Scale price get in KONM based on vbap quantity
hi friends,
i want take scale quantity price for the sale order materials . each material have 2 or mare prices . based on quantity i take scale price.
example.
materials quantity = 5.
scale price:
quantity price
0 130
2 120
3 100
i need to take scale price based on quantity < or = to scale quantity
how to take this.
please help me very urgent .give me the sample coding.
regards,
jayachandran
Hi Jai,
chec this.
The condition type has on the section scale:
Scale Base Type = Quantity.
Rule for Scale Rates = Ascending.
Maximum Number of Scale Dimensions = OneDimensional.
Unit of Meas = KM.
I want to determinate the price.
If I have a product range of 1 to 5 the price is $ 10.
If the units range is 6 to 10 the price is $ 20.
quantity equal 1, price equal 10.
quantity equal 2, price equal 10.
quantity equal 5, price equal 10.
quantity equal 6, price equal 20.
quantity equal 7, price equal 20.
quantity equal 10, price equal 20.
Currently.
quantity equal 1, price equal 10.
quantity equal 2, price equal 20.
quantity equal 5, price equal 50.
quantity equal 6, price equal 120.
quantity equal 7, price equal 140.
quantity equal 10, price equal 200.
cheers,
Hema.
Similar Messages
-
Material scale price in cost calculation
Hi Experts,
could any of You pls advice me with an 'inforecord scale price' - based calculation?
My calculation - material cost - based on inforecord price, but it is not correct when I want to make a calculation for ex. pilot products. During cost calculation for different costing lot size, I have different material qty requirement. Scale price is exist in inforecord. In the calculation the system always check the scale price of the material - based on the costing lot size in the material master, and do not care about how much the actual raw material need in the calcuation.
Ex. the scale price is 1-100 pcs X USD, 101-1000 pcs Y USD -mat.master lot size: 1000; I have a calculation for 600 pcs - which requires 60 pcs of the raw material. In this case I want the system to have the 1-100 pcs X USD - as actual need on calculation, but the system takes the 101-1000 PCS Y USD - as material lot size. So I really can not check how much the pilot will cost: 100 pcs, 400 pcs etc to produce, but I always have to maintain the component material masters with changing the calc. lot size in material master (first I have to check how much will be the consumption in the following calculation...)
I want to have a calculation, when the real raw material consumption in the calculation is checked and the scale price is match with it.
Do You have any good idea, how to handle?
BrDear,
thank You for answering and investigating into this issue, You get a good point, but my setting is actually different form standard:
In my calculation through costing variant and valuation variant - the inforecord has higher priority than the planned price - we only use planned price form mat. master if no relevant inforecord exist, but in my case there are inforecords with scale price.
Issuing production order is not enought for me for checking all costs - some additonal cost components are exist - through overhead determination such as duty, freight, etc. which has been defined using overhead group and overhead key, and assigned to material in material master (costing view).
I know it is a bit more complex than a normal quantity structure calculation - but this is the one, I have to deal with. Available CO-consultant told me, this scale -price handling is MM-issue, that is why I ask MM guys first.
Anyone pls, have some idea about inforecord scale price in cost calculation based on component requirement in actual calculation. I would appreciate a lot.
Br -
Price getting Re-determined in Credit Memo when PO is entered
Hello all,
While creating a credit memo request from an invoice, the prices are copied perfectly, (In the copy control pricing type is D (copy price unchanged)). Now once I enter the PO number the prices of the items are getting re-determined. The items actually have bracket prices, so when each item price is getting redetermined the bracket is only applied to individual items and not to all the items as it should be because the scale formula is for monthly calculation. On close analysis I have found that all items having different delivery dates their prices are getting re-determined. I have checked it is not because of any user exit and its pure Standard SAP code that is doing this based on the XVBKD table, where if there is any entry at the item level, it is re-determining the price. Has anyone faced a similar situation, if yes pls let us know of any solution.
Thanks in advance
AnirbanDear Rupak,
Your price / Quantity is copying correctly from Billing means your Copy Control settings are proper.
