SC Orchestrator Incident Request Status update monitoring

Hi,
Is there a way to set up an incident request status update monitoring with orchestrator ?
SCSM 2012R2 and Orchestrator 2012R2.
I've tried to use "Monitor Object" when IR is updated but it didn't work as I expected. I've extended IR class by adding custom date field named "PendigDate" and need to update these field by running a Runbook with Monitor Object and
Update Object but I did not find any possibility to set up (in Monitor Object) condition for "When IR Status chaged FROM Active TO Pending" as it can be set up in SCSM Workflow but when I try to use workflow I am not able to update
"PendigDate" custom field in IR. 

Hi,
please choose your extended Class of Incident in the "Monitoring Object" in Orchestrator, not the original Incident Class
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

Similar Messages

  • Request Status Update

    Is "Request Status Update" a feature that is available within Project Pro 2013? If so, where is it located?
    \Spiro Theopoulos, Montreal, QC (Canada)

    With Project On-line I guess given that there are no reminders/ notifications, there would not be any benefit in implementing it. Is this correct?
    \Spiro Theopoulos, Montreal, QC (Canada)

  • Inbox Search - status for service request not updated

    Hi,
    In inbox search, the status change for a service request does not reflect until the user log offs or opens the service request in edit mode. PFB the steps followed. (Two users are monitoring the service request but is being processed only by one)
    Web UI window 1(User 1): I open the inbox search result page. Service requests are displayed with the status field
    Web UI window 2(User 2): In a separate window, the service request is approved by changing the status of the service request to Approved.
    Web UI window 1(User 1): In the inbox result screen, i click on search for the same search criteria, but still the old status of the service request(updated in window 2) is displayed.
    Observation:
    1. If I open the service request, the service request still has the old status. If i click on edit, the new status is displayed. If i click on Back button (without clicking on edit), the new status is refelected for the service request in the inbox result page now.
    2. If I log off and again open the inbox result, the new status of the service request is reflected.
    3. The status of the service request is updated in the database immediately user 2 changes the status.
    There is no enhancement done for the inbox search. The behavior is for standard inbox result.
    Please provide any pointers to resolve this issue.
    Regards,
    Radhika
    Edited by: Radhika Chuttani on Jan 5, 2011 7:13 AM

    Radhika,
    This is standard behavior in the SAP inbox. The reason is that SAP buffers search results in the Inbox in order to improve performance. So even though you hit "search" again, SAP does not update the search results because this search has already been executed in this session. Clicking "End" or logging off refreshes the buffer.
    SAP released a note to update the "Responsible Employee" in the Inbox without requiring the user to log off. You can see their explanation and the solution here:
    https://service.sap.com/sap/support/notes/1465966
    If you want to enable inbox refresh every time a search is executed, you will probably have to do custom coding. My guess is that you may be able to leverage the CRM_IC_INBOX_BADI. Let me know if this much info is enough or if you want further details on how to technically achieve this.
    Rahul

  • InfoPackage error message "Subsequent update (requests) : Status unknown "

    After running an InfoPackage the status is set to green, but when you look at the Details tab you see an error message "Subsequent update (requests) : Status unknown "  and "With DTP in InfoProvider ZHRPYO00 : Further processed " under it. We did not used to get this error message and don't quite understand why are we getting it now. Could someone explain, please?
    Thanks!
    Luda

    Hi,
    Usually this error could be while loading the DSO or loading DSO first and then to other infoprovider.
    Error message tab at the monitor should give you clear error message where it went wrong. check this tab.
    some time while activating the data this may fail for the DSO object. or some time due to authorization problem to load the data automatically from the DSO to infocubes.
    If possible let me know what is error message.
    Regards,
    Vishwa.

