Schroot: Chroot setup failed: stage=setup-start

$ schroot -p opera
/usr/lib/schroot/schroot-mount: symbol lookup error: /usr/lib/schroot/schroot-mount: undefined symbol: _ZN5boost10filesystem6detail10status_apiERKSsRi
E: Arch32-9a3a3cfd-bb6d-4e13-bdb6-4b7c237623f6: Chroot setup failed: stage=setup-start
I followed the wiki, daemon is started. I just don't understand what this error means. Looks to me like it's trying to mount UUID and can't.
opera, firefox, etc work fine if I chroot /opt/arch32. Just schroot fails. Does anyone else have this working at the moment?

I'm not using testing, but have this same error.
Edit...
I removed schroot
pacman -R schroot
Deleted /etc/schroot
Then building schroot with abs seems to have fixed the problem, although I'm not sure what the original problem was.
also, If you're like me and often open programs using a different locale, you need to specify the locale befor the schroot command...
LANG=zh_CN schroot -p firefox
It's a little different than how dchroot works.
Last edited by Leigh (2008-10-16 09:46:15)

Similar Messages

SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... DC2 failed test Advertising Starting test: FrsEvent

Hi All,
I have the environment like DC1- 2k3 Service Pack 2 which is holding FSMO roles and now I build a new ADC DC2 – 2k8 R2 OS on different location (Subnet) . After completing ADC I run the DCDAIG on DC2 where I am getting below error
Not: I tried the configuration D4 and D2 for Burflag but no luck
Note: DC1 and DC2 both are on different location with different subnet.
Any suggestion or solution please
Doing primary tests
   Testing server: indai\DC2
      Starting test: Advertising
         Warning: DsGetDcName returned information for
         \\DC1.test.com, when we were trying to reach
         DC2.
         SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
         ......................... DC2 failed test Advertising
      Starting test: FrsEvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared.
Failing SYSVOL replication problems may cause
         Group Policy problems.
Starting test: NCSecDesc
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=DomainDnsZones,DC=mh-man,DC=biz
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=ForestDnsZones,DC=mh-man,DC=biz
         ......................... DC2 failed test NCSecDesc
      Starting test: NetLogons
         Unable to connect to the NETLOGON share! (\\DC2\netlogon)
         [DC2] An net use or LsaPolicy operation failed with error
         67, The network name cannot be found..
         ......................... DC2 failed test NetLogons
Starting test: SystemLog
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:40:54
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x00000032
            Time Generated: 09/17/2014   16:40:54
            Event String:
            The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal
network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:41:53
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:43:06
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:45:15
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:47:14
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:48:22
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:49:34
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:50:45
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:52:55
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         An error event occurred. EventID: 0x00000406
            Time Generated: 09/17/2014   16:52:59
            Event String:
            The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will
automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when
Group Policy is successful.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:54:21
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:58:35
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   16:59:48
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   17:00:59
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   17:02:11
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   17:03:24
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   17:05:39
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x0000008E
            Time Generated: 09/17/2014   17:06:47
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred. EventID: 0x00000018
            Time Generated: 09/17/2014   17:11:36
            Event String:
            Time Provider NtpClient: No valid response has been received from domain controller DC1.test.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: The peer is unreachable.
         ......................... DC2 failed test SystemLog
Pradip Sisodiya

Hello,
please upload the following files so we could understand your setup:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Why does a BPM Process fail at the Start Activity?

Hello All,
We're currently working on a Dev environement (WLS 10.3), where we're experiencing issues with BPM Processes that fail at the start node. The error observed is a "Null Pointer Exception" despite there definteily being parameters passed into the process.
I've observed the trace in the EM after invoking the process and notice that the process fails as soon as it enters the start activity.
One of the possible explanations could be an out of memory issue. Has anyone experienced this before?
BPM : SOA Suite 11g.
Thank you.

If you have memory - issues, you should look at the Weblogic-logs.

Hello. I keep my IPhoto library (about 90GB) on an external HD and am trying to back it up to another external drive. Both are formatted Mac OS Extended (Case-sensitive, Journaled). Recently, backup has failed from the start due to error 36. Howtoresolve?

Hello. I keep my iPhoto library (about 90GB) on an external HD and am trying to back it up to another external drive. Both are formatted Mac OS Extended (Case-sensitive, Journaled) and both check out when scanned with Disk Utility. Recently, backup has failed from the start due to error 36. Any ideas how to resolve? Also, what's the maximum recommended size for an iPhoto library file? Thx!

