Schedule 3 reports to one xls fil????e

hi all.....
using ibots i have scheduled 3 reports which are present on my dashboard. i want all these 3 reports to be saved as .xls under 3 sections but under a common excel file..
how can this be achieved???
regards
mahi
Edited by: Mahis on Dec 27, 2010 4:30 PM

Hi Mahi,
I know Venkat has blogged about this subject in the past; http://oraclebizint.wordpress.com/2008/02/07/oracle-bi-ee-101332-combining-multiple-excel-report-outputsworkbooks-to-a-single-excel-report-using-bi-delivers-bi-publisher-apis-and-vb-scripts/
Never tried this out myself, but maybe it works for you.
Good Luck,
Daan Bakboord
http://obibb.wordpress.com

Similar Messages

  • Scheduled report subscription only writes file once

    Early in our SCCM 2012 roll out we want regular updates how many machines are active.
    We have configured a Report Subscription to save the report as an XLS file on a file share - Daily schedule for 08:00AM - the first file was forced at 11:23AM on 17/09/2013 and the daily updates were not generated though the schedule ran and reported the
    failure.
    The subscription writes one file to the share at first scheduled time and at next scheduled time reports "Failure writing file \\Server\share\reports\file.xls : a log on error occurred when attempting to access the file share. The user account or password
    is not valid"
    To confirm username and password I logged on to a Win7 workstation with those credentials. I then browsed to the reports directory on the share and created a new blank file. THis confirmed credentials are correct and the user has permissions to write new
    files to the share.
    By changing something about the subscription delivery (e.g. overwrite files or increment file names or changing the file name) the next schedule will write the file. I am forcing the re-try by changing the schedule time and receiving the above error.
    The original schedule was Daily and changing the time to get it to re-run today caused the failure. When I changed the schedule to Hourly (every 5 minutes) and changed the file name the report ran every 5 minutes successfully. I have reverted to the Daily
    schedule ans set it to run at 7am so we'll see next week whether this has resolved the problem
    It is clear that the message is not accurately describing the problem.
    Anthony

    Hi,
    Windows File Share Delivery Options
    There are three options for overwriting. The second option-Do not overwrite an existing file-demonstrates that
    if the report file already exists, no action will be taken.
    Overwrite   an existing file with a newer version
    If   the report file already exists, it will be overwritten with the new version.
    Do   not overwrite an existing file
    If   the report file already exists, no action will be taken.
    Increment   file names as newer versions are added
    If   the report file already exists, the new report will have a number added to   the file name to distinguish it from other versions.
    For more information, please review the link below:
    Create Subscription Wizard - Subscription Delivery Page
    http://technet.microsoft.com/en-us/library/cc678423.aspx

  • Extra Rows in the Crystal Report while generating XLS files

    I was tring to gerate a xls file in crystal reports which has four sub-reports but while getting the output it gives a blank row for every 51 rows or so one of the subreport which has bult data. Let me know if any one can help me out in this consern.

    What about answers to questions 2 and 3?
    2) What CR Service Pack are you on?
    4) Assuming you are using a stand-alone version of CR, how's the export from the CR designer?
    It may be that continuing this thread is not worth while if I can not get the basic info(?). Creating a phone case may be an option for you:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • Scheduled report error - Error in File

    Crystal Reports Serve XI R2 SP4
    Microsoft SQL Server 2005
    Hi,
    Ihave a scheduled report that runs perfectly in most instances, however I am seeing the following eror message when a particular parameter is seected:
    Error in File D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\BWAQTSREP-1.reportjobserver\~tmp1d945a07834566a.rpt: Operation not yet implemented.
    Any ideas on what this means, and how to resolve?
    Thanks!
    Penny
    Edited by: Penny Braithwaite on Apr 3, 2009 11:51 AM

    Hi Ramesh,
    you have to Login into the SAP Service Marketplace at http://service.sap.com. But you need a S-User to do so.
    You can request your S-User on the top right of the Website.
    Regards
    -Seb.

  • How to run more than one .xls file one by one in sequence order through inf

    Hi All,
    i have an requirement in informatica like, i need to call Sequence of Excel files ie(contact1.xls,contact2.xls ...etc ) through the infomratica mapping->workflow. this number of .xls files also not constant ie it might be 5 today , for the next run it might be 10..etc. its like For each loop kind of . once it loaded one by one .xls data into table the loaded file need to moved to Archive Folder .How can i achieve this with informatica mapping and informatica work flow?
    thanks in advance

    hello
    try selecting the photos that you want however many- go, File then Export.
    you can make all your file selections image size etc and then save them direct to your PS file.
    hope this helps.
    cjp

  • Reports in .pdf , .xls files....

