can also add a new item (which is not present in the master data records at the time of creating the PO).
Now as soon as the system realise that a new item is inserted into the PO, it will create that item record automatically in the backend (database) and the master data will be present from there on.
The items they are dealing with are all fashion accessories and they generate order on the following basis:
1. Demand of particular item in market.
2. List of items provided by the vendor.
3. Based on the requirement in there outlets.
So for them its very difficult to fix there master data records, as it can be changed daily or monthly as per the market conditions. At the same time every time they order, its almost around 100 different items (some time 80 of them are new) in a single PO so they cannot create 80 records manually each time.
These items are not consumable material so obviously they are maintaining the stock for them. They are also not going to use IS Retail.
I am not at all sure how can we map this particular practice in SAP, it would be really appreciated if any one could help me on this problem.
Please let me know if you need any other details from my side.

Hi,
As you have two different systems one in house developed and another SAP, and the PO creation part starts from Legasy system which creats the PO in SAP, you can do some development as per below
1: While Passing the details from legasy to SAP, use two columns in legasy one will contain the Material Code of ECC (for laready exist material ) and another for deescription of material.
2: In case material is new for which there is no material master in ECC pass only description from legasy systems.
3:While getting triggred from Legasy to ECC to create the PO, first check whehter all the material code exists or not in ECC.
4:If some material are not created (only description present) for those material first create the Material Code using BAPI 'BAPI_MATERIAL_SAVEDATA'.
5: Aftre creation of Material code create the PO using BAPI ' BAPI_PO_CREATE1'.
6:For the new created material , trnasfre the master record from ECC to Legasy systemso that next time user can see that material in your legasy system.
Regards,
Zafar

Control of Inspection Lot Creation in Material Master settings

Hi
There are settings like
1 for each document material, batch ,storage location
2 for each material, batch ,storage location .
X for PO , batch and storage location .
for each material document item
In the Control inspection settings of material master
i Can't understand the logic by F1 help .
Any help will be appreciated
Thanks
JJ

Dear JJ
These setting are done for controling the creation of inspection lots
1) If you want to create an inspection lot to all the goods receipt then you have to choose
' ' An inspection lot for each material document item .An inspection lot is created for each item in the goods receipt document.
2) X for PO , batch and storage location .
An inspection lot is only created during the first goods receipt for each PO item . Means if you have a PO item with quantity 50. and you make a GR for the same PO for 10 quantity an inspection lot will be created. But if you make again GR for the PO item inspection lot will not be created. Those item will go directly to unrestricted. This holds good if the PO item is same, batch number is same and aslo the storage location
3) 2 for each material, batch ,storage location
If you set this indicator, the system creates only one inspection lot for each material and batch. This setting is only advisable for materials with a batch management requirement. Again material, batch number and storage location should be same
4) '1' for each document material, batch ,storage location
If you set this indicator, the system creates only one inspection lot for a material document (in a goods receipt transaction) for each material. This setting is useful, if several purchase orders or partial deliveries are processed for the same material in a goods receipt transaction.
hope this helps
Regards
gajesh

Classification Data Creation for Material Master Record

Hi all.
I've a batch that update material master record with a Bapi "Bapi_material_savedata". After Material creation or changing we also need to insert or to change a classification data in the classification view of the material master record.
Is there a function module that could be useful to update the classification data of a material?
Thanks
Carlo

Hi Ravikumar,
I tried to use the function module, but it doesn't works well, is it necessary thet material must have the Calssification view already set on?
Thanks
Luigi/Carlo

In creation of material master

hi to all,
I have one issue regarding material master creation in in intial screen.
when i enter the material number, industry sector and material type it gives one error message as "record Z2 01 is not exist in table T133A" and message number as "M3748".
Regards
Raju.

Hi
Are you experiencing this after upgrade?
This is something relevant to IS-oil.
However please go through OSS notes 918298 and 868771, you may get a clue.
warm regards
sairam

LSMW-CREATION OF MATERIAL MASTER

Dear Experts,
I tried creating a new material using LSMW, after the recording it recorded some checkboxes(KZSEL_01, KZSEL_03....06, i dont really know how to deal with these check boxes in the maintain source field section, any contribution will be highly appreciated, thanks

zkarnalkar explained it already: he fields which you have mention are the select views which you have selected while creating the material master, like basic data1 basic data2, purchasing etc.
The fields on this selection dynpro are variable, their position depends on the the material type definition if you do MM01 or on already maintained views if you do MM02.
Which means in turn that you have to do an extra recording for any material type.
This is just the first variable screen. MRP views have as well variable fields, based on an entry in one field a different field becomes hidden or mandatory. So you need as well an extra recording for any variant in the MRP views
Recording is the worst import method for a material master, as recording is static and material master is high dynamic.
Use BAPI method, IDOC method or direct input method. They are all delivered by SAP and work well.

Program to update info record with material master data

I am trying to determine if there is a standard SAP program that can be run as a batch file to update the fields in the info record with the same fields that are in the material master? ie: Planned delivery time, Tolerance, purchasing group etc.

Hi,
There is no standard report or transaction that can do this.
The data from these fields in the material master is brought in as a default to the info record when it is created. beyond this point the Info record is treated as being the correct data regardless of what happens to the material master data and so no updates occur in the standard system.
It would not be difficult to build an LSMW job to copy the data from the material master to the info records and this would be the recommendation if you want to do this.
Steve B

Problem with material master

HI
I am trying to change the material master profit centre but the system is giving me the error message
You want to change the profit centre but there are still material stocks
So Kindly help me with this
This is little urgent

u cannot change the mmr if there is any stock exist,any open orders (mm,sd,fi) exist.
to chage the mmr u have to make the stock zero and also close all the open orders.
solution is either create a new material.
or u can create a dummy material codethen transfer the stock to the dummy material code-close all the open orders-change the profit centre in the original material code-then again transfer the stock from the dummy material code to the original material code and delete the dummy material code.
regards,
indranil

Problem with Material Master Data Upload using MM01?

Dear Abapers,
I done recording for uploading Material Master using MM01. I selected respective views at the time of recording. Then at the time of uploading it is not selecting the Quality view and Account1 view. Even I used 'P+' function code. it is working but not selecting the 2 views. Manually, if I select those 2 views uploading successfully.
Could you please let me clear on this issue?
Regards,
Sekhar

Hi Chandrasekar,
Scrolling in the view-selecting screen wont be recorded during SHBD ( Recording ).So you need to first select Basic data1 rather than Accounting 1 or Quality management.Once you are in the basic data screen, fill the required description( if its unavailable ) and then choose the accounting 1 or quality tab.Do a fresh recording with the above approach, your issue should be solved.
Regards,
Kiran
Edited by: Kiran NN on Feb 29, 2008 11:02 AM

SC creation with material master

Similar Messages

Maybe you are looking for