Since you can't drag the library to the other EHD for the backup see if you can duplicate it (if you have enough room on the drive) by selecting it and typing Command+d (duplicate).
If you do rebuild the library without a backup and it goes awry you won't lose your photos but you may lose your orgnaizational efforts. So try the following:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library in the location of your choosing based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
NOTE: Fix 2 above might be the method you might want to try first with iPLM creating the new library on your second EHD. If it works that would get your backup copy on the second EHD at the same time as repairing it. If it does'nt work then go back to Fix 1.
OT

OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"

OBIEE-11g installation failed in "opmnctl start coreapplication_obips1"
it is the lost step of OBIEE-11g installation and it failed "opmnctl start coreapplication_obips1".appriciate for early reply.
"opmnctl task failed" Taks executing "opmnctl start coreapplication_obips1" is failed.OBIEE Guru's help urgently.
Edited by: RAGHAVENDRA HARI N on Sep 11, 2012 5:09 PM

Hi, check the server logs inside <@yourBIPath>/bifoundation/diagnostics/OBIEEPresentationservicecomponent and OBIEE servercomponent.
This may sound silly, but are your servers&the nodeman up and running?
Regards,
D

Failed to send start signal for complete cluster, SLD may still be stopped.

Hello,
I am trying to create technical systems in the SLD on the portal (http://host:port/sld). It prompts me to start the SLD server by going to Administration.
When I click the button "Start Server" under Administration, I get this following error message:
"Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
Can you please tell me what has to be done to successfully start the SLD server so that I can go ahead and add technical systems.
Thanks
Srinivas

Hi Siddarth,
I checked MMC. There is only one instance running.
Here is the structure in MMC.
Database
Instance 0
Instance 1
Instances are green and running.
Here is log on the server:
#28 12/12/2008 07:43:44.413 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.start.StartDirector: SLD start failure, unable to activate the SLD CIMOM. Check the log of the persistence medium for any errors. If the error is reproducible, please send a message to SAP. More...
#27 12/12/2008 07:43:44.397 [SAPEngine_Application_Thread[impl:3]_15] FATAL com.sap.lcr.objmgr.core.TransactionContainerChangeBuffer: Storing changes to cache failed. Please restart the application to reinitialize the cache.(Error: CIM_ERR_FAILED: Failed to initialize cluster notification sender.) More...
#26 12/12/2008 07:43:44.382 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
#25 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.webui.CimIO: Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes.
#24 12/12/2008 07:43:44.288 [SAPEngine_Application_Thread[impl:3]_15] ERROR com.sap.lcr.cimsrv.ClusterNotificationSender$JMSSender: Failed to initialize cluster notification sender. Please check your JNDI service and JMS provider for errors. More...
What could be the problem.

Solaris 10: BIND 9 Chroot Service fails to start with SVCADM but works when

I recently upgraded with Solaris patches and after the reboot my Bind Named services (DNS) go into maintenance mode.
bash-3.2# svcs -xv
svc:/network/dns/server:chroot (?)
State: maintenance since Thu Nov 01 00:22:19 2012
Reason: Start method failed repeatedly, last exited with status 1.
See: http://sun.com/msg/SMF-8000-KS
See: man -M /usr/man -s 1M named
See: /var/svc/log/network-dns-server:chroot.log
Impact: This service is not running.
Output from var/svc/log/network-dns-server:chroot.log below
[ Nov 1 00:22:19 Executing start method ("/lib/svc/method/dns-server start chroot") ] dns-server: Executing: named -t /var/named/chroot/named -c /etc/named.conf /lib/svc/method/dns-server: named: cannot execute dns-server : start failed! Check syslog for further information. [ Nov 1 00:22:19 Method "start" exited with status 1 ]
I can run named -t /var/named/chroot/named -c /etc/named.conf manually from as root from the command line the named process starts and DNS works.
I thought this had something to do with permissions/file ownership or something like that. I have tried changing (chown/chgrp)the /var/named/chroot/named directory to root root and named root. I also did the same with the /var/named/chroot/named/named binary. I also tried the same types of things with the /etc/named.conf file. So far no luck.
Any suggestions on how to figure this out would be greatly appreciated.

Just read the mentioned thread because the answer is in it and duplicating that seems useless. Don't make it seem like you want the answer to be presented on a silver plate

Installer can not initialising when i setup starting of photoshop CS6

When i start the setup of Photoshop ,there is a interupt and
a messsage is " Installer can not inizialising " ?!
what can i do ?
My system is win 8.1 64bit
leothon

Not following you, Leothon. Sorry. Would you care to elaborate and to give more detailed information?
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why won't my creative cloud setup start?

I'm working on a PC and when I downloaded creative cloud, the set-up icon showed up in my downloads folder, though when I double click on it, it won't start. It will ask me whether I want to run the program and when I click run, the window will then start to blink feverishly and then, nothing. Anyone have any ideas?

HerphotoshopD have you had any other Adobe Creative software titles installed on this computer previously? Please utilize the steps listed in Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html to reinstall the Creative Cloud Desktop application.

