SCCL Msg: "Cannot open log \\hostname-l\sapmnt\trans\log\CC00000n.NSP"

I'm working with the NW7 ABAP Trial Version on my laptop.
I've created a client 100 and logged into it as SAP* (after setting login/no_automatic_user_sapstar to 0.)
But when I use SCCL (client local copy) to try and copy from 000 into 100, I get the following error message:
Cannot open log
hostname-l\sapmnt\trans\log\CC00000n.NSP
Can anyone tell me how to fix this problem?
Thanks
djh

question was asked and answered in a different forum

Similar Messages

Client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc

Hi Experts,
While Client copy in Local System , I am facin gthis Error, please anybody help me out.
client copy error:cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
Regards,
Amit,

Your Error Message is like => cannot open log:/w2k3-web53/sapmnt/trans/log/cc000007.ecc
This means 'w2k3-web53' is your machine name. and your sap system name is 'ECC'.
1) If you are on windows then :
    Type '
w2k3-web53\sapmnt' in address bar, this gives you an error and hence you are getting the above mentioned SAP error.
    Therefore to get out of this error follow the simple steps=>
     I) Create 'sapmnt/trans/log' (recursive) directories anywhere on your machine.
    II) Share 'sapmnt' directory over network {right click on directory->properties->sharing} with full access to others.
   III) Confirm this by typing '
w2k3-web53\sapmnt' in your address bar. 'CC00000*.ECC' will be created automatically by SAP system while copying.
2) If you are using Linux then:
    Create the directories as mentioned above and give full access to directories by using CHMOD command.
    Share 'sapmnt' directory if necessary.
Note: Change the protection level of your client in SAP if necessary:
SCC4->EDIT->Double click your client -> then set Protection level at level 0 {No restriction}.

Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

Hi George ,
Is it happening with all the PDF' or any specific one?
Could you please share the error message so that we can replicate at our end ?
Try repairing reader once and see if that fixes the issue.
Launch Reader>Navigate to Help>Repair Adobe Reader Installation
Regards
Sukrit Dhingra

Kernel msg: Cannot open ter-112n

I included the ter-112n font to be my consolefont in rc.conf :CONSOLEFONT="ter-112n". I included the keymap in mkinitcpio.conf and created an updated kernel img. However, on boot up I get the message "Cannot open ter-112n". The font exits in /usr/share/fonts/local and /usr/share/kbd/consolefonts. Anybody knows what the problem is.

Is every right for okay, to open/read? What's in the your syslog ?
If you set it directly with:
setfont -v ter-112n ?
And this:
Try ter-114n or ter-116n. Works, looks good!
Put it in /etc/rc.d/rc.font to have it at boot.
Is Font cache okay ?

Discovey system Client copy error TA 074 cannot open log :\\hit-nxdomain\sa

I have HP Discovery system installed as per quick start guide. After the completion when I tried to cpy client 200 I get error msg TA074 can not open log:
hit-nxdomain\sapmnt\trans\log\cc000013.erp
Tried adding sapmnt full permissions to SAPserviceERP

I had similar error message and I figured it had to do with the host name. I had changed the server name after the installation. I changed the server name to its original and made the client copy.
Hope this helps.
Regards,
Faramarz

Project cannot open the file

My .mpp files are failing to open in the MS Project. I get the msg "Cannot open file. The file may be corrupted". Any ideas?
Thanks!

Hi,
First of all, ehat is the version of your project file and what is the version of your MS Project application?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

I am Migrating a application in Visual Studio 2005.
In my development PC I was install the Measurement Studio 2009
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Unable to Build VC++ application it showing error 1 LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib' but I am Using Measurement Studio 2009

I am Migrating a application in Visual Studio 2005.
In my development PC I install the Measurement Studio 2005.
my application is Showing following error:
1>Linking...
1>LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
1>Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDll\Debug\BuildLog.htm"
1>NICfpDAQDll - 1 error(s), 0 warning(s)
In the project Setting I am done following setting
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
but in "C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";" directory Not having the 'NiFieldPoint71D.lib' because Measurement Studio 2009 not provide this dll.
Please provide some solution.
Thanks
Nityanand

You posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231

Cannot open audit file

Hello Friends,
As a part of re-platform activity our production application servers are moved from AIX to Windows operating system. But CI is still in AIX.
From the next day of re-platform activity we are getting the SM21 error log as "Cannot open audit file: /migrate/<SID>/audit/log\<DATE>.AUD. This log is generating only on Windows application servers and not on CI(AIX).
All the file systems are properly mounted from AIX to Windows.
DIR_AUDIT parameter value also maintained in default profile as /migrate/<SID>/audit/log
Can any one please suggest
Thanks in advance,
Mahi.