  • REQUEST STATUS YELLOW WHILE MONITOR STATUS GREEN - BI7

    Hellow,
    I try to load data with 0CO_OM_OPA_1, 0CO_OM_WBS_1 into Z cubes which are similar to the business content cubes 0OPA_C11 and 0WBS_C11 respectively.
    ETL is BW3.5 (transfer rule and update rules). When I look at the request in the monitor, I see that everything is green but the request status is yellow and not available for reporting. I can change the status to green manually but this is not a good solution for me.
    By the way the same load works well with te standart cubes.
    I use BI7 but I use BW3.5 business content.
    What could be the reason for such problems?
    Regards,
    Hadar

    Hi Hadar,
    We have exactly the same proble. Have you found a solution to it? I'm using Datasource 0HR_PT_2 to load data into Infocube ZPT_C01 (a copy of 0PT_C01). The monitor of the infopackage is green. There are no errors whatsoever. The status for the request in the Infocube>Manage is set to yellow and the data is not available for reporting. I can set it manually to green, but as you said yourself, it'd be nice to have an automated wway of doing this. Is there any way around this problem?
    Thanks
    Michalis

  • Update activity status based on Customer request status,

    Hello,
    I have a requirement to update the status field of a service request activity to Completed when the service request status = closed. Any suggestions?
    Thanks,
    SKJ

    If the field they are updating is in the same object it shouldn't be an issue. If another object needs to be updated then the workflow won't work.
    Integration events can be used for this. generate a event and have a external process poll the integration event queue for new events. when received, it can do whatever is necessary via web services.

  • Load status in PSA "Request not updated to any data target using delta"

    Hi,
    I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
    There are lot of requests are there in PSA but some of them loaded with status
    u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
    Others u201CRequest not updated to any data target using deltau201D  -- need to delete
    We are deleting manually every week end.
    Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
    Thanks for your help in Advance,
    Raj.

    Hi Rajesh,
    You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
    Best Regards,
    Bansi.

  • SCOM2012 Web Transaction Monitor - Displaying the Request Status

    I have successfully created a 'Web Application Transaction Monitor' using the SCOM 2012 R2 Console wizard.  The monitor goes through several listed website URLs and completes.
    What I'm interested in is how to display the 'Request' status objects.  I use the MS-Visio plug-in to display various dashboards within Sharepoint and I would like to display the part of the Web Transaction which is showing an error.
    I can see the individual requests under the Availability of the created 'Web Application Transaction Monitor'.  I just need to capture those objects for displaying within a view or MS-Visio diagrams.
    The email notifications show which of the URLs are having the issue, but I do not seem to find a view or object I can display.
    Any ideas on what could be done would be appreciated.  I was hoping NOT to create individual Web Txn Monitors for each URL, but that maybe the only solution.

    When I create a Dashboard View and add the Alert Widget, I can get the URL from Name Column.
    Juke Chou
    TechNet Community Support

  • Status update of Credit Memo Request

    Hello,
    The processing status in the credit memo request is not updating as "Fully invoiced" even after the credit memo is created.  Due to this I am able to repeatedly create credit memo against this same credit memo request.
    The problem as i understand is that in the credit memo request > header data > status tab > Bill.stat.order-rel. field is still showing  "Not invoiced".  But it is suppose to show "Fully invoiced".
    Can anybody let me know where is the setting to control the status update of the credit memo request. 
    Thanks,
    Shankar

    IN the customising for the item category, Check the billing relevance is C or not.Normally the completion rule is left blank. If not use this field, This is used for completion from quotations to orders but works as effectively as for other order types as well.
    regds
    Jude

  • Why does my iPad 4 keep update requested status for ios8?

    Why does my iPad 4 keep update requested status for ios8?

    The Apple servers are slammed right now with iOS 7 downloads AND activation requests.
    Be patient and try again later.

  • Incident resolved not updated status in report or database dw

    Hi,
    There is an incident with status resolved in sm console. Looking in history tab it show all steps finishing in resolving incident. But when I run a report incident details, the status of incident is active. Looking in database dwdamart, all information about
    resolution are empty,with null value.
    Incidents opened and resolved after this incident are normal. Incidents resolved are resolved in console and report(dw).
    Tks.
    Vitor Cesar

    Problem resolved. 
    First I unregister and register dw again.
    After that, I changed one value in incident from resolved to closed incident and waiting  jobs run. 
    I don't know what resolved this issue...but now is normal.
    Vitor Cesar

  • Request status in infocube is always in yellow status..