    Hi,
    I have a requirement that the reports should be extracted/printed in .pdf and/or .xls files....
    I know that these types of files can be generated via the use of XML Publisher... So , do i have to develop the reports using the XML Publisher only(without the use of report builder).... in order to cover this requirement.....????
    Note: i use EBS 11.5.10.2
    Thank you,
    Sim

    Sim,
    That is correct. However, you can generate PDF reports using Reports Builder in 11i with some restrictions.
    Note: 443778.1 - How To Generate And Print Reports In PDF Format From EBS With The UTF8 Character Set
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=443778.1
    Oracle XML Publisher User's Guide
    http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115xdoug.zip

  • Microsoft Excel reports me what xls file is not Excel format. Is there any way to fix this problem?

    How to repair xls file? Microsoft Excel reports me what file is not Excel format.

    To repair xls file you may tre demo version of Excel Repair Toolbox , but sometimes recovery
    function in Microsoft Excel are not helpful so in that cases you can use third-part tool for recovery bad tables. Install it from here: http://www.excel.repairtoolbox.com/

  • Export of report data in XLS file

    Hi,
    I need to analyze and manipulate reports output (pdf or html css) in XLS fomat.
    any idea how can i do it?
    Thanks
    Vishal

    Vishal,
    You can generate the report output in delimited format and open it in Excel as a csv file
    Thanks
    Rajesh

  • How to Re-Run 100 scheduled reports at one time on failure of running?

    Hi All,
    I scheduled 400 reports in the Crystal Reports Server.
    Suppose, out of 400 if 100 over reports are failed to run due to various reasons then how to filter and Re-Run only those 100 reports at a time without triggering each and every report.
    Please Advice.
    Thanks,
    Sriram

    Hi,
    can someone advise us on this issue, please?
    thanks,
    Sriram

  • Schedule Report Error - Error in File (Operation not yet implemented)

    Crystal Reports Server XI R2
    Microsoft SQL Server 2003 SP2
    We have a report that is run for 100s of Schools once a month.  We started getting the below message.  We tried to manually run the report from the CMC and get the same message. 
    Any suggestions on how to resolve this?   
    Thanks,
    Lisa
    Status: Failed
    Printer: The instance is not printed.
    External Destination: None
    Data Refresh Settings:  Use the server defaults
    Start Time 4/7/09 3:10:21 PM
    End Time 4/7/09 3:10:33 PM
    Server Used: CO-APT01.reportjobserver
    Error Message:  Error in File D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Data\procSched\CO-APRT02.reportjobserve\~tmp4cc5a1e77c49110.rpt:  Operation not yet implemented.

    Hi Rene,
    Try this as remedy to your problem.
    Whenever you are using the New Page before for a Group, go to Section Expert for the corresponding section and check the New Page Before property and go to Conditional formula and type the following:
    Not OnFirstRecord
    Whenever you are using the New Page after for a Group, go to Section Expert for the corresponding section and check the New Page After property and go to Conditional formula and type the following:
    Not OnLastRecord
    HTH...
    Thanks,
    Amogh

  • How does one view all scheduled reports?

    I am scheduling 12 reports to run monthly. I don't find any view in which to see all of my scheduled reports, in order to verify  success (or failure) of last instance run, to delete or modify a report's schedule, etc.
    I also see no such "I am scheduled" indication or view on individual reports.

    Hi Randy,
    To add to John's response, you would be able to get the list of all schedules, through the
    1. Instance manager. Log on to CMC and go to instance manager to see all your report schedules.
    2. You can always navigate to a reports history to view its instances.
    3. Run the below query in the Query Builder (AdminTools) application to get the list of schedules
    SELECT SI_ID,SI_NAME,SI_PARENTID FROM CI_INFOOBJECTS WHERE SI_INSTANCE=1
    The above query would bring you 1000 results of all the report instances in the CMS database, irrespective of the kind of the report.
    You can fine tune your query as per your requirement if you need to get the instances of particular report. Below is the query to get instances for a particular report
    SELECT SI_ID,SI_NAME FROM CI_INFOOBJECTS WHERE SI_PARENTID=<ReportId for which you need to get the instances> AND SI_INSTANCE=1
    4. By using BusinessObjects SDKs. For working with BO SDKs, you would need to be familiar with the 3rd option above as through the code you would be executing similar queries to CMS database to get the results in your application.
    Regarding your query 'We want to have the ability to let any users go to one page/or click a link in webi and the page would show all of that user's scheduled reports in one single list where they can view and edit the report's schedule.. I wonder if that is possible to achieve'
    This is surely possible using the BusinessObjects sdks. For more queries regarding it, you would probably have to post your questions in the java sdks space. Below is the link for the same.
    http://scn.sap.com/community/bi-platform/java-sdk
    Thanks,
    Prithvi