Now while creating Credit Memo Request, after you change Quantity you are currently selecting Update & "B" - i.e. Carry out new pricing.
Here instead of "B" select "A".
A means - Copy price components and redetermine scales.
Here the system:
1. does not determine any new condition types
2. and only redetermines the scale prices for changed quantities
I guess this will definitely solve your problem.
Hope this helps...
Thanks,
Jignesh Mehta -
Selling pricing superceed scale price in sales order creation
Hi all,
I have a scenario as below.
Material A has maintain 3 pricing condition as below.
1. Selling price (PR00)
material A : normal selling price(PR00) = $2.00.
2. Free goods
material A : free goods -> 12 + 2 (exclusive free items)
3. Scale pricing
material A : scale pricing -> 12 items = $ 1.80
6 items = $1.00
3 items = $ 0.80
If the customer buying 12 items, he will be given 2 items free, the 12 items will be charged for rm2.00(normal selling price) instead of scale price $1.80.
Meaning to say if there's a free goods determine, i need the items to be charged with normal price instead of taking scale price.
How can I do this? I need this urgently.
Kindly advise.
Thanks!Hi,
Please check if you use inclusive in free goods determination then the price will be picked $2.00 but in exclusive that is 102 or 122 you will get $1.80only, check this and confirm. -
Hi Experts,
I am aware that, we can upload multiple quantity based Prices in Qualified Look up Table called "Price" in SRM MDM Catalog repository like stated below :
Qty Price
0-10 2$
11-22 5$
But i don't see any option available to enter range value's in Lower Bound field of "Price " Table.
Please assist.
Kind Regards,
SKHi Padhi,
normally the price base quantity field is to say how much has to be divided the price
so 1000 EUR for 50 pieces >> 1 piece = 1000/50
The fact is that in the Catalog you have more than one entry for the price, and you have to decide which one you want. The system is not so smart to change the price based on the quantity.
Anyway I tried as you suggested to insert the same price base quantity as the lower bound:
Lower bound: 1 - 100 - 1000 piece
Price: 10 - 5 - 1 EUR
Price Base Unit: 1 - 100 - 1000 piece
In the Catalog I can see the three entries and I can decide which I want.
I choose price 5 EUR but with 1001 quantity (for which the price has to be 1 EUR).
In the shopping cart I have 1001 pieces, price 5 euro per 100 pieces = 50,05 EUR.
This is not the result we want as Scale prices.
Do the Scale price work in your system?
Thank you and Regards,
Maria -
The currency is not getting updated in the table VBAP
Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
SenthilDear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe -
Report for displaying info record scale prices
Hi all,
Can any one provide me the sample code for a report displaying info record scale prices.
Thanks,
SureshCheck t.code MEKP.
-
Function Module to get pernr number based on first name and last name
Hi All,
What is the Function Module to get pernr number based on first name and last name.
Could you please help me.
T@R.
Vidyahi Vidya,
you can get perner from PA0002 based on firs name and last name.
use select query and get perner. -
How to activate Image, Pdf, Hyperlink and Scale Prices in SRM-MDM
Hi Experts,
I have requirement to activate the following features:
1. Image
2. PDF
3. Hyperlink
4. Scale Prices
These should be activated and should be available in the current business' internal catalogs so that users could be able to easily identify the item they want to create.
Does anyone know the steps on how to proceed on these?
I have read and researched about this and I found out that objects should be imported in Data Manager and the link between items should be mapped in Import Manager.
I tried this first in Image, I was able to successfully import image. I tried adding the link first in existing item in data manager by right click on the Image field->Add/Link New... -> I was brought to the screen where I should add the image again, so I added ti again and there I was able to link the image and the item.
I understand that for the image to be available in the end-user's internal catalog screen, I should modify UI Configuration. So I added the Image field by going to Customize Display Tab-> and adding it in the Item Lists, Cart Preview, Compare, Item details radio button. But when I checked on end-user's internal catalog screen, Image column is still not there.