Hi ,
Some parameters which might help you for this"
Name Description
FN_AUDIT                Name of security audit file audit_++++++++
DIR_AUDIT                Directory for security audit files
*rsau/enable                Enable Security Audit*
rsau/max_diskspace/local      Maximum space for security audit file
rsau/max_diskspace/per_day      Maximum size of all security audit files per day
rsau/max_diskspace/per_file      Maximum size of one single security audit file
rsau/selection_slots           Number of selection slots for security audit
rsau/user_selection           Defines the user selection method used inside kernel functions
Also refer to the SAP Note:: 539404 - FAQ: Answers to questions about the Security Audit Log
Please do the cross check of the related param's and also check the SAP note which might be very helpful.
Regards,
Sanjeev Nagalikar

Cannot open Outlook Item .msg

I have a user who cannot open Outlook items (.msg) files. If Outlook is already open I get an error saying "The Operation Failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook." If Outlook is
not already running I get an error that says "Cannot start Microsoft Outlook". I've disabled all add-in's and created a new Outlook profile. I've also saved emails to the desktop and immediately tried to open them and it fails. The user
is running Outlook 2010 version 14.0.6129.5000 32bit on Windows 7 Enterprise 32bit.
The event also generates a system log Event ID 300 from source Microsoft office 14 Alerts.
Microsoft Outlook
The operation failed. The messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
P1: 301670
P2: 14.0.6029.1000
P3: 6xk3
P4: 0x80004005
Vincent Sprague

First, make sure that Outlook is fully patched and see whether you can repro the issue or not. Then, let us know the following:
Where these .msg files are exist?
How these .msg files are generated?
DeVa, M.S., {MSFT} Please remember to mark the replies as answers if they help

Windows 2k8R2 - Receiving Error when logging in ( MMC Cannot open the File: C:\Windows\system32\ServerManager.msc)

Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
MMC Cannot open the File:
C:\Windows\system32\ServerManager.msc
This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
PM

Has the system update readiness tool been run without error?
http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
You can also try creating a new MSC
Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Cannot open eventlog service on computer '.'. (Windows Event Log service doesn't exist)

This problem used to be solved after moving a computer object into the appropriate OU and restarting, and if that didn't work, it used to be solved when uninstalling and reinstalling Microsoft FEP (restarts in-between). Now, the only way to access
event logs is by logging in as a domain admin, or by accessing event logs through remote manage.
If a machine object is added to the domain, dropped into the computers container, and restarted, we get this error when going into Computer Management:
"Cannot open eventlog service on computer '.'."
The original problem was noticed on our VMs, but I also tried it with a Lenovo Windows 7 build out of the box, added it to our domain, and the problem occurred. When our desktops are built, SCCM's task manager drops it into the appropriate OU immediately,
so desktops don't have issues. With VMs, they are dropped into the computers container and restarted, so once this problem occurs, it almost never leaves. SOMETIMES, removing it from the domain solves the problem, but not always.
I've tried all of the suggestions I've seen online and none of them have worked, such as cleaning up the policies (through registry, and the appropriate system folders), adding the proper NTFS permissions on the RtBackup folder and %SystemRoot%\System32\winevt\logs, netsh
winsock reset, cleanboot, etc.
I did notice that I'm unable to find the NT Service\EventLog user group. I wanted to add it to %systemroot%\system32\winevt\logs, but the group cannot be found on the local computer. Even if that's the problem, why is it missing?
It doesn't seem like anyone else on the internet gets this exact error.