  • Reports to XLS files

    Hi All,
    Needed some urgent informarion:
    1. Can we export reports from Oracle Reports 10g to XLS files? If yes, how is this done? Any documentation available?
    2. Can reports from developer suite be pushed to a dot matrix printer? If yes, how is this done?
    Needed this information on high priority. Any suggestions would be helpful.
    Thanks

    Hello,
    If you are using Reports 10gR2, you can use DESFORMAT=SPREADSHEET
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwwhthow/whatare/output/output_a_simpleexcel.htm
    Oracle Reports 10g Release 2 (10.1.2) introduces a spreadsheet output format, which enables you to generate output with rich formatting from paper layout reports to Microsoft Excel-compatible HTML format that can be directly opened with Microsoft Excel 2000 or higher.
    If you are using an "older" version, you have to generate a CSV file (comma separated values) with DESFORMAT=DELIMITED or DESFORMAT=DELIMITEDATA
    For your question 2 , if you are on Windows, Reports will use the Windows Printer Driver to send the output to the printer. So it will work even for a Dot Matrix Printer
    Regards

  • Bursting entire report as a single file by using Data Template

    Hi,
    I have created a report by using data template, which consists of 3 queries.
    Is it possible to burst the entire report in one single file? without splitting based on any criteria?
    Something like I want to use a constant value key so that report will split into one file ONLY.
    Please advice.
    Regards
    Muarli.

    You are right in saying that I dont want to use the burst option.. but the problem with FTP delivery, is that I can't pass the date parameter in the file name. Only fixed single file name is provided there..
    Work around for this is to use bursting option to pass corresponding parameter value in output file.
    I'm facing the problem that by using data template source, I can't burst in enterprise edition based on SQL statement.
    Getting the below error:
    oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerException
         at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2116)
         at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
         at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
         at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    Caused by: java.lang.NullPointerException
         at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.java:2018)
         ... 3 more
    Bursting Definitions I used are as below.
         Bursting Node          /SCHEME_SETT_SUMMARY/LIST_G_VALUE_DATE/G_VALUE_DATE/ssc_code
         Delivery Node           /SCHEME_SETT_SUMMARY/LIST_G_VALUE_DATE/G_VALUE_DATE/ssc_code
    But the same report is running and I can schedule by using FTP delivery without bursting option successfully.
    Please assist in resolving this issue.
    Regards
    Murali.

  • How to import xls file to BPA11gR1

    I got business flow from customer,one xml and one xls file.
    I imported xml file as following:
    New a database.
    Run BPA(11gR1) and open above database.
    Right-click on the group and select Evaluate/Start macro. The Macro Wizard opens.
    Select the "Import Process Generator table (XML)" macro in the Macros field and click on Next.
    Specify the output settings.
    Click on Finish. The Open dialog opens.
    Select the XML file and click on Open. The data is imported.
    I can not found ProcessGenerator import(EXCEL)" in the macro filed.
    so that I try to import xls file with above method,however I do not see any result.
    I would like to know if any of you could help me,thanks.
    Edited by: user780419 on Mar 5, 2012 9:02 PM
    Edited by: user780419 on Mar 5, 2012 9:14 PM

    step1:save the xls file as .csv format to your oracle dir path.
    step2:create external table using below command
    CREATE TABLE EXT_TABLE(+col1 datatype,col2 datatype.....+)
    ORGANIZATION EXTERNAL
    (TYPE ORACLE_LOADER DEFAULT DIRECTORY directoryname
    ACCESS PARAMETERS (
    RECORDS DELIMITED BY NEWLINE
    FIELDS TERMINATED BY ','
    OPTIONALLY ENCLOSED BY '"'
    MISSING FIELD VALUES ARE NULL
    LOCATION('+filename.CSV+')
    REJECT LIMIT 0;

  • I'm one of the few idiots in the world who use the "Pages" App. Whenever I open an XLS file. "Numbers" quits - siting use of SFCompatability plugin. Reports to Mac. Problem remains constant?

    I'm one of the few idiots in the world who use the "Pages" App. Whenever I open an XLS file. "Numbers" quits - siting use of SFCompatability plugin. Reports to Mac. Problem remains constant?

    When you get the SF Compatibility plug in message something in the installed iWork part is corrupt. You ned to uninstall and install iWork again
    You cannot completely delete iWork by moving the iWork '09 folder to the Trash. Instead, use Yvan Koenig's script:
              •          Go to http://www.box.com/s/00qnssoyeq2xvc22ra4k
              •          Choose public_YK > for_iWork'09 > other_iWork'09 items
              •          Click on uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button
    Restart the computer and install from the iWork disc. Do the Software updates too.

Maybe you are looking for