I believe PDF and Image has the same process. But how could I add the link between image and item for the entire catalog items?
Please also help on how to activate the Hyperlink and Scale price functionality.
Thank you so much!Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team -
Grey scale objects get lighter when Outer Glow assigned to text
I have a grey scale object on one layer and text on another. When I apply an Outer Glow to the text, the grey scale object gets 10% lighter. If I have a 2 page spread and apply an Outer Glow to text on one page, the grey scale objects on both pages get lighter. Is there some way to prevent this or at least an explanation as to why?
Your transparency blend space (probably working cmyk) is different than the grayscale space of the image. Your grayscale image profile is "dot gain 10".
Take a look at
Adobe's guide to transparency.
J -
Report to get WBS elements based on Project Type
Dear Experts,
Is there any report exists in Project Systems to get WBS elements based on Project Types.
This we can check in the table PRPS-PRART.
But i need to know the availability of T Code.
Thanks in advance.
Regards,
Srinivasareddy YHi,
If its a one time requirement using CN43N might help in meeting the requirement. However, first it has to be executed for a certain range of projects and then the layout will have to be changed accordingly. Instead of doing this if a custom report is developed with the input parameter as "Project Type" it would make it much more easier. You can even have the F4 search option for the input parameter. Doing this will help if the report is going to be used frequently in the future.
Take your call and proceed accordingly.
Regards,
Gokul -
Mass check scale price of info record
Hi there:
Is there any transaction or table to mass check scale price of info record?Any updates?
-
Function Module to get PO details based on Plant and PO date
Hi
1. Is there any Function Module to get PO details based on Plant and PO date?
2. Is there any Function Module to get Material document details based on PO number?
Thanks
Narendrahi,
check these standard reports.
ME2L - By vendor
ME2M - By material
MSRV3 - By service
ME2K - By account assignment
ME2C - By material group
ME2B - By tracking number
ME2N - By PO number
ME2W - By supplying plant
also chck this func module.
REPL_LIST_PURCHASE_ORDER_READ
reward if hlpful. -
BAPI to get Invoice Details based on PO Number
HI,
Is there any BAPI to get Invoice Details based on PO number. If so could you pls let me know that.
Regards,
RameshHi Ramesh ,
there is no Direct BAPI to get the List of Invoices ,But based on the Vendor list u can get the List .
pass Vendor list , Document Dates.
<b>BAPI_INCOMINGINVOICE_GETLIST</b> for more info check the Documentation of this FM.
Regards
Prabhu -
When entries in the price information ( or contract price) table exists for the same contract + line item, the price is labeled with "**" as "Scale Price Exists".
How do scale prices work in MDM (lowerbound?) ? And I don't believe it's replicated from ECC contracts.
Thanks.Hi,
It's not more than one price per item, but more than one price per item per contract + line. We have no problem maintain just 1 price per item.
I'm just curious from a process perspective, how are scale prices used? Are they used in conjunction with the lowerbound field?
Thanks.
Maybe you are looking for
-
Help - I can no longer access the music store and I am rubbish on computers
I know this topic has come up before on this forum but I had trouble following it all! I just upgraded mt itunes (big mistake) and now I can't access the music store. When I try it says that the network connection was refused. I am running Norton but
-
I need to pull some narration from a DVD to burn onto a CD for a client. We no longer have the original audio. I used MPEG Streamclip to open up the .VOB files, but when I use that program to export the audio I get "error: can't convert sample rate".
-
So I use the program "Ares" and all the music that gets downloaded from there goes to a specific folder. Now, I know exactly how to import those songs and erase the duplicates when that happens, but there has to be an easier way to do what I want to
-
I cannot select images that I've sent to back.
Once I send an image to the back, it's impossible to ever reselect it. Any suggestions?
-
CUEAC Server: how long do we need purge the database of SQL?
hi today all our attendant consoles of switch board were out of service, later i found the error from the server log file and event viewer: SQL.Exception(p, or setting autogrowth on for existing files in the filegroup. Could not allocate space for ob