Scponly with chroot setup but user can STILL forward ports... [SOLVED]

I'm using scponly and have chrooted a user to his home directory. I noticed however that I can ssh into the box enabling port forwarding which is a dangerous security breach in my opinion. I'd like to have the ability keep port forwarding for other users, but for the scponly user, I'd like to disallow ssh port forwarding. Anyone know how?
$ ssh nightshade -P 8081
username@nightshade's password:
Welcome to nightshade
Last edited by graysky (2009-09-25 19:08:26)

Turns out this can be accomplished by the addition of two new lines to the sshd_config:
Match user USERNAME
AllowTcpForwarding no

Mail 4.5 Yahoo new setup -starts to download messages but stops at 148 out of 2800 and stops - please advise

Set up for Yahoo plus - when it starts downloading messages it stops at 148 and does not continue. Tried deleting account and starting again. It just runs to 148 (oldest ones) and stops. What settings can I adjust to get ALL my emails to download. They are not large files either. Tried adding a max size value of 5 M and still did not change situation.

You probaly would have better luck getting assistance from the Yahoo support site, if they have one. Good luck!

How to setup start url

Hi.
I've created an application. It now runs from http://localhost/TestApp/main/Index
And
http://localhost/main/Index
If I try
http://localhost
it displays the index.html file in the documents folder.
How can I edit so that it shows main/Index when I point my browser to http://localhost?
(I'm using appserver 7, the Virtual server Default Web mode is set to the deployed application)

ok.
I've tried that too.
And that gives me the url http://localhost/TestApp/main/Index
Both the url's is showing me the correct page. It's the long URL I don't like.
(I'm used to apache where I can create a rewrite rule. That would have solwed the situation.
But I now have the sun One webserver 6.1 installed, using the application server pluggin. So I don't want to install apache.)

Hard Disk fail, won´t start

Hi, I got my HD with two partitions. One for Windows XP and the other for Mac.
If started on Mac, keeps on grey startup screen.
I´ve tried starting with DVD system and running First Aid, but it stopped saying there´s a problem.
Hardware Test reports also that there are a hardware problem, its code is
4MOT/2/4000000004: 0X7C70D910
I got a little hope in recovering my files, since I still can login in XP (where I am writing this) From XP I can´t see Mac partition
I just want to recover my files... Any tip thay may try?

As long as you have been using Time Machine or some other backup scheme on your computer your OS X data is fine. If not you about to learn why backup is critical. If you can still boot into the Windows partition then backup your data immediately. You are correct you have a failing HD. Once it has been replaced you can us Setup Assistant to restore from your backup. If you need help with what SA is and how it works please read this article:
http://web.me.com/pondini/AppleTips/SetupAsst.html
Good luck!
Roger

Expand Primary Site - Fail on Getting Started

Hello All,
I am trying to my client's Stand-alone Primary into a newly created CAS. When I attempt to run the standard steps (Following best practices from Microsoft) from either the .iso direct from the VL site - or expanded onto the disk (Tried several downloads
- all with the same results) - I get no further than The Getting Started screen of the setup Wizard
Literally, the only options available are to Recover a site and/or Uninstall
I'm open for ideas?
Cheers! -Bryan Bryan D. Barboza | Solutions Architect M: 858-429-3000 | D: 858-429-3078 |C: 714-396-4417

To explain further..
I have two Stand-Alone Primary sites. The Manager wants to retain the site structure - but enable standards at a global level - hence the reason for a CAS (Also - the business is growing very well and may shortly require a CAS).
The third server in question is a CAS with no child primaries attached. The goal is to expand the existing Stand-Alone Primary servers into the third server - CAS.
When running Install from the .iso or an expanded iso (Contents expanded from .iso into a local folder), I start the expansion process. I get one or two screens into the wizard when the only options available are to either Recover a Site or Uninstall
SCCM altogether. All other options are Greyed out.
I have Local Admin (For Application) and Sysadmin (For SQL Server) privileges.
Cheers! -Bryan Bryan D. Barboza | Solutions Architect M: 858-429-3000 | D: 858-429-3078 |C: 714-396-4417

Is there a way to delete the elements on the stage that start with / Stage_

I'm not sure when it happened, but I noticed that in edge some of my stage elements have dupes below the list of regular elements. When hovered over they say <div> "NAME_OF_DIV" (static) (NAME_OF_DIV is just meaning that it can have many different names there, but they all start with Stage_)
I've attached a screenshot to show you what I mean
I've blocked out some of the names since the titles are not for public eyes
But you can see what I mean, and the kicker is that some of those elements are getting into my code, so if I target one of them (the real one like "tile_explore" with a compositionReady it's bunging up the works saying it's undefined since Stage_title_explore hasn't been set yet I'm guessing?).
Anyone have any insight as to how I can get rid of those extra ones below, it'd be a life saver (since I'm getting a bunch of text under my main UI that I don't want)
The Answer!
Answering my own question in case others come about it. At one point I exported as static HTML on one machine, but then loading the file on another didn't retain that option in the publish settings. Also it would seem that it didn't even finish the HTML (didn't close the <body> and <html> tags) so I added those back in after removing all of the static HTML divs and everything is great again!

Welcome to the Apple Community.
You can't remotely delete anything on their device, but if they are logged in, even if they don't know your password, they can continue to receive any new data you add to iCloud. To stop this you should change your password.

Schroot: Chroot setup failed: stage=setup-start

Similar Messages

Maybe you are looking for