    Hi Friends,
    We are loading the data from 3 ODS to one infocube but all the requests from ODS to infocube is always haivng yellow status ( even though load is completed without any errors). We are manually changing the status to Green.
    Any suggestions regarding this problem...
    Thanks in advance

    Symptom
    All requests in InfoCubes have the QM status 'yellow traffic light'.
    Solution
    In the InfoCube administration in the menu
    'Environment -> Request handling...'
    activate the flag 'Set quality automatically' on the popup 'Maintenance of the automatisms'.
    This flag was of no importance before BW Release 2.0.
    This flag is interpreted actively as of BW Release 2.0. For InfoCubes where this flag is deactivated, every request must be set manually to green (available for reporting) or red (incorrect) by a QM action.
    As a result, the individual request can have a different status independent from its monitor load status in different InfoCubes.
    After upgrading from BW1.2B to BW2.0, the flag is interpreted, but is not set for any of the old InfoCubes.
    Therefore data, including old data, is not automatically visible in reporting, if it is not rolled up or compressed.
    In order to accomplish this, you can either activate the flag 'Set quality automatically' or set every request manually to green (administering the InfoCube on the 'Requests' tab in column 'QM status of the request after update').
    This is a button column that only affects the status of this request in this InfoCube!
    By setting the QM status in the monitor for the load log of this request you can set all QM statuses of this request in all updated InfoCubes simultaneously.
    If you change this flag, you choose button 'Refresh' in the tabstrip 'Requests' so that the flag will interpreted and the requests are set to 'Green' in the InfoCube and thus displayed in Reporting.

  • Request status in RED color.

    Gurus-
    I am loading the data from Data Stage to BW.
    First load went thru with out any errors. When Data Stage team scheduled load for second time then I see Red indicator in "Request Status" as well as in "Status" tab.
    When I go to details tab I see RED in "Extraction (messages) : Errors occured", Transfer (IDOCS and TRFC) :Errors occured and "Susseq. Processing (message)".
    When I expand " Extraction (messages)" I see "1000 Records sent (1000 records  received)" in red color.
    and if I expand "Transfer ( IDOCS and TRFC)  "it says "Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished "" in red color. all the Info IDOCS are in green color.
    But I see Transfered and added records in mange screen of DSO. Can I activate the DSO by changing the indicator to green from red?
    Pls suggest with ur valuable suggestions..

    Hi,
      In the monitor right click on the data package1 and do a manual update.
    Jaya.

  • Customize the Service Request Status

    I am trying to customize the status for a Service Request form.  We want to add some additional ones to that list.  I am not finding where I go to update that list.
    Cheers!
    Matt

    The list you are looking for is in the Library Tab, Lists view, Service Request status. take a look at
    How to Add a List Item.
    I'd like to argue that this is probably not what you want to do, however, as the status property is pretty tightly managed by the out-of-the-box workflows that move service requests forward, and manually setting these statuses will likely break the out-of-the-box
    activity status engine.
    Instead, you probably want to Create a new MP in the authoring tool, Locate and
    Extend the Service Request Class, add a new Enumeration property to your extension, use the Create List button to create a new list,
    Save and seal your class extension MP, close your original unsealed class extension MP and open the Sealed copy, Create a second MP to contain the form extension,
    Locate and
    Customize the Service Request form,
    add a new List Picker bound to the property and list you created before, Save and seal your Form Extension MP,
    Import both the sealed versions into your test system, Create a new (unsealed) Management pack in the test system and all your list items to the list you created earlier, test the forms
    and make sure they look right and show the right data, then Export the unsealed list MP, and import all three MPs (the sealed class MP, the sealed form MP, and the unsealed list items MP) into your production system.
    This has the advantage that it gives you a new place to store your custom SR statuses that you can set to be whatever you like, and doesn't break the out-of-the-box activity engine workflows, or the grooming engine that depends on the "closed"
    status.

  • "Request not updated" message misleading

    It seems that if I use a DTP using FULL extraction mode, the request in the PSA shows the status "Request not updated in any data target".
    This is not strictly true because it has been updated, only via FULL instead of DELTA.  I can appreciate that there is no need to track this, but the message seems misleading.
    I would suggest the message should be changed to a more accurate "Request not updated via Delta into any data target". Does that make sense, or am I misunderstanding the meaning of this status message?

    Hi kevin,
    with the new functionality the data from other source system through infopackage is stored till PSA only, regardless of whether it is FULL or DELTA....
    After that you create DTP for data transfer within BW i.e PSA to data target...
    Also this note from help.sap...
    With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred.
    Reward if it helps,
    ajay

Maybe you are looking for