Hi Kate!
Yes, the Windows Event Log service is missing. I had already tried your method (#3), and I did try it again. This is the error I get:
"The specified service already exists."
If you check services.msc, it's still not there. If you try to start the Event Viewer, the same error comes up:
Cannot open eventlog service on computer '.'.
Hi,
Please check for the existence of this key. If not found, create a *.reg file from another machine and import.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog
Then, check the issue again.
If this doesn't work, let's run System file checker tool to repair system:
Run SFC command in elevated command prompt
SFC /scannow
Any error message, please post here to let me know.
Keep post.
Kate Li
TechNet Community Support

Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201).

"Event Viewer cannot open the event Log or Custom view. Verify that the Event log service is running or query is too long. The instance name passed was not recognized as valid by a WMI data provider(4201)"
This error keeps cropping up now and again on most of our domain controllers (OS-2008 AND 2008R2)...Usually a restart fixes the issue however the issue repeats and security logs don't generate.
Any advice on how to fix this issue permanently would be greatly appreciated.

Please see this: https://social.technet.microsoft.com/Forums/windows/en-US/95987ca3-a1b2-4da6-95b7-d825d06cdac7/error-code-4201-the-instance-name-passed-was-not-recognized-as-valid-by-a-wmi-data-provider?forum=w7itprosecurity
You can also try rebuilding the WMI repository: http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Since yosemite install, I cannot openAI cs5.5 -error msg

since yosemite install, I cannot open ai cs5.5 -error msg is "an unknown error has occurred (-50). Adobe illustrator will now quit, I have spent ages trying to find fix and since I downloaded the app, am not sure what to do, can I re-install online from Adobe site? I cannot figure out why all other apps are working, except AI
thanks

Try to install java from below link and try once
Java for OS X 2014-001

ORA-00308: cannot open archived log, ORA-27041

hi All,
here I am making DR server and I copied SAP Data file1,2,3,4 from PRD to DR server and created control file. when I try to run following command for applied archives which i copy from PRD then getting below error.
SQL>Startup
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> recover database using backup controlfile;
ORA-00279: change 1209554452 generated at 02/09/2012 17:02:57 needed for thre
1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCH1_59501_657865393.DBF
ORA-00280: change 1209554452 for thread 1 is in sequence #59501
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCH1_59501_657865393.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCH1_59501_657865393.DBF'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
here required PRDARCH1_59501_657865393.DBF while PRD server have PRDARCHARC59501_0657865393.001
I did change the LOG_ARCHIVE_DEST parameter in initSID.ora of DR server and not in PRD.
please tell that, how can i apply PRD's archive (.001 extension) on DR.
Regards,

hi all,
after recommendation , now parameter values on DR server is :
*.log_archive_dest_1='LOCATION=F:\oracle\PRD\oraarch\PRDarch'
*.log_archive_format='%t_%s_%r.001'
when i try to apply
SQL> recover database using backup controlfile;
ORA-00279: change 1211443555 generated at 02/10/2012 23:36:05 needed for thread
1
ORA-00289: suggestion : F:\ORACLE\PRD\ORAARCH\PRDARCH\1_59557_657865393.001
ORA-00280: change 1211443555 for thread 1 is in sequence #59557
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
auto
ORA-00308: cannot open archived log
'F:\ORACLE\PRD\ORAARCH\PRDARCH\1_59557_657865393.001'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
if you see that the required archive is: 1_59557_657865393.001
while copied archive exist with this name: PRDARCHARC59557_0657865393.001
I tried to change in Format parameter to make required format but
Exp:
%t_%s_%r.001
1_59557_657865393.001
ARC%s%r%t.001
ARC595576578653931.001'
ARC%s_%r%t.001
ARC59557_6578653931.001
ARC%s_%r.%t
ARC59557_657865393.1
PRDARCHARC%s_%r.%t
PRDARCHARC59557_657865393.1
Required Format: PRDARCHARC59540_0657865393.001
how can i resolve this different name issue? please suggest me required format.
Regards,

SCCL Msg: "Cannot open log \\hostname-l\sapmnt\trans\log\CC00000n.NSP"

Similar Messages

Maybe you are looking for